Merge branch 'master' into redraw-damage-rectangles-new

OSS-Fuzz: Add new fuzzer targets json processing

.github/workflows/regress.yml

@@ -27,10 +27,10 @@ jobs:
             runner: ubuntu-24.04
             make: make
             configure: --enable-utf8proc --enable-asan
-          #- name: ubuntu-24.04-arm64
+          - name: ubuntu-24.04-arm64
-          #  runner: ubuntu-24.04-arm
+            runner: ubuntu-24.04-arm
-          #  make: make
+            make: make
-          #  configure: --enable-utf8proc --enable-asan
+            configure: --enable-utf8proc --enable-asan
           - name: macos-26-arm64
             runner: macos-26
             make: gmake
@@ -72,14 +72,14 @@ jobs:
 
       - name: build
         run: |
-         sh autogen.sh
+          sh autogen.sh
           ./configure ${{ matrix.configure }}
           ${{ matrix.make }} -j"$(getconf _NPROCESSORS_ONLN)"
 
       - name: test
         run: |
           cd regress
-          ${{ matrix.make }}
+          ${{ matrix.make }} -j"$(getconf _NPROCESSORS_ONLN)"
 
       - name: logs
         if: failure()

CHANGES

@@ -9,7 +9,12 @@ CHANGES FROM 3.7c TO 3.8
 
   - modal panes may be created with new-pane -O; a window can have one modal
     pane and it prevents interaction with the other panes while it is active.
-    A modal pane is now used for the editor in buffer mode;
+    -C closes the pane when the mouse is clicked outside it and -K sends all
+    keys, including the prefix key, to the pane. -D closes the modal pane with
+    Escape or C-c. A modal pane is now used for the editor in buffer mode;
+
+  - new-pane -A creates a floating pane which remains above a zoomed pane;
+    modal panes do this by default;
 
   - move-pane and resize-pane can now move and resize floating panes, including
     mouse dragging;
@@ -24,10 +29,18 @@ CHANGES FROM 3.7c TO 3.8
     -k for choose commands kills the pane when the mode exits, which is useful
     for modes in floating panes;
 
-  - pane-border-status has top-floating and bottom-floating, and there are new
+  - command-prompt -P opens a prompt inside a pane rather than on the status
-    default bindings under C-b g for common move and resize operations;
+    line;
 
-  - floating panes are unzoomed before creation to avoid a crash.
+  - pane-border-status has top-floating and bottom-floating, and there are new
+    default bindings under C-b g for common move and resize operations.
+
+* Layout strings now use a JSON subset format which includes floating panes.
+  The old format is still accepted; control mode clients receive old layouts
+  unless they set the new-layouts flag.
+
+* Add remain-on-exit failed-key to keep a pane open after a failed command
+  until a key is pressed.
 
 * Add support for themes and improve default colours:
 
@@ -74,7 +87,7 @@ CHANGES FROM 3.7c TO 3.8
 
   - new hooks to cover areas including client create and destroy, pane
     activity, pane mode and prompt changes, pane movement and resizing, session
-    group changes and window creation, close and zoom;
+    group changes and window creation, close, swap and zoom;
 
   - OSC 133 escape sequences now trigger events: pane-command-started,
     pane-command-finished and pane-shell-prompt.
@@ -87,10 +100,29 @@ CHANGES FROM 3.7c TO 3.8
   while scrolling or while hovered and disappears after pane-scrollbars-timeout
   (Michael Grant).
 
-* Extend the fill-character option so both inside and outside the window can be
+* Add a clear-on-attach server option. When disabled, tmux does not enter the
-  changed.
+  alternate screen on attach and instead scrolls the existing terminal content
+  into the scrollback buffer so it remains accessible (issue 5508).
 
-* Change set-option and set-hooks to use formats and add a -F flag to each.
+* Copy mode can now automatically refresh as pane content changes with the
+  refresh-on, refresh-off and refresh-toggle commands. Automatic refresh is off
+  by default; refresh-now refreshes once and is bound to r. These replace
+  refresh-from-pane (issue 5165).
+
+* Extend the fill-character option so both inside and outside the window can be
+  changed, with a new default for unused areas inside the window.
+
+* Change show-options and show-hooks to use formats and add a -F flag to each.
+
+* Allow individual terminal features to be disabled by adding @ to their names
+  in terminal-features, and add a utf8 feature for terminals which support
+  UTF-8 output.
+
+* Add an appesc terminal feature for mintty's application escape key mode,
+  avoiding unsupported sequences on other terminals (Pete Dietl, issue 5626).
+
+* Preserve existing Ss and Se terminfo capabilities for cursor styles and
+  restoring the default cursor (issue 5476).
 
 * Add a #{A/count:frames} modifier to show a series of frames as an animation
   in the status line (issue 5412 from Fernando Daciuk).
@@ -105,6 +137,12 @@ CHANGES FROM 3.7c TO 3.8
 * Add new-window -E, respawn-pane -E and respawn-window -E as more convenient
   methods to create an empty pane (rather than using '' for the command).
 
+* Add capture-pane -I to include the time each line entered history.
+
+* Various memory leak fixes from Heon Jeong.
+
+* Add a default C-b T binding to change the current pane title.
+
 * Menus now belong to the window, so appear on all clients.
 
 * Dragging over an existing copy mode selection now adjusts it (Michael Grant).
@@ -118,6 +156,13 @@ CHANGES FROM 3.7c TO 3.8
 * Copy mode no longer exits at the bottom while a selection is in progress
   (issue 5349).
 
+* Add copy-mode-current-line-style to set the style of the line containing the
+  cursor in copy mode (issue 5391).
+
+* Copy mode word commands now recognise all Unicode whitespace characters; a
+  space in word-separators matches any Unicode whitespace character (issue
+  5562).
+
 * Add style attributes for dimming colours (dim=) and for hyperlinks (link= and
   nolink) (issues 4842 and 4280 from Moritz Angermann).
 
@@ -128,7 +173,9 @@ CHANGES FROM 3.7c TO 3.8
 
 * Add or improve format variables including client_colours,
   pane_start_command_list, window_manual_width, window_manual_height,
-  pane_last_output_time, pane_modal_flag and window_modal_pane.
+  pane_last_output_time, pane_modal_flag, window_modal_pane, pane_private_modes,
+  pane_output_generation, history_added, history_collected, history_generation,
+  hook_fire_count and hook_fire_time.
 
 * Add additional pane sort orders, and a z sort order for choose-tree so
   floating panes can be sorted by z-index.
@@ -140,15 +187,34 @@ CHANGES FROM 3.7c TO 3.8
 
 * The mouse option now defaults to on.
 
+* The active-pane client flag has been removed.
+
 * Fix send-keys -K so keys are inserted in the correct place in the input
   queue, like keys from key bindings (issue 3476).
 
 * Fix control mode clients hanging on exit if pty data was still queued (Ben
   Maurer, issue 5356), and avoid sending notifications to clients which are
-  already exiting (Ben Maurer, issue 5357).
+  already exiting (Ben Maurer, issue 5357). Queue notifications so they are not
+  sent inside %begin/%end (issue 5458), do not let a stuck client prevent the
+  server from exiting (issue 5444), and reset control mode offsets when a pane
+  is respawned (issue 5498). Bound buffered command replies so a control mode
+  client that stops reading cannot consume unlimited memory (issue 5565), and
+  fix a collision between the output discard and bracketed paste flags (issue
+  5622).
 
 * Fix grouped sessions sometimes being left as unusable command targets while
-  they are being killed (Bryce Miller, issue 5180).
+  they are being killed (Bryce Miller, issue 5180), and prevent reuse of a
+  session with no windows while detaching (Heon Jeong, issue 5620).
+
+* Free wait-for clients when they disconnect and do not run their remaining
+  queued commands (issue 5614).
+
+* Expand formats in run-shell -c like other start-directory flags (reported by
+  Saul Nogueras).
+
+* Fix session alert flag formats to check all windows (issue 5599).
+
+* Do not clear the marked pane when clicking on a pane border.
 
 * Fix choose mode filtering when more than one pane exists (issue 5326), and
   fix an infinite loop in customize mode when a filter does not match.
@@ -159,11 +225,18 @@ CHANGES FROM 3.7c TO 3.8
   status lines, menus, popups, wide characters and floating panes. This
   includes fixes for flicker with alternate screen applications and scrollbars
   (Michael Grant, issue 5351; Noam Stolero, issue 5350; Aung Myo Kyaw, issue
-  5098).
+  5098), and misplaced wrapped lines during partial redraws (Ben Maurer, issue
+  5625).
 
 * Do not crash looking for the next or previous session (issue 5344), or when
   no client is available.
 
+* Fix crashes when destroying a zoomed pane (Romain Francoise, issue 5591),
+  copying from a blank source pane (Kaixuan Li), or opening a mode prompt when
+  the client is offset into the window.
+
+* Avoid an infinite loop when assigning a width to WCHAR_MAX (issue 5602).
+
 CHANGES FROM 3.7b TO 3.7c
 
 * Build with jemalloc on macOS to avoid what appears to be a bug in calloc

Makefile.am

@@ -15,6 +15,9 @@ AM_CPPFLAGS += @XOPEN_DEFINES@ \
 	-DTMUX_LOCK_CMD='"@DEFAULT_LOCK_CMD@"' \
 	-DTMUX_TERM='"@DEFAULT_TERM@"' \
 	-DTMUX_MOUSE=1
+if HAVE_TMUX_SOCK
+AM_CPPFLAGS += -DTMUX_SOCK='"@TMUX_SOCK@"'
+endif
 
 # Additional object files.
 LDADD = $(LIBOBJS)
@@ -174,6 +177,7 @@ dist_tmux_SOURCES = \
 	input-keys.c \
 	input.c \
 	job.c \
+	json.c \
 	key-bindings.c \
 	key-string.c \
 	layout-custom.c \
@@ -187,7 +191,6 @@ dist_tmux_SOURCES = \
 	options-table.c \
 	options.c \
 	paste.c \
-	popup.c \
 	proc.c \
 	prompt-history.c \
 	prompt.c \
@@ -257,7 +260,9 @@ check_PROGRAMS = \
 	fuzz/input-fuzzer \
 	fuzz/cmd-parse-fuzzer \
 	fuzz/format-fuzzer \
-	fuzz/style-fuzzer
+	fuzz/style-fuzzer \
+	fuzz/layout-fuzzer \
+	fuzz/json-fuzzer
 fuzz_input_fuzzer_LDFLAGS = $(FUZZING_LIBS)
 fuzz_input_fuzzer_LDADD = $(LDADD) $(tmux_OBJECTS)
 fuzz_cmd_parse_fuzzer_LDFLAGS = $(FUZZING_LIBS)
@@ -266,6 +271,10 @@ fuzz_format_fuzzer_LDFLAGS = $(FUZZING_LIBS)
 fuzz_format_fuzzer_LDADD = $(LDADD) $(tmux_OBJECTS)
 fuzz_style_fuzzer_LDFLAGS = $(FUZZING_LIBS)
 fuzz_style_fuzzer_LDADD = $(LDADD) $(tmux_OBJECTS)
+fuzz_layout_fuzzer_LDFLAGS = $(FUZZING_LIBS)
+fuzz_layout_fuzzer_LDADD = $(LDADD) $(tmux_OBJECTS)
+fuzz_json_fuzzer_LDFLAGS = $(FUZZING_LIBS)
+fuzz_json_fuzzer_LDADD = $(LDADD) $(tmux_OBJECTS)
 endif
 
 # Install tmux.1 in the right format.

SYNCING.md

@@ -35,7 +35,7 @@ The usual local layout is:
 ```sh
 cd /some/where/useful
 git clone https://github.com/tmux/tmux.git tmux-portable
-git clone https://github.com/ThomasAdam/tmux-obsd.git tmux-openbsd-cutover
+git clone https://github.com/tmux/tmux-openbsd-cutover.git tmux-openbsd-cutover
 ```
 
 The exact directory names do not matter, but the examples below use:
@@ -56,18 +56,19 @@ The cutover repository has three important branches:
 
 # Adding the OpenBSD remote to portable
 
-In the portable repository, add the cutover repository as a remote:
+In the portable repository, add the published cutover repository as a remote.
+This works regardless of which branch is checked out in a local cutover clone:
 
 ```sh
 cd /path/to/tmux-portable
-git remote add tmux-openbsd /path/to/tmux-openbsd-cutover
+git remote add tmux-openbsd https://github.com/tmux/tmux-openbsd-cutover.git
 git config remote.tmux-openbsd.tagOpt --no-tags
 ```
 
 If the remote already exists, update it instead:
 
 ```sh
-git remote set-url tmux-openbsd /path/to/tmux-openbsd-cutover
+git remote set-url tmux-openbsd https://github.com/tmux/tmux-openbsd-cutover.git
 git config remote.tmux-openbsd.tagOpt --no-tags
 ```
 
@@ -77,6 +78,32 @@ Fetch the cutover master branch explicitly:
 git fetch --no-tags tmux-openbsd master:refs/remotes/tmux-openbsd/master
 ```
 
+To merge unpublished changes from a local cutover clone instead, first ensure
+it has an up-to-date local `master` branch. A normal clone may check out
+`automation` and have only `origin/master`; fetching `master` from that clone
+will then fail with `couldn't find remote ref master`.
+
+With a clean cutover working tree:
+
+```sh
+cd /path/to/tmux-openbsd-cutover
+git fetch --no-tags origin
+git switch master
+git merge --ff-only origin/master
+```
+
+`git switch master` creates a tracking branch from `origin/master` if there is
+no local `master` yet. If the fast-forward fails, reconcile the local cutover
+changes before continuing; do not reset them away.
+
+Then, in portable, point the remote at that clone and fetch its local `master`:
+
+```sh
+cd /path/to/tmux-portable
+git remote set-url tmux-openbsd /path/to/tmux-openbsd-cutover
+git fetch --no-tags tmux-openbsd master:refs/remotes/tmux-openbsd/master
+```
+
 # Automated syncing
 
 The normal sync is performed by the GitHub Actions workflow in the
@@ -99,7 +126,9 @@ OpenBSD changes.
 If the workflow fails while merging into portable, do the merge locally and
 push the result.
 
-Start from an up-to-date portable master:
+Start with a clean working tree and an up-to-date portable master. If a merge
+is already in progress, skip to resolving conflicts, or abort it before
+starting again:
 
 ```sh
 cd /path/to/tmux-portable
@@ -108,10 +137,15 @@ git checkout master
 git pull --ff-only origin master
 ```
 
-Fetch the cutover branch:
+Fetch the published cutover branch. Update an existing remote as well, since
+it may point at a local clone without a `master` branch or with a stale one:
 
 ```sh
-git remote add tmux-openbsd /path/to/tmux-openbsd-cutover 2>/dev/null || true
+if git remote get-url tmux-openbsd >/dev/null 2>&1; then
+    git remote set-url tmux-openbsd https://github.com/tmux/tmux-openbsd-cutover.git
+else
+    git remote add tmux-openbsd https://github.com/tmux/tmux-openbsd-cutover.git
+fi
 git config remote.tmux-openbsd.tagOpt --no-tags
 git fetch --no-tags tmux-openbsd master:refs/remotes/tmux-openbsd/master
 ```
@@ -122,7 +156,22 @@ Merge it:
 git merge --no-ff --log refs/remotes/tmux-openbsd/master
 ```
 
-Resolve conflicts by deciding whether portable or OpenBSD owns the file.
+If merging a local cutover branch instead, use the local-clone preparation
+and fetch commands above in place of this fetch block.
+
+When the merge reports conflicts, it leaves the merge in progress. List the
+unresolved files, edit the conflict markers to combine the required portable
+and OpenBSD changes, then stage each resolved file:
+
+```sh
+git diff --name-only --diff-filter=U
+git diff -- path/to/file
+git add path/to/file
+```
+
+For files that should come entirely from one side, decide whether portable or
+OpenBSD owns the file before using the commands below. They replace the whole
+file, including changes outside the conflicting hunks.
 
 Useful commands:
 
@@ -140,11 +189,25 @@ git add path/to/file
 
 This takes the OpenBSD/cutover version of a conflicted file.
 
+For a modify/delete conflict, the side that deleted the file has no version
+to check out. For example, portable generates `Makefile` using autotools and
+does not track OpenBSD's `Makefile`. If Git reports that `Makefile` was deleted
+in HEAD and modified in cutover, keep the portable deletion with:
+
+```sh
+git rm -- Makefile
+```
+
+This removes the OpenBSD file left by the merge; regenerate the portable
+`Makefile` with your usual configure command before building. Use this only
+for the unmerged OpenBSD file, not an existing generated build file.
+
 Before committing, inspect the result:
 
 ```sh
 git status
 git diff --check
+git diff --cached --check
 git diff --cached --stat
 ```
 

cmd-attach-session.c

@@ -91,8 +91,10 @@ cmd_attach_session(struct cmdq_item *item, const char *tflag, int dflag,
 	wp = target.wp;
 
 	if (wl != NULL) {
-		if (wp != NULL)
+		if (wp != NULL) {
+			window_redraw_active_switch(wp->window, wp);
 			window_set_active_pane(wp->window, wp, 1);
+		}
 		session_set_current(s, wl);
 		if (wp != NULL)
 			cmd_find_from_winlink_pane(current, wl, wp, 0);

cmd-capture-pane.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: cmd-capture-pane.c,v 1.68 2026/07/20 11:16:33 nicm Exp $ */
+/* $OpenBSD: cmd-capture-pane.c,v 1.69 2026/09/08 07:31:59 nicm Exp $ */
 
 /*
  * Copyright (c) 2009 Jonathan Alvarado <radobobo@users.sourceforge.net>
@@ -42,8 +42,8 @@ const struct cmd_entry cmd_capture_pane_entry = {
 	.name = "capture-pane",
 	.alias = "capturep",
 
-	.args = { "ab:CeE:FHJLMNpPqRS:Tt:", 0, 0, NULL },
+	.args = { "ab:CeE:FHIJLMNpPqRS:Tt:", 0, 0, NULL },
-	.usage = "[-aCeFHJLMNpPqRT] " CMD_BUFFER_USAGE " [-E end-line] "
+	.usage = "[-aCeFHIJLMNpPqRT] " CMD_BUFFER_USAGE " [-E end-line] "
 		 "[-S start-line] " CMD_TARGET_PANE_USAGE,
 
 	.target = { 't', CMD_FIND_PANE, 0 },
@@ -200,7 +200,7 @@ cmd_capture_pane_pending(struct args *args, struct window_pane *wp,
 				tmp[0] = line[i];
 				tmp[1] = '\0';
 			} else
-				xsnprintf(tmp, sizeof tmp, "\\%03hho", line[i]);
+				snprintf(tmp, sizeof tmp, "\\%03hho", line[i]);
 			buf = cmd_capture_pane_append(buf, len, tmp,
 			    strlen(tmp));
 		}
@@ -259,7 +259,7 @@ cmd_capture_pane_history(struct args *args, struct cmdq_item *item,
 	struct grid_cell		*gc = NULL;
 	struct window_mode_entry	*wme;
 	int				 n, join_lines, number_lines, flags = 0;
-	int				 show_flags, hyperlinks;
+	int				 show_flags, show_time, hyperlinks;
 	u_int				*links = NULL, nlinks = 0;
 	u_int				 i, sx, top, bottom, tmp;
 	char				*cause, *buf = NULL, *line, b[64], *cp;
@@ -342,6 +342,7 @@ cmd_capture_pane_history(struct args *args, struct cmdq_item *item,
 		flags |= GRID_STRING_TRIM_SPACES;
 	number_lines = args_has(args, 'L');
 	show_flags = args_has(args, 'F');
+	show_time = args_has(args, 'I');
 	hyperlinks = args_has(args, 'H');
 	if (hyperlinks)
 		links = xreallocarray(NULL, gd->sx, sizeof *links);
@@ -358,6 +359,7 @@ cmd_capture_pane_history(struct args *args, struct cmdq_item *item,
 			free(line);
 			continue;
 		}
+		gl = grid_peek_line(gd, i);
 
 		if (number_lines) {
 			if (i >= gd->hsize)
@@ -368,11 +370,16 @@ cmd_capture_pane_history(struct args *args, struct cmdq_item *item,
 			if (n >= 0)
 				buf = cmd_capture_pane_append(buf, len, b, n);
 		}
+		if (show_time) {
+			n = snprintf(b, sizeof b, "%llu ",
+			    (unsigned long long)grid_line_time(gl));
+			if (n >= 0)
+				buf = cmd_capture_pane_append(buf, len, b, n);
+		}
 		if (show_flags) {
 			cp = b;
 			*cp = '\0';
 
-			gl = grid_peek_line(gd, i);
 			if (gl->flags & GRID_LINE_DEAD)
 				*cp++ = 'D';
 			if (gl->flags & GRID_LINE_HYPERLINK)
@@ -393,7 +400,6 @@ cmd_capture_pane_history(struct args *args, struct cmdq_item *item,
 		}
 		buf = cmd_capture_pane_append(buf, len, line, linelen);
 
-		gl = grid_peek_line(gd, i);
 		if (!join_lines || !(gl->flags & GRID_LINE_WRAPPED))
 			buf[(*len)++] = '\n';
 

cmd-display-menu.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: cmd-display-menu.c,v 1.53 2026/08/31 07:46:55 nicm Exp $ */
+/* $OpenBSD: cmd-display-menu.c,v 1.55 2026/09/21 12:14:32 nicm Exp $ */
 
 /*
  * Copyright (c) 2019 Nicholas Marriott <nicholas.marriott@gmail.com>
@@ -54,8 +54,8 @@ const struct cmd_entry cmd_display_popup_entry = {
 	.name = "display-popup",
 	.alias = "popup",
 
-	.args = { "Bb:Cc:d:e:Eh:kNs:S:t:T:w:x:y:", 0, -1, NULL },
+	.args = { "Bb:Cc:d:e:Eh:ks:S:t:T:w:x:y:", 0, -1, NULL },
-	.usage = "[-BCEkN] [-b border-lines] [-c target-client] "
+	.usage = "[-BCEk] [-b border-lines] [-c target-client] "
 		 "[-d start-directory] [-e environment] [-h height] "
 		 "[-s style] [-S border-style] " CMD_TARGET_PANE_USAGE
 		 " [-T title] [-w width] [-x position] [-y position] "
@@ -91,203 +91,6 @@ cmd_display_menu_args_parse(struct args *args, u_int idx, __unused char **cause)
 	return (type);
 }
 
-static int
-cmd_display_menu_get_popup_pos(struct client *tc, struct cmdq_item *item,
-    struct args *args, u_int *px, u_int *py, u_int w, u_int h)
-{
-	struct tty		*tty = &tc->tty;
-	struct cmd_find_state	*target = cmdq_get_target(item);
-	struct key_event	*event = cmdq_get_event(item);
-	struct session		*s = tc->session;
-	struct winlink		*wl = target->wl;
-	struct window_pane	*wp = target->wp;
-	struct style_ranges	*ranges = NULL;
-	struct style_range	*sr = NULL;
-	const char		*xp, *yp;
-	char			*p;
-	int			 top;
-	u_int			 line, ox, oy, sx, sy, lines, position;
-	long			 n;
-	struct format_tree	*ft;
-
-	/*
-	 * Work out the position from the -x and -y arguments. This is the
-	 * bottom-left position.
-	 */
-
-	/* If the popup is too big, stop now. */
-	if (w > tty->sx || h > tty->sy)
-		return (0);
-
-	/* Create format with mouse position if any. */
-	ft = format_create_from_target(item);
-	if (event->m.valid) {
-		format_add(ft, "popup_mouse_x", "%u", event->m.x);
-		format_add(ft, "popup_mouse_y", "%u", event->m.y);
-	}
-
-	/* Position of the previous menu, for -x/-y L. */
-	format_add(ft, "popup_last_x", "%u", target->w->menu_last_px);
-	format_add(ft, "popup_last_y", "%u", target->w->menu_last_py + h);
-
-	/*
-	 * If there are any status lines, add this window position and the
-	 * status line position.
-	 */
-	top = status_at_line(tc);
-	if (top != -1) {
-		lines = status_line_size(tc);
-		if (top == 0)
-			top = lines;
-		else
-			top = 0;
-		position = options_get_number(s->options, "status-position");
-
-		for (line = 0; line < lines; line++) {
-			ranges = &tc->status.entries[line].ranges;
-			TAILQ_FOREACH(sr, ranges, entry) {
-				if (sr->type != STYLE_RANGE_WINDOW)
-					continue;
-				if (sr->argument == (u_int)wl->idx)
-					break;
-			}
-			if (sr != NULL)
-				break;
-		}
-
-		if (sr != NULL) {
-			format_add(ft, "popup_window_status_line_x", "%u",
-			    sr->start);
-			if (position == 0) {
-				format_add(ft, "popup_window_status_line_y",
-				    "%u", line + 1 + h);
-			} else {
-				format_add(ft, "popup_window_status_line_y",
-				    "%u", tty->sy - lines + line);
-			}
-		}
-
-		if (position == 0)
-			format_add(ft, "popup_status_line_y", "%u", lines + h);
-		else {
-			format_add(ft, "popup_status_line_y", "%u",
-			    tty->sy - lines);
-		}
-	} else
-		top = 0;
-
-	/* Popup width and height. */
-	format_add(ft, "popup_width", "%u", w);
-	format_add(ft, "popup_height", "%u", h);
-
-	/* Position so popup is in the centre. */
-	n = (long)(tty->sx - 1) / 2 - w / 2;
-	if (n < 0)
-		format_add(ft, "popup_centre_x", "%u", 0);
-	else
-		format_add(ft, "popup_centre_x", "%ld", n);
-	n = (tty->sy - 1) / 2 + h / 2;
-	if (n >= tty->sy)
-		format_add(ft, "popup_centre_y", "%u", tty->sy - h);
-	else
-		format_add(ft, "popup_centre_y", "%ld", n);
-
-	/* Position of popup relative to mouse. */
-	if (event->m.valid) {
-		n = (long)event->m.x - w / 2;
-		if (n < 0)
-			format_add(ft, "popup_mouse_centre_x", "%u", 0);
-		else
-			format_add(ft, "popup_mouse_centre_x", "%ld", n);
-		n = event->m.y - h / 2;
-		if (n + h >= tty->sy) {
-			format_add(ft, "popup_mouse_centre_y", "%u",
-			    tty->sy - h);
-		} else
-			format_add(ft, "popup_mouse_centre_y", "%ld", n);
-		n = (long)event->m.y + h;
-		if (n >= tty->sy)
-			format_add(ft, "popup_mouse_top", "%u", tty->sy - 1);
-		else
-			format_add(ft, "popup_mouse_top", "%ld", n);
-		n = event->m.y - h;
-		if (n < 0)
-			format_add(ft, "popup_mouse_bottom", "%u", 0);
-		else
-			format_add(ft, "popup_mouse_bottom", "%ld", n);
-	}
-
-	/* Position in pane. */
-	tty_window_offset(&tc->tty, &ox, &oy, &sx, &sy);
-	n = top + wp->yoff - oy + h;
-	if (n >= tty->sy)
-		format_add(ft, "popup_pane_top", "%u", tty->sy - h);
-	else
-		format_add(ft, "popup_pane_top", "%ld", n);
-	format_add(ft, "popup_pane_bottom", "%u", top + wp->yoff + wp->sy - oy);
-	format_add(ft, "popup_pane_left", "%u", wp->xoff - ox);
-	n = (long)wp->xoff + wp->sx - ox - w;
-	if (n < 0)
-		format_add(ft, "popup_pane_right", "%u", 0);
-	else
-		format_add(ft, "popup_pane_right", "%ld", n);
-
-	/* Expand horizontal position. */
-	xp = args_get(args, 'x');
-	if (xp == NULL || strcmp(xp, "C") == 0)
-		xp = "#{popup_centre_x}";
-	else if (strcmp(xp, "R") == 0)
-		xp = "#{popup_pane_right}";
-	else if (strcmp(xp, "P") == 0)
-		xp = "#{popup_pane_left}";
-	else if (strcmp(xp, "M") == 0)
-		xp = "#{popup_mouse_centre_x}";
-	else if (strcmp(xp, "L") == 0)
-		xp = "#{popup_last_x}";
-	else if (strcmp(xp, "W") == 0)
-		xp = "#{popup_window_status_line_x}";
-	p = format_expand(ft, xp);
-	n = strtol(p, NULL, 10);
-	if (n + w >= tty->sx)
-		n = tty->sx - w;
-	else if (n < 0)
-		n = 0;
-	*px = n;
-	log_debug("%s: -x: %s = %s = %u (-w %u)", __func__, xp, p, *px, w);
-	free(p);
-
-	/* Expand vertical position  */
-	yp = args_get(args, 'y');
-	if (yp == NULL || strcmp(yp, "C") == 0)
-		yp = "#{popup_centre_y}";
-	else if (strcmp(yp, "P") == 0)
-		yp = "#{popup_pane_bottom}";
-	else if (strcmp(yp, "M") == 0)
-		yp = "#{popup_mouse_top}";
-	else if (strcmp(yp, "L") == 0)
-		yp = "#{popup_last_y}";
-	else if (strcmp(yp, "S") == 0)
-		yp = "#{popup_status_line_y}";
-	else if (strcmp(yp, "W") == 0)
-		yp = "#{popup_window_status_line_y}";
-	p = format_expand(ft, yp);
-	n = strtol(p, NULL, 10);
-	if (n < h)
-		n = 0;
-	else
-		n -= h;
-	if (n + h >= tty->sy)
-		n = tty->sy - h;
-	else if (n < 0)
-		n = 0;
-	*py = n;
-	log_debug("%s: -y: %s = %s = %u (-h %u)", __func__, yp, p, *py, h);
-	free(p);
-
-	format_free(ft);
-	return (1);
-}
-
 static int
 cmd_display_menu_get_menu_pos(struct client *tc, struct cmdq_item *item,
     struct args *args, u_int *px, u_int *py, u_int w, u_int h)
@@ -482,8 +285,8 @@ cmd_display_menu_exec(struct cmd *self, struct cmdq_item *item)
 	enum box_lines		 lines = BOX_LINES_DEFAULT;
 	char			*title, *cause = NULL;
 	int			 flags = 0, starting_choice = 0;
-	u_int			 px, py, i, count = args_count(args);
+	u_int			 px, py, sx, sy, i, count = args_count(args);
-	struct options		*o = target->s->curw->window->options;
+	struct options		*o = target->w->options;
 	struct options_entry	*oe;
 
 	if (args_has(args, 'C')) {
@@ -531,9 +334,6 @@ cmd_display_menu_exec(struct cmd *self, struct cmdq_item *item)
 	}
 	if (menu->count == 0)
 		goto out;
-	if (!cmd_display_menu_get_menu_pos(tc, item, args, &px, &py,
-	    menu->width + 4, menu->count + 2))
-		goto out;
 
 	value = args_get(args, 'b');
 	if (value != NULL) {
@@ -544,7 +344,11 @@ cmd_display_menu_exec(struct cmd *self, struct cmdq_item *item)
 			cmdq_error(item, "menu-border-lines %s", cause);
 			goto fail;
 		}
-	}
+	} else
+		lines = options_get_number(o, "menu-border-lines");
+	menu_get_size(menu, lines, &sx, &sy);
+	if (!cmd_display_menu_get_menu_pos(tc, item, args, &px, &py, sx, sy))
+		goto out;
 
 	if (args_has(args, 'O'))
 		flags |= MENU_STAYOPEN;
@@ -565,6 +369,22 @@ fail:
 	return (CMD_RETURN_ERROR);
 }
 
