Problem: Message lines from multiple message events that end up
spilling 'cmdheight' end up spread out over the cmdline
and "more" window.
Messages emitted as feedback to a typed :command (rather than
its sole purpose like :echo/:=) are routed to the more window.
The more window isn't closed when entering the cmdwin, and
doesn't allow `vim.hl.on_yank()`.
Solution: When first opening the "more" window for spilled messages,
move the message buffer to the more window.
Restrict routing of typed commands to echo kinds.
Ignore all events but WinLeave and TextYankPost.
Problem: Shebang filetype detection can be improved
Solution: Improve detection logic (Eisuke Kawashima)
Vim does not correctly detect filetype from
- `#!/usr/bin/env --split-string=awk -f`
- `#!/usr/bin/env -S -i awk -f`
- `#!/usr/bin/env -S VAR= awk -f`
So update the current detection logic to detect those cases.
closes: vim/vim#17199f102f4c2e8
Co-authored-by: Eisuke Kawashima <e-kwsm@users.noreply.github.com>
Problem: It is difficult to ignore all but some events.
Solution: Add support for a "-" prefix syntax in '(win)eventignore' that
subtracts an event from the ignored set if present
(Luuk van Baal).
8cc6d8b187
Problem: `TSLangInfo` annotation does not reflect the structure returned
by `vim.treesitter.language.inspect()`.
Solution: Move version information under new (optional since ABI 15 only)
`TSLangMetadata` field.
Problem:
vim.uv.spawn will emit ENOENT for either when the cmd or cwd do not
exist and does not tell you which.
Solution:
If an error occurs, check if cwd was supplied and included in the error
message if it does not exist.
Problem: missing info about register completion in complete_info()
(after v9.1.1408)
Solution: update documentation and mention that register is used as
source, add a test (glepnir)
closes: vim/vim#1738949864aecd0
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: not easily possible to complete from register content
Solution: add register-completion submode using i_CTRL-X_CTRL-R
(glepnir)
closes: vim/vim#173540546068aae
Problem: Unable to emit a message with arbitrary kind.
Solution: Add a "kind" opts field to nvim_echo().
Use it to set the "list_cmd" kind for vim.show_pos().
Problem: Calculated cmdline cursor position can be smaller than 0.
Prompt part of the cmdline is translated, while it should
support "\t" characters.
Solution: Remove prompt part from the stored "cmdbuff" and get rid of
dubious +/-1 from cmdline cursor calculation.
Problem: An already open "more" window is the most convenient place
to route messages to with `cfg.msg.pos == 'cmd'`. Instead we
route to the cmdline (unless that message also exceeds
'cmdheight').
Solution: Route to "more" window while it is open and scroll to bottom
to show the newest message. This is more convenient and more
efficient due to not writing to the target buffer first (which
is done to calculate the height of the message).
(Ensure message highlights are deleted when text is replaced.)
Problem: Bulking message lines to write in a single API call is
complicated and still not correct w.r.t. overwriting
highlights.
Solution: Write each chunk pattern separately with it's highlight
such that it will be spliced correctly for message chunks
that contain a carriage return. Go with correctness over
performance until this proves to be too inefficient.
Also add an identifying name to the various extui buffers.
Problem: Using tracked message column as column in cleared buffer.
Solution: Ensure column does not exceed current line length.
Further work to ensure carriage return and cmdline block mode
work properly.
Problem: "99 searchcount ought to be enough for anyone."
Solution: Increase `SEARCH_STAT_DEF_MAX_COUNT` to 999, which I'm sure
will suffice for the next twenty years.
Co-authored-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Problem:
Some LSPs cause the following completion error (reformatted slightly):
Error executing vim.schedule lua callback:
.../runtime/lua/vim/lsp/completion.lua:373
attempt to index field 'range' (a nil value)
This is because an internal function assumes edits are either missing
or of type `TextEdit`, but there's a third [possibility][0] that's not
handled: the `InsertReplaceEdit`.
This was previously reported in at least two issues:
- https://github.com/neovim/neovim/issues/33142
- https://github.com/neovim/neovim/issues/33224
Solution:
Don't assume the edit is a `TextEdit`. This implicitly handles
`InsertReplaceEdit`s.
Also, add a test case for this, which previously caused an error.
[0]: 2c07428966/runtime/lua/vim/lsp/_meta/protocol.lua (L1099)
Problem:
Because the buffer in the window may change before the request is completed, foldclose() might be executed on the wrong buffer.
Solution:
Avoid that.
|vim.glob.to_lpeg()| uses a new LPeg-based implementation (Peglob) that
provides ~50% speedup for complex patterns. The implementation restores
support for nested braces and follows LSP 3.17 specification with
additional constraints for improved correctness and resistance to
backtracking edge cases.
Problem: A "search_cmd" message alters the message state (since 8e8f4523),
unnecessarily affecting logic for messages that follow.
Solution: Reset the appropriate variables after a "search_cmd" message.
Don't show "search_cmd" message with zero 'cmdheight'.
The root_markers field can now contain a table of tables (as of
https://github.com/neovim/neovim/pull/33485) and :checkhealth will show
an error in that case since Lua cannot concatenate a table of tables.
Ensure that tables contain strings before concatenating and if not, fall
back to using vim.inspect().
Problem:
No way for a user to limit 'exrc' search in parent directories (compare
editorconfig.root).
Solution:
A configuration file can unset 'exrc', disabling the search for its
parent directories.
Problem:
The exrc file in the current directory is executed twice, here and in
`do_exrc_initalization()`.
Solution:
Start search from parent directory. Let core handle exrc in current
directory.
feat(logs): show full path of short_src in lsp logs
Problem:
- Cannot gf to info.short_src printed in the logs since only the last 16
characters are printed
Solution:
- Print full info.short_src and remove ...
Problem: <Tab> is not translated on the cmdline, and exposes a wrong
assumption in search messages that may contain multiple chunks.
Solution: Translate unprintable characters in the cmdline content.
Extract the 'search_count' from the last chunk and route
'search_cmd' to cmdline to handle multiple chunks.
Problem: The 'grepformat' option is global option, but it would be
useful to have it buffer-local, similar to 'errorformat' and
other quickfix related options (Dani Dickstein)
Solution: Add the necessary code to support global-local 'grepformat',
allowing different buffers to parse different grep output
formats (glepnir)
fixes: vim/vim#17316closes: vim/vim#173157b9eb6389d
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: Incorrect message highlighting for highlighted message
chunks containing carriage returns.
Solution: Add a highlight for each substring ending in a newline or
carriage return separately.
Problem: Hint message to press "g<" for message that spills
'cmdheight' is too intrusive.
Solution: Remove the hint message. Document the meaning of the spill
indicator instead.
Problem: Carriage return should place the "write cursor" at the start of a line.
Solution: Construct the to be printed line by iterating over carriage returns.
Problem: Decision whether message is sent to "more" window is based on
the number of newlines present in a message, rather than the
actual text height.
With the "box" target, messages that come from a cmdline
entered command are not always routed to the more window.
Solution: Still write the message to the target buffer, and calculate
the actual text height. Postpone updating several state
variables until after the decision to re-route is made.
With the "box" target, only consider the text height of the
message if it is not a message from a cmdline entered command.
Problem: Extui shows a spill indicator to hint to the user to press "g<"
to show the output of the last command. The user may be
unaware of this mapping.
Solution: Route a hint message to the message "box" window.
feat(exrc): search exrc in parent directories
Problem:
`.nvim.lua` is only loaded from current directory, which is not flexible
when working from a subfolder of the project.
Solution:
Also search parent directories for configuration file.