+static enum pane_lines
+cmd_display_popup_get_lines(const char *value, char **cause)
+{
+	const struct options_table_entry	*oe;
+
+	if (value == NULL)
+		value = "single";
+	else if (strcmp(value, "rounded") == 0)
+		value = "single";
+	else if (strcmp(value, "padded") == 0)
+		value = "spaces";
+
+	oe = options_search("pane-border-lines");
+	return (options_find_choice(oe, value, cause));
+}
+
 static enum cmd_retval
 cmd_display_popup_exec(struct cmd *self, struct cmdq_item *item)
 {
@@ -572,148 +392,199 @@ cmd_display_popup_exec(struct cmd *self, struct cmdq_item *item)
 	struct cmd_find_state	*target = cmdq_get_target(item);
 	struct session		*s = target->s;
 	struct client		*tc = cmdq_get_target_client(item);
-	struct tty		*tty = &tc->tty;
+	struct winlink		*wl = target->wl;
-	const char		*value, *shell, *shellcmd = NULL;
+	struct window		*w = wl->window;
-	const char		*style = args_get(args, 's');
+	struct window_pane	*wp = target->wp, *new_wp = NULL;
+	struct spawn_context	 sc = { 0 };
+	struct layout_cell	*lc = NULL;
+	struct layout_geometry	 lg;
+	struct event_payload	*ep;
+	struct cmd_find_state	 fs;
+	const char		*value, *style = args_get(args, 's');
 	const char		*border_style = args_get(args, 'S');
-	char			*cwd = NULL, *cause = NULL, **argv = NULL;
+	char			*cause = NULL, *title = NULL;
-	char			*title = NULL;
+	enum pane_lines		 lines = PANE_LINES_SINGLE;
-	int			 modify = popup_present(tc);
+	u_int			 px, py, sx, sy, count = args_count(args);
-	int			 flags = -1, argc = 0;
-	enum box_lines		 lines = BOX_LINES_DEFAULT;
-	u_int			 px, py, w, h, count = args_count(args);
 	struct args_value	*av;
-	struct environ		*env = NULL;
+	long long		 ll;
-	struct options		*o = s->curw->window->options;
-	struct options_entry	*oe;
 
 	if (args_has(args, 'C')) {
-		server_client_clear_overlay(tc);
+		if (w->modal != NULL)
+			server_kill_pane(w->modal);
 		return (CMD_RETURN_NORMAL);
 	}
 	if (tc->flags & CLIENT_CONTROL)
 		return (CMD_RETURN_NORMAL);
-	if (!modify && tc->overlay_draw != NULL)
+	if (w->modal != NULL)
 		return (CMD_RETURN_NORMAL);
 
-	if (!modify) {
-		h = tty->sy / 2;
-		if (args_has(args, 'h')) {
-			h = args_percentage(args, 'h', 1, tty->sy, tty->sy,
-			    &cause);
-			if (cause != NULL) {
-				cmdq_error(item, "height %s", cause);
-				goto fail;
-			}
-		}
-
-		w = tty->sx / 2;
-		if (args_has(args, 'w')) {
-			w = args_percentage(args, 'w', 1, tty->sx, tty->sx,
-			    &cause);
-			if (cause != NULL) {
-				cmdq_error(item, "width %s", cause);
-				goto fail;
-			}
-		}
-
-		if (w > tty->sx)
-			w = tty->sx;
-		if (h > tty->sy)
-			h = tty->sy;
-		if (!cmd_display_menu_get_popup_pos(tc, item, args, &px, &py,
-		    w, h))
-			goto out;
-
-		value = args_get(args, 'd');
-		if (value != NULL)
-			cwd = format_single_from_target(item, value);
-		else
-			cwd = xstrdup(server_client_get_cwd(tc, s));
-		if (count == 0) {
-			shellcmd = options_get_string(s->options,
-			    "default-command");
-		} else if (count == 1)
-			shellcmd = args_string(args, 0);
-		if (count <= 1 && (shellcmd == NULL || *shellcmd == '\0')) {
-			shellcmd = NULL;
-			shell = options_get_string(s->options, "default-shell");
-			if (!checkshell(shell))
-				shell = _PATH_BSHELL;
-			cmd_append_argv(&argc, &argv, shell);
-		} else
-			args_to_vector(args, &argc, &argv);
-
-		if (args_has(args, 'e') >= 1) {
-			env = environ_create();
-			av = args_first_value(args, 'e');
-			while (av != NULL) {
-				environ_put(env, av->string, 0);
-				av = args_next_value(av);
-			}
-		}
-	}
-
 	value = args_get(args, 'b');
 	if (args_has(args, 'B'))
-		lines = BOX_LINES_NONE;
+		lines = PANE_LINES_NONE;
 	else if (value != NULL) {
-		oe = options_get(o, "popup-border-lines");
+		lines = cmd_display_popup_get_lines(value, &cause);
-		lines = options_find_choice(options_table_entry(oe), value,
-		    &cause);
 		if (cause != NULL) {
-			cmdq_error(item, "popup-border-lines %s", cause);
+			cmdq_error(item, "pane-border-lines %s", cause);
 			goto fail;
 		}
 	}
 
+	sy = w->sy / 2;
+	if (args_has(args, 'h')) {
+		ll = args_percentage(args, 'h', 1, w->sy, w->sy, &cause);
+		if (cause != NULL) {
+			cmdq_error(item, "height %s", cause);
+			goto fail;
+		}
+		sy = ll;
+	}
+
+	sx = w->sx / 2;
+	if (args_has(args, 'w')) {
+		ll = args_percentage(args, 'w', 1, w->sx, w->sx, &cause);
+		if (cause != NULL) {
+			cmdq_error(item, "width %s", cause);
+			goto fail;
+		}
+		sx = ll;
+	}
+
+	if (sx > w->sx)
+		sx = w->sx;
+	if (sy > w->sy)
+		sy = w->sy;
+	if ((lines == PANE_LINES_NONE && (sx < 1 || sy < 1)) ||
+	    (lines != PANE_LINES_NONE && (sx < 3 || sy < 3)))
+		goto out;
+	if (!cmd_display_menu_get_menu_pos(tc, item, args, &px, &py, sx, sy))
+		goto out;
+
+	lg.sx = sx;
+	lg.sy = sy;
+	lg.xoff = px;
+	lg.yoff = py;
+	if (lines != PANE_LINES_NONE) {
+		lg.sx -= 2;
+		lg.sy -= 2;
+		lg.xoff++;
+		lg.yoff++;
+	}
+
+	window_push_zoom(w, 0, 1);
+	lc = layout_floating_pane(w, wp, &lg);
+	if (lc == NULL) {
+		window_pop_zoom(w);
+		goto out;
+	}
+
+	sc.item = item;
+	sc.s = s;
+	sc.wl = wl;
+	sc.tc = tc;
+	sc.wp0 = wp;
+	sc.lc = lc;
+	sc.idx = -1;
+	sc.cwd = args_get(args, 'd');
+	sc.flags = (SPAWN_FLOATING|SPAWN_MODAL|SPAWN_FLOATOVERZOOM);
+
+	if (count != 1 || *args_string(args, 0) != '\0')
+		args_to_vector(args, &sc.argc, &sc.argv);
+	sc.environ = environ_create();
+	av = args_first_value(args, 'e');
+	while (av != NULL) {
+		environ_put(sc.environ, av->string, 0);
+		av = args_next_value(av);
+	}
+
+	new_wp = spawn_pane(&sc, &cause);
+	if (new_wp == NULL) {
+		cmdq_error(item, "create pane failed: %s", cause);
+		free(cause);
+		cause = NULL;
+		window_pop_zoom(w);
+		goto fail;
+	}
+	window_pop_zoom(w);
+	new_wp->flags |= PANE_CAPTUREALLKEYS;
+	if (!args_has(args, 'E'))
+		new_wp->flags |= PANE_CLOSEONCANCEL;
+
+	options_set_number(new_wp->options, "pane-border-lines", lines);
+	if (args_has(args, 'E') > 1) {
+		if (args_has(args, 'k'))
+			options_set_number(new_wp->options, "remain-on-exit", 4);
+		else
+			options_set_number(new_wp->options, "remain-on-exit", 2);
+	} else if (args_has(args, 'E'))
+		options_set_number(new_wp->options, "remain-on-exit", 0);
+	else if (args_has(args, 'k'))
+		options_set_number(new_wp->options, "remain-on-exit", 3);
+	else
+		options_set_number(new_wp->options, "remain-on-exit", 1);
+	options_set_string(new_wp->options, "remain-on-exit-format", 0, "%s", "");
+
+	if (style != NULL) {
+		if (options_set_string(new_wp->options, "window-style", 0,
+		    "%s", style) == NULL) {
+			cmdq_error(item, "bad style: %s", style);
+			goto fail;
+		}
+		options_set_string(new_wp->options, "window-active-style", 0,
+		    "%s", style);
+		new_wp->flags |= (PANE_REDRAW|PANE_STYLECHANGED|
+		    PANE_THEMECHANGED);
+	}
+	if (border_style != NULL) {
+		if (options_set_string(new_wp->options, "pane-border-style", 0,
+		    "%s", border_style) == NULL) {
+			cmdq_error(item, "bad border style: %s", border_style);
+			goto fail;
+		}
+		options_set_string(new_wp->options, "pane-active-border-style",
+		    0, "%s", border_style);
+	}
 	if (args_has(args, 'T'))
 		title = format_single_from_target(item, args_get(args, 'T'));
-	else
+	if (title != NULL) {
-		title = xstrdup("");
+		options_set_number(new_wp->options, "pane-border-status",
-
+		    PANE_STATUS_TOP);
-	if (args_has(args, 'N') || !modify)
+		options_set_string(new_wp->options, "pane-border-format", 0,
-		flags = 0;
+		    "%s", "#{pane_title}");
-	if (args_has(args, 'E') > 1) {
+		screen_set_title(&new_wp->base, title, 0);
-		if (flags == -1)
+		ep = event_payload_create();
-			flags = 0;
+		cmd_find_from_pane(&fs, new_wp, 0);
-		flags |= POPUP_CLOSEEXITZERO;
+		event_payload_set_target(ep, &fs);
-	} else if (args_has(args, 'E')) {
+		event_payload_set_pane(ep, "pane", new_wp);
-		if (flags == -1)
+		event_payload_set_window(ep, "window", new_wp->window);
-			flags = 0;
+		event_payload_set_string(ep, "new_title", "%s", title);
-		flags |= POPUP_CLOSEEXIT;
+		events_fire("pane-title-changed", ep);
-	}
-	if (args_has(args, 'k')) {
-		if (flags == -1)
-			flags = 0;
-		flags |= POPUP_CLOSEANYKEY;
 	}
 
-	if (modify) {
+	new_wp->wait_item = item;
-		popup_modify(tc, title, style, border_style, lines, flags);
+	server_redraw_session(s);
-		goto out;
+	if (sc.argv != NULL)
-	}
+		cmd_free_argv(sc.argc, sc.argv);
-	if (popup_display(flags, lines, item, px, py, w, h, env, shellcmd, argc,
+	environ_free(sc.environ);
-	    argv, cwd, title, tc, s, style, border_style, NULL, NULL) != 0)
-		goto out;
-	environ_free(env);
-	free(cwd);
 	free(title);
-	cmd_free_argv(argc, argv);
 	return (CMD_RETURN_WAIT);
 
 out:
-	cmd_free_argv(argc, argv);
+	if (sc.argv != NULL)
-	environ_free(env);
+		cmd_free_argv(sc.argc, sc.argv);
-	free(cwd);
+	environ_free(sc.environ);
 	free(title);
 	return (CMD_RETURN_NORMAL);
 
 fail:
 	free(cause);
-	cmd_free_argv(argc, argv);
+	if (new_wp != NULL) {
-	environ_free(env);
+		server_client_remove_pane(new_wp);
-	free(cwd);
+		layout_close_pane(new_wp);
+		window_remove_pane(new_wp->window, new_wp);
+	}
+	if (sc.argv != NULL)
+		cmd_free_argv(sc.argc, sc.argv);
+	environ_free(sc.environ);
 	free(title);
 	return (CMD_RETURN_ERROR);
 }

cmd-display-message.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: cmd-display-message.c,v 1.65 2026/02/23 08:46:57 nicm Exp $ */
+/* $OpenBSD: cmd-display-message.c,v 1.66 2026/09/08 08:33:10 nicm Exp $ */
 
 /*
  * Copyright (c) 2009 Tiago Cunha <me@tiagocunha.org>
@@ -39,8 +39,8 @@ const struct cmd_entry cmd_display_message_entry = {
 	.name = "display-message",
 	.alias = "display",
 
-	.args = { "aCc:d:lINpt:F:v", 0, 1, NULL },
+	.args = { "aCc:d:jlINpt:F:v", 0, 1, NULL },
-	.usage = "[-aCIlNpv] [-c target-client] [-d delay] [-F format] "
+	.usage = "[-aCIjlNpv] [-c target-client] [-d delay] [-F format] "
 		 CMD_TARGET_PANE_USAGE " [message]",
 
 	.target = { 't', CMD_FIND_PANE, CMD_FIND_CANFAIL },
@@ -67,14 +67,15 @@ cmd_display_message_exec(struct cmd *self, struct cmdq_item *item)
 	struct winlink		*wl = target->wl;
 	struct window_pane	*wp = target->wp;
 	const char		*template;
-	char			*msg, *cause;
+	char			*msg, *cause = NULL;
 	int			 delay = -1, flags, Nflag = args_has(args, 'N');
 	int			 Cflag = args_has(args, 'C');
 	struct format_tree	*ft;
 	u_int			 count = args_count(args);
 	struct evbuffer		*evb;
+	struct json_node	*jn;
 
-	if (args_has(args, 'I')) {
+	if (args_has(args, 'I') && !args_has(args, 'j')) {
 		if (wp == NULL)
 			return (CMD_RETURN_NORMAL);
 		switch (window_pane_start_input(wp, item, &cause)) {
@@ -107,7 +108,9 @@ cmd_display_message_exec(struct cmd *self, struct cmdq_item *item)
 		template = args_string(args, 0);
 	else
 		template = args_get(args, 'F');
-	if (template == NULL)
+	if (args_has(args, 'j') && template == NULL)
+		template = "";
+	else if (template == NULL)
 		template = DISPLAY_MESSAGE_TEMPLATE;
 
 	/*
@@ -129,7 +132,7 @@ cmd_display_message_exec(struct cmd *self, struct cmdq_item *item)
 	ft = format_create(cmdq_get_client(item), item, FORMAT_NONE, flags);
 	format_defaults(ft, c, s, wl, wp);
 
-	if (args_has(args, 'a')) {
+	if (args_has(args, 'a') && !args_has(args, 'j')) {
 		format_each(ft, cmd_display_message_each, item);
 		format_free(ft);
 		return (CMD_RETURN_NORMAL);
@@ -139,6 +142,19 @@ cmd_display_message_exec(struct cmd *self, struct cmdq_item *item)
 		msg = xstrdup(template);
 	else
 		msg = format_expand_time(ft, template);
+	if (args_has(args, 'j')) {
+		jn = json_parse(msg, &cause);
+		if (jn == NULL) {
+			cmdq_error(item, "%s", cause);
+			free(cause);
+			free(msg);
+			format_free(ft);
+			return (CMD_RETURN_ERROR);
+		}
+		free(msg);
+		msg = json_to_string(jn);
+		json_destroy_node(jn);
+	}
 
 	if (cmdq_get_client(item) == NULL)
 		cmdq_error(item, "%s", msg);

cmd-find.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: cmd-find.c,v 1.87 2026/07/17 12:42:51 nicm Exp $ */
+/* $OpenBSD: cmd-find.c,v 1.88 2026/09/07 12:05:12 nicm Exp $ */
 
 /*
  * Copyright (c) 2015 Nicholas Marriott <nicholas.marriott@gmail.com>
@@ -388,9 +388,11 @@ cmd_find_get_window_with_session(struct cmd_find_state *fs, const char *window)
 
 	/* Try as an offset. */
 	if (!exact && (window[0] == '+' || window[0] == '-')) {
-		if (window[1] != '\0')
+		if (window[1] != '\0') {
-			n = strtonum(window + 1, 1, INT_MAX, NULL);
+			n = strtonum(window + 1, 1, INT_MAX, &errstr);
-		else
+			if (errstr != NULL)
+				return (-1);
+		} else
 			n = 1;
 		s = fs->s;
 		if (fs->flags & CMD_FIND_WINDOW_INDEX) {
@@ -626,9 +628,11 @@ cmd_find_get_pane_with_window(struct cmd_find_state *fs, const char *pane)
 
 	/* Try as an offset. */
 	if (pane[0] == '+' || pane[0] == '-') {
-		if (pane[1] != '\0')
+		if (pane[1] != '\0') {
-			n = strtonum(pane + 1, 1, INT_MAX, NULL);
+			n = strtonum(pane + 1, 1, INT_MAX, &errstr);
-		else
+			if (errstr != NULL)
+				return (-1);
+		} else
 			n = 1;
 		wp = fs->w->active;
 		if (pane[0] == '+')

cmd-join-pane.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: cmd-join-pane.c,v 1.74 2026/08/03 20:29:52 nicm Exp $ */
+/* $OpenBSD: cmd-join-pane.c,v 1.75 2026/09/21 10:33:16 nicm Exp $ */
 
 /*
  * Copyright (c) 2011 George Nachman <tmux@georgester.com>
@@ -133,7 +133,7 @@ cmd_join_pane_place(struct cmdq_item *item, struct winlink *wl,
 	} else if (strcmp(position, "back") == 0) {
 		TAILQ_REMOVE(&w->z_index, wp, zentry);
 		TAILQ_FOREACH(owp, &w->z_index, zentry) {
-			if (!window_pane_is_floating(owp))
+			if (!window_pane_is_floating_with_hidden(owp))
 				break;
 		}
 		if (owp != NULL)
@@ -142,24 +142,30 @@ cmd_join_pane_place(struct cmdq_item *item, struct winlink *wl,
 			TAILQ_INSERT_TAIL(&w->z_index, wp, zentry);
 	} else if (strcmp(position, "forward") == 0) {
 		owp = TAILQ_PREV(wp, window_panes_zindex, zentry);
+		while (owp != NULL && owp->layout_cell == NULL)
+			owp = TAILQ_PREV(owp, window_panes_zindex, zentry);
 		if (owp != NULL) {
 			TAILQ_REMOVE(&w->z_index, wp, zentry);
 			TAILQ_INSERT_BEFORE(owp, wp, zentry);
 		}
 	} else if (strcmp(position, "backward") == 0) {
 		owp = TAILQ_NEXT(wp, zentry);
+		while (owp != NULL && owp->layout_cell == NULL)
+			owp = TAILQ_NEXT(owp, zentry);
 		if (owp != NULL && window_pane_is_floating(owp)) {
 			TAILQ_REMOVE(&w->z_index, wp, zentry);
 			TAILQ_INSERT_AFTER(&w->z_index, owp, wp, zentry);
 		}
 	} else if (strcmp(position, "forward-loop") == 0) {
 		owp = TAILQ_PREV(wp, window_panes_zindex, zentry);
+		while (owp != NULL && owp->layout_cell == NULL)
+			owp = TAILQ_PREV(owp, window_panes_zindex, zentry);
 		TAILQ_REMOVE(&w->z_index, wp, zentry);
 		if (owp != NULL)
 			TAILQ_INSERT_BEFORE(owp, wp, zentry);
 		else {
 			TAILQ_FOREACH(owp, &w->z_index, zentry) {
-				if (!window_pane_is_floating(owp))
+				if (!window_pane_is_floating_with_hidden(owp))
 					break;
 			}
 			if (owp != NULL)
@@ -169,6 +175,8 @@ cmd_join_pane_place(struct cmdq_item *item, struct winlink *wl,
 		}
 	} else if (strcmp(position, "backward-loop") == 0) {
 		owp = TAILQ_NEXT(wp, zentry);
+		while (owp != NULL && owp->layout_cell == NULL)
+			owp = TAILQ_NEXT(owp, zentry);
 		if (owp != NULL && window_pane_is_floating(owp)) {
 			TAILQ_REMOVE(&w->z_index, wp, zentry);
 			TAILQ_INSERT_AFTER(&w->z_index, owp, wp, zentry);
@@ -299,7 +307,7 @@ cmd_join_pane_mouse_move(struct client *c, struct mouse_event *m)
 	struct window		*w;
 	struct window_pane	*wp;
 	struct layout_cell	*lc;
-	int			 y, ly, x, lx;
+	int			 y, ly, x, lx, oxoff, oyoff, osx, osy;
 
 	wp = cmd_mouse_pane(m, NULL, &wl);
 	if (wp == NULL) {
@@ -321,10 +329,16 @@ cmd_join_pane_mouse_move(struct client *c, struct mouse_event *m)
 		ly = m->statusat - 1;
 
 	if (x != lx || y != ly) {
+		oxoff = wp->xoff;
+		oyoff = wp->yoff;
+		osx = wp->sx;
+		osy = wp->sy;
+
 		lc->g.xoff += x - lx;
 		lc->g.yoff += y - ly;
 		layout_fix_panes(w, NULL);
-		server_redraw_window(w);
+
+		window_redraw_floating_pane(wp, oxoff, oyoff, osx, osy);
 		server_redraw_window_borders(w);
 	}
 }
@@ -347,8 +361,10 @@ cmd_join_pane_zindex(struct cmdq_item *item, struct winlink *wl,
 
 	n = 0;
 	TAILQ_FOREACH(owp, &w->z_index, zentry) {
-		if (!window_pane_is_floating(owp))
+		if (!window_pane_is_floating_with_hidden(owp))
 			break;
+		if (owp->layout_cell == NULL)
+			continue;
 		if (n >= z)
 			break;
 		n++;
@@ -443,7 +459,6 @@ cmd_join_pane_exec(struct cmd *self, struct cmdq_item *item)
 				cmdq_error(item, "pane is not floating");
 				return (CMD_RETURN_ERROR);
 			}
-			server_unzoom_window(dst_w);
 			if ((s = args_get(args, 'P')) != NULL)
 				return (cmd_join_pane_place(item, dst_wl, dst_wp, s));
 			if ((s = args_get(args, 'z')) != NULL)

cmd-list-panes.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: cmd-list-panes.c,v 1.40 2026/06/01 14:01:09 nicm Exp $ */
+/* $OpenBSD: cmd-list-panes.c,v 1.41 2026/09/08 10:20:08 nicm Exp $ */
 
 /*
  * Copyright (c) 2009 Nicholas Marriott <nicholas.marriott@gmail.com>
@@ -97,6 +97,7 @@ cmd_list_panes_window(struct cmd *self, struct session *s, struct winlink *wl,
     struct cmdq_item *item, int type)
 {
 	struct args		*args = cmd_get_args(self);
+	struct client		*c = cmdq_get_client(item);
 	struct window_pane	*wp, **l;
 	u_int			 i, n;
 	struct format_tree	*ft;
@@ -147,7 +148,7 @@ cmd_list_panes_window(struct cmd *self, struct session *s, struct winlink *wl,
 		wp = l[i];
 		ft = format_create(cmdq_get_client(item), item, FORMAT_NONE, 0);
 		format_add(ft, "line", "%u", n);
-		format_defaults(ft, NULL, s, wl, wp);
+		format_defaults(ft, c, s, wl, wp);
 
 		if (filter != NULL) {
 			expanded = format_expand(ft, filter);

cmd-list-sessions.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: cmd-list-sessions.c,v 1.36 2026/02/27 08:25:12 nicm Exp $ */
+/* $OpenBSD: cmd-list-sessions.c,v 1.37 2026/09/08 10:20:08 nicm Exp $ */
 
 /*
  * Copyright (c) 2007 Nicholas Marriott <nicholas.marriott@gmail.com>
@@ -53,6 +53,7 @@ static enum cmd_retval
 cmd_list_sessions_exec(struct cmd *self, struct cmdq_item *item)
 {
 	struct args		 *args = cmd_get_args(self);
+	struct client		 *c = cmdq_get_client(item);
 	struct session		**l;
 	u_int		 	  n, i;
 	struct format_tree	 *ft;
@@ -76,7 +77,7 @@ cmd_list_sessions_exec(struct cmd *self, struct cmdq_item *item)
 	for (i = 0; i < n; i++) {
 		ft = format_create(cmdq_get_client(item), item, FORMAT_NONE, 0);
 		format_add(ft, "line", "%u", i);
-		format_defaults(ft, NULL, l[i], NULL, NULL);
+		format_defaults(ft, c, l[i], NULL, NULL);
 
 		if (filter != NULL) {
 			expanded = format_expand(ft, filter);

cmd-list-windows.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: cmd-list-windows.c,v 1.50 2026/02/27 08:25:12 nicm Exp $ */
+/* $OpenBSD: cmd-list-windows.c,v 1.51 2026/09/08 10:20:08 nicm Exp $ */
 
 /*
  * Copyright (c) 2007 Nicholas Marriott <nicholas.marriott@gmail.com>
@@ -60,6 +60,7 @@ cmd_list_windows_exec(struct cmd *self, struct cmdq_item *item)
 {
 	struct args		*args = cmd_get_args(self);
 	struct cmd_find_state	*target = cmdq_get_target(item);
+	struct client		*c = cmdq_get_client(item);
 	struct winlink		*wl, **l;
 	struct session		*s;
 	u_int			 i, n;
@@ -94,7 +95,7 @@ cmd_list_windows_exec(struct cmd *self, struct cmdq_item *item)
 		s = wl->session;
 		ft = format_create(cmdq_get_client(item), item, FORMAT_NONE, 0);
 		format_add(ft, "line", "%u", n);
-		format_defaults(ft, NULL, s, wl, NULL);
+		format_defaults(ft, c, s, wl, NULL);
 
 		if (filter != NULL) {
 			expanded = format_expand(ft, filter);

cmd-new-window.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: cmd-new-window.c,v 1.103 2026/07/08 08:07:42 nicm Exp $ */
+/* $OpenBSD: cmd-new-window.c,v 1.104 2026/09/03 21:04:11 nicm Exp $ */
 
 /*
  * Copyright (c) 2007 Nicholas Marriott <nicholas.marriott@gmail.com>
@@ -60,7 +60,8 @@ cmd_new_window_exec(struct cmd *self, struct cmdq_item *item)
 	struct client		*tc = cmdq_get_target_client(item);
 	struct session		*s = target->s;
 	struct winlink		*wl = target->wl, *new_wl = NULL;
-	int			 idx = target->idx, before, count = args_count(args);
+	int			 idx = target->idx, before;
+	int			 count = args_count(args);
 	char			*cause = NULL, *cp, *expanded, *wname = NULL;
 	const char		*template, *name;
 	struct cmd_find_state	 fs;
@@ -74,8 +75,10 @@ cmd_new_window_exec(struct cmd *self, struct cmdq_item *item)
 	}
 
 	/*
-	 * If -S and -n are given and -t is not and a single window with this
+	 * If -S is given, select an existing window instead of creating a
-	 * name already exists, select it.
+	 * new one: preferring -t if it already points at a window, or
+	 * otherwise -n if one exists with that name. If neither matches,
+	 * fall through and create a window as normal.
 	 */
 	name = args_get(args, 'n');
 	if (name != NULL) {
@@ -88,32 +91,39 @@ cmd_new_window_exec(struct cmd *self, struct cmdq_item *item)
 		wname = clean_name(expanded, 0);
 		free(expanded);
 	}
-	if (args_has(args, 'S') && wname != NULL && target->idx == -1) {
+	if (args_has(args, 'S')) {
-		expanded = format_single(item, wname, c, s, NULL, NULL);
+		if (idx != -1)
-		RB_FOREACH(wl, winlinks, &s->windows) {
+			new_wl = winlink_find_by_index(&s->windows, idx);
-			if (strcmp(wl->window->name, expanded) != 0)
+		else if (wname != NULL) {
-				continue;
+			expanded = format_single(item, wname, c, s, NULL, NULL);
-			if (new_wl == NULL) {
+			RB_FOREACH(wl, winlinks, &s->windows) {
-				new_wl = wl;
+				if (strcmp(wl->window->name, expanded) != 0)
-				continue;
+					continue;
+				if (new_wl == NULL) {
+					new_wl = wl;
+					continue;
+				}
+				cmdq_error(item, "multiple windows named %s",
+				    wname);
+				free(wname);
+				free(expanded);
+				return (CMD_RETURN_ERROR);
 			}
-			cmdq_error(item, "multiple windows named %s", wname);
-			free(wname);
 			free(expanded);
-			return (CMD_RETURN_ERROR);
 		}
-		free(expanded);
+	}
-		if (new_wl != NULL) {
+
-			free(wname);
+	/* Found an existing window to select instead of creating a new one. */
-			if (args_has(args, 'd'))
+	if (new_wl != NULL) {
-				return (CMD_RETURN_NORMAL);
+		free(wname);
-			if (session_set_current(s, new_wl) == 0)
+		if (args_has(args, 'd'))
-				server_redraw_session(s);
-			if (c != NULL && c->session != NULL)
-				s->curw->window->latest = c;
-			recalculate_sizes();
 			return (CMD_RETURN_NORMAL);
-		}
+		if (session_set_current(s, new_wl) == 0)
+			server_redraw_session(s);
+		if (c != NULL && c->session != NULL)
+			s->curw->window->latest = c;
+		recalculate_sizes();
+		return (CMD_RETURN_NORMAL);
 	}
 
 	before = args_has(args, 'b');

cmd-parse.y

@@ -1,4 +1,4 @@
-/* $OpenBSD: cmd-parse.y,v 1.59 2026/08/31 07:51:56 nicm Exp $ */
+/* $OpenBSD: cmd-parse.y,v 1.60 2026/09/08 10:20:08 nicm Exp $ */
 
 /*
  * Copyright (c) 2019 Nicholas Marriott <nicholas.marriott@gmail.com>
@@ -210,7 +210,7 @@ expanded	: format
 				cmd_find_from_client(&fs, c, 0);
 				fsp = &fs;
 			}
-			ft = format_create(NULL, pi->item, FORMAT_NONE, flags);
+			ft = format_create(c, pi->item, FORMAT_NONE, flags);
 			format_defaults(ft, c, fsp->s, fsp->wl, fsp->wp);
 
 			$$ = format_expand(ft, $1);

cmd-queue.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: cmd-queue.c,v 1.123 2026/08/24 20:34:26 nicm Exp $ */
+/* $OpenBSD: cmd-queue.c,v 1.124 2026/09/22 06:46:50 nicm Exp $ */
 
 /*
  * Copyright (c) 2013 Nicholas Marriott <nicholas.marriott@gmail.com>
@@ -580,6 +580,9 @@ cmdq_fire_command(struct cmdq_item *item)
 	int			 flags, quiet = 0;
 	char			*tmp;
 
+	if (item->client != NULL && (item->client->flags & CLIENT_DEAD))
+		return (CMD_RETURN_ERROR);
+
 	if (cfg_finished)
 		cmdq_add_message(item);
 	if (log_get_level() > 1) {

cmd-resize-pane.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: cmd-resize-pane.c,v 1.68 2026/08/31 07:44:39 nicm Exp $ */
+/* $OpenBSD: cmd-resize-pane.c,v 1.69 2026/09/21 10:33:16 nicm Exp $ */
 
 /*
  * Copyright (c) 2009 Nicholas Marriott <nicholas.marriott@gmail.com>
@@ -91,7 +91,8 @@ cmd_resize_pane_exec(struct cmd *self, struct cmdq_item *item)
 		server_redraw_window(w);
 		return (CMD_RETURN_NORMAL);
 	}
-	server_unzoom_window(w);
+	if (!window_pane_is_floating(wp))
+		server_unzoom_window(w);
 	lc = wp->layout_cell; /* may have been replaced by unzoom */
 
 	if (args_has(args, 'x')) {
@@ -236,8 +237,8 @@ cmd_resize_pane_mouse_resize_move_floating(struct client *c,
 	struct window_pane	*wp;
 	struct layout_cell	*lc;
 	int			 y, ly, x, lx, sx, sy, new_sx, new_sy;
-	int			 left, right;
+	int			 left, right, resizes = 0;
-	int			 new_xoff, new_yoff, resizes = 0;
+	int			 new_xoff, new_yoff, old_xoff, old_yoff;
 
 	wp = cmd_mouse_pane(m, NULL, &wl);
 	if (wp == NULL) {
@@ -248,6 +249,8 @@ cmd_resize_pane_mouse_resize_move_floating(struct client *c,
 	lc = wp->layout_cell;
 	sx = wp->sx;
 	sy = wp->sy;
+	old_xoff = wp->xoff;
+	old_yoff = wp->yoff;
 	left = wp->xoff - 1;
 	right = wp->xoff + sx;
 	if (window_pane_scrollbar_reserve(wp) &&
@@ -347,7 +350,7 @@ cmd_resize_pane_mouse_resize_move_floating(struct client *c,
 	}
 	if (resizes != 0) {
 		layout_fix_panes(w, NULL);
-		server_redraw_window(w);
+		window_redraw_floating_pane(wp, old_xoff, old_yoff, sx, sy);
 		server_redraw_window_borders(w);
 	}
 }

cmd-run-shell.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: cmd-run-shell.c,v 1.94 2026/08/25 06:04:33 nicm Exp $ */
+/* $OpenBSD: cmd-run-shell.c,v 1.95 2026/09/20 07:59:55 nicm Exp $ */
 
 /*
  * Copyright (c) 2009 Tiago Cunha <me@tiagocunha.org>
@@ -164,7 +164,7 @@ cmd_run_shell_exec(struct cmd *self, struct cmdq_item *item)
 	if (cdata->client != NULL)
 		cdata->client->references++;
 	if (args_has(args, 'c'))
-		cdata->cwd = xstrdup(args_get(args, 'c'));
+		cdata->cwd = format_single_from_target(item, args_get(args, 'c'));
 	else
 		cdata->cwd = xstrdup(server_client_get_cwd(c, s));
 

cmd-select-layout.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: cmd-select-layout.c,v 1.43 2026/07/10 13:38:45 nicm Exp $ */
+/* $OpenBSD: cmd-select-layout.c,v 1.45 2026/09/09 07:03:39 nicm Exp $ */
 
 /*
  * Copyright (c) 2009 Nicholas Marriott <nicholas.marriott@gmail.com>
@@ -73,12 +73,13 @@ cmd_select_layout_exec(struct cmd *self, struct cmdq_item *item)
 {
 	struct args		*args = cmd_get_args(self);
 	struct cmd_find_state	*target = cmdq_get_target(item);
+	struct client		*c = cmdq_get_target_client(item);
 	struct winlink		*wl = target->wl;
 	struct window		*w = wl->window;
 	struct window_pane	*wp = target->wp;
 	const char		*layoutname;
-	char			*oldlayout, *cause;
+	char			*oldlayout, *cause = NULL;
-	int			 next, previous, layout;
+	int			 next, previous, layout, flags = 0;
 
 	server_unzoom_window(w);
 
@@ -89,8 +90,12 @@ cmd_select_layout_exec(struct cmd *self, struct cmdq_item *item)
 	if (args_has(args, 'p'))
 		previous = 1;
 
+	if (c != NULL &&
+	    (c->flags & CLIENT_CONTROL) &&
+	    (~c->flags & CLIENT_CONTROL_NEWLAYOUTS))
+		flags |= LAYOUT_CUSTOM_OLD_FORMAT;
 	oldlayout = w->old_layout;
-	w->old_layout = layout_dump(w, w->layout_root);
+	w->old_layout = layout_dump(w, w->layout_root, flags);
 
 	if (next || previous) {
 		if (next)

cmd-split-window.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: cmd-split-window.c,v 1.150 2026/08/20 09:19:24 nicm Exp $ */
+/* $OpenBSD: cmd-split-window.c,v 1.151 2026/09/10 11:02:18 nicm Exp $ */
 
 /*
  * Copyright (c) 2009 Nicholas Marriott <nicholas.marriott@gmail.com>
@@ -40,8 +40,8 @@ const struct cmd_entry cmd_new_pane_entry = {
 	.name = "new-pane",
 	.alias = "newp",
 
-	.args = { "AbB:Cc:de:EfF:hIkl:KLMm:Op:PR:s:S:t:T:vWx:X:y:Y:Z", 0, -1, NULL },
+	.args = { "AbB:Cc:Dde:EfF:hIkl:KLMm:Op:PR:s:S:t:T:vWx:X:y:Y:Z", 0, -1, NULL },
-	.usage = "[-AbCdefhIkKLMOPvWZ] [-B border-lines] "
+	.usage = "[-AbCDefhIkKLMOPvWZ] [-B border-lines] "
 		 "[-c start-directory] [-e environment] "
 		 "[-F format] [-l size] [-m message] [-p percentage] "
 		 "[-s style] [-S active-border-style] "
@@ -219,6 +219,8 @@ cmd_split_window_exec(struct cmd *self, struct cmdq_item *item)
 		new_wp->flags |= PANE_CAPTUREALLKEYS;
 	if (args_has(args, 'C') && args_has(args, 'O'))
 		new_wp->flags |= PANE_CLOSEONCLICK;
+	if (args_has(args, 'D') && args_has(args, 'O'))
+		new_wp->flags |= PANE_CLOSEONCANCEL;
 
 	style = args_get(args, 's');
 	if (style != NULL) {
@@ -360,6 +362,7 @@ cmd_split_window_mouse_resize(struct client *c, struct mouse_event *m)
 	enum pane_lines		 lines;
 	u_int			 sx, sy;
 	int			 x, y, xoff, yoff, border;
+	int			 oxoff, oyoff, osx, osy;
 
 	if (c->tty.mouse_last_pane == -1)
 		return;
@@ -415,8 +418,14 @@ cmd_split_window_mouse_resize(struct client *c, struct mouse_event *m)
 	if (sy < PANE_MINIMUM)
 		sy = PANE_MINIMUM;
 
+	oxoff = wp->xoff;
+	oyoff = wp->yoff;
+	osx = wp->sx;
+	osy = wp->sy;
+
 	layout_set_size(lc, sx, sy, xoff, yoff);
 	layout_fix_panes(w, NULL);
-	server_redraw_window(w);
+
+	window_redraw_floating_pane(wp, oxoff, oyoff, osx, osy);
 	server_redraw_window_borders(w);
 }

cmd-wait-for.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: cmd-wait-for.c,v 1.23 2026/07/10 13:38:45 nicm Exp $ */
+/* $OpenBSD: cmd-wait-for.c,v 1.24 2026/09/22 06:46:50 nicm Exp $ */
 
 /*
  * Copyright (c) 2013 Nicholas Marriott <nicholas.marriott@gmail.com>
@@ -480,6 +480,40 @@ cmd_wait_for_unlock(struct cmdq_item *item, const char *name,
 	return (CMD_RETURN_NORMAL);
 }
 
+void
+cmd_wait_for_client_lost(struct client *c)
+{
+	struct wait_channel	*wc, *wc1;
+	struct wait_item	*wi, *wi1;
+	struct wait_event_item	*wei, *wei1;
+
+	TAILQ_FOREACH_SAFE(wei, &wait_event_items, entry, wei1) {
+		if (cmdq_get_client(wei->item) == c) {
+			TAILQ_REMOVE(&wait_event_items, wei, entry);
+			cmdq_continue(wei->item);
+			cmd_wait_for_event_free(wei);
+		}
+	}
+
+	RB_FOREACH_SAFE(wc, wait_channels, &wait_channels, wc1) {
+		TAILQ_FOREACH_SAFE(wi, &wc->waiters, entry, wi1) {
+			if (cmdq_get_client(wi->item) == c) {
+				cmdq_continue(wi->item);
+				TAILQ_REMOVE(&wc->waiters, wi, entry);
+				free(wi);
+			}
+		}
+		TAILQ_FOREACH_SAFE(wi, &wc->lockers, entry, wi1) {
+			if (cmdq_get_client(wi->item) == c) {
+				cmdq_continue(wi->item);
+				TAILQ_REMOVE(&wc->lockers, wi, entry);
+				free(wi);
+			}
+		}
+		cmd_wait_for_remove_empty(wc);
+	}
+}
+
 void
 cmd_wait_for_flush(void)
 {

configure.ac

@@ -1,6 +1,6 @@
 # configure.ac
 
-AC_INIT([tmux], next-3.8)
+AC_INIT([tmux], next-3.9)
 AC_PREREQ([2.60])
 
 AC_CONFIG_AUX_DIR(etc)
@@ -111,6 +111,17 @@ case "x$DEFAULT_TERM" in
 	;;
 esac
 
+# Allow the socket directory list to be set. It is a colon-separated list of
+# directories, tried in order; a leading $ is an environment variable.
+AC_ARG_WITH(
+	socket-path,
+	AS_HELP_STRING(--with-socket-path=PATHS, set socket directory list),
+	[TMUX_SOCK=`echo "$withval" | sed 's/[[$]]/$$/g'`],
+	[TMUX_SOCK=]
+)
+AM_CONDITIONAL(HAVE_TMUX_SOCK, [test "x$TMUX_SOCK" != x])
+AC_SUBST(TMUX_SOCK)
+
 # Do we need fuzzers?
 AM_CONDITIONAL(NEED_FUZZING, test "x$enable_fuzzing" = xyes)
 

control-notify.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: control-notify.c,v 1.38 2026/08/03 13:38:42 nicm Exp $ */
+/* $OpenBSD: control-notify.c,v 1.39 2026/09/08 10:20:08 nicm Exp $ */
 
 /*
  * Copyright (c) 2012 Nicholas Marriott <nicholas.marriott@gmail.com>
@@ -70,6 +70,7 @@ control_window_layout_changed_cb(__unused const char *name,
 	struct session		*s;
 	struct winlink		*wl;
 	struct window		*w = event_payload_get_window(ep, "window");
+	struct format_tree	*ft;
 	const char		*template;
 	char			*cp;
 
@@ -84,19 +85,25 @@ control_window_layout_changed_cb(__unused const char *name,
 	 * and we don't need to inform the client about the layout change
 	 * because the whole window will go away soon.
 	 */
-	wl = TAILQ_FIRST(&w->winlinks);
+	if (TAILQ_FIRST(&w->winlinks) == NULL || w->layout_root == NULL)
-	if (wl == NULL || w->layout_root == NULL)
 		return;
-	cp = format_single(NULL, template, NULL, NULL, wl, NULL);
 
 	TAILQ_FOREACH(c, &clients, entry) {
 		if (!CONTROL_SHOULD_NOTIFY_CLIENT(c) || c->session == NULL)
 			continue;
 		s = c->session;
-		if (winlink_find_by_window_id(&s->windows, w->id) != NULL)
+		wl = winlink_find_by_window_id(&s->windows, w->id);
-			control_notify_write(c, "%s", cp);
+		if (wl == NULL)
+			continue;
+
+		ft = format_create(c, NULL, FORMAT_NONE, 0);
+		format_defaults(ft, c, s, wl, NULL);
+		cp = format_expand(ft, template);
+		format_free(ft);
+
+		control_notify_write(c, "%s", cp);
+		free(cp);
 	}
-	free(cp);
 }
 
 /* Notify control clients that window pane changed. */

control.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: control.c,v 1.66 2026/08/18 07:43:44 nicm Exp $ */
+/* $OpenBSD: control.c,v 1.68 2026/09/09 08:30:05 nicm Exp $ */
 
 /*
  * Copyright (c) 2012 Nicholas Marriott <nicholas.marriott@gmail.com>
@@ -108,6 +108,7 @@ struct control_state {
 	u_int				 pending_count;
 
 	TAILQ_HEAD(, control_block)	 all_blocks;
+	size_t				 queued_reply_bytes;
 
 	struct bufferevent		*read_event;
 	struct bufferevent		*write_event;
@@ -132,6 +133,9 @@ struct control_state {
 /* Maximum age for clients that are not using pause mode. */
 #define CONTROL_MAXIMUM_AGE 300000
 
+/* Maximum buffered command replies for a client that is not reading. */
+#define CONTROL_MAXIMUM_REPLY_BUFFER (64 * 1024 * 1024)
+
 /* Flags to ignore client. */
 #define CONTROL_IGNORE_FLAGS \
 	(CLIENT_CONTROL_NOOUTPUT| \
@@ -165,6 +169,15 @@ RB_GENERATE_STATIC(control_windows, control_window, entry, control_window_cmp);
 static void
 control_free_block(struct control_state *cs, struct control_block *cb)
 {
+	size_t	 size;
+
+	if (cb->size == 0 && cb->line != NULL) {
+		size = strlen(cb->line) + 1;
+		if (cs->queued_reply_bytes > size)
+			cs->queued_reply_bytes -= size;
+		else
+			cs->queued_reply_bytes = 0;
+	}
 	free(cb->line);
 	TAILQ_REMOVE(&cs->all_blocks, cb, all_entry);
 	free(cb);
@@ -407,16 +420,52 @@ control_reset_pane(struct client *c, struct window_pane *wp)
 	memcpy(&cp->queued, &wp->offset, sizeof cp->queued);
 }
 
+/*
+ * Check if the replies buffered for a client, including one about to be
+ * added, have grown too large and kill it if so. Returns 1 if further output
+ * for the client should be dropped.
+ */
+static int
+control_check_reply_buffer(struct client *c, size_t added)
+{
+	struct control_state	*cs = c->control_state;
+	size_t			 size;
+
+	if (c->flags & CLIENT_CONTROL_DISCARD)
+		return (1);
+	size = EVBUFFER_LENGTH(cs->write_event->output);
+	size += cs->queued_reply_bytes;
+	size += added;
+	if (size < CONTROL_MAXIMUM_REPLY_BUFFER)
+		return (0);
+
+	log_debug("%s: %s: %zu bytes of replies buffered", __func__, c->name,
+	    size);
+	if (~c->flags & CLIENT_EXIT) {
+		c->exit_message = xstrdup("too far behind");
+		c->flags |= CLIENT_EXIT;
+		control_discard(c);
+	}
+	c->flags |= CLIENT_CONTROL_DISCARD;
+	return (1);
+}
+
 /* Write an already-formatted line, queueing it behind %output if needed. */
 static void
 control_write_line(struct client *c, char *line)
 {
 	struct control_state	*cs = c->control_state;
 	struct control_block	*cb;
+	size_t			 size = strlen(line) + 1;
+
+	if (control_check_reply_buffer(c, size)) {
+		free(line);
+		return;
+	}
 
 	if (TAILQ_EMPTY(&cs->all_blocks)) {
 		log_debug("%s: %s: writing line: %s", __func__, c->name, line);
-		bufferevent_write(cs->write_event, line, strlen(line));
+		bufferevent_write(cs->write_event, line, size - 1);
 		bufferevent_write(cs->write_event, "\n", 1);
 		bufferevent_enable(cs->write_event, EV_WRITE);
 		free(line);
@@ -426,6 +475,7 @@ control_write_line(struct client *c, char *line)
 	cb = xcalloc(1, sizeof *cb);
 	cb->line = line;
 	TAILQ_INSERT_TAIL(&cs->all_blocks, cb, all_entry);
+	cs->queued_reply_bytes += size;
 	cb->t = get_timer();
 
 	log_debug("%s: %s: storing line: %s", __func__, c->name, cb->line);
@@ -455,8 +505,12 @@ control_flush_deferred(struct client *c)
 void
 control_write(struct client *c, const char *fmt, ...)
 {
-	va_list	 ap;
+	struct control_state	*cs = c->control_state;
-	char	*line;
+	char			*line;
+	va_list			 ap;
+
+	if (cs == NULL)
+		return;
 
 	va_start(ap, fmt);
 	xvasprintf(&line, fmt, ap);
@@ -479,6 +533,9 @@ control_write_guard(struct client *c, const char *guard, long t, u_int number,
 	struct control_state	*cs = c->control_state;
 	char			*line;
 
+	if (cs == NULL)
+		return;
+
 	if (strcmp(guard, "begin") == 0)
 		cs->guard_depth++;
 
@@ -503,6 +560,9 @@ control_notify_write(struct client *c, const char *fmt, ...)
 	va_list			 ap;
 	char			*line;
 
+	if (cs == NULL)
+		return;
+
 	va_start(ap, fmt);
 	xvasprintf(&line, fmt, ap);
 	va_end(ap);
@@ -997,6 +1057,7 @@ control_discard_all(struct client *c)
 	control_discard(c);
 	TAILQ_FOREACH_SAFE(cb, &cs->all_blocks, all_entry, cb1)
 		control_free_block(cs, cb);
+	cs->queued_reply_bytes = 0;
 	bufferevent_disable(cs->write_event, EV_WRITE);
 }
 

format.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: format.c,v 1.415 2026/08/31 19:34:09 nicm Exp $ */
+/* $OpenBSD: format.c,v 1.418 2026/09/20 08:19:31 nicm Exp $ */
 
 /*
  * Copyright (c) 2011 Nicholas Marriott <nicholas.marriott@gmail.com>
@@ -855,26 +855,42 @@ format_cb_window_active_clients_list(struct format_tree *ft)
 static void *
 format_cb_window_layout(struct format_tree *ft)
 {
-	struct window	*w = ft->w;
+	struct client		*c = ft->client;
+	struct window		*w = ft->w;
+	struct layout_cell	*lcroot;
+	int			 flags = 0;
 
 	if (w == NULL)
 		return (NULL);
 
 	if (w->saved_layout_root != NULL)
-		return (layout_dump(w, w->saved_layout_root));
+		lcroot = w->saved_layout_root;
-	return (layout_dump(w, w->layout_root));
+	else
+		lcroot = w->layout_root;
+
+	if (c != NULL &&
+	    (c->flags & CLIENT_CONTROL) &&
+	    (~c->flags & CLIENT_CONTROL_NEWLAYOUTS))
+		flags |= LAYOUT_CUSTOM_OLD_FORMAT;
+	return (layout_dump(w, lcroot, flags));
 }
 
 /* Callback for window_visible_layout. */
 static void *
 format_cb_window_visible_layout(struct format_tree *ft)
 {
+	struct client	*c = ft->client;
 	struct window	*w = ft->w;
+	int		 flags = 0;
 
 	if (w == NULL)
 		return (NULL);
 
-	return (layout_dump(w, w->layout_root));
+	if (c != NULL &&
+	    (c->flags & CLIENT_CONTROL) &&
+	    (~c->flags & CLIENT_CONTROL_NEWLAYOUTS))
+		flags |= LAYOUT_CUSTOM_OLD_FORMAT;
+	return (layout_dump(w, w->layout_root, flags));
 }
 
 /* Callback for pane_start_command. */
@@ -2860,10 +2876,10 @@ format_cb_session_activity_flag(struct format_tree *ft)
 
 	if (ft->s != NULL) {
 		RB_FOREACH(wl, winlinks, &ft->s->windows) {
-			if (ft->wl->flags & WINLINK_ACTIVITY)
+			if (wl->flags & WINLINK_ACTIVITY)
 				return (xstrdup("1"));
-			return (xstrdup("0"));
 		}
+		return (xstrdup("0"));
 	}
 	return (NULL);
 }
@@ -2878,8 +2894,8 @@ format_cb_session_bell_flag(struct format_tree *ft)
 		RB_FOREACH(wl, winlinks, &ft->s->windows) {
 			if (wl->flags & WINLINK_BELL)
 				return (xstrdup("1"));
-			return (xstrdup("0"));
 		}
+		return (xstrdup("0"));
 	}
 	return (NULL);
 }
@@ -2892,10 +2908,10 @@ format_cb_session_silence_flag(struct format_tree *ft)
 
 	if (ft->s != NULL) {
 		RB_FOREACH(wl, winlinks, &ft->s->windows) {
-			if (ft->wl->flags & WINLINK_SILENCE)
+			if (wl->flags & WINLINK_SILENCE)
 				return (xstrdup("1"));
-			return (xstrdup("0"));
 		}
+		return (xstrdup("0"));
 	}
 	return (NULL);
 }
@@ -5234,6 +5250,7 @@ format_loop_sessions(struct format_expand_state *es, const char *fmt)
 		format_log(es, "session loop: $%u", s->id);
 		if (active != NULL &&
 		    ft->c != NULL &&
+		    ft->c->session != NULL &&
 		    s->id == ft->c->session->id)
 			use = active;
 		else

fuzz/input-fuzzer.c

@@ -44,7 +44,7 @@ LLVMFuzzerTestOneInput(const u_char *data, size_t size)
 	w = window_create(PANE_WIDTH, PANE_HEIGHT, 0, 0);
 	wp = window_add_pane(w, NULL, 0, 0);
 	bufferevent_pair_new(libevent, BEV_OPT_CLOSE_ON_FREE, vpty);
-	wp->ictx = input_init(wp, vpty[0], NULL, NULL);
+	wp->ictx = input_init(wp, vpty[0], NULL);
 	window_add_ref(w, __func__);
 
 	wp->fd = open("/dev/null", O_WRONLY);

fuzz/json-fuzzer.c

@@ -0,0 +1,88 @@
+/*
+ * Fuzz the tmux JSON parser and serializer.
+ */
+
+#include <stdint.h>
+#include <stddef.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include "tmux.h"
+
+struct event_base *libevent;
+
+static void
+walk_json(struct json_node *node)
+{
+	struct json_node	*child, *object;
+	const char		*string;
+	int64_t		 number;
+	int		 boolean;
+
+	if (node == NULL)
+		return;
+
+	(void)json_get_string(node, &string);
+	(void)json_get_number(node, &number);
+	(void)json_get_boolean(node, &boolean);
+
+	if (json_get_object(node, &object) == 0) {
+		(void)json_find(object, "V");
+		(void)json_find(object, "L");
+	}
+
+	for (child = json_array_first(node); child != NULL;
+	    child = json_array_next(child))
+		walk_json(child);
+}
+
+int
+LLVMFuzzerTestOneInput(const uint8_t *data, size_t size)
+{
+	struct json_node	*node;
+	char			*input, *serialized, *cause = NULL;
+
+	if (size == 0 || size > 1U << 20)
+		return 0;
+
+	input = malloc(size + 1);
+	if (input == NULL)
+		return 0;
+	memcpy(input, data, size);
+	input[size] = '\0';
+
+	node = json_parse(input, &cause);
+	free(cause);
+	if (node != NULL) {
+		walk_json(node);
+		serialized = json_to_string(node);
+		free(serialized);
+		json_destroy_node(node);
+	}
+
+	free(input);
+	return 0;
+}
+
+int
+LLVMFuzzerInitialize(__unused int *argc, __unused char ***argv)
+{
+	const struct options_table_entry	*oe;
+
+	global_environ = environ_create();
+	global_options = options_create(NULL);
+	global_s_options = options_create(NULL);
+	global_w_options = options_create(NULL);
+	for (oe = options_table; oe->name != NULL; oe++) {
+		if (oe->scope & OPTIONS_TABLE_SERVER)
+			options_default(global_options, oe);
+		if (oe->scope & OPTIONS_TABLE_SESSION)
+			options_default(global_s_options, oe);
+		if (oe->scope & OPTIONS_TABLE_WINDOW)
+			options_default(global_w_options, oe);
+	}
+	libevent = osdep_event_init();
+	socket_path = xstrdup("dummy");
+
+	return 0;
+}

fuzz/json-fuzzer.dict

@@ -0,0 +1,37 @@
+# JSON structural tokens
+"{"
+"}"
+"["
+"]"
+":"
+","
+"\""
+
+# JSON values
+"true"
+"false"
+"null"
+"0"
+"-1"
+"123456789"
+"\\\""
+"\\\\"
+"\\n"
+"\\u0000"
+
+# tmux layout/control-mode keys
+"V"
+"L"
+"W"
+"H"
+"X"
+"Y"
+"T"
+"S"
+"id"
+"result"
+"error"
+"routes"
+"uri"
+"name"
+"value"

fuzz/json-fuzzer.options

@@ -0,0 +1,2 @@
+[libfuzzer]
+max_len = 4096

fuzz/layout-fuzzer.c

@@ -0,0 +1,111 @@
+/*
+ * Copyright (c) 2026 Arthur Chan <arthur.chan@adalogics.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF MIND, USE, DATA OR PROFITS, WHETHER
+ * IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
+ * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/*
+ * Fuzz the custom layout parser.
+ *
+ * A layout string such as "bb62,80x24,0,0{40x24,0,0,1,39x24,41,0,2}" is
+ * accepted by select-layout and is what tmux stores and restores for a
+ * window, so it is parsed from configuration and from commands. It drives
+ * layout-custom.c (the string parser and the checksum), then layout.c, which
+ * resizes and assigns the cells.
+ *
+ * layout_parse() refuses a window with no panes, and refuses a layout whose
+ * cell count is smaller than the pane count, so the window is given a fixed
+ * number of panes. The count is fixed rather than derived from the input, so
+ * a mutation always means a different layout string.
+ */
+
+#include <sys/types.h>
+
+#include <stddef.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include "tmux.h"
+
+#define FUZZER_MAXLEN 1024
+#define FUZZER_PANES 4
+
+struct event_base	*libevent;
+
+int
+LLVMFuzzerTestOneInput(const u_char *data, size_t size)
+{
+	struct window		*w;
+	struct window_pane	*wp;
+	char			*buf, *cause = NULL, *dump;
+	u_int			 i;
+
+	if (size == 0 || size > FUZZER_MAXLEN)
+		return 0;
+
+	/* layout_parse() takes a C string. */
+	buf = malloc(size + 1);
+	if (buf == NULL)
+		return 0;
+	memcpy(buf, data, size);
+	buf[size] = '\0';
+
+	w = window_create(80, 24, 0, 0);
+	if (w == NULL) {
+		free(buf);
+		return 0;
+	}
+	window_add_ref(w, __func__);
+
+	for (i = 0; i < FUZZER_PANES; i++) {
+		wp = window_add_pane(w, NULL, 0, 0);
+		if (w->active == NULL)
+			w->active = wp;
+	}
+
+	if (layout_parse(w, buf, &cause) == 0) {
+		dump = layout_dump(w, w->layout_root, 1);
+		free(dump);
+	}
+	free(cause);
+
+	window_remove_ref(w, __func__);
+
+	free(buf);
+	return 0;
+}
+
+int
+LLVMFuzzerInitialize(__unused int *argc, __unused char ***argv)
+{
+	const struct options_table_entry	*oe;
+
+	global_environ = environ_create();
+	global_options = options_create(NULL);
+	global_s_options = options_create(NULL);
+	global_w_options = options_create(NULL);
+	for (oe = options_table; oe->name != NULL; oe++) {
+		if (oe->scope & OPTIONS_TABLE_SERVER)
+			options_default(global_options, oe);
+		if (oe->scope & OPTIONS_TABLE_SESSION)
+			options_default(global_s_options, oe);
+		if (oe->scope & OPTIONS_TABLE_WINDOW)
+			options_default(global_w_options, oe);
+	}
+
+	libevent = osdep_event_init();
+
+	socket_path = xstrdup("dummy");
+
+	return 0;
+}

fuzz/layout-fuzzer.dict

@@ -0,0 +1,17 @@
+# tmux custom layout strings: "<checksum>,<sx>x<sy>,<x>,<y>{...}" / "[...]"
+","
+"x"
+"{"
+"}"
+"["
+"]"
+"0"
+"1"
+"80x24,0,0"
+"40x24,0,0"
+"bb62,"
+"cafe,"
+",0,0,0"
+",0,0{"
+",0,0["
+"@"

fuzz/layout-fuzzer.options

@@ -0,0 +1,2 @@
+[libfuzzer]
+max_len = 1024

input.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: input.c,v 1.271 2026/08/31 19:34:09 nicm Exp $ */
+/* $OpenBSD: input.c,v 1.272 2026/09/21 10:22:31 nicm Exp $ */
 
 /*
  * Copyright (c) 2007 Nicholas Marriott <nicholas.marriott@gmail.com>
@@ -101,7 +101,6 @@ struct input_ctx {
 	struct bufferevent	       *event;
 	struct screen_write_ctx		ctx;
 	struct colour_palette	       *palette;
-	struct client		       *c;
 
 	struct input_cell		cell;
 	struct input_cell		old_cell;
@@ -874,7 +873,7 @@ input_restore_state(struct input_ctx *ictx)
 /* Initialise input parser. */
 struct input_ctx *
 input_init(struct window_pane *wp, struct bufferevent *bev,
-    struct colour_palette *palette, struct client *c)
+    struct colour_palette *palette)
 {
 	struct input_ctx	*ictx;
 
@@ -882,7 +881,6 @@ input_init(struct window_pane *wp, struct bufferevent *bev,
 	ictx->wp = wp;
 	ictx->event = bev;
 	ictx->palette = palette;
-	ictx->c = c;
 
 	ictx->input_space = INPUT_BUF_START;
 	ictx->input_buf = xmalloc(INPUT_BUF_START);
@@ -3425,15 +3423,9 @@ input_osc_52(struct input_ctx *ictx, const char *p)
 		return;
 
 	if (wp == NULL) {
-		/* Popup window. */
+		free(out);
-		if (ictx->c == NULL) {
+		return;
-			free(out);
-			return;
-		}
-		tty_set_selection(&ictx->c->tty, clip, out, outlen);
-		paste_add(NULL, out, outlen);
 	} else {
-		/* Normal window. */
 		screen_write_start_pane(&ctx, wp, NULL);
 		screen_write_setselection(&ctx, clip, out, outlen);
 		screen_write_stop(&ctx);

key-bindings.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: key-bindings.c,v 1.192 2026/08/06 09:05:04 nicm Exp $ */
+/* $OpenBSD: key-bindings.c,v 1.193 2026/09/21 20:45:48 nicm Exp $ */
 
 /*
  * Copyright (c) 2007 Nicholas Marriott <nicholas.marriott@gmail.com>
@@ -523,7 +523,7 @@ key_bindings_init(void)
 		"bind -n TripleClick1Pane { select-pane -t=; if -F '#{||:#{pane_in_mode},#{mouse_any_flag}}' { send -M } { copy-mode -H; send -X select-line; run -d0.3; send -X copy-pipe-and-cancel } }",
 
 		/* Mouse button 1 on border. */
-		"bind -n MouseDown1Border { select-pane -M }",
+		"bind -n MouseDown1Border { select-pane -t= }",
 
 		/* Mouse button 1 drag on border. */
 		"bind -n MouseDrag1Border { resize-pane -M }",

layout.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: layout.c,v 1.98 2026/08/25 18:38:05 nicm Exp $ */
+/* $OpenBSD: layout.c,v 1.101 2026/09/20 08:42:46 nicm Exp $ */
 
 /*
  * Copyright (c) 2009 Nicholas Marriott <nicholas.marriott@gmail.com>
@@ -106,7 +106,7 @@ layout_free_cell(struct layout_cell *lc, int only_nodes)
 		}
 		break;
 	case LAYOUT_WINDOWPANE:
-		if (lc->wp != NULL) {
+		if (lc->wp != NULL && lc->wp->layout_cell != NULL) {
 			lc->wp->layout_cell->parent = NULL;
 			lc->wp->layout_cell = NULL;
 		}
@@ -233,29 +233,6 @@ layout_make_node(struct layout_cell *lc, enum layout_type type)
 	lc->wp = NULL;
 }
 
-/* Fix z-indexes. */
-void
-layout_fix_zindexes(struct window *w, struct layout_cell *lc)
-{
-	struct layout_cell	*lcchild;
-
-	if (lc == NULL)
-		return;
-
-	switch (lc->type) {
-	case LAYOUT_WINDOWPANE:
-		TAILQ_INSERT_TAIL(&w->z_index, lc->wp, zentry);
-		break;
-	case LAYOUT_LEFTRIGHT:
-	case LAYOUT_TOPBOTTOM:
-		TAILQ_FOREACH(lcchild, &lc->cells, entry)
-			layout_fix_zindexes(w, lcchild);
-		return;
-	default:
-		fatalx("bad layout type");
-	}
-}
-
 int
 layout_cell_is_tiled(struct layout_cell *lc)
 {
@@ -265,7 +242,7 @@ layout_cell_is_tiled(struct layout_cell *lc)
 	return is_leaf && !is_floating;
 }
 
-static int
+int
 layout_cell_has_tiled_child(struct layout_cell *lc)
 {
 	struct layout_cell      *lcchild;
@@ -492,7 +469,6 @@ layout_fix_panes(struct window *w, struct window_pane *skip)
 					sx = PANE_MINIMUM;
 				else
 					sx = sx - sb_w - sb_pad;
-			wp->flags |= PANE_REDRAWSCROLLBAR;
 		}
 
 		window_pane_resize(wp, sx, sy);
@@ -500,8 +476,11 @@ layout_fix_panes(struct window *w, struct window_pane *skip)
 		if (wp->xoff != old_xoff ||
 		    wp->yoff != old_yoff ||
 		    wp->sx != old_sx ||
-		    wp->sy != old_sy)
+		    wp->sy != old_sy) {
+			if (window_pane_scrollbar_reserve(wp))
+				wp->flags |= PANE_REDRAWSCROLLBAR;
 			changed = 1;
+		}
 	}
 	if (changed)
 		redraw_invalidate_scene(w);
@@ -509,18 +488,20 @@ layout_fix_panes(struct window *w, struct window_pane *skip)
 
 /* Count the number of available cells in a layout. */
 u_int
-layout_count_cells(struct layout_cell *lc)
+layout_count_cells(struct layout_cell *lc, int with_floating)
 {
 	struct layout_cell	*lcchild;
 	u_int			 count = 0;
 
 	switch (lc->type) {
 	case LAYOUT_WINDOWPANE:
+		if (lc->flags & LAYOUT_CELL_FLOATING && !with_floating)
+			return 0;
 		return (1);
 	case LAYOUT_LEFTRIGHT:
 	case LAYOUT_TOPBOTTOM:
 		TAILQ_FOREACH(lcchild, &lc->cells, entry)
-			count += layout_count_cells(lcchild);
+			count += layout_count_cells(lcchild, with_floating);
 		return (count);
 	default:
 		fatalx("bad layout type");
@@ -721,7 +702,7 @@ layout_destroy_cell(struct window *w, struct layout_cell *lc,
 	/* If no parent, this is the last pane in a window. */
 	lcparent = lc->parent;
 	if (lcparent == NULL) {
-		if (lc->wp != NULL)
+		if (*lcroot == lc)
 			*lcroot = NULL;
 		layout_free_cell(lc, 0);
 		return;
@@ -789,6 +770,49 @@ layout_free(struct window *w, int only_nodes)
 	layout_free_cell(w->layout_root, only_nodes);
 }
 
+/* Move and resize floating panes so they stay inside the window. */
+static void
+layout_clamp_floating_panes(struct window *w, u_int sx, u_int sy)
+{
+	struct window_pane	*wp;
+	struct layout_cell	*lc;
+	u_int			 pad, avail, csx, csy;
+
+	TAILQ_FOREACH(wp, &w->z_index, zentry) {
+		lc = wp->layout_cell;
+		if (lc == NULL || (~lc->flags & LAYOUT_CELL_FLOATING))
+			continue;
+		if (window_pane_get_pane_lines(wp) == PANE_LINES_NONE)
+			pad = 0;
+		else
+			pad = 1;
+
+		csx = lc->g.sx;
+		avail = (sx > 2 * pad) ? sx - 2 * pad : 0;
+		if (csx > avail)
+			csx = (avail > PANE_MINIMUM) ? avail : PANE_MINIMUM;
+		csy = lc->g.sy;
+		avail = (sy > 2 * pad) ? sy - 2 * pad : 0;
+		if (csy > avail)
+			csy = (avail > PANE_MINIMUM) ? avail : PANE_MINIMUM;
+		if (csx != lc->g.sx || csy != lc->g.sy)
+			layout_set_size(lc, csx, csy, lc->g.xoff, lc->g.yoff);
+
+		if (lc->g.xoff + lc->g.sx + pad > sx) {
+			if (lc->g.sx + 2 * pad >= sx)
+				lc->g.xoff = pad;
+			else
+				lc->g.xoff = sx - lc->g.sx - pad;
+		}
+		if (lc->g.yoff + lc->g.sy + pad > sy) {
+			if (lc->g.sy + 2 * pad >= sy)
+				lc->g.yoff = pad;
+			else
+				lc->g.yoff = sy - lc->g.sy - pad;
+		}
+	}
+}
+
 /* Resize the entire layout after window resize. */
 void
 layout_resize(struct window *w, u_int sx, u_int sy)
@@ -809,8 +833,11 @@ layout_resize(struct window *w, u_int sx, u_int sy)
 	 * out proportionately - this should leave the layout fitting the new
 	 * window size.
 	 */
-	if (lc->type == LAYOUT_WINDOWPANE && (lc->flags & LAYOUT_CELL_FLOATING))
+	if (lc->type == LAYOUT_WINDOWPANE && (lc->flags & LAYOUT_CELL_FLOATING)) {
+		layout_clamp_floating_panes(w, sx, sy);
+		layout_fix_panes(w, NULL);
 		return;
+	}
 	xchange = sx - lc->g.sx;
 	xlimit = layout_resize_check(w, lc, LAYOUT_LEFTRIGHT);
 	if (xchange < 0 && xchange < -xlimit)
@@ -840,6 +867,7 @@ layout_resize(struct window *w, u_int sx, u_int sy)
 
 	/* Fix cell offsets. */
 	layout_fix_offsets(w);
+	layout_clamp_floating_panes(w, sx, sy);
 	layout_fix_panes(w, NULL);
 }
 
@@ -1702,7 +1730,7 @@ layout_floating_args_parse(struct cmdq_item *item, struct args *args,
     enum pane_lines lines, struct window *w, struct layout_geometry *lg,
     char **cause)
 {
-	int	 sx, sy, ox, oy;
+	int	 sx, sy, ox, oy, pad;
 	char	*error = NULL;
 
 	sx = lg->sx == UINT_MAX ? w->sx / 2 : lg->sx;
@@ -1751,12 +1779,20 @@ layout_floating_args_parse(struct cmdq_item *item, struct args *args,
 		}
 	}
 
+	if (!window_has_floating_panes(w)) {
+		w->last_new_pane_x = 0;
+		w->last_new_pane_y = 0;
+	}
 	if (ox == INT_MAX) {
 		if (w->last_new_pane_x == 0)
 			ox = 4;
 		else {
+			if (lines != PANE_LINES_NONE)
+				pad = 1;
+			else
+				pad = 0;
 			ox = w->last_new_pane_x + 4;
-			if (w->last_new_pane_x > w->sx)
+			if (ox + sx + pad > (int)w->sx)
 				ox = 4;
 		}
 		w->last_new_pane_x = ox;
@@ -1767,8 +1803,12 @@ layout_floating_args_parse(struct cmdq_item *item, struct args *args,
 		if (w->last_new_pane_y == 0)
 			oy = 2;
 		else {
+			if (lines != PANE_LINES_NONE)
+				pad = 1;
+			else
+				pad = 0;
 			oy = w->last_new_pane_y + 2;
-			if (w->last_new_pane_y > w->sy)
+			if (oy + sy + pad > (int)w->sy)
 				oy = 2;
 		}
 		w->last_new_pane_y = oy;

menu.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: menu.c,v 1.70 2026/08/17 07:33:55 nicm Exp $ */
+/* $OpenBSD: menu.c,v 1.71 2026/09/21 12:14:32 nicm Exp $ */
 
 /*
  * Copyright (c) 2019 Nicholas Marriott <nicholas.marriott@gmail.com>
@@ -51,6 +51,18 @@ struct menu_data {
 	void			*data;
 };
 
+void
+menu_get_size(struct menu *menu, enum box_lines lines, u_int *sx, u_int *sy)
+{
+	if (lines == BOX_LINES_NONE) {
+		*sx = menu->item_width + 2;
+		*sy = menu->count;
+	} else {
+		*sx = menu->width + 4;
+		*sy = menu->count + 2;
+	}
+}
+
 void
 menu_add_items(struct menu *menu, const struct menu_item *items,
     struct cmdq_item *qitem, struct client *c, struct cmd_find_state *fs)
@@ -142,6 +154,8 @@ menu_add_item(struct menu *menu, const struct menu_item *item,
 	width = format_width(new_item->name);
 	if (*new_item->name == '-')
 		width--;
+	if (width > menu->item_width)
+		menu->item_width = width;
 	if (width > menu->width)
 		menu->width = width;
 }
@@ -238,7 +252,7 @@ menu_update(struct menu_data *md)
 	screen_write_clearscreen(&ctx, 8);
 
 	if (md->border_lines != BOX_LINES_NONE) {
-		screen_write_box(&ctx, menu->width + 4, menu->count + 2,
+		screen_write_box(&ctx, menu_width(md), menu_height(md),
 		    md->border_lines, &md->border_style_gc, menu->title);
 	}
 
@@ -286,11 +300,13 @@ menu_destroy(struct window *w)
 void
 menu_get_cursor(struct menu_data *md, u_int *cx, u_int *cy)
 {
-	*cx = md->px + 2;
+	u_int	border = (md->border_lines != BOX_LINES_NONE);
+
+	*cx = md->px + 1 + border;
 	if (md->choice == -1)
 		*cy = md->py;
 	else
-		*cy = md->py + 1 + md->choice;
+		*cy = md->py + border + md->choice;
 }
 
 struct screen *
@@ -302,13 +318,19 @@ menu_screen(struct menu_data *md)
 u_int
 menu_width(struct menu_data *md)
 {
-	return (md->menu->width + 4);
+	u_int	sx, sy;
+
+	menu_get_size(md->menu, md->border_lines, &sx, &sy);
+	return (sx);
 }
 
 u_int
 menu_height(struct menu_data *md)
 {
-	return (md->menu->count + 2);
+	u_int	sx, sy;
+
+	menu_get_size(md->menu, md->border_lines, &sx, &sy);
+	return (sy);
 }
 
 u_int
@@ -338,6 +360,7 @@ menu_key(struct client *c, struct menu_data *md, struct key_event *event)
 	enum cmd_parse_status		 status;
 	char				*error;
 	key_code			 key;
+	u_int				 border;
 
 	if (KEYC_IS_MOUSE(event->key)) {
 		/*
@@ -353,10 +376,10 @@ menu_key(struct client *c, struct menu_data *md, struct key_event *event)
 				return (1);
 			return (0);
 		}
-		if (m->x < md->px ||
+		border = (md->border_lines != BOX_LINES_NONE);
-		    m->x > md->px + 4 + menu->width ||
+		if (m->x < md->px || m->x >= md->px + menu_width(md) ||
-		    m->y < md->py + 1 ||
+		    m->y < md->py + border ||
-		    m->y > md->py + 1 + n - 1) {
+		    m->y >= md->py + border + n) {
 			if (~md->flags & MENU_STAYOPEN) {
 				if (!move && MOUSE_RELEASE(m->b))
 					return (1);
@@ -379,7 +402,7 @@ menu_key(struct client *c, struct menu_data *md, struct key_event *event)
 			if (!MOUSE_WHEEL(m->b) && !MOUSE_DRAG(m->b))
 				goto chosen;
 		}
-		md->choice = m->y - (md->py + 1);
+		md->choice = m->y - (md->py + border);
 		if (md->choice != old)
 			server_redraw_window_menu(md->w);
 		return (0);
@@ -546,20 +569,16 @@ menu_resize(struct menu_data *md, struct window *w)
 
 	if (md == NULL)
 		return;
-
 	nx = md->px;
 	ny = md->py;
 
-	sx = md->menu->width + 4;
+	menu_get_size(md->menu, md->border_lines, &sx, &sy);
-	sy = md->menu->count + 2;
-
 	if (nx + sx > w->sx) {
 		if (w->sx <= sx)
 			nx = 0;
 		else
 			nx = w->sx - sx;
 	}
-
 	if (ny + sy > w->sy) {
 		if (w->sy <= sy)
 			ny = 0;
@@ -591,8 +610,9 @@ menu_display(struct menu *menu, int flags, int starting_choice,
 		w = fs->w;
 	o = w->options;
 
-	sx = menu->width + 4;
+	if (lines == BOX_LINES_DEFAULT)
-	sy = menu->count + 2;
+		lines = options_get_number(o, "menu-border-lines");
+	menu_get_size(menu, lines, &sx, &sy);
 	if (sx >= w->sx)
 		px = 0;
 	else if (px + sx > w->sx)
@@ -604,9 +624,6 @@ menu_display(struct menu *menu, int flags, int starting_choice,
 	w->menu_last_px = px;
 	w->menu_last_py = py;
 
-	if (lines == BOX_LINES_DEFAULT)
-		lines = options_get_number(o, "menu-border-lines");
-
 	md = xcalloc(1, sizeof *md);
 	md->w = w;
 	md->flags = flags;

mode-tree.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: mode-tree.c,v 1.101 2026/08/05 07:50:21 nicm Exp $ */
+/* $OpenBSD: mode-tree.c,v 1.103 2026/09/24 18:59:00 nicm Exp $ */
 
 /*
  * Copyright (c) 2017 Nicholas Marriott <nicholas.marriott@gmail.com>
@@ -277,11 +277,22 @@ mode_tree_free_items(struct mode_tree_list *mtl)
 static void
 mode_tree_check_selected(struct mode_tree_data *mtd)
 {
+	if (mtd->height == 0)
+		return;
+
+	/* If the list has shrunk, do not leave empty lines at the bottom. */
+	if (mtd->line_size <= mtd->height)
+		mtd->offset = 0;
+	else if (mtd->offset > mtd->line_size - mtd->height)
+		mtd->offset = mtd->line_size - mtd->height;
+
 	/*
-	 * If the current line would now be off screen reset the offset to the
+	 * If the current line would now be off screen move the offset so it is
-	 * last visible line.
+	 * visible.
 	 */
-	if (mtd->current > mtd->height - 1)
+	if (mtd->current < mtd->offset)
+		mtd->offset = mtd->current;
+	else if (mtd->current > mtd->offset + mtd->height - 1)
 		mtd->offset = mtd->current - mtd->height + 1;
 }
 
@@ -501,20 +512,14 @@ mode_tree_set_current(struct mode_tree_data *mtd, uint64_t tag)
 
 	if (mode_tree_get_tag(mtd, tag, &found)) {
 		mtd->current = found;
-		if (mtd->current > mtd->height - 1)
+		mode_tree_check_selected(mtd);
-			mtd->offset = mtd->current - mtd->height + 1;
-		else
-			mtd->offset = 0;
 		return (1);
 	}
 	if (mtd->current >= mtd->line_size) {
 		if (mtd->line_size == 0)
 			return (0);
 		mtd->current = mtd->line_size - 1;
-		if (mtd->current > mtd->height - 1)
+		mode_tree_check_selected(mtd);
-			mtd->offset = mtd->current - mtd->height + 1;
-		else
-			mtd->offset = 0;
 	}
 	return (0);
 }
@@ -683,13 +688,13 @@ mode_tree_build(struct mode_tree_data *mtd)
 
 	if (mtd->line_list != NULL && tag == UINT64_MAX)
 		tag = mtd->line_list[mtd->current].item->tag;
-	mode_tree_set_current(mtd, tag);
 
 	mtd->width = screen_size_x(s);
 	if (mtd->preview != MODE_TREE_PREVIEW_OFF)
 		mode_tree_set_height(mtd);
 	else
 		mtd->height = screen_size_y(s);
+	mode_tree_set_current(mtd, tag);
 	mode_tree_check_selected(mtd);
 }
 
@@ -1375,12 +1380,14 @@ static void
 mode_tree_display_menu(struct mode_tree_data *mtd, struct client *c, u_int x,
     u_int y, int outside)
 {
+	struct window		*w = mtd->wp->window;
 	struct mode_tree_item	*mti;
 	struct menu		*menu;
 	const struct menu_item	*items;
 	struct mode_tree_menu	*mtm;
 	char			*title;
-	u_int			 line;
+	enum box_lines		 lines;
+	u_int			 line, sx, sy;
 
 	if (mtd->offset + y > mtd->line_size - 1)
 		line = mtd->current;
@@ -1405,14 +1412,17 @@ mode_tree_display_menu(struct mode_tree_data *mtd, struct client *c, u_int x,
 	mtm->line = line;
 	mtd->references++;
 
-	if (x >= (menu->width + 4) / 2)
+	lines = options_get_number(w->options, "menu-border-lines");
-		x -= (menu->width + 4) / 2;
+	menu_get_size(menu, lines, &sx, &sy);
+	if (x >= sx / 2)
+		x -= sx / 2;
 	else
 		x = 0;
 	x += mtd->wp->xoff;
 	y += mtd->wp->yoff;
-	if (menu_display(menu, 0, 0, NULL, x, y, c, BOX_LINES_DEFAULT, NULL,
+
-	    NULL, NULL, NULL, mode_tree_menu_callback, mtm) != 0) {
+	if (menu_display(menu, 0, 0, NULL, x, y, c, lines, NULL, NULL, NULL,
+	    NULL, mode_tree_menu_callback, mtm) != 0) {
 		mode_tree_remove_ref(mtd);
 		free(mtm);
 		menu_free(menu);

monitor.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: monitor.c,v 1.7 2026/07/27 19:15:58 nicm Exp $ */
+/* $OpenBSD: monitor.c,v 1.8 2026/09/07 10:15:25 nicm Exp $ */
 
 /*
  * Copyright (c) 2026 Nicholas Marriott <nicholas.marriott@gmail.com>
@@ -614,8 +614,10 @@ monitor_parse(const char *value, char **name, enum monitor_type *type, int *id,
 		*type = MONITOR_ALL_WINDOWS;
 	else if (sscanf(what, "@%d", id) == 1 && *id >= 0)
 		*type = MONITOR_WINDOW;
-	else
+	else if (*what == '\0')
 		*type = MONITOR_SESSION;
+	else
+		goto fail;
 	*name = xstrdup(copy);
 	*format = xstrdup(split);
 

options-table.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: options-table.c,v 1.244 2026/09/01 12:49:49 nicm Exp $ */
+/* $OpenBSD: options-table.c,v 1.247 2026/09/21 10:22:31 nicm Exp $ */
 
 /*
  * Copyright (c) 2011 Nicholas Marriott <nicholas.marriott@gmail.com>
@@ -76,9 +76,10 @@ static const char *options_table_pane_border_indicators_list[] = {
 	"off", "colour", "arrows", "both", NULL
 };
 static const char *options_table_pane_border_lines_list[] = {
-	"single", "double", "heavy", "simple", "number", "spaces", "none", NULL
+	"single", "double", "heavy", "simple", "number", "spaces", "none",
+	"rounded", NULL
 };
-static const char *options_table_popup_border_lines_list[] = {
+static const char *options_table_menu_border_lines_list[] = {
 	"single", "double", "heavy", "simple", "rounded", "padded", "none", NULL
 };
 static const char *options_table_set_clipboard_list[] = {
@@ -91,7 +92,7 @@ static const char *options_table_window_size_list[] = {
 	"largest", "smallest", "manual", "latest", NULL
 };
 static const char *options_table_remain_on_exit_list[] = {
-	"off", "on", "failed", "key", NULL
+	"off", "on", "failed", "key", "failed-key", NULL
 };
 static const char *options_table_destroy_unattached_list[] = {
 	"off", "on", "keep-last", "keep-group", NULL
@@ -492,7 +493,7 @@ const struct options_table_entry options_table[] = {
 	{ .name = "menu-border-lines",
 	  .type = OPTIONS_TABLE_CHOICE,
 	  .scope = OPTIONS_TABLE_WINDOW,
-	  .choices = options_table_popup_border_lines_list,
+	  .choices = options_table_menu_border_lines_list,
 	  .default_num = BOX_LINES_SINGLE,
 	  .text = "Type of characters used to draw menu border lines. Some of "
 		  "these are only supported on terminals with UTF-8 support."
@@ -1665,40 +1666,14 @@ const struct options_table_entry options_table[] = {
 	  .text = "Pane scrollbar position."
 	},
 
-	{ .name = "popup-style",
-	  .type = OPTIONS_TABLE_STRING,
-	  .scope = OPTIONS_TABLE_WINDOW,
-	  .default_str = "bg=themedarkgrey,fg=themewhite",
-	  .flags = OPTIONS_TABLE_IS_STYLE,
-	  .separator = ",",
-	  .text = "Default style of popups."
-	},
-
-	{ .name = "popup-border-style",
-	  .type = OPTIONS_TABLE_STRING,
-	  .scope = OPTIONS_TABLE_WINDOW,
-	  .default_str = "bg=themedarkgrey,fg=themelightgrey",
-	  .flags = OPTIONS_TABLE_IS_STYLE,
-	  .separator = ",",
-	  .text = "Default style of popup borders."
-	},
-
-	{ .name = "popup-border-lines",
-	  .type = OPTIONS_TABLE_CHOICE,
-	  .scope = OPTIONS_TABLE_WINDOW,
-	  .choices = options_table_popup_border_lines_list,
-	  .default_num = BOX_LINES_SINGLE,
-	  .text = "Type of characters used to draw popup border lines. Some of "
-		  "these are only supported on terminals with UTF-8 support."
-	},
-
 	{ .name = "remain-on-exit",
 	  .type = OPTIONS_TABLE_CHOICE,
 	  .scope = OPTIONS_TABLE_WINDOW|OPTIONS_TABLE_PANE,
 	  .choices = options_table_remain_on_exit_list,
 	  .default_num = 0,
 	  .text = "Whether panes should remain ('on'), remain until a key is "
-		  "pressed ('key') or be automatically killed ('off' or "
+		  "pressed after any exit ('key') or after a failure "
+		  "('failed-key'), or be automatically killed ('off' or "
 		  "'failed') when the program inside exits."
 	},
 

popup.c

@@ -1,661 +0,0 @@
-/* $OpenBSD: popup.c,v 1.77 2026/08/28 08:02:16 nicm Exp $ */
-
-/*
- * Copyright (c) 2020 Nicholas Marriott <nicholas.marriott@gmail.com>
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF MIND, USE, DATA OR PROFITS, WHETHER
- * IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
- * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include <sys/types.h>
-#include <sys/wait.h>
-
-#include <signal.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-
-#include "tmux.h"
-
-struct popup_data {
-	struct client		 *c;
-	struct cmdq_item	 *item;
-	int			  flags;
-	char			 *title;
-
-	char			 *style;
-	char			 *border_style;
-	struct grid_cell	  border_cell;
-	enum box_lines		  border_lines;
-
-	struct screen		  s;
-	struct grid_cell	  defaults;
-	struct colour_palette	  palette;
-
-	struct visible_ranges	  r;
-
-	struct job		 *job;
-	struct input_ctx	 *ictx;
-	int			  status;
-	popup_close_cb		  cb;
-	void			 *arg;
-
-	int			  close;
-
-	/* Current position and size. */
-	u_int			  px;
-	u_int			  py;
-	u_int			  sx;
-	u_int			  sy;
-
-	/* Preferred position and size. */
-	u_int			  ppx;
-	u_int			  ppy;
-	u_int			  psx;
-	u_int			  psy;
-
-	enum { OFF, MOVE, SIZE }  dragging;
-	u_int			  dx;
-	u_int			  dy;
-
-	u_int			  lx;
-	u_int			  ly;
-	u_int			  lb;
-};
-
-static void
-popup_free(struct popup_data *pd)
-{
-	server_client_unref(pd->c);
-
-	if (pd->job != NULL)
-		job_free(pd->job);
-	if (pd->ictx != NULL)
-		input_free(pd->ictx);
-
-	free(pd->r.ranges);
-	screen_free(&pd->s);
-	colour_palette_free(&pd->palette);
-
-	free(pd->title);
-	free(pd->style);
-	free(pd->border_style);
-	free(pd);
-}
-
-static void
-popup_reapply_styles(struct popup_data *pd)
-{
-	struct client		*c = pd->c;
-	struct session		*s = c->session;
-	struct options		*o;
-	struct format_tree	*ft;
-	struct style		 sytmp;
-
-	if (s == NULL)
-		return;
-	o = s->curw->window->options;
-
-	ft = format_create_defaults(NULL, c, s, s->curw, NULL);
-
-	/* Reapply popup style from options. */
-	memcpy(&pd->defaults, &grid_default_cell, sizeof pd->defaults);
-	style_apply(&pd->defaults, o, "popup-style", ft);
-	if (pd->style != NULL) {
-		style_set(&sytmp, &grid_default_cell);
-		if (style_parse(&sytmp, &pd->defaults, pd->style) == 0) {
-			pd->defaults.fg = sytmp.gc.fg;
-			pd->defaults.bg = sytmp.gc.bg;
-		}
-	}
-	pd->defaults.attr = 0;
-
-	/* Reapply border style from options. */
-	memcpy(&pd->border_cell, &grid_default_cell, sizeof pd->border_cell);
-	style_apply(&pd->border_cell, o, "popup-border-style", ft);
-	if (pd->border_style != NULL) {
-		style_set(&sytmp, &grid_default_cell);
-		if (style_parse(&sytmp, &pd->border_cell,
-		    pd->border_style) == 0) {
-			pd->border_cell.fg = sytmp.gc.fg;
-			pd->border_cell.bg = sytmp.gc.bg;
-		}
-	}
-	pd->border_cell.attr = 0;
-
-	format_free(ft);
-}
-
-static void
-popup_redraw_cb(const struct tty_ctx *ttyctx)
-{
-	struct popup_data	*pd = ttyctx->arg;
-
-	pd->c->flags |= CLIENT_REDRAWOVERLAY;
-}
-
-static int
-popup_set_client_cb(struct tty_ctx *ttyctx, struct client *c)
-{
-	struct popup_data	*pd = ttyctx->arg;
-
-	if (c != pd->c)
-		return (0);
-	if (pd->c->flags & CLIENT_REDRAWOVERLAY)
-		return (0);
-
-	ttyctx->wox = 0;
-	ttyctx->woy = 0;
-	ttyctx->wsx = c->tty.sx;
-	ttyctx->wsy = c->tty.sy;
-
-	if (pd->border_lines == BOX_LINES_NONE) {
-		ttyctx->xoff = ttyctx->rxoff = pd->px;
-		ttyctx->yoff = ttyctx->ryoff = pd->py;
-	} else {
-		ttyctx->xoff = ttyctx->rxoff = pd->px + 1;
-		ttyctx->yoff = ttyctx->ryoff = pd->py + 1;
-	}
-
-	return (1);
-}
-
-static void
-popup_init_ctx_cb(struct screen_write_ctx *ctx, struct tty_ctx *ttyctx)
-{
-	struct popup_data	*pd = ctx->arg;
-
-	memcpy(&ttyctx->defaults, &pd->defaults, sizeof ttyctx->defaults);
-	ttyctx->flags &= ~TTY_CTX_WINDOW_BIGGER;
-	ttyctx->style_ctx.defaults = &ttyctx->defaults;
-	ttyctx->style_ctx.palette = &pd->palette;
-	ttyctx->redraw_cb = popup_redraw_cb;
-	ttyctx->set_client_cb = popup_set_client_cb;
-	ttyctx->arg = pd;
-}
-
-static struct screen *
-popup_mode_cb(__unused struct client *c, void *data, u_int *cx, u_int *cy)
-{
-	struct popup_data	*pd = data;
-
-	if (pd->border_lines == BOX_LINES_NONE) {
-		*cx = pd->px + pd->s.cx;
-		*cy = pd->py + pd->s.cy;
-	} else {
-		*cx = pd->px + 1 + pd->s.cx;
-		*cy = pd->py + 1 + pd->s.cy;
-	}
-	return (&pd->s);
-}
-
-/* Return parts of the input range which are not obstructed by the popup. */
-static struct visible_ranges *
-popup_check_cb(__unused struct client* c, void *data, u_int px, u_int py,
-    u_int nx)
-{
-	struct popup_data	*pd = data;
-	struct visible_ranges	*r = &pd->r;
-
-	server_client_overlay_range(pd->px, pd->py, pd->sx, pd->sy, px, py, nx,
-	    r);
-	return (r);
-}
-
-static void
-popup_draw_cb(struct client *c, void *data)
-{
-	struct popup_data	*pd = data;
-	struct tty		*tty = &c->tty;
-	struct screen		 s;
-	struct screen_write_ctx	 ctx;
-	u_int			 i, px = pd->px, py = pd->py;
-	struct grid_cell	 defaults;
-	struct tty_style_ctx	 style_ctx;
-
-	popup_reapply_styles(pd);
-
-	screen_init(&s, pd->sx, pd->sy, 0);
-	if (pd->s.hyperlinks != NULL) {
-		hyperlinks_free(s.hyperlinks);
-		s.hyperlinks = hyperlinks_copy(pd->s.hyperlinks);
-	}
-	screen_write_start(&ctx, &s);
-	screen_write_clearscreen(&ctx, 8);
-
-	if (pd->border_lines == BOX_LINES_NONE) {
-		screen_write_cursormove(&ctx, 0, 0, 0);
-		screen_write_fast_copy(&ctx, &pd->s, 0, 0, pd->sx, pd->sy);
-	} else if (pd->sx > 2 && pd->sy > 2) {
-		screen_write_box(&ctx, pd->sx, pd->sy, pd->border_lines,
-		    &pd->border_cell, pd->title);
-		screen_write_cursormove(&ctx, 1, 1, 0);
-		screen_write_fast_copy(&ctx, &pd->s, 0, 0, pd->sx - 2,
-		    pd->sy - 2);
-	}
-	screen_write_stop(&ctx);
-
-	memcpy(&defaults, &pd->defaults, sizeof defaults);
-	if (defaults.fg == 8)
-		defaults.fg = pd->palette.fg;
-	if (defaults.bg == 8)
-		defaults.bg = pd->palette.bg;
-	style_ctx.defaults = &defaults;
-	style_ctx.palette = &pd->palette;
-	style_ctx.dim = 0;
-	style_ctx.hyperlinks = s.hyperlinks;
-
-	c->overlay_check = NULL;
-	c->overlay_data = NULL;
-	for (i = 0; i < pd->sy; i++)
-		tty_draw_line(tty, &s, 0, i, pd->sx, px, py + i, &style_ctx);
-	screen_free(&s);
-	c->overlay_check = popup_check_cb;
-	c->overlay_data = pd;
-}
-
-static void
-popup_free_cb(__unused struct client *c, void *data)
-{
-	struct popup_data	*pd = data;
-	struct cmdq_item	*item = pd->item;
-
-	if (pd->cb != NULL)
-		pd->cb(pd->status, pd->arg);
-
-	if (item != NULL) {
-		if (cmdq_get_client(item) != NULL &&
-		    cmdq_get_client(item)->session == NULL)
-			cmdq_get_client(item)->retval = pd->status;
-		cmdq_continue(item);
-	}
-
-	popup_free(pd);
-}
-
-static void
-popup_resize_cb(__unused struct client *c, void *data)
-{
-	struct popup_data	*pd = data;
-	struct tty		*tty = &c->tty;
-
-	if (pd == NULL)
-		return;
-
-	/* Adjust position and size. */
-	if (pd->psy > tty->sy)
-		pd->sy = tty->sy;
-	else
-		pd->sy = pd->psy;
-	if (pd->psx > tty->sx)
-		pd->sx = tty->sx;
-	else
-		pd->sx = pd->psx;
-	if (pd->ppy + pd->sy > tty->sy)
-		pd->py = tty->sy - pd->sy;
-	else
-		pd->py = pd->ppy;
-	if (pd->ppx + pd->sx > tty->sx)
-		pd->px = tty->sx - pd->sx;
-	else
-		pd->px = pd->ppx;
-
-	/* Avoid zero size screens. */
-	if (pd->border_lines == BOX_LINES_NONE) {
-		screen_resize(&pd->s, pd->sx, pd->sy, 0);
-		if (pd->job != NULL)
-			job_resize(pd->job, pd->sx, pd->sy );
-	} else if (pd->sx > 2 && pd->sy > 2) {
-		screen_resize(&pd->s, pd->sx - 2, pd->sy - 2, 0);
-		if (pd->job != NULL)
-			job_resize(pd->job, pd->sx - 2, pd->sy - 2);
-	}
-}
-
-static void
-popup_handle_drag(struct client *c, struct popup_data *pd,
-    struct mouse_event *m)
-{
-	u_int	px, py;
-
-	if (!MOUSE_DRAG(m->b))
-		pd->dragging = OFF;
-	else if (pd->dragging == MOVE) {
-		if (m->x < pd->dx)
-			px = 0;
-		else if (m->x - pd->dx + pd->sx > c->tty.sx)
-			px = c->tty.sx - pd->sx;
-		else
-			px = m->x - pd->dx;
-		if (m->y < pd->dy)
-			py = 0;
-		else if (m->y - pd->dy + pd->sy > c->tty.sy)
-			py = c->tty.sy - pd->sy;
-		else
-			py = m->y - pd->dy;
-		pd->px = px;
-		pd->py = py;
-		pd->dx = m->x - pd->px;
-		pd->dy = m->y - pd->py;
-		pd->ppx = px;
-		pd->ppy = py;
-		server_redraw_client(c);
-	} else if (pd->dragging == SIZE) {
-		if (pd->border_lines == BOX_LINES_NONE) {
-			if (m->x < pd->px + 1)
-				return;
-			if (m->y < pd->py + 1)
-				return;
-		} else {
-			if (m->x < pd->px + 3)
-				return;
-			if (m->y < pd->py + 3)
-				return;
-		}
-		pd->sx = m->x - pd->px;
-		pd->sy = m->y - pd->py;
-		pd->psx = pd->sx;
-		pd->psy = pd->sy;
-
-		if (pd->border_lines == BOX_LINES_NONE) {
-			screen_resize(&pd->s, pd->sx, pd->sy, 0);
-			if (pd->job != NULL)
-				job_resize(pd->job, pd->sx, pd->sy);
-		} else {
-			screen_resize(&pd->s, pd->sx - 2, pd->sy - 2, 0);
-			if (pd->job != NULL)
-				job_resize(pd->job, pd->sx - 2, pd->sy - 2);
-		}
-		server_redraw_client(c);
-	}
-}
-
-static int
-popup_key_cb(struct client *c, void *data, struct key_event *event)
-{
-	struct popup_data	*pd = data;
-	struct mouse_event	*m = &event->m;
-	const char		*buf;
-	size_t			 len;
-	u_int			 px, py;
-	enum { NONE, LEFT, RIGHT, TOP, BOTTOM } border = NONE;
-
-	if (KEYC_IS_MOUSE(event->key)) {
-		if (pd->dragging != OFF) {
-			popup_handle_drag(c, pd, m);
-			goto out;
-		}
-		if (m->x < pd->px ||
-		    m->x > pd->px + pd->sx - 1 ||
-		    m->y < pd->py ||
-		    m->y > pd->py + pd->sy - 1) {
-			return (0);
-		}
-		if (pd->border_lines != BOX_LINES_NONE) {
-			if (m->x == pd->px)
-				border = LEFT;
-			else if (m->x == pd->px + pd->sx - 1)
-				border = RIGHT;
-			else if (m->y == pd->py)
-				border = TOP;
-			else if (m->y == pd->py + pd->sy - 1)
-				border = BOTTOM;
-		}
-		if ((m->b & MOUSE_MASK_MODIFIERS) == 0 &&
-		    MOUSE_BUTTONS(m->b) == MOUSE_BUTTON_3 &&
-		    (border == LEFT || border == TOP))
-			goto out;
-		if (((m->b & MOUSE_MASK_MODIFIERS) == MOUSE_MASK_META) ||
-		    (border != NONE && !MOUSE_DRAG(m->lb))) {
-			if (!MOUSE_DRAG(m->b))
-				goto out;
-			if (MOUSE_BUTTONS(m->lb) == MOUSE_BUTTON_1)
-				pd->dragging = MOVE;
-			else if (MOUSE_BUTTONS(m->lb) == MOUSE_BUTTON_3)
-				pd->dragging = SIZE;
-			pd->dx = m->lx - pd->px;
-			pd->dy = m->ly - pd->py;
-			goto out;
-		}
-	}
-	if ((((pd->flags & (POPUP_CLOSEEXIT|POPUP_CLOSEEXITZERO)) == 0) ||
-	    pd->job == NULL) &&
-	    (event->key == '\033' || event->key == ('c'|KEYC_CTRL)))
-		return (1);
-	if (pd->job == NULL && (pd->flags & POPUP_CLOSEANYKEY) &&
-	    !KEYC_IS_MOUSE(event->key) && !KEYC_IS_PASTE(event->key))
-		return (1);
-	if (pd->job != NULL) {
-		if (KEYC_IS_MOUSE(event->key)) {
-			/* Must be inside, checked already. */
-			if (pd->border_lines == BOX_LINES_NONE) {
-				px = m->x - pd->px;
-				py = m->y - pd->py;
-			} else {
-				px = m->x - pd->px - 1;
-				py = m->y - pd->py - 1;
-			}
-			if (!input_key_get_mouse(&pd->s, m, px, py, &buf, &len))
-				return (0);
-			bufferevent_write(job_get_event(pd->job), buf, len);
-			return (0);
-		}
-		input_key(&pd->s, job_get_event(pd->job), event->key);
-	}
-	return (0);
-
-out:
-	pd->lx = m->x;
-	pd->ly = m->y;
-	pd->lb = m->b;
-	return (0);
-}
-
-static void
-popup_job_update_cb(struct job *job)
-{
-	struct popup_data	*pd = job_get_data(job);
-	struct evbuffer		*evb = job_get_event(job)->input;
-	struct client		*c = pd->c;
-	struct screen		*s = &pd->s;
-	void			*data = EVBUFFER_DATA(evb);
-	size_t			 size = EVBUFFER_LENGTH(evb);
-
-	if (size == 0)
-		return;
-
-	c->overlay_check = NULL;
-	c->overlay_data = NULL;
-	input_parse_screen(pd->ictx, s, popup_init_ctx_cb, pd, data, size);
-	c->overlay_check = popup_check_cb;
-	c->overlay_data = pd;
-
-	evbuffer_drain(evb, size);
-}
-
-static void
-popup_job_complete_cb(struct job *job)
-{
-	struct popup_data	*pd = job_get_data(job);
-	int			 status;
-
-	status = job_get_status(pd->job);
-	if (WIFEXITED(status))
-		pd->status = WEXITSTATUS(status);
-	else if (WIFSIGNALED(status))
-		pd->status = WTERMSIG(status);
-	else
-		pd->status = 0;
-	pd->job = NULL;
-
-	if ((pd->flags & POPUP_CLOSEEXIT) ||
-	    ((pd->flags & POPUP_CLOSEEXITZERO) && pd->status == 0))
-		server_client_clear_overlay(pd->c);
-}
-
-int
-popup_present(struct client *c)
-{
-	return (c->overlay_draw == popup_draw_cb);
-}
-
-int
-popup_modify(struct client *c, const char *title, const char *style,
-	const char *border_style, enum box_lines lines, int flags)
-{
-	struct popup_data		*pd = c->overlay_data;
-	struct style		sytmp;
-
-	if (title != NULL) {
-		if (pd->title != NULL)
-			free(pd->title);
-		pd->title = xstrdup(title);
-	}
-	if (border_style != NULL) {
-		free(pd->border_style);
-		pd->border_style = xstrdup(border_style);
-		style_set(&sytmp, &pd->border_cell);
-		if (style_parse(&sytmp, &pd->border_cell, border_style) == 0) {
-			pd->border_cell.fg = sytmp.gc.fg;
-			pd->border_cell.bg = sytmp.gc.bg;
-		}
-	}
-	if (style != NULL) {
-		free(pd->style);
-		pd->style = xstrdup(style);
-		style_set(&sytmp, &pd->defaults);
-		if (style_parse(&sytmp, &pd->defaults, style) == 0) {
-			pd->defaults.fg = sytmp.gc.fg;
-			pd->defaults.bg = sytmp.gc.bg;
-		}
-	}
-	if (lines != BOX_LINES_DEFAULT) {
-		if (lines == BOX_LINES_NONE && pd->border_lines != lines) {
-			screen_resize(&pd->s, pd->sx, pd->sy, 1);
-			job_resize(pd->job, pd->sx, pd->sy);
-		} else if (pd->border_lines == BOX_LINES_NONE &&
-		    pd->border_lines != lines) {
-			screen_resize(&pd->s, pd->sx - 2, pd->sy - 2, 1);
-			job_resize(pd->job, pd->sx - 2, pd->sy - 2);
-		}
-		pd->border_lines = lines;
-		tty_resize(&c->tty);
-	}
-	if (flags != -1)
-		pd->flags = flags;
-
-	server_redraw_client(c);
-	return (0);
-}
-
-int
-popup_display(int flags, enum box_lines lines, struct cmdq_item *item, u_int px,
-    u_int py, u_int sx, u_int sy, struct environ *env, const char *shellcmd,
-    int argc, char **argv, const char *cwd, const char *title, struct client *c,
-    struct session *s, const char *style, const char *border_style,
-    popup_close_cb cb, void *arg)
-{
-	struct popup_data	*pd;
-	u_int			 jx, jy;
-	struct options		*o;
-	struct style		 sytmp;
-
-	if (s != NULL)
-		o = s->curw->window->options;
-	else
-		o = c->session->curw->window->options;
-
-	if (lines == BOX_LINES_DEFAULT)
-		lines = options_get_number(o, "popup-border-lines");
-	if (lines == BOX_LINES_NONE) {
-		if (sx < 1 || sy < 1)
-			return (-1);
-		jx = sx;
-		jy = sy;
-	} else {
-		if (sx < 3 || sy < 3)
-			return (-1);
-		jx = sx - 2;
-		jy = sy - 2;
-	}
-	if (c->tty.sx < sx || c->tty.sy < sy)
-		return (-1);
-
-	pd = xcalloc(1, sizeof *pd);
-	pd->item = item;
-	pd->flags = flags;
-
-	if (title != NULL)
-		pd->title = xstrdup(title);
-	if (style != NULL)
-		pd->style = xstrdup(style);
-	if (border_style != NULL)
-		pd->border_style = xstrdup(border_style);
-
-	pd->c = c;
-	pd->c->references++;
-
-	pd->cb = cb;
-	pd->arg = arg;
-	pd->status = 128 + SIGHUP;
-
-	pd->border_lines = lines;
-	memcpy(&pd->border_cell, &grid_default_cell, sizeof pd->border_cell);
-	style_apply(&pd->border_cell, o, "popup-border-style", NULL);
-	if (border_style != NULL) {
-		style_set(&sytmp, &grid_default_cell);
-		if (style_parse(&sytmp, &pd->border_cell, border_style) == 0) {
-			pd->border_cell.fg = sytmp.gc.fg;
-			pd->border_cell.bg = sytmp.gc.bg;
-		}
-	}
-	pd->border_cell.attr = 0;
-
-	screen_init(&pd->s, jx, jy, 0);
-	screen_set_default_cursor(&pd->s, global_w_options);
-	colour_palette_init(&pd->palette);
-	colour_palette_from_option(&pd->palette, global_w_options);
-
-	memcpy(&pd->defaults, &grid_default_cell, sizeof pd->defaults);
-	style_apply(&pd->defaults, o, "popup-style", NULL);
-	if (style != NULL) {
-		style_set(&sytmp, &grid_default_cell);
-		if (style_parse(&sytmp, &pd->defaults, style) == 0) {
-			pd->defaults.fg = sytmp.gc.fg;
-			pd->defaults.bg = sytmp.gc.bg;
-		}
-	}
-	pd->defaults.attr = 0;
-
-	pd->px = px;
-	pd->py = py;
-	pd->sx = sx;
-	pd->sy = sy;
-
-	pd->ppx = px;
-	pd->ppy = py;
-	pd->psx = sx;
-	pd->psy = sy;
-
-	pd->job = job_run(shellcmd, argc, argv, env, s, cwd,
-	    popup_job_update_cb, popup_job_complete_cb, NULL, pd,
-	    JOB_NOWAIT|JOB_PTY|JOB_KEEPWRITE|JOB_DEFAULTSHELL, jx, jy);
-	if (pd->job == NULL) {
-		popup_free(pd);
-		return (-1);
-	}
-	pd->ictx = input_init(NULL, job_get_event(pd->job), &pd->palette, c);
-
-	server_client_set_overlay(c, 0, popup_check_cb, popup_mode_cb,
-	    popup_draw_cb, popup_key_cb, popup_free_cb, popup_resize_cb, pd);
-	return (0);
-}

prompt.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: prompt.c,v 1.6 2026/08/17 06:45:16 nicm Exp $ */
+/* $OpenBSD: prompt.c,v 1.7 2026/09/09 07:53:03 nicm Exp $ */
 
 /*
  * Copyright (c) 2026 Nicholas Marriott <nicholas.marriott@gmail.com>
@@ -1493,9 +1493,11 @@ append_key:
 		utf8_set(&tmp, key);
 		if (key <= 0x1f || key == 0x7f)
 			tmp.width = 2;
-	} else if (KEYC_IS_UNICODE(key))
+	} else if (KEYC_IS_UNICODE(key)) {
 		utf8_to_data(key, &tmp);
-	else
+		if (tmp.size == 0)
+			return (PROMPT_KEY_HANDLED);
+	} else
 		return (PROMPT_KEY_HANDLED);
 
 	pr->buffer = xreallocarray(pr->buffer, size + 2,

regress/Makefile

@@ -1,33 +1,17 @@
 TESTS!= echo *.sh
 LOGDIR=logs
 
-.PHONY: all
+.PHONY: all prepare $(TESTS)
-.NOTPARALLEL: all
 
-all:
+all: prepare $(TESTS)
-	@mkdir -p "$(LOGDIR)"; \
+	@failed=0; failures=; \
-	rm -f "$(LOGDIR)"/*.log; \
-	failed=0; failures=; \
 	for test in $(TESTS); do \
 		base=$${test##*/}; \
 		log="$(LOGDIR)/$${base%.sh}.log"; \
-		rm -f "$$log"; \
+		if [ -f "$$log" ]; then \
-		printf '%-40s ' "$$test"; \
-		start=$$(date +%s); \
-		env -i LC_CTYPE=C.UTF-8 MallocNanoZone=0 \
-		    sh -x "$$test" >"$$log" 2>&1; \
-		if [ $$? -eq 0 ]; then \
-			end=$$(date +%s); \
-			rm -f "$$log"; \
-			echo "PASS ($$((end - start))s)"; \
-		else \
-			end=$$(date +%s); \
-			echo "FAIL ($$((end - start))s)"; \
-			echo " log: $$log"; \
 			failed=1; \
 			failures="$$failures $$test"; \
 		fi; \
-		sleep 1; \
 	done; \
 	if [ "$$failed" -ne 0 ]; then \
 		echo; \
@@ -39,3 +23,22 @@ all:
 		rmdir "$(LOGDIR)" 2>/dev/null || true; \
 	fi; \
 	exit $$failed
+
+prepare:
+	@mkdir -p "$(LOGDIR)"
+	@rm -f "$(LOGDIR)"/*.log
+
+$(TESTS): prepare
+	@base="$@"; base=$${base##*/}; \
+	log="$(LOGDIR)/$${base%.sh}.log"; \
+	start=$$(date +%s); \
+	if env -i LC_CTYPE=C.UTF-8 MallocNanoZone=0 \
+	    sh -x "$@" >"$$log" 2>&1; then \
+		end=$$(date +%s); \
+		rm -f "$$log"; \
+		printf '%-40s PASS (%ss)\n' "$@" "$$((end - start))"; \
+	else \
+		end=$$(date +%s); \
+		printf '%-40s FAIL (%ss)\n log: %s\n' \
+		    "$@" "$$((end - start))" "$$log"; \
+	fi

regress/alerts.sh

@@ -2,8 +2,9 @@
 
 # monitor-activity, monitor-bell and monitor-silence: both the
 # alert-activity, alert-bell and alert-silence hooks and the winlink alert
-# flags (window_activity_flag, window_bell_flag, window_silence_flag and
+# flags (window_activity_flag, window_bell_flag, window_silence_flag,
-# the #, !, ~ characters in window_flags). The sessions are detached so
+# their session equivalents and the #, !, ~ characters in window_flags).
+# The sessions are detached so
 # alert flags are set even on the current window; the *-action options
 # still decide whether the hooks fire. Panes run cat: activity is
 # generated by the tty echo of send-keys and a bell by sending a BEL and
@@ -111,6 +112,24 @@ flags_have()
 	esac
 }
 
+assert_session_flag()
+{
+	flag="#{session_${1}_flag}"
+	expected=$2
+
+	# Only mon exists here. Check both window contexts and list-sessions.
+	for target in mon:w0 "mon:$3"; do
+		value=$($TMUX display -pt "$target" "$flag") ||
+			fail "display $flag failed"
+		[ "$value" = "$expected" ] ||
+			fail "expected $flag for $target to be '$expected' but got '$value'"
+	done
+	value=$($TMUX list-sessions -F "$flag") ||
+		fail "list-sessions $flag failed"
+	[ "$value" = "$expected" ] ||
+		fail "expected list-sessions $flag to be '$expected' but got '$value'"
+}
+
 flags_lack()
 {
 	target=$1
@@ -150,10 +169,12 @@ $TMUX set-hook -g alert-silence \
 # alert-bell and sets the bell flag, shown as ! in window_flags.
 $TMUX neww -d -t mon: -n bellw cat || fail "new-window bellw failed"
 assert_fmt_unchanged mon:bellw '#{window_bell_flag}' 0
+assert_session_flag bell 0 bellw
 flags_lack mon:bellw '!'
 bell mon:bellw
 wait_for @log '|alert-bell:mon:bellw'
 wait_for_fmt mon:bellw '#{window_bell_flag}' 1
+assert_session_flag bell 1 bellw
 flags_have mon:bellw '!'
 
 # Bells are not deduplicated: a second bell fires the hook again even
@@ -164,6 +185,7 @@ wait_for @log '|alert-bell:mon:bellw|alert-bell:mon:bellw'
 # Selecting the window clears the alert flags.
 $TMUX selectw -t mon:bellw || fail "select-window bellw failed"
 wait_for_fmt mon:bellw '#{window_bell_flag}' 0
+assert_session_flag bell 0 bellw
 flags_lack mon:bellw '!'
 $TMUX selectw -t mon:w0 || fail "select-window w0 failed"
 
@@ -173,6 +195,7 @@ $TMUX set -g @log '' || fail "reset @log failed"
 bell mon:w0
 wait_for @log '|alert-bell:mon:w0'
 wait_for_fmt mon:w0 '#{window_bell_flag}' 1
+assert_session_flag bell 1 bellw
 $TMUX selectw -t mon:bellw || fail "select-window bellw failed"
 $TMUX selectw -t mon:w0 || fail "select-window w0 failed"
 wait_for_fmt mon:w0 '#{window_bell_flag}' 0
@@ -199,6 +222,7 @@ $TMUX neww -d -t mon: -n actw cat || fail "new-window actw failed"
 $TMUX set -g @log '' || fail "reset @log failed"
 activity mon:actw
 assert_fmt_unchanged mon:actw '#{window_activity_flag}' 0
+assert_session_flag activity 0 actw
 assert_unchanged @log ''
 
 # With monitor-activity on, output fires alert-activity and sets the
@@ -208,6 +232,7 @@ $TMUX set -wt mon:actw monitor-activity on ||
 activity mon:actw
 wait_for @log '|alert-activity:mon:actw'
 wait_for_fmt mon:actw '#{window_activity_flag}' 1
+assert_session_flag activity 1 actw
 flags_have mon:actw '#'
 
 # While the flag is set further activity does not fire the hook again.
@@ -234,6 +259,7 @@ exec 3>"$OUT/fifo"
 wait_for_fmt mon: '#{session_attached}' 1
 $TMUX selectw -t mon:actw || fail "select-window actw failed"
 wait_for_fmt mon:actw '#{window_activity_flag}' 0
+assert_session_flag activity 0 actw
 flags_lack mon:actw '#'
 $TMUX selectw -t mon:w0 || fail "select-window w0 failed"
 exec 3>&-
@@ -250,6 +276,7 @@ $TMUX set -wt mon:w0 monitor-activity on ||
 $TMUX set -g @log '' || fail "reset @log failed"
 activity mon:w0
 wait_for_fmt mon:w0 '#{window_activity_flag}' 1
+assert_session_flag activity 1 actw
 assert_unchanged @log ''
 $TMUX set -wut mon:w0 monitor-activity ||
 	fail "unset monitor-activity w0 failed"
@@ -273,16 +300,19 @@ $TMUX selectw -t mon:w0 || fail "select-window w0 failed"
 # running.
 $TMUX neww -d -t mon: -n silw cat || fail "new-window silw failed"
 assert_fmt_unchanged mon:silw '#{window_silence_flag}' 0
+assert_session_flag silence 0 silw
 $TMUX set -g @log '' || fail "reset @log failed"
 $TMUX set -wt mon:silw monitor-silence 1 || fail "set monitor-silence failed"
 wait_for @log '|alert-silence:mon:silw'
 wait_for_fmt mon:silw '#{window_silence_flag}' 1
+assert_session_flag silence 1 silw
 flags_have mon:silw '~'
 assert_unchanged @log '|alert-silence:mon:silw'
 $TMUX set -wt mon:silw monitor-silence 0 ||
 	fail "reset monitor-silence failed"
 $TMUX selectw -t mon:silw || fail "select-window silw failed"
 wait_for_fmt mon:silw '#{window_silence_flag}' 0
+assert_session_flag silence 0 silw
 flags_lack mon:silw '~'
 $TMUX selectw -t mon:w0 || fail "select-window w0 failed"
 

regress/attach-session-redraw.sh

@@ -0,0 +1,79 @@
+#!/bin/sh
+
+# Selecting a pane with attach-session from an already attached client must
+# redraw pane contents when window-style and window-active-style differ.
+
+PATH=/bin:/usr/bin
+TERM=screen
+LC_ALL=C.UTF-8
+export PATH TERM LC_ALL
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+
+DIR=$(mktemp -d) || exit 1
+INNER="$TEST_TMUX -Lattach-redraw-inner-$$ -f/dev/null"
+OUTER="$TEST_TMUX -Lattach-redraw-outer-$$ -f/dev/null"
+BEFORE=$DIR/before
+AFTER=$DIR/after
+
+fail()
+{
+	echo "$*" >&2
+	exit 1
+}
+
+cleanup()
+{
+	$OUTER kill-server 2>/dev/null
+	$INNER kill-server 2>/dev/null
+	rm -rf "$DIR"
+}
+trap cleanup 0 1 15
+
+wait_for_client()
+{
+	i=0
+	while [ "$i" -lt 50 ]; do
+		CLIENT=$($INNER list-clients -F '#{client_name}' 2>/dev/null)
+		[ -n "$CLIENT" ] && return 0
+		sleep 0.1
+		i=$((i + 1))
+	done
+	fail "inner client did not attach"
+}
+
+LEFT=$($INNER new-session -dPF '#{pane_id}' -s inner -x 40 -y 8 \
+    "printf 'LEFT'; exec sleep 100") || exit 1
+$INNER set-option -g status off || exit 1
+$INNER set-option -g window-size manual || exit 1
+$INNER set-option -g default-terminal screen || exit 1
+$INNER split-window -h -t "$LEFT" "printf 'RIGHT'; exec sleep 100" || exit 1
+$INNER set-option -w -t "$LEFT" window-style bg=red || exit 1
+$INNER set-option -w -t "$LEFT" window-active-style bg=blue || exit 1
+$INNER bind-key -n x attach-session -t "$LEFT" || exit 1
+
+$OUTER new-session -d -s outer -x 40 -y 8 'sleep 100' || exit 1
+$OUTER set-option -g status off || exit 1
+$OUTER set-option -g window-size manual || exit 1
+$OUTER set-option -g default-terminal screen || exit 1
+$OUTER respawn-pane -k -t outer:0.0 \
+    "$TEST_TMUX -Lattach-redraw-inner-$$ -f/dev/null attach-session -t inner" ||
+    exit 1
+
+wait_for_client
+sleep 1
+$OUTER send-keys -t outer:0.0 x || exit 1
+sleep 1
+[ "$($INNER display-message -p -t inner '#{pane_id}')" = "$LEFT" ] ||
+    fail "attach-session did not select the target pane"
+$OUTER capture-pane -pe -t outer:0.0 >"$BEFORE" || exit 1
+
+# A forced redraw produces the correct scene. It must be identical to the
+# scene drawn immediately by attach-session.
+$INNER refresh-client -t "$CLIENT" || exit 1
+sleep 1
+$OUTER capture-pane -pe -t outer:0.0 >"$AFTER" || exit 1
+cmp -s "$BEFORE" "$AFTER" ||
+    fail "attach-session left stale active/inactive pane styles"
+
+exit 0

regress/capture-pane-time.sh

@@ -0,0 +1,38 @@
+#!/bin/sh
+
+# capture-pane -I line timestamps
+
+PATH=/bin:/usr/bin
+TERM=screen
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+TMUX="$TEST_TMUX -LtestA$$ -f/dev/null"
+TMP=$(mktemp)
+trap '$TMUX kill-server 2>/dev/null; rm -f "$TMP"' 0 1 15
+$TMUX kill-server 2>/dev/null
+
+before=$(date +%s)
+$TMUX new-session -d -x 40 -y 5 'seq 1 12; sleep 10' || exit 1
+sleep 1
+after=$(date +%s)
+
+$TMUX capture-pane -pILF -S - -E - >"$TMP" || exit 1
+awk -v before="$before" -v after="$after" '
+	$1 !~ /^-?[0-9]+$/ || $2 !~ /^[0-9]+$/ { exit 1 }
+	$4 == "1" {
+		if ($2 < before || $2 > after)
+			exit 1
+		history = 1
+	}
+	$4 == "9" {
+		if ($2 != 0)
+			exit 1
+		visible = 1
+	}
+	END { if (!history || !visible) exit 1 }
+' "$TMP" || {
+	cat "$TMP"
+	exit 1
+}
+
+exit 0

regress/check-names.sh

@@ -5,6 +5,15 @@
 PATH=/bin:/usr/bin
 TERM=screen
 
+# The pane's shell must not be the user's own interactive shell: a custom
+# PS1/PROMPT_COMMAND that sets the terminal title (as many do, for tmux/xterm
+# TERM types) would redraw over the titles this test sets and checks on
+# every prompt, regardless of how long it waits first.
+shell=
+if command -v bash >/dev/null 2>&1; then
+	shell='bash --noprofile --norc +o history'
+fi
+
 [ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
 TMUX="$TEST_TMUX -LtestA$$ -f/dev/null"
 $TMUX kill-server 2>/dev/null
@@ -30,7 +39,7 @@ must_equal()
 	[ "$got" = "$want" ] || fail "got '$got', expected '$want'"
 }
 
-$TMUX new-session -d -x 80 -y 24 || exit 1
+$TMUX new-session -d -x 80 -y 24 -- $shell || exit 1
 $TMUX set-option -qg allow-set-title on || exit 1
 $TMUX set-option -qg allow-rename on || exit 1
 $TMUX set-option -qg automatic-rename off || exit 1

regress/choose-tree.sh

@@ -290,4 +290,92 @@ wait_count ': G4' 7
 	fail "window 1 of zzz not killed"
 exit_mode q
 
+# --- help and information preview --------------------------------------------
+# The complete tree help is taller than the 24-line test terminal, where the
+# help renderer deliberately leaves the tree unchanged.
+$TMUX2 resize-window -t out:0 -x 80 -y 50 || exit 1
+i=0
+while [ "$i" -lt 50 ]; do
+	# The inner session has a one-line status, leaving a 49-line window.
+	[ "$($TMUX display-message -p -t aaa:0 '#{window_height}')" -ge 49 ] &&
+		break
+	sleep 0.2
+	i=$((i + 1))
+done
+[ "$i" -lt 50 ] || fail "attached client did not resize for tree help"
+$TMUX choose-tree -t aaa:0 -F 'G5' -O index || exit 1
+wait_count ': G5' 7
+$TMUX2 send-keys -t out:0 F1 || fail "send-keys F1 failed"
+wait_for 'Swap current and previous window'
+# The first key closes help; the second exits the tree.
+$TMUX send-keys -t aaa:0 q q || fail "send-keys help exit failed"
+wait_mode aaa:0 0
+
+$TMUX choose-tree -t aaa:0 -F 'G6' -O index || exit 1
+wait_count ': G6' 7
+$TMUX send-keys -t aaa:0 i || fail "send-keys info failed"
+wait_for 'Session'
+$TMUX send-keys -t aaa:0 i || fail "send-keys preview failed"
+exit_mode q
+
+# --- window swapping and command prompt for current/tagged items -------------
+# Restrict a window-only tree to two disposable windows in aaa. J (the
+# Shift-Down equivalent) swaps their window objects while leaving their indexes
+# in place.
+$TMUX new-window -d -t aaa: -n swap-a 'cat' || exit 1
+$TMUX new-window -d -t aaa: -n swap-b 'cat' || exit 1
+aidx=$($TMUX list-windows -t aaa -F '#{window_index}:#{window_name}' | \
+    awk -F: '$2 == "swap-a" {print $1}')
+bidx=$($TMUX list-windows -t aaa -F '#{window_index}:#{window_name}' | \
+    awk -F: '$2 == "swap-b" {print $1}')
+$TMUX choose-tree -w -t aaa:0 -O index -F 'WT #{window_name}' \
+	-f '#{m:swap-*,#{window_name}}' || exit 1
+wait_count 'WT swap-' 2
+$TMUX send-keys -t aaa:0 g j J || fail "window tree swap failed"
+i=0
+while [ "$i" -lt 50 ]; do
+	aname=$($TMUX display-message -p -t "aaa:$aidx" '#{window_name}')
+	bname=$($TMUX display-message -p -t "aaa:$bidx" '#{window_name}')
+	[ "$aname:$bname" = 'swap-b:swap-a' ] && break
+	sleep 0.2
+	i=$((i + 1))
+done
+[ "$i" -lt 50 ] || fail "window tree did not swap the two windows"
+
+# ':' runs an entered command for the current item and rebuilds the tree when
+# its queued command completes.
+$TMUX set-option -g @tree-command '' || exit 1
+$TMUX send-keys -t aaa:0 : || fail "window tree command prompt failed"
+wait_for '(current)'
+$TMUX send-keys -t aaa:0 -l "set-option -g @tree-command '%%'" || exit 1
+$TMUX send-keys -t aaa:0 Enter || exit 1
+i=0
+while [ "$i" -lt 50 ]; do
+	value=$($TMUX show-option -gqv @tree-command)
+	[ -n "$value" ] && break
+	sleep 0.2
+	i=$((i + 1))
+done
+[ "$i" -lt 50 ] || fail "window tree entered command did not run"
+case "$value" in
+=aaa:*.) ;;
+*) fail "window tree command target was '$value'" ;;
+esac
+
+# Tag both disposable windows and kill them through the tagged confirmation
+# callback. The mode-hosting window is outside the filter and survives.
+$TMUX send-keys -t aaa:0 g j t j t X || fail "tagged kill keys failed"
+wait_for 'Kill 2 tagged?'
+$TMUX send-keys -t aaa:0 y || fail "tagged kill confirmation failed"
+i=0
+while [ "$i" -lt 50 ]; do
+	left=$($TMUX list-windows -t aaa -F '#{window_name}' | \
+	    grep -c '^swap-' || true)
+	[ "$left" -eq 0 ] && break
+	sleep 0.2
+	i=$((i + 1))
+done
+[ "$i" -lt 50 ] || fail "tagged windows were not killed"
+exit_mode q
+
 exit 0

regress/clear-on-attach.sh

@@ -0,0 +1,96 @@
+#!/bin/sh
+
+# With clear-on-attach disabled tmux must preserve the terminal contents by
+# scrolling them away, rather than entering and clearing the alternate screen.
+# Capture the bytes written by a real attached client for both settings.
+
+PATH=/bin:/usr/bin
+TERM=screen
+LC_ALL=C.UTF-8
+export PATH TERM LC_ALL
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+INNER_ON="$TEST_TMUX -LtestIon$$ -f/dev/null"
+OUTER_ON="$TEST_TMUX -LtestOon$$ -f/dev/null"
+INNER_OFF="$TEST_TMUX -LtestIoff$$ -f/dev/null"
+OUTER_OFF="$TEST_TMUX -LtestOoff$$ -f/dev/null"
+DIR=$(mktemp -d) || exit 1
+
+fail()
+{
+	echo "$*" >&2
+	exit 1
+}
+
+cleanup()
+{
+	$OUTER_ON kill-server 2>/dev/null
+	$INNER_ON kill-server 2>/dev/null
+	$OUTER_OFF kill-server 2>/dev/null
+	$INNER_OFF kill-server 2>/dev/null
+	rm -rf "$DIR"
+}
+trap cleanup 0 1 15
+
+wait_for_client()
+{
+	i=0
+	while [ "$i" -lt 50 ]; do
+		$current_inner list-clients 2>/dev/null | grep -q . && return 0
+		sleep 0.1
+		i=$((i + 1))
+	done
+	fail "inner client did not attach"
+}
+
+capture_attach()
+{
+	setting=$1
+	output=$2
+	go=$DIR/go-$setting
+	if [ "$setting" = on ]; then
+		current_inner=$INNER_ON
+		current_outer=$OUTER_ON
+	else
+		current_inner=$INNER_OFF
+		current_outer=$OUTER_OFF
+	fi
+
+	$current_inner new-session -d -s inner -x40 -y10 \
+	    'exec sleep 100' || exit 1
+	$current_inner set-option -g status off || exit 1
+	$current_inner set-option -g clear-on-attach "$setting" || exit 1
+	$current_outer new-session -d -s outer -x40 -y10 \
+	    "while [ ! -e '$go' ]; do sleep 0.01; done; exec $current_inner attach-session -t inner" || exit 1
+	$current_outer set-option -g status off || exit 1
+	$current_outer pipe-pane -O "cat >'$output'" || exit 1
+	touch "$go"
+	wait_for_client
+	sleep 0.5
+	$current_outer pipe-pane -O || exit 1
+}
+
+on=$DIR/on
+off=$DIR/off
+capture_attach on "$on"
+capture_attach off "$off"
+
+smcup=$(printf '\033[?1049h')
+grep -Fq "$smcup" "$on" || fail "clear-on-attach on did not use smcup"
+if grep -Fq "$smcup" "$off"; then
+	fail "clear-on-attach off used smcup"
+fi
+
+# Some screen terminfo entries have indn (CSI Ps S), while older ones only
+# have ind (newline). The preserving path uses indn once or repeats ind once
+# for every line in the terminal plus one.
+escape=$(printf '\033')
+if ! LC_ALL=C grep -Eq "${escape}\\[[0-9]+S" "$off"; then
+	hex=$(od -An -tx1 -v "$off" | tr -d ' \n')
+	case "$hex" in
+	*0a0a0a0a0a0a0a0a0a0a0a*) ;;
+	*) fail "clear-on-attach off did not scroll the old contents away" ;;
+	esac
+fi
+
+exit 0

regress/client-key-order-focus.sh

@@ -0,0 +1,82 @@
+#!/bin/sh
+
+# send-keys -K injects a key into a client. Commands produced by that key must
+# be inserted immediately after send-keys, before later commands in the same
+# command list. Focus events arriving between a prefix and its following key
+# must be forwarded without cancelling the prefix table.
+
+PATH=/bin:/usr/bin
+TERM=screen
+LC_ALL=C.UTF-8
+export PATH TERM LC_ALL
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+INNER="$TEST_TMUX -LtestI$$ -f/dev/null"
+OUTER="$TEST_TMUX -LtestO$$ -f/dev/null"
+
+fail()
+{
+	echo "$*" >&2
+	exit 1
+}
+
+cleanup()
+{
+	$OUTER kill-server 2>/dev/null
+	$INNER kill-server 2>/dev/null
+}
+trap cleanup 0 1 15
+
+wait_for_client()
+{
+	i=0
+	while [ "$i" -lt 50 ]; do
+		client=$($INNER list-clients -F '#{client_name}' 2>/dev/null)
+		[ -n "$client" ] && return 0
+		sleep 0.1
+		i=$((i + 1))
+	done
+	fail "inner client did not attach"
+}
+
+wait_for_option()
+{
+	option=$1
+	expected=$2
+	i=0
+	while [ "$i" -lt 50 ]; do
+		actual=$($INNER show-option -gv "$option" 2>/dev/null)
+		[ "$actual" = "$expected" ] && return 0
+		sleep 0.1
+		i=$((i + 1))
+	done
+	fail "$option is '$actual', expected '$expected'"
+}
+
+cleanup
+$INNER new-session -d -s inner -x40 -y10 'exec sleep 100' || exit 1
+$INNER set-option -g status off || exit 1
+$INNER set-option -g focus-events on || exit 1
+$OUTER new-session -d -s outer -x40 -y10 "$INNER attach -t inner" || exit 1
+$OUTER set-option -g status off || exit 1
+wait_for_client
+
+# The binding generated by send-keys -K must run before the command which
+# follows send-keys in this command list. Before the queue-ordering fix this
+# produces AB rather than BA.
+$INNER set-option -g @order '' || exit 1
+$INNER bind-key -n a set-option -gF @order '#{@order}B' || exit 1
+$INNER send-keys -K -c "$client" a \; \
+	set-option -gF @order '#{@order}A' || exit 1
+wait_for_option @order BA
+
+# Put the real attached client in the prefix table, deliver FocusIn, then the
+# bound key. FocusIn is not bindable and must not reset the prefix table.
+$INNER bind-key x set-option -g @focus-prefix yes || exit 1
+$OUTER send-keys C-b || exit 1
+focus_in=$(printf '\033[I')
+$OUTER send-keys -l "$focus_in" || exit 1
+$OUTER send-keys x || exit 1
+wait_for_option @focus-prefix yes
+
+exit 0

regress/clock-mode.sh

@@ -0,0 +1,101 @@
+#!/bin/sh
+
+# Exercise clock-mode initialization, all four styles, its one-second timer,
+# resize into the compact renderer, arbitrary-key exit, and cleanup.
+
+PATH=/bin:/usr/bin
+TERM=screen
+LC_ALL=C.UTF-8
+export PATH TERM LC_ALL
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+DIR=$(mktemp -d) || exit 1
+TMUX_TMPDIR=$DIR
+export TMUX_TMPDIR
+INNER="$TEST_TMUX -LtestI$$ -f/dev/null"
+OUTER="$TEST_TMUX -LtestO$$ -f/dev/null"
+
+fail()
+{
+	echo "$*" >&2
+	exit 1
+}
+
+cleanup()
+{
+	$OUTER kill-server 2>/dev/null
+	$INNER kill-server 2>/dev/null
+	rm -rf "$DIR"
+}
+trap cleanup 0 1 15
+
+capture()
+{
+	$OUTER capture-pane -p -t outer:0.0 2>/dev/null
+}
+
+wait_mode()
+{
+	want=$1
+	i=0
+	while [ "$i" -lt 50 ]; do
+		got=$($INNER display-message -p -t clock:0 '#{pane_mode}' 2>/dev/null)
+		[ "$got" = "$want" ] && return 0
+		sleep 0.1
+		i=$((i + 1))
+	done
+	fail "pane mode is '$got', expected '$want'"
+}
+
+wait_hashes()
+{
+	i=0
+	while [ "$i" -lt 50 ]; do
+		captured=$(capture)
+		printf '%s\n' "$captured" | grep -q '#' && return 0
+		sleep 0.1
+		i=$((i + 1))
+	done
+	fail "large clock did not render"
+}
+
+$INNER new-session -d -s clock -x80 -y24 'exec sleep 100' || exit 1
+$INNER set-option -g status off || exit 1
+$INNER set-option -g window-size manual || exit 1
+$INNER set-option -w clock-mode-colour red || exit 1
+$OUTER new-session -d -s outer -x80 -y24 "$INNER attach -t clock" || exit 1
+$OUTER set-option -g status off || exit 1
+$OUTER set-option -g window-size manual || exit 1
+sleep 1
+
+for style in 12 24 12-with-seconds 24-with-seconds; do
+	$INNER set-option -w -t clock:0 clock-mode-style "$style" || exit 1
+	$INNER clock-mode -t clock:0 || exit 1
+	wait_mode clock-mode
+	wait_hashes
+	# Let at least one timer callback observe a new second.
+	[ "$style" != 12-with-seconds ] || sleep 1.2
+	$INNER send-keys -t clock:0 x || exit 1
+	wait_mode ''
+done
+
+# Resizing an active mode below the large-glyph threshold selects the compact
+# renderer. A visible time contains a colon and no block-clock hash.
+$INNER clock-mode -t clock:0 || exit 1
+wait_mode clock-mode
+$INNER resize-window -t clock:0 -x20 -y5 || exit 1
+i=0
+while [ "$i" -lt 50 ]; do
+	captured=$(capture)
+	printf '%s\n' "$captured" | grep -Eq '[0-9][0-9]?:[0-9][0-9]' && break
+	sleep 0.1
+	i=$((i + 1))
+done
+[ "$i" -lt 50 ] || fail "compact clock did not render after resize"
+printf '%s\n' "$captured" | grep -q '#' &&
+	fail "compact clock still used large glyphs"
+$INNER send-keys -t clock:0 Enter || exit 1
+wait_mode ''
+
+$INNER has-session -t clock || fail "server died during clock-mode tests"
+exit 0

regress/codepoint-widths.sh

@@ -0,0 +1,53 @@
+#!/bin/sh
+
+# Width cache ranges must include their endpoint without overflowing wchar_t.
+
+PATH=/bin:/usr/bin
+TERM=screen
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+TMUX="$TEST_TMUX -LtestA$$ -f/dev/null"
+SERVER=
+WATCHDOG=
+
+cleanup()
+{
+	if [ -n "$WATCHDOG" ]; then
+		kill "$WATCHDOG" 2>/dev/null
+		wait "$WATCHDOG" 2>/dev/null
+	fi
+	[ -n "$SERVER" ] && kill -9 "$SERVER" 2>/dev/null
+}
+trap cleanup 0
+trap 'exit 1' 1 2 15
+
+$TMUX new-session -d 'exec sleep 60' || exit 1
+SERVER=$($TMUX display-message -p '#{pid}') || exit 1
+
+# kill-server cannot stop a server stuck rebuilding the width cache.
+(
+	sleep 5
+	kill -9 "$SERVER" 2>/dev/null
+) &
+WATCHDOG=$!
+
+$TMUX set -g codepoint-widths 'U+1F600=2' || exit 1
+
+# Cover both signed and unsigned 32-bit wchar_t. Values above WCHAR_MAX
+# are ignored by the parser on platforms where they cannot be represented.
+for value in U+7FFFFFFF=1 U+7FFFFFFE-U+7FFFFFFF=2 \
+    U+FFFFFFFF=1 U+FFFFFFFE-U+FFFFFFFF=2; do
+	$TMUX set -g codepoint-widths "$value" || exit 1
+	[ "$($TMUX display-message -p alive)" = alive ] || exit 1
+done
+
+# Check that an ordinary range still includes both endpoints and stops there.
+$TMUX set -g codepoint-widths 'U+03B1-U+03B3=2' || exit 1
+$TMUX set -g @text 'αβγδ' || exit 1
+[ "$($TMUX display-message -p '#{w:@text}')" = 7 ] || exit 1
+$TMUX set -gu codepoint-widths || exit 1
+[ "$($TMUX display-message -p '#{w:@text}')" = 4 ] || exit 1
+
+$TMUX kill-server || exit 1
+SERVER=
+exit 0

regress/confirm-before-lock.sh

@@ -0,0 +1,150 @@
+#!/bin/sh
+
+# Exercise confirm-before's waiting and background callbacks, custom keys and
+# prompts, default-yes handling and errors. Also cover all three lock command
+# entry points with a harmless lock-command which leaves a marker.
+
+PATH=/bin:/usr/bin
+TERM=screen
+LC_ALL=C.UTF-8
+export PATH TERM LC_ALL
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+DIR=$(mktemp -d) || exit 1
+TMUX_TMPDIR=$DIR
+export TMUX_TMPDIR
+INNER="$TEST_TMUX -LtestI$$ -f/dev/null"
+OUTER="$TEST_TMUX -LtestO$$ -f/dev/null"
+
+fail()
+{
+	echo "$*" >&2
+	exit 1
+}
+
+cleanup()
+{
+	$OUTER kill-server 2>/dev/null
+	$INNER kill-server 2>/dev/null
+	rm -rf "$DIR"
+}
+trap cleanup 0 1 15
+
+capture()
+{
+	$OUTER capture-pane -p -t outer:0.0 2>/dev/null
+}
+
+wait_capture()
+{
+	marker=$1
+	i=0
+	while [ "$i" -lt 50 ]; do
+		captured=$(capture)
+		printf '%s\n' "$captured" | grep -Fq "$marker" && return 0
+		sleep 0.1
+		i=$((i + 1))
+	done
+	fail "timed out waiting for '$marker'"
+}
+
+wait_option()
+{
+	want=$1
+	i=0
+	while [ "$i" -lt 50 ]; do
+		got=$($INNER show-option -gqv @confirmed 2>/dev/null)
+		[ "$got" = "$want" ] && return 0
+		sleep 0.1
+		i=$((i + 1))
+	done
+	fail "@confirmed is '$got', expected '$want'"
+}
+
+wait_file()
+{
+	marker=$1
+	i=0
+	while [ "$i" -lt 50 ]; do
+		[ -f "$marker" ] && return 0
+		sleep 0.1
+		i=$((i + 1))
+	done
+	fail "lock command did not create $marker"
+}
+
+$INNER new-session -d -s test -x80 -y24 'exec sleep 100' || exit 1
+$INNER set-option -g status on || exit 1
+$INNER set-option -g status-position bottom || exit 1
+$INNER set-option -g window-size manual || exit 1
+$OUTER new-session -d -s outer -x80 -y24 "$INNER attach -t test" || exit 1
+$OUTER set-option -g status off || exit 1
+$OUTER set-option -g window-size manual || exit 1
+sleep 1
+
+client=$($INNER list-clients -F '#{client_name}')
+[ -n "$client" ] || fail "inner client did not attach"
+
+$INNER bind-key -n M-a confirm-before \
+	'set-option -g @confirmed accepted' || exit 1
+$INNER bind-key -n M-b confirm-before -b -p 'Background?' \
+	'set-option -g @confirmed background' || exit 1
+$INNER bind-key -n M-c confirm-before -c x -p 'Custom?' \
+	'set-option -g @confirmed custom' || exit 1
+$INNER bind-key -n M-y confirm-before -y -p 'Default?' \
+	'set-option -g @confirmed default' || exit 1
+
+# A non-confirming response closes the waiting prompt without running its
+# command; reopening and accepting inserts the command after the waiting item.
+$INNER set-option -g @confirmed sentinel || exit 1
+$OUTER send-keys M-a || exit 1
+wait_capture "Confirm 'set-option'? (y/n)"
+$OUTER send-keys n || exit 1
+sleep 0.2
+wait_option sentinel
+$OUTER send-keys M-a || exit 1
+wait_capture "Confirm 'set-option'? (y/n)"
+$OUTER send-keys y || exit 1
+wait_option accepted
+
+# -b has no waiting queue item and appends its command to the client queue.
+$OUTER send-keys M-b || exit 1
+wait_capture 'Background?'
+$OUTER send-keys y || exit 1
+wait_option background
+
+# A custom printable key is accepted, and -y makes Enter affirmative.
+$OUTER send-keys M-c || exit 1
+wait_capture 'Custom?'
+$OUTER send-keys x || exit 1
+wait_option custom
+$OUTER send-keys M-y || exit 1
+wait_capture 'Default?'
+$OUTER send-keys Enter || exit 1
+wait_option default
+
+# Reject invalid multi-character and control confirmation keys.
+if $INNER confirm-before -b -t "$client" -c xx 'display-message x' \
+    >/dev/null 2>&1; then
+	fail "multi-character confirm key was accepted"
+fi
+if $INNER confirm-before -b -t "$client" -c "$(printf '\001')" \
+    'display-message x' >/dev/null 2>&1; then
+	fail "control confirm key was accepted"
+fi
+
+# lock-client, lock-session and lock-server all send lock-command to the real
+# attached client. The command returns immediately and unlocks the client.
+for kind in client session server; do
+	marker="$DIR/locked-$kind"
+	$INNER set-option -t test lock-command "printf locked >$marker" || exit 1
+	case "$kind" in
+	client) $INNER lock-client -t "$client" || exit 1 ;;
+	session) $INNER lock-session -t test || exit 1 ;;
+	server) $INNER lock-server || exit 1 ;;
+	esac
+	wait_file "$marker"
+done
+
+$INNER has-session -t test || fail "server died during prompt or lock tests"
+exit 0

regress/control-client-exit-stalled.sh

@@ -17,7 +17,7 @@ PATH=/bin:/usr/bin
 TERM=screen
 
 [ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
-TMUX="$TEST_TMUX -Ltest"
+TMUX="$TEST_TMUX -Ltest$$"
 $TMUX kill-server 2>/dev/null
 
 DIR=$(mktemp -d)

regress/control-client-exit.sh

@@ -19,7 +19,7 @@ PATH=/bin:/usr/bin
 TERM=screen
 
 [ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
-TMUX="$TEST_TMUX -Ltest"
+TMUX="$TEST_TMUX -Ltest$$"
 $TMUX kill-server 2>/dev/null
 
 DIR=$(mktemp -d)

regress/control-client-new-layouts.sh

@@ -0,0 +1,123 @@
+#!/bin/sh
+
+# Check that control client flags are available in every format expansion path
+# used to produce layouts. The layout strings themselves are tested separately.
+
+PATH=/bin:/usr/bin
+TERM=screen
+LC_ALL=C.UTF-8
+LANG=C.UTF-8
+export PATH TERM LC_ALL LANG
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+TMUX="$TEST_TMUX -LtestA$$ -f/dev/null"
+
+DIR=$(mktemp -d) || exit 1
+FIFO=$DIR/input
+OUT=$DIR/output
+CFG=$DIR/flags.conf
+PID=
+
+fail()
+{
+	echo "$*" >&2
+	exit 1
+}
+
+cleanup()
+{
+	exec 3>&-
+	[ -n "$PID" ] && kill "$PID" 2>/dev/null
+	$TMUX kill-server 2>/dev/null
+	rm -rf "$DIR"
+}
+trap cleanup EXIT
+
+wait_for()
+{
+	pattern=$1
+	i=0
+
+	while [ "$i" -lt 50 ]; do
+		grep -F -- "$pattern" "$OUT" >/dev/null 2>&1 && return 0
+		if [ -n "$PID" ] && ! kill -0 "$PID" 2>/dev/null; then
+			fail "control client exited waiting for: $pattern"
+		fi
+		sleep 0.1
+		i=$((i + 1))
+	done
+	fail "missing: $pattern"
+}
+
+send()
+{
+	printf '%s\n' "$*" >&3
+}
+
+check_commands()
+{
+	name=$1
+	expected=$2
+	match='#{m:*new-layouts*,#{client_flags}}'
+
+	send "display-message -p 'DISPLAY-$name $match'"
+	wait_for "DISPLAY-$name $expected"
+	send "list-panes -F 'PANES-$name $match'"
+	wait_for "PANES-$name $expected"
+	send "list-windows -F 'WINDOWS-$name $match'"
+	wait_for "WINDOWS-$name $expected"
+	send "list-sessions -F 'SESSIONS-$name $match'"
+	wait_for "SESSIONS-$name $expected"
+	send "list-clients -F 'CLIENTS-$name $match'"
+	wait_for "CLIENTS-$name $expected"
+}
+
+check_config()
+{
+	name=$1
+	expected=$2
+
+	send "source-file '$CFG'"
+	send "display-message -p 'CONFIG-$name #{@config-new-layouts}'"
+	wait_for "CONFIG-$name $expected"
+}
+
+cat >"$CFG" <<'EOF'
+%if #{m:*new-layouts*,#{client_flags}}
+set-option -g @config-new-layouts 1
+%else
+set-option -g @config-new-layouts 0
+%endif
+EOF
+
+$TMUX kill-server 2>/dev/null
+$TMUX new-session -d -s layouts -x 80 -y 24 || exit 1
+$TMUX split-window -h -t layouts: || exit 1
+
+mkfifo "$FIFO" || exit 1
+: >"$OUT"
+$TMUX -C attach-session -t layouts <"$FIFO" >"$OUT" 2>&1 &
+PID=$!
+exec 3>"$FIFO"
+
+send 'display-message -p READY'
+wait_for READY
+
+check_commands OFF 0
+check_config OFF 0
+
+send 'refresh-client -f new-layouts'
+check_commands ON 1
+check_config ON 1
+
+send 'refresh-client -f !new-layouts'
+check_commands OFF-AGAIN 0
+check_config OFF-AGAIN 0
+
+# The list commands also run for unattached command clients. Supplying that
+# client to formats must not make the session loop dereference a NULL session.
+$TMUX list-sessions -F '#{S:all,active}' >/dev/null ||
+	fail "session loop failed for unattached command client"
+$TMUX has-session -t layouts || fail "server exited"
+
+exit 0

regress/control-client-popup.sh

@@ -0,0 +1,64 @@
+#!/bin/sh
+
+# Popups require an attached terminal and cannot be displayed by a control
+# client.
+# A popup command from control mode must be ignored cleanly, leaving the
+# client command queue and server usable.
+
+PATH=/bin:/usr/bin
+TERM=screen
+export PATH TERM
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+TMUX="$TEST_TMUX -LtestA$$ -f/dev/null"
+DIR=$(mktemp -d) || exit 1
+FIFO=$DIR/input
+OUT=$DIR/output
+RAN=$DIR/popup-ran
+
+fail()
+{
+	echo "$*" >&2
+	exit 1
+}
+
+cleanup()
+{
+	exec 3>&-
+	$TMUX kill-server 2>/dev/null
+	rm -rf "$DIR"
+}
+trap cleanup 0 1 15
+
+mkfifo "$FIFO" || exit 1
+$TMUX new-session -d -s control -x40 -y10 'exec sleep 100' || exit 1
+$TMUX -C attach-session -t control <"$FIFO" >"$OUT" 2>&1 &
+control_pid=$!
+exec 3>"$FIFO"
+
+i=0
+while [ "$i" -lt 50 ]; do
+	$TMUX list-clients -F '#{client_flags}' 2>/dev/null |
+	    grep -q 'control-mode' && break
+	sleep 0.1
+	i=$((i + 1))
+done
+[ "$i" -lt 50 ] || fail "control client did not attach"
+
+printf '%s\n' "display-popup -E 'touch $RAN'" >&3
+printf '%s\n' "display-message -p CONTROL-POPUP-ALIVE" >&3
+
+i=0
+while [ "$i" -lt 50 ]; do
+	grep -q 'CONTROL-POPUP-ALIVE' "$OUT" 2>/dev/null && break
+	if ! kill -0 "$control_pid" 2>/dev/null; then
+		fail "control client exited after display-popup"
+	fi
+	sleep 0.1
+	i=$((i + 1))
+done
+[ "$i" -lt 50 ] || fail "command after control-client popup did not run"
+$TMUX has-session -t control || fail "server exited after control-client popup"
+[ ! -e "$RAN" ] || fail "control client started a popup command"
+
+exit 0

regress/control-client-run-shell-exit.sh

@@ -0,0 +1,38 @@
+#!/bin/sh
+
+# A waited run-shell command can complete after a control client has closed its
+# input and exited. The command queue still references the client until the job
+# callback runs, but control_stop has already destroyed c->control_state. Late
+# command output must be discarded instead of dereferencing the stopped control
+# state and killing the server.
+
+PATH=/bin:/usr/bin
+TERM=screen
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+TMUX="$TEST_TMUX -Ltest$$"
+$TMUX kill-server 2>/dev/null
+
+OUT=$(mktemp)
+trap "$TMUX kill-server 2>/dev/null; rm -f $OUT" 0 1 15
+
+$TMUX -f/dev/null new-session -d -s main || exit 1
+
+printf '%s\n' 'run-shell "sleep 0.2; echo TEST"' |
+	$TMUX -f/dev/null -C >"$OUT" 2>&1
+
+sleep 1
+
+$TMUX has-session -t main 2>/dev/null || {
+	echo "server exited after late run-shell output"
+	cat "$OUT"
+	exit 1
+}
+
+grep -q '^%exit' "$OUT" || {
+	echo "control client did not exit"
+	cat "$OUT"
+	exit 1
+}
+
+exit 0

regress/control-client-sanity.sh

@@ -30,8 +30,11 @@ killw
 EOF
 sleep 1
 $TMUX has || exit 1
-$TMUX lsp -aF '#{pane_id} #{window_layout}' >$TMP || exit 1
+# Use a control client to request legacy layouts, keeping only pane lines
-cat <<EOF|cmp -s $TMP - || exit 1
+# from the control protocol output.
+$TMUX -C lsp -aF '#{pane_id} #{window_layout}' |
+	grep '^%[0-9]' >$TMP || exit 1
+cat <<EOF|cmp $TMP - || exit 1
 %0 f5ab,200x200,0,0[200x50,0,0,0,200x149,0,51,3]
 %3 f5ab,200x200,0,0[200x50,0,0,0,200x149,0,51,3]
 %2 dcbd,200x200,0,0[200x100,0,0,2,200x99,0,101,4]

regress/control-client-wait-exit.sh

@@ -10,7 +10,7 @@ PATH=/bin:/usr/bin
 TERM=screen
 
 [ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
-TMUX="$TEST_TMUX -Ltest"
+TMUX="$TEST_TMUX -Ltest$$"
 $TMUX kill-server 2>/dev/null
 
 FIFO=$(mktemp -u)

regress/copy-mode-commands.sh

@@ -0,0 +1,253 @@
+#!/bin/sh
+
+# Exercise the broad non-mouse copy-mode command surface: navigation, search,
+# jumps, state toggles, line/end-of-line copies, append, and pipe variants.
+
+PATH=/bin:/usr/bin
+TERM=screen
+LC_ALL=C.UTF-8
+export PATH TERM LC_ALL
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+DIR=$(mktemp -d) || exit 1
+TMUX_TMPDIR=$DIR
+export TMUX_TMPDIR
+TMUX="$TEST_TMUX -Ltest$$ -f/dev/null"
+
+fail()
+{
+	echo "$*" >&2
+	exit 1
+}
+
+cleanup()
+{
+	$TMUX kill-server 2>/dev/null
+	rm -rf "$DIR"
+}
+trap cleanup 0 1 15
+
+x()
+{
+	$TMUX send-keys -t copy:0 -X "$@" || fail "copy command failed: $*"
+}
+
+wait_mode()
+{
+	want=$1
+	i=0
+	while [ "$i" -lt 50 ]; do
+		got=$($TMUX display-message -p -t copy:0 '#{pane_in_mode}' 2>/dev/null)
+		[ "$got" = "$want" ] && return 0
+		sleep 0.1
+		i=$((i + 1))
+	done
+	fail "pane_in_mode is '$got', expected '$want'"
+}
+
+fresh()
+{
+	$TMUX copy-mode -t copy:0 || exit 1
+	wait_mode 1
+	x history-top
+	x start-of-line
+}
+
+select_text()
+{
+	fresh
+	x begin-selection
+	x cursor-right
+	x cursor-right
+}
+
+$TMUX new-session -d -s copy -x40 -y8 \
+    "sh -c 'i=0; while [ \$i -lt 40 ]; do printf \"  line-%02d needle (a[b]c) end\\n\" \$i; i=\$((i + 1)); done; printf \"\\nparagraph two needle\\n\\nparagraph three\\n\"; printf \"\\033]133;A\\007prompt-one\\n\\033]133;C\\007output-one\\n\\033]133;A\\007prompt-two\\n\\033]133;C\\007output-two\\n\"; exec sleep 100'" ||
+	exit 1
+$TMUX set-option -g status off || exit 1
+$TMUX set-option -g history-limit 200 || exit 1
+
+i=0
+while [ "$i" -lt 50 ]; do
+	history=$($TMUX display-message -p -t copy:0 '#{history_size}')
+	[ "$history" -ge 30 ] && break
+	sleep 0.1
+	i=$((i + 1))
+done
+[ "$i" -lt 50 ] || fail "history did not fill"
+
+fresh
+
+# Copy-mode-specific format callbacks expose the word, line, hyperlink and
+# active search match at the cursor.
+formats=$($TMUX display-message -p -t copy:0 \
+    '#{copy_cursor_word}|#{copy_cursor_line}|#{copy_cursor_hyperlink}|#{search_match}') ||
+	exit 1
+[ -n "$formats" ] || fail "copy-mode cursor formats were empty"
+
+# Cursor, viewport and paragraph commands. Each is asserted by successful
+# dispatch and the final mode-liveness check; detailed word/selection geometry
+# is covered by the existing copy-mode tests.
+for command in back-to-indentation bottom-line top-line middle-line \
+    cursor-centre-vertical cursor-centre-horizontal end-of-line history-bottom \
+    history-top halfpage-down halfpage-up page-down page-up next-paragraph \
+    previous-paragraph next-matching-bracket previous-matching-bracket; do
+	x "$command"
+done
+x goto-line 15
+x set-mark
+x cursor-down
+x jump-to-mark
+
+# OSC 133 prompt and output markers support shell-integration navigation.
+x history-top
+x next-prompt
+case "$($TMUX display-message -p -t copy:0 '#{copy_cursor_line}')" in
+*prompt-one*) ;;
+*) fail "next-prompt did not find prompt-one" ;;
+esac
+x next-prompt
+x previous-prompt
+case "$($TMUX display-message -p -t copy:0 '#{copy_cursor_line}')" in
+*prompt-one*) ;;
+*) fail "previous-prompt did not return to prompt-one" ;;
+esac
+x next-prompt -o
+case "$($TMUX display-message -p -t copy:0 '#{copy_cursor_line}')" in
+*output-one*) ;;
+*) fail "next-prompt -o did not find output-one" ;;
+esac
+
+# Character jumps remember their direction and character for repeat/reverse.
+x jump-forward e
+x jump-again
+x jump-reverse
+x jump-backward e
+x jump-to-forward e
+x jump-to-backward e
+
+# Direct, text and incremental searches cover both directions and the saved
+# search used by again/reverse.
+x search-forward needle
+x search-again
+x search-reverse
+x search-backward needle
+x search-forward-text needle
+x search-backward-text needle
+x search-forward-incremental '=needle'
+x search-forward-incremental '+needle'
+x search-backward-incremental '=needle'
+x search-backward-incremental '-needle'
+
+# Stateful display and behaviour toggles.
+for command in rectangle-on rectangle-off rectangle-toggle \
+    line-numbers-on line-numbers-off line-numbers-toggle \
+    refresh-on refresh-now refresh-off refresh-toggle \
+    scroll-exit-on scroll-exit-off scroll-exit-toggle toggle-position; do
+	x "$command"
+done
+wait_mode 1
+x cancel
+wait_mode 0
+
+# Line and end-of-line copy commands work without an explicit selection.
+fresh
+x select-line
+x copy-selection-and-cancel
+case "$($TMUX show-buffer)" in
+*line-00*) ;;
+*) fail "select-line did not select the current line" ;;
+esac
+
+fresh
+x copy-line
+[ -n "$($TMUX show-buffer)" ] || fail "copy-line produced an empty buffer"
+x cancel
+
+fresh
+x copy-end-of-line
+[ -n "$($TMUX show-buffer)" ] || fail "copy-end-of-line produced an empty buffer"
+x cancel
+
+# Append variants retain or close the mode as advertised.
+$TMUX set-buffer -b append-buffer prefix || exit 1
+select_text
+x append-selection
+appended=$($TMUX show-buffer -b append-buffer)
+case "$appended" in
+prefix*) ;;
+*) fail "append-selection produced '$appended'" ;;
+esac
+x cancel
+
+$TMUX set-buffer -b append-cancel-buffer prefix || exit 1
+select_text
+x append-selection-and-cancel
+wait_mode 0
+appended=$($TMUX show-buffer -b append-cancel-buffer)
+case "$appended" in
+prefix*) ;;
+*) fail "append-selection-and-cancel produced '$appended'" ;;
+esac
+
+# The explicit cancel variants close copy mode.
+fresh
+x copy-line-and-cancel
+wait_mode 0
+fresh
+x copy-end-of-line-and-cancel
+wait_mode 0
+select_text
+x copy-selection-and-cancel
+wait_mode 0
+
+# Pipe wrappers have distinct command handlers. /dev/null keeps the test
+# deterministic while exercising asynchronous pipe job creation and cleanup.
+fresh
+x copy-pipe-line 'cat >/dev/null'
+x cancel
+fresh
+x copy-pipe-line-and-cancel 'cat >/dev/null'
+wait_mode 0
+fresh
+x copy-pipe-end-of-line 'cat >/dev/null'
+x cancel
+fresh
+x copy-pipe-end-of-line-and-cancel 'cat >/dev/null'
+wait_mode 0
+
+select_text
+x copy-pipe-no-clear 'cat >/dev/null'
+x pipe-no-clear 'cat >/dev/null'
+x copy-pipe 'cat >/dev/null'
+x pipe 'cat >/dev/null'
+x cancel
+select_text
+x copy-pipe-and-cancel 'cat >/dev/null'
+wait_mode 0
+select_text
+x pipe-and-cancel 'cat >/dev/null'
+wait_mode 0
+
+# Commands which cancel on downward movement have separate handlers.
+fresh
+x history-bottom
+x bottom-line
+x cursor-down-and-cancel
+wait_mode 0
+fresh
+x history-bottom
+x halfpage-down-and-cancel
+wait_mode 0
+fresh
+x history-bottom
+x page-down-and-cancel
+wait_mode 0
+fresh
+x history-bottom
+x bottom-line
+x scroll-down-and-cancel
+wait_mode 0
+
+$TMUX has-session -t copy || fail "server died during copy-mode commands"
+exit 0

regress/copy-mode-selection-mode.sh

@@ -0,0 +1,81 @@
+#!/bin/sh
+
+# Changing an existing character selection to line mode must reset both ends
+# to complete lines, including when the cursor subsequently crosses the fixed
+# end. An invalid regular-expression search must also discard marks left by a
+# previous successful search.
+
+PATH=/bin:/usr/bin
+TERM=screen
+LC_ALL=C.UTF-8
+export PATH TERM LC_ALL
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+TMUX="$TEST_TMUX -LtestA$$ -f/dev/null"
+
+fail()
+{
+	echo "$*" >&2
+	exit 1
+}
+
+cleanup()
+{
+	$TMUX kill-server 2>/dev/null
+}
+trap cleanup 0 1 15
+
+$TMUX new-session -d -x30 -y6 \
+	"printf 'alpha\nbeta\ngamma\ndelta\n'; exec sleep 100" || exit 1
+$TMUX set-option -g window-size manual || exit 1
+sleep 1
+
+# A valid regular-expression search creates marks. Replacing it with an
+# invalid expression, growing the mode, and scrolling must not leave an old
+# mark array indexed with the new geometry (the original bug was an ASan heap
+# overflow in this sequence).
+$TMUX copy-mode || exit 1
+$TMUX send-keys -X history-top || exit 1
+$TMUX send-keys -X search-forward beta || exit 1
+[ "$($TMUX display-message -p '#{search_present}')" = 1 ] ||
+	fail "successful search did not create marks"
+$TMUX send-keys -X search-forward '[' || exit 1
+$TMUX resize-window -x40 -y8 || exit 1
+$TMUX send-keys -X scroll-down || exit 1
+[ "$($TMUX display-message -p '#{search_present}')" = 0 ] ||
+	fail "invalid regular expression left stale marks after resize"
+$TMUX send-keys -X cancel || exit 1
+
+# Select part of alpha through part of beta, then change the existing
+# selection to line mode. Both lines, and no partial columns, must be copied.
+$TMUX copy-mode || exit 1
+$TMUX send-keys -X history-top || exit 1
+$TMUX send-keys -N2 -X cursor-right || exit 1
+$TMUX send-keys -X begin-selection || exit 1
+$TMUX send-keys -X cursor-down || exit 1
+$TMUX send-keys -N2 -X cursor-right || exit 1
+$TMUX send-keys -X selection-mode line || exit 1
+[ "$($TMUX display-message -p '#{selection_mode}')" = line ] ||
+	fail "selection did not change to line mode"
+$TMUX send-keys -X copy-selection || exit 1
+expected=$(printf 'alpha\nbeta')
+[ "$($TMUX show-buffer)" = "$expected" ] ||
+	fail "line-mode selection did not expand to complete lines"
+
+# Start with the cursor above the fixed end so selection-mode itself takes the
+# reverse-direction path, then extend it through another line.
+$TMUX copy-mode || exit 1
+$TMUX send-keys -X history-top || exit 1
+$TMUX send-keys -N2 -X cursor-down || exit 1
+$TMUX send-keys -N2 -X cursor-right || exit 1
+$TMUX send-keys -X begin-selection || exit 1
+$TMUX send-keys -X cursor-up || exit 1
+$TMUX send-keys -N2 -X cursor-right || exit 1
+$TMUX send-keys -X selection-mode line || exit 1
+$TMUX send-keys -X cursor-up || exit 1
+$TMUX send-keys -X copy-selection || exit 1
+expected=$(printf 'alpha\nbeta\ngamma')
+[ "$($TMUX show-buffer)" = "$expected" ] ||
+	fail "reversed line-mode selection did not keep complete lines"
+
+exit 0

regress/copy-mode-source-blank.sh

@@ -0,0 +1,63 @@
+#!/bin/sh
+
+# Trimming a blank source must leave a visible line for cursor reflow.
+
+PATH=/bin:/usr/bin
+TERM=screen
+export PATH TERM
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+TMUX="$TEST_TMUX -LtestA$$ -f/dev/null"
+
+fail()
+{
+	echo "$*" >&2
+	exit 1
+}
+
+cleanup()
+{
+	$TMUX kill-server 2>/dev/null
+}
+trap cleanup 0
+trap 'exit 1' 1 2 3 15
+
+$TMUX new-session -d -x80 -y24 -s test 'sleep 100' || exit 1
+$TMUX set-option -g window-size manual || exit 1
+$TMUX new-window -t test:1 'sleep 100' || exit 1
+$TMUX resize-window -t test:0 -x20 -y24 || exit 1
+
+# Exercise widening, narrowing, and equal widths with no source history.
+for pair in '0 1' '1 0' '1 2'; do
+	set -- $pair
+	if [ "$2" = 2 ]; then
+		$TMUX new-window -t test:2 'sleep 100' || exit 1
+		$TMUX resize-window -t test:2 -x80 -y24 || exit 1
+	fi
+	source=test:$1.0
+	target=test:$2.0
+	[ "$($TMUX display-message -p -t "$source" '#{history_size}')" = 0 ] ||
+		fail "source has unexpected history"
+	$TMUX copy-mode -s "$source" -t "$target" || exit 1
+	$TMUX has-session -t test || fail "server died copying blank source"
+	[ "$($TMUX display-message -p -t "$target" \
+	    '#{pane_in_mode} #{copy_cursor_x} #{copy_cursor_y}')" = '1 0 0' ] ||
+		fail "blank source did not enter copy mode at the first cell"
+	$TMUX send-keys -t "$target" -X cancel || exit 1
+done
+
+# Real content still trims trailing empty lines, clamping the cursor to beta.
+$TMUX respawn-pane -k -t test:0.0 \
+	"printf 'alpha\r\nbeta\r\n\r\n\r\n'; exec sleep 100" || exit 1
+i=0
+while [ "$($TMUX display-message -p -t test:0.0 '#{cursor_y}')" != 4 ]; do
+	i=$((i + 1))
+	[ "$i" -lt 10 ] || fail "source output did not arrive"
+	sleep 1
+done
+$TMUX copy-mode -s test:0.0 -t test:1.0 || exit 1
+[ "$($TMUX display-message -p -t test:1.0 \
+    '#{pane_in_mode} #{copy_cursor_y} #{copy_cursor_line}')" = '1 1 beta' ] ||
+	fail "nonblank source content or trailing-line trimming changed"
+
+exit 0

regress/display-panes.sh

@@ -153,11 +153,13 @@ wait_format "$p0" '#{pane_in_mode}' '0'
 wait_option @picked "$p1"
 
 # Commands after display-panes run immediately while the mode remains.
+# Record the mode in the same command queue so client startup cannot race
+# the 500ms timeout.
 $TMUX set -g @after none || fail "set @after failed"
-$TMUX display-panes -Nd 500 -t "$p0" \; set -g @after fast ||
+$TMUX display-panes -Nd 500 -t "$p0" \; \
+    set -gF -t "$p0" @after '#{pane_mode}' ||
 	fail "display-panes immediate command failed"
-wait_option @after fast
+wait_option @after 'panes-mode'
-wait_format "$p0" '#{pane_mode}' 'panes-mode'
 wait_format "$p0" '#{pane_in_mode}' '0'
 
 # Existing zoom is restored on exit.

regress/find-window.sh

@@ -0,0 +1,118 @@
+#!/bin/sh
+
+# Exercise find-window's content, name and title filters in every combination,
+# glob/regex and case-insensitive suffixes, plus zoom restoration.
+
+PATH=/bin:/usr/bin
+TERM=screen
+LC_ALL=C.UTF-8
+export PATH TERM LC_ALL
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+DIR=$(mktemp -d) || exit 1
+TMUX_TMPDIR=$DIR
+export TMUX_TMPDIR
+INNER="$TEST_TMUX -LtestI$$ -f/dev/null"
+OUTER="$TEST_TMUX -LtestO$$ -f/dev/null"
+
+fail()
+{
+	echo "$*" >&2
+	exit 1
+}
+
+cleanup()
+{
+	$OUTER kill-server 2>/dev/null
+	$INNER kill-server 2>/dev/null
+	rm -rf "$DIR"
+}
+trap cleanup 0 1 15
+
+capture()
+{
+	$OUTER capture-pane -p -t outer:0.0 2>/dev/null
+}
+
+wait_mode()
+{
+	want=$1
+	i=0
+	while [ "$i" -lt 50 ]; do
+		got=$($INNER display-message -p -t find:base.0 '#{pane_mode}' 2>/dev/null)
+		[ "$got" = "$want" ] && return 0
+		sleep 0.1
+		i=$((i + 1))
+	done
+	fail "pane mode is '$got', expected '$want'"
+}
+
+run_find()
+{
+	label=$1
+	expected=$2
+	shift 2
+	$INNER find-window -t find:base.0 "$@" || fail "$label failed"
+	wait_mode tree-mode
+	i=0
+	while [ "$i" -lt 50 ]; do
+		captured=$(capture)
+		printf '%s\n' "$captured" | grep -Fq "$expected" && break
+		sleep 0.1
+		i=$((i + 1))
+	done
+	[ "$i" -lt 50 ] || fail "$label did not show '$expected'"
+	$INNER send-keys -t find:base.0 q || exit 1
+	wait_mode ''
+}
+
+$INNER new-session -d -s find -n base -x80 -y24 \
+	"sh -c 'printf \"BaseBody\\n\"; exec sleep 100'" || exit 1
+$INNER split-window -d -h -t find:base \
+	"sh -c 'printf \"OtherBody\\n\"; exec sleep 100'" || exit 1
+$INNER new-window -d -t find: -n NameNeedle 'exec sleep 100' || exit 1
+$INNER new-window -d -t find: -n body \
+	"sh -c 'printf \"BodyNeedle\\n\"; exec sleep 100'" || exit 1
+$INNER new-window -d -t find: -n titled 'exec sleep 100' || exit 1
+$INNER select-pane -t find:titled.0 -T TitleNeedle || exit 1
+$INNER set-option -g status off || exit 1
+$INNER set-option -g window-size manual || exit 1
+$OUTER new-session -d -s outer -x80 -y24 "$INNER attach -t find:base" || exit 1
+$OUTER set-option -g status off || exit 1
+$OUTER set-option -g window-size manual || exit 1
+sleep 1
+
+# Wait until the body text is in the pane history before searching it.
+i=0
+while [ "$i" -lt 50 ]; do
+	$INNER capture-pane -p -t find:body.0 | grep -Fq BodyNeedle && break
+	sleep 0.1
+	i=$((i + 1))
+done
+[ "$i" -lt 50 ] || fail "pane content was not ready"
+
+# No flags means C+N+T. Then cover all three pairs and all three singletons.
+run_find default NameNeedle NameNeedle
+run_find content-name NameNeedle -C -N NameNeedle
+run_find content-title titled -C -T TitleNeedle
+run_find name-title titled -N -T TitleNeedle
+run_find content-only body -C BodyNeedle
+run_find name-only NameNeedle -N NameNeedle
+run_find title-only titled -T TitleNeedle
+
+# Glob case folding and all regular-expression suffix variants.
+run_find insensitive NameNeedle -N -i nameneedle
+run_find regex NameNeedle -N -r '^NameNeedle$'
+run_find regex-insensitive NameNeedle -N -r -i '^nameneedle$'
+
+# -Z temporarily zooms the target window and restores its prior state on exit.
+$INNER find-window -Z -t find:base.0 -N NameNeedle || exit 1
+wait_mode tree-mode
+[ "$($INNER display-message -p -t find:base '#{window_zoomed_flag}')" = 1 ] ||
+	fail "find-window -Z did not zoom"
+$INNER send-keys -t find:base.0 q || exit 1
+wait_mode ''
+[ "$($INNER display-message -p -t find:base '#{window_zoomed_flag}')" = 0 ] ||
+	fail "find-window -Z did not restore zoom"
+
+exit 0

regress/floating-pane-border-style-cross-client.sh

@@ -0,0 +1,135 @@
+#!/bin/sh
+
+# Damage-only redraws must evaluate both active and inactive border styles
+# for each client, even though the cached border cells belong to the pane.
+
+PATH=/bin:/usr/bin
+TERM=screen
+LC_ALL=C.UTF-8
+export PATH TERM LC_ALL
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+
+DIR=$(mktemp -d) || exit 1
+INNER="$TEST_TMUX -Lborder-style-inner-$$ -f/dev/null"
+OUTER="$TEST_TMUX -Lborder-style-outer-$$ -f/dev/null"
+CAPTURE=$DIR/capture
+
+fail()
+{
+	echo "$*" >&2
+	exit 1
+}
+
+cleanup()
+{
+	$OUTER kill-server 2>/dev/null
+	$INNER kill-server 2>/dev/null
+	rm -rf "$DIR"
+}
+trap cleanup 0 1 15
+
+wait_for_clients()
+{
+	i=0
+	while [ "$i" -lt 50 ]; do
+		count=$($INNER list-clients 2>/dev/null | wc -l)
+		[ "$count" -eq 2 ] && return 0
+		sleep 0.1
+		i=$((i + 1))
+	done
+	fail "two inner clients did not attach"
+}
+
+wait_for_marker()
+{
+	target=$1
+	marker=$2
+	i=0
+	while [ "$i" -lt 50 ]; do
+		$OUTER capture-pane -p -t "$target" >"$CAPTURE" || exit 1
+		grep -q "$marker" "$CAPTURE" && return 0
+		sleep 0.1
+		i=$((i + 1))
+	done
+	fail "client in $target did not receive $marker"
+}
+
+cat >"$DIR/emitter.pl" <<'PERL'
+use strict;
+use warnings;
+
+$| = 1;
+for my $phase (1 .. 2) {
+	while (!-e "$ENV{TRIGGER}-$phase") {
+		select undef, undef, undef, 0.01;
+	}
+	# Change an unused palette entry and acknowledge it in the pane body.
+	print "\e]4;200;rgb:11/22/0$phase\a\e[1;1HDAMAGE$phase";
+}
+sleep 100;
+PERL
+
+$INNER new-session -d -s inner -x 60 -y 20 \
+    "TRIGGER='$DIR/trigger' perl '$DIR/emitter.pl'" || exit 1
+$INNER set -g status off || exit 1
+$INNER set -g window-size manual || exit 1
+$INNER set -g automatic-rename off || exit 1
+$INNER set -g status-interval 0 || exit 1
+$INNER set -g pane-border-lines simple || exit 1
+$INNER set -g pane-border-status top || exit 1
+$INNER set -g pane-border-format 'CLIENT=#{client_name}' || exit 1
+FLOAT=$($INNER new-pane -d -PF '#{pane_id}' -x 35 -y 6 -X 5 -Y 5 \
+    'sleep 100') || exit 1
+
+$OUTER new-session -d -s outer -x 121 -y 20 'sleep 100' || exit 1
+$OUTER set -g status off || exit 1
+$OUTER set -g window-size manual || exit 1
+$OUTER set -g default-terminal screen || exit 1
+LEFT=$($OUTER display-message -p -t outer:0.0 '#{pane_id}') || exit 1
+RIGHT=$($OUTER split-window -h -PF '#{pane_id}' 'sleep 100') || exit 1
+for target in "$LEFT" "$RIGHT"; do
+	$OUTER respawn-pane -k -t "$target" "$INNER attach-session -t inner" ||
+	    exit 1
+done
+wait_for_clients
+
+NAME1=$($OUTER display-message -p -t "$LEFT" '#{pane_tty}') || exit 1
+NAME2=$($OUTER display-message -p -t "$RIGHT" '#{pane_tty}') || exit 1
+STYLE="fg=#{?#{==:#{client_name},$NAME1},red,blue}"
+$INNER set -g pane-border-style "$STYLE" || exit 1
+$INNER set -g pane-active-border-style "$STYLE" || exit 1
+
+# Capture just the floating pane's rows, excluding the acknowledgement in
+# the tiled pane. Exercise each cache by changing the floating pane's focus.
+phase=1
+while [ "$phase" -le 2 ]; do
+	if [ "$phase" -eq 2 ]; then
+		$INNER select-pane -t "$FLOAT" || exit 1
+	fi
+	$INNER refresh-client -t "$NAME1" || exit 1
+	$INNER refresh-client -t "$NAME2" || exit 1
+	sleep 0.5
+	for target in "$LEFT" "$RIGHT"; do
+		$OUTER capture-pane -pe -S 5 -E 10 -t "$target" \
+		    >"$DIR/before-$target" || exit 1
+	done
+	RED=$(printf '\033[31m')
+	BLUE=$(printf '\033[34m')
+	grep -Fq "$RED" "$DIR/before-$LEFT" || fail "missing red border"
+	grep -Fq "$BLUE" "$DIR/before-$RIGHT" || fail "missing blue border"
+
+	: >"$DIR/trigger-$phase"
+	wait_for_marker "$LEFT" "DAMAGE$phase"
+	wait_for_marker "$RIGHT" "DAMAGE$phase"
+	sleep 0.2
+	for target in "$LEFT" "$RIGHT"; do
+		$OUTER capture-pane -pe -S 5 -E 10 -t "$target" \
+		    >"$CAPTURE" || exit 1
+		diff -u "$DIR/before-$target" "$CAPTURE" ||
+		    fail "phase $phase changed $target's border style"
+	done
+	phase=$((phase + 1))
+done
+
+exit 0

regress/floating-pane-drag-ghost.sh

@@ -0,0 +1,108 @@
+#!/bin/sh
+
+# Regression test for a floating-pane drag bug: cmd_resize_pane_redraw_floating()
+# (cmd-resize-pane.c) reported damage for just a dragged floating pane's
+# content rectangle, not the one-cell border frame drawn around it (see the
+# "floating" case in screen-redraw.c, which draws that frame at
+# xoff-1/yoff-1 through xoff+sx/yoff+sy - one cell outside the pane's own
+# content area). Damage scoped to only the content area left the frame's
+# previous position undrawn as the pane moved, so dragging it left a trail
+# of un-erased border frames behind - visible as several "corners" stacked
+# up rather than just the pane's current one.
+#
+# This bug has nothing to do with images - it reproduces with a plain
+# floating pane and no image support required.
+
+PATH=/bin:/usr/bin
+TERM=screen
+LC_ALL=C.UTF-8
+export TERM LC_ALL
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+TMUX="$TEST_TMUX -LtestA$$ -f/dev/null"
+TMUX2="$TEST_TMUX -LtestB$$ -f/dev/null"
+
+cleanup()
+{
+	$TMUX kill-server >/dev/null 2>&1
+	$TMUX2 kill-server >/dev/null 2>&1
+}
+fail()
+{
+	echo "$*" >&2
+	cleanup
+	exit 1
+}
+
+# drag STARTCOL STARTROW ENDCOL ENDROW
+#
+# Write a plain (unmodified) SGR button-1 press, drag update and release at
+# 1-based positions to the outer pane holding the inner client - this
+# matches the default MouseDown1Border/MouseDrag1Border bindings used to
+# move or resize a floating pane by its border.
+drag()
+{
+	scol="$1"
+	srow="$2"
+	ecol="$3"
+	erow="$4"
+
+	seq=$(printf '\033[<0;%s;%sM' "$scol" "$srow")
+	$TMUX2 send-keys -t "$OUTER" -l "$seq" 2>/dev/null
+	sleep 0.2
+	seq=$(printf '\033[<32;%s;%sM' "$ecol" "$erow")
+	$TMUX2 send-keys -t "$OUTER" -l "$seq" 2>/dev/null
+	sleep 0.2
+	seq=$(printf '\033[<0;%s;%sm' "$ecol" "$erow")
+	$TMUX2 send-keys -t "$OUTER" -l "$seq" 2>/dev/null
+	sleep 1
+}
+
+cleanup
+
+TMP=$(mktemp)
+trap "cleanup; rm -f $TMP" 0 1 15
+
+$TMUX new-session -d -s inner -x 60 -y 20 'sh -c "sleep 100"' || exit 1
+$TMUX set -g mouse on
+$TMUX set -g default-command 'sh -c "sleep 100"'
+
+FLOAT=$($TMUX new-pane -d -PF '#{pane_id}' -x 16 -y 5 -X 5 -Y 5) ||
+	fail "new-pane -X -Y failed"
+FTOP=$($TMUX display-message -p -t "$FLOAT" '#{pane_top}')
+FLEFT=$($TMUX display-message -p -t "$FLOAT" '#{pane_left}')
+FWIDTH=$($TMUX display-message -p -t "$FLOAT" '#{pane_width}')
+
+$TMUX2 new-session -d -x 60 -y 20 "$TMUX attach -t inner" || exit 1
+sleep 1
+OUTER=$($TMUX2 list-panes -F '#{pane_id}' | head -1)
+[ -n "$OUTER" ] || fail "No outer pane."
+
+# Sanity check: exactly one floating pane, so exactly one top-left corner,
+# before dragging anything.
+$TMUX2 capturep -p -t "$OUTER" >$TMP || fail "capture failed"
+n=$(grep -o '┌' $TMP | wc -l)
+[ "$n" -eq 1 ] || fail "sanity: expected 1 corner before drag, found $n"
+
+# Drag the floating pane by its top border (row FTOP-1, some column within
+# its width) down several rows in a few separate steps, then release. A
+# single drag() call already does press/motion/release, so call it several
+# times in a row to simulate a multi-step real drag.
+GRABCOL=$((FLEFT + FWIDTH / 2))
+STARTROW=$FTOP
+i=0
+while [ $i -lt 6 ]; do
+	newrow=$((STARTROW + i + 1))
+	drag $((GRABCOL + 1)) $((STARTROW + i)) $((GRABCOL + 1)) $newrow
+	i=$((i + 1))
+done
+
+$TMUX2 capturep -p -t "$OUTER" >$TMP || fail "capture failed"
+
+# Exactly one top-left corner should remain - the pane's current position.
+# This is expected to fail before the fix: multiple corners (a trail of
+# un-erased frames) would remain from the intermediate drag positions.
+n=$(grep -o '┌' $TMP | wc -l)
+[ "$n" -eq 1 ] || fail "expected exactly 1 corner after drag, found $n (ghost frames left behind)"
+
+exit 0

regress/floating-pane-drag-no-double-composite.sh

@@ -0,0 +1,88 @@
+#!/bin/sh
+
+# Each drag motion must draw the floating pane content once.
+
+PATH=/bin:/usr/bin
+TERM=screen
+LC_ALL=C.UTF-8
+export PATH TERM LC_ALL
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+
+DIR=$(mktemp -d) || exit 1
+cd "$DIR" || exit 1
+INNER="$TEST_TMUX -Ldoublecomp-inner-$$ -f/dev/null"
+OUTER="$TEST_TMUX -Ldoublecomp-outer-$$ -f/dev/null"
+
+fail()
+{
+	echo "$*" >&2
+	exit 1
+}
+
+cleanup()
+{
+	$OUTER kill-server 2>/dev/null
+	$INNER kill-server 2>/dev/null
+	cd /
+	rm -rf "$DIR"
+}
+trap cleanup 0 1 15
+
+mouse()
+{
+	sequence=$(printf '\033[<%s;%s;%s%s' "$1" "$2" "$3" "$4")
+	$OUTER send-keys -t outer:0.0 -l "$sequence" || exit 1
+	sleep 0.15
+}
+
+$INNER new-session -d -s inner -x 40 -y 15 "printf '\\033[15;1HOUTSIDE'; exec sleep 100" || exit 1
+$INNER set-option -g status off || exit 1
+$INNER set-option -g window-size manual || exit 1
+$INNER set-option -g mouse on || exit 1
+$INNER set-option -g status-interval 0 || exit 1
+$INNER set-option -g automatic-rename off || exit 1
+FLOAT=$($INNER new-pane -d -PF '#{pane_id}' -x 15 -y 5 -X 5 -Y 2 \
+    "printf 'DRAGMARK'; exec sleep 100") || exit 1
+
+$OUTER new-session -d -s outer -x 40 -y 15 'sleep 100' || exit 1
+$OUTER set-option -g status off || exit 1
+$OUTER set-option -g window-size manual || exit 1
+$OUTER set-option -g default-terminal screen-256color || exit 1
+$OUTER respawn-pane -k -t outer:0.0 \
+    "$TEST_TMUX -Ldoublecomp-inner-$$ -f/dev/null attach-session -t inner" ||
+    exit 1
+sleep 0.5
+
+XOFF=$($INNER display-message -p -t "$FLOAT" '#{pane_left}')
+YOFF=$($INNER display-message -p -t "$FLOAT" '#{pane_top}')
+GRABCOL=$((XOFF + 3))
+BORDERROW=$YOFF
+
+# Begin capture after focus changes from the initial mouse press have settled.
+mouse 0 "$GRABCOL" "$BORDERROW" M
+$OUTER pipe-pane -O -t outer:0.0 "cat >'$DIR/output'" || exit 1
+$INNER refresh-client || exit 1
+sleep 0.5
+grep -aq DRAGMARK "$DIR/output" || fail "capture missed floating pane content"
+grep -aq OUTSIDE "$DIR/output" || fail "capture missed untouched row"
+offset=$(wc -c <"$DIR/output")
+
+i=0
+steps=6
+while [ "$i" -lt "$steps" ]; do
+	GRABCOL=$((GRABCOL + 1))
+	mouse 32 "$GRABCOL" "$BORDERROW" M
+	i=$((i + 1))
+done
+mouse 0 "$GRABCOL" "$BORDERROW" m
+sleep 0.3
+
+NEWXOFF=$($INNER display-message -p -t "$FLOAT" '#{pane_left}')
+[ "$NEWXOFF" -eq "$((XOFF + steps))" ] || fail "floating pane did not move six columns"
+tail -c +"$((offset + 1))" "$DIR/output" >"$DIR/drag-output"
+n=$(perl -0777 -ne '$n = () = /DRAGMARK/g; print "$n\n"' "$DIR/drag-output")
+[ "$n" -eq "$steps" ] ||
+	fail "$steps drag motions wrote the floating pane content $n times"
+
+exit 0

regress/floating-pane-drag-scrollbar-strip.sh

@@ -0,0 +1,159 @@
+#!/bin/sh
+
+# Regression test: dragging a floating pane across another pane's ordinary
+# content must not redraw that other pane's scrollbar, unless the drag
+# actually crosses the scrollbar's own strip.
+#
+# cmd_resize_pane_redraw_floating() (cmd-resize-pane.c) used to flag
+# PANE_REDRAWSCROLLBAR on any pane whose whole *body* intersected the
+# floating pane's old or new rectangle, rather than just its narrow
+# scrollbar strip - so dragging a floating pane back and forth over an
+# ordinary tiled pane's content (never touching its scrollbar) still
+# needlessly redrew that pane's scrollbar on every motion step. See
+# tmux-image-redraw-known-bugs.md for the full write-up.
+#
+# This is checked by giving the non-dragged pane a distinctive scrollbar
+# colour and counting how many times its SGR code appears in the client's
+# raw output while the floating pane is dragged vertically over that pane's
+# body, well clear of its scrollbar column: with the fix, it should never
+# reappear after the initial draw.
+
+PATH=/bin:/usr/bin
+TERM=screen
+LC_ALL=C.UTF-8
+export TERM LC_ALL
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+TMUX="$TEST_TMUX -LtestA$$ -f/dev/null"
+TMUX2="$TEST_TMUX -LtestB$$ -f/dev/null"
+
+cleanup()
+{
+	$TMUX kill-server >/dev/null 2>&1
+	$TMUX2 kill-server >/dev/null 2>&1
+}
+fail()
+{
+	echo "$*" >&2
+	cleanup
+	exit 1
+}
+
+# drag STARTCOL STARTROW ENDCOL ENDROW
+drag()
+{
+	scol="$1"
+	srow="$2"
+	ecol="$3"
+	erow="$4"
+
+	seq=$(printf '\033[<0;%s;%sM' "$scol" "$srow")
+	$TMUX2 send-keys -t "$OUTER" -l "$seq" 2>/dev/null
+	sleep 0.2
+	seq=$(printf '\033[<32;%s;%sM' "$ecol" "$erow")
+	$TMUX2 send-keys -t "$OUTER" -l "$seq" 2>/dev/null
+	sleep 0.2
+	seq=$(printf '\033[<0;%s;%sm' "$ecol" "$erow")
+	$TMUX2 send-keys -t "$OUTER" -l "$seq" 2>/dev/null
+	sleep 0.5
+}
+
+cleanup
+
+TMP=$(mktemp)
+trap "cleanup; rm -f $TMP" 0 1 15
+
+$TMUX new-session -d -s inner -x 60 -y 20 'sh -c "sleep 100"' || exit 1
+$TMUX set -g mouse on || fail "set mouse failed"
+$TMUX set -g default-command 'sh -c "sleep 100"' || fail "set default-command failed"
+$TMUX set -g pane-scrollbars on || fail "set pane-scrollbars failed"
+
+$TMUX split-window -h -t inner 'sh -c "sleep 100"' || fail "split-window failed"
+
+PANES=$($TMUX list-panes -t inner -F '#{pane_id} #{pane_left}')
+LEFT=$(echo "$PANES" | sort -k2 -n | head -1 | cut -d' ' -f1)
+[ -n "$LEFT" ] || fail "could not identify left pane"
+
+# A distinctive scrollbar colour for the non-dragged (left) pane only.
+$TMUX set -p -t "$LEFT" pane-scrollbars-style 'fg=colour201,bg=colour17' ||
+	fail "set pane-scrollbars-style failed"
+
+ALEFT=$($TMUX display-message -p -t "$LEFT" '#{pane_left}')
+ATOP=$($TMUX display-message -p -t "$LEFT" '#{pane_top}')
+AWIDTH=$($TMUX display-message -p -t "$LEFT" '#{pane_width}')
+AHEIGHT=$($TMUX display-message -p -t "$LEFT" '#{pane_height}')
+[ "$AWIDTH" -gt 15 ] || fail "left pane too narrow for this test ($AWIDTH)"
+
+# A small floating pane placed well inside the left pane's content area,
+# clear of its (right-hand) scrollbar column by several columns.
+FLOAT=$($TMUX new-pane -d -PF '#{pane_id}' -x 8 -y 5 \
+    -X $((ALEFT + 2)) -Y $((ATOP + 2))) || fail "new-pane -X -Y failed"
+FTOP=$($TMUX display-message -p -t "$FLOAT" '#{pane_top}')
+FLEFT=$($TMUX display-message -p -t "$FLOAT" '#{pane_left}')
+FWIDTH=$($TMUX display-message -p -t "$FLOAT" '#{pane_width}')
+[ $((FLEFT + FWIDTH + 3)) -lt $((ALEFT + AWIDTH)) ] ||
+	fail "sanity: floating pane too close to the scrollbar column"
+
+# Start the outer session with a plain shell, then start capturing before
+# triggering the attach - starting the attach as the outer pane's initial
+# command would mean pipe-pane only starts after the attach-driven initial
+# redraw (which draws the scrollbars) has already happened, missing it.
+$TMUX2 new-session -d -x 60 -y 20 || exit 1
+OUTER=$($TMUX2 list-panes -F '#{pane_id}' | head -1)
+[ -n "$OUTER" ] || fail "No outer pane."
+$TMUX2 pipe-pane -t "$OUTER" -O "cat >$TMP" || fail "pipe-pane failed"
+$TMUX2 send-keys -t "$OUTER" -l "$TMUX attach -t inner" || fail "send attach failed"
+$TMUX2 send-keys -t "$OUTER" Enter || fail "send enter failed"
+sleep 1
+
+# Sanity check: the distinctive scrollbar colour reaches the client at all.
+grep -qa '48;5;201' $TMP || fail "sanity: scrollbar colour never reached the client"
+: >$TMP
+
+# Drag the floating pane straight up and down by its top border, staying at
+# a fixed column the whole time - this never crosses the left pane's
+# scrollbar strip, only its ordinary content.
+GRABCOL=$((FLEFT + FWIDTH / 2))
+row=$FTOP
+i=0
+while [ $i -lt 6 ]; do
+	newrow=$((row + 1))
+	drag $GRABCOL $row $GRABCOL $newrow
+	row=$newrow
+	i=$((i + 1))
+done
+i=0
+while [ $i -lt 6 ]; do
+	newrow=$((row - 1))
+	drag $GRABCOL $row $GRABCOL $newrow
+	row=$newrow
+	i=$((i + 1))
+done
+
+# The scrollbar colour should never reappear - its geometry never changed,
+# and the drag never crossed its column. This is expected to fail before
+# the fix - see the header comment.
+n=$(grep -ac '48;5;201' $TMP)
+[ "$n" -eq 0 ] ||
+	fail "left pane's scrollbar was redrawn $n times while dragging over its body only"
+
+# Cross the scrollbar and return, comparing each damaged redraw with a full
+# refresh to check that covering and uncovering its cells leaves no artifacts.
+offset=$((ALEFT + AWIDTH - FLEFT - FWIDTH / 2))
+for delta in "$offset" "$((-offset))"; do
+	oldleft=$($TMUX display-message -p -t "$FLOAT" '#{pane_left}')
+	newcol=$((GRABCOL + delta))
+	drag "$GRABCOL" "$row" "$newcol" "$row"
+	GRABCOL=$newcol
+	newleft=$($TMUX display-message -p -t "$FLOAT" '#{pane_left}')
+	[ "$newleft" -eq "$((oldleft + delta))" ] ||
+		fail "floating pane did not move across the scrollbar as expected"
+	before=$($TMUX2 capture-pane -pe -t "$OUTER" -S 0 -E "$((AHEIGHT - 1))")
+	$TMUX refresh-client || fail "refresh-client failed"
+	sleep 0.5
+	after=$($TMUX2 capture-pane -pe -t "$OUTER" -S 0 -E "$((AHEIGHT - 1))")
+	[ "$before" = "$after" ] ||
+		fail "scrollbar crossing differs from a full redraw"
+done
+
+exit 0

regress/floating-pane-drag-sync-no-self-defer.sh

@@ -0,0 +1,93 @@
+#!/bin/sh
+
+# Synchronized drag output must not cause a full redraw of untouched rows.
+
+PATH=/bin:/usr/bin
+TERM=screen
+LC_ALL=C.UTF-8
+export PATH TERM LC_ALL
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+
+DIR=$(mktemp -d) || exit 1
+cd "$DIR" || exit 1
+INNER="$TEST_TMUX -Lsyncdefer-inner-$$ -f/dev/null"
+OUTER="$TEST_TMUX -Lsyncdefer-outer-$$ -f/dev/null"
+
+fail()
+{
+	echo "$*" >&2
+	exit 1
+}
+
+cleanup()
+{
+	$OUTER kill-server 2>/dev/null
+	$INNER kill-server 2>/dev/null
+	cd /
+	rm -rf "$DIR"
+}
+trap cleanup 0 1 15
+
+mouse()
+{
+	sequence=$(printf '\033[<%s;%s;%s%s' "$1" "$2" "$3" "$4")
+	$OUTER send-keys -t outer:0.0 -l "$sequence" || exit 1
+	sleep 0.15
+}
+
+$INNER new-session -d -s inner -x 40 -y 15 "printf '\\033[15;1HOUTSIDE'; exec sleep 100" || exit 1
+$INNER set-option -g status off || exit 1
+$INNER set-option -g window-size manual || exit 1
+$INNER set-option -g mouse on || exit 1
+$INNER set-option -g status-interval 0 || exit 1
+$INNER set-option -g automatic-rename off || exit 1
+FLOAT=$($INNER new-pane -d -PF '#{pane_id}' -x 15 -y 5 -X 5 -Y 2 \
+    "printf 'DRAGMARK'; exec sleep 100") || exit 1
+
+$OUTER new-session -d -s outer -x 40 -y 15 'sleep 100' || exit 1
+$OUTER set-option -g status off || exit 1
+$OUTER set-option -g window-size manual || exit 1
+$OUTER set-option -g default-terminal screen-256color || exit 1
+$INNER set-option -as terminal-features ',screen-256color:sync' || exit 1
+$OUTER respawn-pane -k -t outer:0.0 \
+    "$TEST_TMUX -Lsyncdefer-inner-$$ -f/dev/null attach-session -t inner" ||
+    exit 1
+sleep 0.5
+
+XOFF=$($INNER display-message -p -t "$FLOAT" '#{pane_left}')
+YOFF=$($INNER display-message -p -t "$FLOAT" '#{pane_top}')
+GRABCOL=$((XOFF + 3))
+BORDERROW=$YOFF
+
+# Begin capture after focus changes from the initial mouse press have settled.
+mouse 0 "$GRABCOL" "$BORDERROW" M
+$OUTER pipe-pane -O -t outer:0.0 "cat >'$DIR/output'" || exit 1
+$INNER refresh-client || exit 1
+sleep 0.5
+grep -aq DRAGMARK "$DIR/output" || fail "capture missed floating pane content"
+grep -aq OUTSIDE "$DIR/output" || fail "capture missed untouched row"
+offset=$(wc -c <"$DIR/output")
+
+i=0
+steps=6
+while [ "$i" -lt "$steps" ]; do
+	GRABCOL=$((GRABCOL + 1))
+	mouse 32 "$GRABCOL" "$BORDERROW" M
+	i=$((i + 1))
+done
+mouse 0 "$GRABCOL" "$BORDERROW" m
+sleep 0.3
+
+NEWXOFF=$($INNER display-message -p -t "$FLOAT" '#{pane_left}')
+[ "$NEWXOFF" -eq "$((XOFF + steps))" ] || fail "floating pane did not move six columns"
+tail -c +"$((offset + 1))" "$DIR/output" >"$DIR/drag-output"
+n=$(perl -0777 -ne '$n = () = /DRAGMARK/g; print "$n\n"' "$DIR/drag-output")
+[ "$n" -ge "$steps" ] || fail "drag output did not reach the client"
+perl -0777 -ne 'exit(/\e\[\?2026h/ ? 0 : 1)' "$DIR/drag-output" ||
+    fail "drag did not use synchronized output"
+if grep -aq OUTSIDE "$DIR/drag-output"; then
+	fail "synchronized drag redrew an untouched row"
+fi
+
+exit 0

regress/floating-pane-drag-wide-character-right.sh

@@ -0,0 +1,206 @@
+#!/bin/sh
+
+# Mirror of floating-pane-drag-wide-character.sh for the *right* edge of a
+# damage rectangle. redraw_damage_grow_span_clip() (screen-redraw.c) widens
+# a damage rectangle's right edge by one cell whenever it isn't already at
+# the span's own edge, to pull in a wide character's base half when the
+# edge lands on its padding half - but it did this unconditionally, with no
+# check of which half it was actually touching. When the edge instead
+# already lands cleanly on a fresh character's base cell (a character fully
+# outside the range), growing right pulls in just that base cell -
+# tty_draw_line() sees it can't fit that character's full width in the
+# remaining range (tty_draw_line_get_empty()'s gc->data.width > nx check)
+# and clears it, exactly as the left-edge bug cleared a neighbouring
+# character's padding half.
+#
+# As with the left-edge test, the exact column parity needs to be
+# deterministic to actually catch it. This constructs it by creating the
+# floating pane, checking its real position, and recreating it one column
+# over if necessary until the vacated rectangle's right edge lands on a
+# base cell.
+
+PATH=/bin:/usr/bin
+TERM=screen
+LC_ALL=C.UTF-8
+export PATH TERM LC_ALL
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+
+DIR=$(mktemp -d) || exit 1
+INNER="$TEST_TMUX -Lwidecharr-inner-$$ -f/dev/null"
+OUTER="$TEST_TMUX -Lwidecharr-outer-$$ -f/dev/null"
+EMITTER=$DIR/emitter.pl
+BASE=$DIR/base
+CAPTURE=$DIR/capture
+FLOAT=
+PANEWIDTH=12
+
+fail()
+{
+	echo "$*" >&2
+	[ -s "$CAPTURE" ] && cat "$CAPTURE" >&2
+	exit 1
+}
+
+cleanup()
+{
+	$OUTER kill-server 2>/dev/null
+	$INNER kill-server 2>/dev/null
+	rm -rf "$DIR"
+}
+trap cleanup 0 1 15
+
+wait_for_client()
+{
+	i=0
+	while [ "$i" -lt 50 ]; do
+		CLIENT=$($INNER list-clients -F '#{client_name}' 2>/dev/null)
+		[ -n "$CLIENT" ] && return 0
+		sleep 0.1
+		i=$((i + 1))
+	done
+	fail "inner client did not attach"
+}
+
+wait_outer_has()
+{
+	marker=$1
+	i=0
+	while [ "$i" -lt 50 ]; do
+		$OUTER capture-pane -p -t outer:0.0 >"$CAPTURE" 2>/dev/null || true
+		grep -q "$marker" "$CAPTURE" && return 0
+		sleep 0.1
+		i=$((i + 1))
+	done
+	fail "outer client did not show $marker"
+}
+
+slice_columns()
+{
+	# Extract terminal columns [COL1, COL2) from lines [ROW1, ROW2] of
+	# $1, decoding UTF-8 - the pane's own new position (well clear of
+	# this range) must not affect the comparison, so this only looks at
+	# the narrow strip actually vacated, not the whole line. capture-pane
+	# text has one decoded character per double-width cell pair (every
+	# character here is width 2), so terminal columns are converted to
+	# character indices by halving before slicing.
+	perl -CSD -e '
+		my ($row1, $row2, $col1, $col2, $file) = @ARGV;
+		open my $fh, "<:encoding(UTF-8)", $file or die $!;
+		my @lines = <$fh>;
+		my $c1 = int($col1 / 2);
+		my $c2 = int(($col2 + 1) / 2);
+		for my $n ($row1 .. $row2) {
+			my $line = $lines[$n - 1];
+			$line =~ s/\R\z//;
+			print substr($line, $c1, $c2 - $c1), "\n";
+		}
+	' "$ROW1" "$ROW2" "$COL1" "$COL2" "$1"
+}
+
+wait_old_rows_restored()
+{
+	i=0
+	while [ "$i" -lt 50 ]; do
+		$OUTER capture-pane -p -t outer:0.0 >"$CAPTURE" 2>/dev/null || true
+		slice_columns "$BASE" >"$DIR/want"
+		slice_columns "$CAPTURE" >"$DIR/got"
+		cmp -s "$DIR/want" "$DIR/got" && return 0
+		sleep 0.1
+		i=$((i + 1))
+	done
+	fail "wide characters under the floating pane's vacated right edge were not restored"
+}
+
+mouse()
+{
+	sequence=$(printf '\033[<%s;%s;%s%s' "$1" "$2" "$3" "$4")
+	$OUTER send-keys -t outer:0.0 -l "$sequence" || exit 1
+	sleep 0.1
+}
+
+cat >"$EMITTER" <<'PERL'
+use strict;
+use warnings;
+
+binmode STDOUT, ':encoding(UTF-8)';
+$| = 1;
+for my $row (1 .. 10) {
+	print "\e[$row;1H", chr(0x754c) x 20;
+}
+sleep 100;
+PERL
+
+$INNER new-session -d -s inner -x 40 -y 10 "perl '$EMITTER'" || exit 1
+$INNER set-option -g status off || exit 1
+$INNER set-option -g window-size manual || exit 1
+$INNER set-option -g mouse on || exit 1
+$INNER set-option -g pane-scrollbars off || exit 1
+
+$OUTER new-session -d -s outer -x 40 -y 10 'sleep 100' || exit 1
+$OUTER set-option -g status off || exit 1
+$OUTER set-option -g window-size manual || exit 1
+$OUTER set-option -g default-terminal screen-256color || exit 1
+$OUTER respawn-pane -k -t outer:0.0 \
+    "$TEST_TMUX -Lwidecharr-inner-$$ -f/dev/null attach-session -t inner" ||
+    exit 1
+
+wait_for_client
+wait_outer_has '界界界'
+$OUTER capture-pane -p -t outer:0.0 >"$BASE" || exit 1
+
+# Create the floating pane, then check its actual resulting position. Try
+# adjacent starting columns until the vacated rectangle's right edge
+# (xoff + PANEWIDTH + 1, the border-grown exclusive end - see
+# window_pane_damage_floating(), window.c) lands on an even (base-cell)
+# column.
+startx=5
+tries=0
+while [ "$tries" -lt 2 ]; do
+	[ -n "$FLOAT" ] && $INNER kill-pane -t "$FLOAT" 2>/dev/null
+	FLOAT=$($INNER new-pane -d -PF '#{pane_id}' -x "$PANEWIDTH" -y 3 \
+	    -X "$startx" -Y 5 \
+	    'sh -c "printf FLOATMARK; exec sleep 100"') || exit 1
+	sleep 0.2
+	XOFF=$($INNER display-message -p -t "$FLOAT" '#{pane_left}')
+	YOFF=$($INNER display-message -p -t "$FLOAT" '#{pane_top}')
+	oldright=$((XOFF + PANEWIDTH + 1))
+	if [ $((oldright % 2)) -eq 0 ]; then
+		break
+	fi
+	startx=$((startx + 1))
+	tries=$((tries + 1))
+done
+[ $(((XOFF + PANEWIDTH + 1) % 2)) -eq 0 ] ||
+	fail "could not find bad-parity starting column"
+
+wait_outer_has FLOATMARK
+
+ROW1=$((YOFF + 1))
+ROW2=$((YOFF + 3))
+COL1=$((XOFF + PANEWIDTH - 2))
+COL2=$((XOFF + PANEWIDTH + 2))
+
+# Grab the pane's top border a couple of columns in (avoiding the corner
+# cells) and drag it well clear of its old rectangle - far enough right
+# that its new position starts past the checked columns above (which sit
+# just past the pane's *original* right edge).
+GRABCOL=$((XOFF + 3))
+BORDERROW=$((YOFF))
+
+seq=$(printf '\033[<0;%s;%sM' "$GRABCOL" "$BORDERROW")
+$OUTER send-keys -t outer:0.0 -l "$seq" || exit 1
+sleep 0.1
+seq=$(printf '\033[<32;%s;%sM' "$((GRABCOL + 20))" "$BORDERROW")
+$OUTER send-keys -t outer:0.0 -l "$seq" || exit 1
+sleep 0.1
+seq=$(printf '\033[<0;%s;%sm' "$((GRABCOL + 20))" "$BORDERROW")
+$OUTER send-keys -t outer:0.0 -l "$seq" || exit 1
+sleep 0.1
+
+NEWXOFF=$($INNER display-message -p -t "$FLOAT" '#{pane_left}')
+[ "$NEWXOFF" != "$XOFF" ] || fail "sanity: floating pane did not move (still at $XOFF)"
+
+wait_old_rows_restored
+
+exit 0

regress/floating-pane-drag-wide-character.sh

@@ -0,0 +1,200 @@
+#!/bin/sh
+
+# Damage at a floating pane's vacated edge must always redraw a complete
+# grid character. redraw_damage_grow_span_clip() (screen-redraw.c) widens a
+# damage rectangle's left edge by one cell whenever it isn't already at the
+# span's own edge, to pull in a wide character's base half when the edge
+# lands on its padding half - but it did this unconditionally, with no
+# check of which half it was actually touching. When the edge instead
+# already lands cleanly on a fresh character's base cell, growing left
+# walks into the *previous*, unrelated character's padding cell and blanks
+# it (tty_draw_line() treats any leading padding cell as proof its own
+# range starts mid-character).
+#
+# This is a general damage-composition bug, not specific to any one kind of
+# pane, but the exact column parity needs to be deterministic to actually
+# catch it (a lucky parity draws fine). This constructs it by creating the
+# floating pane, checking its real position (the border-framing offset
+# added to -X is not something to hand-compute), and recreating it one
+# column over if necessary until the vacated rectangle's left edge lands on
+# a base cell.
+
+PATH=/bin:/usr/bin
+TERM=screen
+LC_ALL=C.UTF-8
+export PATH TERM LC_ALL
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+
+DIR=$(mktemp -d) || exit 1
+INNER="$TEST_TMUX -Lwidechar-inner-$$ -f/dev/null"
+OUTER="$TEST_TMUX -Lwidechar-outer-$$ -f/dev/null"
+EMITTER=$DIR/emitter.pl
+BASE=$DIR/base
+CAPTURE=$DIR/capture
+FLOAT=
+
+fail()
+{
+	echo "$*" >&2
+	[ -s "$CAPTURE" ] && cat "$CAPTURE" >&2
+	exit 1
+}
+
+cleanup()
+{
+	$OUTER kill-server 2>/dev/null
+	$INNER kill-server 2>/dev/null
+	rm -rf "$DIR"
+}
+trap cleanup 0 1 15
+
+wait_for_client()
+{
+	i=0
+	while [ "$i" -lt 50 ]; do
+		CLIENT=$($INNER list-clients -F '#{client_name}' 2>/dev/null)
+		[ -n "$CLIENT" ] && return 0
+		sleep 0.1
+		i=$((i + 1))
+	done
+	fail "inner client did not attach"
+}
+
+wait_outer_has()
+{
+	marker=$1
+	i=0
+	while [ "$i" -lt 50 ]; do
+		$OUTER capture-pane -p -t outer:0.0 >"$CAPTURE" 2>/dev/null || true
+		grep -q "$marker" "$CAPTURE" && return 0
+		sleep 0.1
+		i=$((i + 1))
+	done
+	fail "outer client did not show $marker"
+}
+
+slice_columns()
+{
+	# Extract terminal columns [COL1, COL2) from lines [ROW1, ROW2] of
+	# $1, decoding UTF-8 - the pane's own new position (well clear of
+	# this range) must not affect the comparison, so this only looks at
+	# the narrow strip actually vacated, not the whole line. capture-pane
+	# text has one decoded character per double-width cell pair (every
+	# character here is width 2), so terminal columns are converted to
+	# character indices by halving before slicing.
+	perl -CSD -e '
+		my ($row1, $row2, $col1, $col2, $file) = @ARGV;
+		open my $fh, "<:encoding(UTF-8)", $file or die $!;
+		my @lines = <$fh>;
+		my $c1 = int($col1 / 2);
+		my $c2 = int(($col2 + 1) / 2);
+		for my $n ($row1 .. $row2) {
+			my $line = $lines[$n - 1];
+			$line =~ s/\R\z//;
+			print substr($line, $c1, $c2 - $c1), "\n";
+		}
+	' "$ROW1" "$ROW2" "$COL1" "$COL2" "$1"
+}
+
+wait_old_rows_restored()
+{
+	i=0
+	while [ "$i" -lt 50 ]; do
+		$OUTER capture-pane -p -t outer:0.0 >"$CAPTURE" 2>/dev/null || true
+		slice_columns "$BASE" >"$DIR/want"
+		slice_columns "$CAPTURE" >"$DIR/got"
+		cmp -s "$DIR/want" "$DIR/got" && return 0
+		sleep 0.1
+		i=$((i + 1))
+	done
+	fail "wide characters under the floating pane's vacated edge were not restored"
+}
+
+mouse()
+{
+	sequence=$(printf '\033[<%s;%s;%s%s' "$1" "$2" "$3" "$4")
+	$OUTER send-keys -t outer:0.0 -l "$sequence" || exit 1
+	sleep 0.1
+}
+
+cat >"$EMITTER" <<'PERL'
+use strict;
+use warnings;
+
+binmode STDOUT, ':encoding(UTF-8)';
+$| = 1;
+for my $row (1 .. 10) {
+	print "\e[$row;1H", chr(0x754c) x 20;
+}
+sleep 100;
+PERL
+
+$INNER new-session -d -s inner -x 40 -y 10 "perl '$EMITTER'" || exit 1
+$INNER set-option -g status off || exit 1
+$INNER set-option -g window-size manual || exit 1
+$INNER set-option -g mouse on || exit 1
+$INNER set-option -g pane-scrollbars off || exit 1
+
+$OUTER new-session -d -s outer -x 40 -y 10 'sleep 100' || exit 1
+$OUTER set-option -g status off || exit 1
+$OUTER set-option -g window-size manual || exit 1
+$OUTER set-option -g default-terminal screen-256color || exit 1
+$OUTER respawn-pane -k -t outer:0.0 \
+    "$TEST_TMUX -Lwidechar-inner-$$ -f/dev/null attach-session -t inner" ||
+    exit 1
+
+wait_for_client
+wait_outer_has '界界界'
+$OUTER capture-pane -p -t outer:0.0 >"$BASE" || exit 1
+
+# Create the floating pane, then check its actual resulting position. Try
+# adjacent starting columns until the vacated rectangle's left edge
+# (xoff - 1) lands on an even (base-cell) column - the odd case is the one
+# every earlier manual test happened to land on by chance.
+startx=5
+tries=0
+while [ "$tries" -lt 2 ]; do
+	[ -n "$FLOAT" ] && $INNER kill-pane -t "$FLOAT" 2>/dev/null
+	FLOAT=$($INNER new-pane -d -PF '#{pane_id}' -x 12 -y 3 -X "$startx" \
+	    -Y 5 'sh -c "printf FLOATMARK; exec sleep 100"') || exit 1
+	sleep 0.2
+	XOFF=$($INNER display-message -p -t "$FLOAT" '#{pane_left}')
+	YOFF=$($INNER display-message -p -t "$FLOAT" '#{pane_top}')
+	oldleft=$((XOFF - 1))
+	if [ $((oldleft % 2)) -eq 0 ]; then
+		break
+	fi
+	startx=$((startx + 1))
+	tries=$((tries + 1))
+done
+[ $(((XOFF - 1) % 2)) -eq 0 ] || fail "could not find bad-parity starting column"
+
+wait_outer_has FLOATMARK
+
+ROW1=$((YOFF + 1))
+ROW2=$((YOFF + 3))
+COL1=$((XOFF - 4))
+COL2=$((XOFF + 4))
+
+# Grab the pane's top border a couple of columns in (avoiding the corner
+# cells) and drag it well clear of its old rectangle.
+GRABCOL=$((XOFF + 3))
+BORDERROW=$((YOFF))
+
+seq=$(printf '\033[<0;%s;%sM' "$GRABCOL" "$BORDERROW")
+$OUTER send-keys -t outer:0.0 -l "$seq" || exit 1
+sleep 0.1
+seq=$(printf '\033[<32;%s;%sM' "$((GRABCOL + 15))" "$BORDERROW")
+$OUTER send-keys -t outer:0.0 -l "$seq" || exit 1
+sleep 0.1
+seq=$(printf '\033[<0;%s;%sm' "$((GRABCOL + 15))" "$BORDERROW")
+$OUTER send-keys -t outer:0.0 -l "$seq" || exit 1
+sleep 0.1
+
+NEWXOFF=$($INNER display-message -p -t "$FLOAT" '#{pane_left}')
+[ "$NEWXOFF" != "$XOFF" ] || fail "sanity: floating pane did not move (still at $XOFF)"
+
+wait_old_rows_restored
+
+exit 0

regress/floating-pane-geometry.sh

@@ -268,5 +268,149 @@ $TMUX kill-pane -t "$floating" || exit 1
 $TMUX kill-pane -t "$right" || exit 1
 $TMUX kill-pane -t "$lower" || exit 1
 
+# --- Floating panes clamped when the window shrinks (issue #5581, PR #5582) ---
+#
+# layout_resize clamps floating panes back inside the window when it shrinks:
+# move them and, only if they cannot fit, shrink them (never below
+# PANE_MINIMUM). A floating cell is the pane's content, so with the default
+# single-line border the clamp counts 1 cell of border per side, exactly as
+# layout_floating_args_parse does on creation; with no border it counts 0.
+# Each case below gets its own window, since resize-window fixes a window at
+# a manual size for the rest of its life.
+
+# Case 1: a lone floating pane -- break-pane -W on a window's only pane --
+# takes the early-return path in layout_resize, added during PR #5582's
+# review round, since there is no tiled tree to walk.
+win=$($TMUX new-window -dPF '#{window_id}') ||
+	fail "new-window for lone float failed"
+
+# -x 20 -y 6 -> pane 18x4; -X 60 -Y 18 -> pane_left 61, pane_top 19: with the
+# border, the footprint is columns 60-79, rows 18-23, flush with the 80x24
+# window's right and bottom edges, so the float fits before it is shrunk.
+$TMUX break-pane -W -s "$win" -x 20 -y 6 -X 60 -Y 18 ||
+	fail "break-pane -W for lone float failed"
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_width}')"  18
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_height}')" 4
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_left}')"   61
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_top}')"    19
+
+# Shrink to 40x16. The float still fits at its own size (18 <= 40-2, 4 <=
+# 16-2) so only its position moves, flush to the new right/bottom edges:
+# xoff = 40 - 18 - 1 = 21; yoff = 16 - 4 - 1 = 11.
+$TMUX resize-window -t "$win" -x 40 -y 16 ||
+	fail "resize-window (lone float) failed"
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_width}')"  18
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_height}')" 4
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_left}')"   21
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_top}')"    11
+
+# Case 5: grow the window back. The clamp must not chase the window back
+# outward -- it only ever pulls a float in, never restores where it was.
+$TMUX resize-window -t "$win" -x 80 -y 24 ||
+	fail "resize-window grow (lone float) failed"
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_width}')"  18
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_height}')" 4
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_left}')"   21
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_top}')"    11
+$TMUX kill-window -t "$win" || exit 1
+
+# Case 2: the same float, but with a tiled sibling surviving alongside it, so
+# the window's root cell stays tiled and layout_resize takes the normal path
+# (the clamp call after layout_fix_offsets) instead of the early return
+# above. Same geometry as case 1, so the same numbers should come out.
+win=$($TMUX new-window -dPF '#{window_id}') ||
+	fail "new-window for tiled sibling failed"
+$TMUX split-window -t "$win" 'sleep 100' ||
+	fail "split-window for tiled sibling failed"
+$TMUX break-pane -W -s "$win" -x 20 -y 6 -X 60 -Y 18 ||
+	fail "break-pane -W for tiled sibling failed"
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_width}')"  18
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_height}')" 4
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_left}')"   61
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_top}')"    19
+
+$TMUX resize-window -t "$win" -x 40 -y 16 ||
+	fail "resize-window (tiled sibling) failed"
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_width}')"  18
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_height}')" 4
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_left}')"   21
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_top}')"    11
+$TMUX kill-window -t "$win" || exit 1
+
+# Case 3: new-pane float, the original repro from issue #5581 and the PR
+# body -- also the normal path, via the tiled base pane new-window creates.
+win=$($TMUX new-window -dPF '#{window_id}') ||
+	fail "new-window for new-pane repro failed"
+$TMUX resize-window -t "$win" -x 120 -y 40 ||
+	fail "resize-window to 120x40 failed"
+
+# -x 30 -y 10 -> pane 28x8; -X 85 -Y 25 -> pane_left 86, pane_top 26.
+floating=$($TMUX new-pane -t "$win" -dPF '#{pane_id}' \
+	-x 30 -y 10 -X 85 -Y 25 'sleep 100') ||
+	fail "new-pane for new-pane repro failed"
+must_equal "$($TMUX display-message -p -t "$floating" '#{pane_width}')"  28
+must_equal "$($TMUX display-message -p -t "$floating" '#{pane_height}')" 8
+must_equal "$($TMUX display-message -p -t "$floating" '#{pane_left}')"   86
+must_equal "$($TMUX display-message -p -t "$floating" '#{pane_top}')"    26
+
+# Shrink to 60x20: xoff = 60 - 28 - 1 = 31; yoff = 20 - 8 - 1 = 11.
+$TMUX resize-window -t "$win" -x 60 -y 20 ||
+	fail "resize-window (new-pane repro) failed"
+must_equal "$($TMUX display-message -p -t "$floating" '#{pane_width}')"  28
+must_equal "$($TMUX display-message -p -t "$floating" '#{pane_height}')" 8
+must_equal "$($TMUX display-message -p -t "$floating" '#{pane_left}')"   31
+must_equal "$($TMUX display-message -p -t "$floating" '#{pane_top}')"    11
+$TMUX kill-window -t "$win" || exit 1
+
+# Case 4: a float that already fits inside the shrunk window is left alone --
+# assert position and size are both unchanged, not just one of them.
+win=$($TMUX new-window -dPF '#{window_id}') ||
+	fail "new-window for untouched float failed"
+
+# -x 20 -y 6 -> pane 18x4; -X 8 -Y 3 -> pane_left 9, pane_top 4 (as at the top
+# of this file). Footprint columns 8-27, rows 3-8: well inside 60x20 too.
+floating=$($TMUX new-pane -t "$win" -dPF '#{pane_id}' \
+	-x 20 -y 6 -X 8 -Y 3 'sleep 100') ||
+	fail "new-pane for untouched float failed"
+must_equal "$($TMUX display-message -p -t "$floating" '#{pane_width}')"  18
+must_equal "$($TMUX display-message -p -t "$floating" '#{pane_height}')" 4
+must_equal "$($TMUX display-message -p -t "$floating" '#{pane_left}')"   9
+must_equal "$($TMUX display-message -p -t "$floating" '#{pane_top}')"    4
+
+$TMUX resize-window -t "$win" -x 60 -y 20 ||
+	fail "resize-window (untouched float) failed"
+must_equal "$($TMUX display-message -p -t "$floating" '#{pane_width}')"  18
+must_equal "$($TMUX display-message -p -t "$floating" '#{pane_height}')" 4
+must_equal "$($TMUX display-message -p -t "$floating" '#{pane_left}')"   9
+must_equal "$($TMUX display-message -p -t "$floating" '#{pane_top}')"    4
+$TMUX kill-window -t "$win" || exit 1
+
+# Case 6: pad = 0, via the pane-border-lines window option set to none. The
+# border arithmetic differs here (no -2/+1 adjustment either on creation or
+# in the clamp).
+win=$($TMUX new-window -dPF '#{window_id}') ||
+	fail "new-window for pad=0 float failed"
+$TMUX set-option -w -t "$win" pane-border-lines none ||
+	fail "set pane-border-lines none failed"
+
+# No border: -x 20 -y 6 -> pane 20x6 directly; -X 60 -Y 18 -> pane_left 60,
+# pane_top 18 directly. Footprint (== content, no border) is columns 60-79,
+# rows 18-23: flush right/bottom of the 80x24 window, same as case 1.
+$TMUX break-pane -W -s "$win" -x 20 -y 6 -X 60 -Y 18 ||
+	fail "break-pane -W for pad=0 float failed"
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_width}')"  20
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_height}')" 6
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_left}')"   60
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_top}')"    18
+
+# Shrink to 40x16 with pad=0: xoff = 40 - 20 - 0 = 20; yoff = 16 - 6 - 0 = 10.
+$TMUX resize-window -t "$win" -x 40 -y 16 ||
+	fail "resize-window (pad=0 float) failed"
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_width}')"  20
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_height}')" 6
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_left}')"   20
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_top}')"    10
+$TMUX kill-window -t "$win" || exit 1
+
 $TMUX kill-server 2>/dev/null
 exit 0

regress/floating-pane-offscreen-alternate-redraw.sh

@@ -0,0 +1,102 @@
+#!/bin/sh
+
+# Returning from the alternate screen must redraw the visible part of a
+# floating pane clipped at the left edge, the top edge, or both.
+
+PATH=/bin:/usr/bin
+TERM=screen
+LC_ALL=C.UTF-8
+export PATH TERM LC_ALL
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+
+DIR=$(mktemp -d) || exit 1
+INNER="$TEST_TMUX -Loffscreen-inner-$$ -f/dev/null"
+OUTER="$TEST_TMUX -Loffscreen-outer-$$ -f/dev/null"
+EMITTER=$DIR/emitter.pl
+CAPTURE=$DIR/capture
+
+fail()
+{
+	echo "$*" >&2
+	[ -s "$CAPTURE" ] && cat "$CAPTURE" >&2
+	exit 1
+}
+
+cleanup()
+{
+	$OUTER kill-server 2>/dev/null
+	$INNER kill-server 2>/dev/null
+	rm -rf "$DIR"
+}
+trap cleanup 0 1 15
+
+wait_outer_has()
+{
+	marker=$1
+	i=0
+	while [ "$i" -lt 50 ]; do
+		$OUTER capture-pane -p -t outer:0.0 >"$CAPTURE" 2>/dev/null || true
+		grep -q "$marker" "$CAPTURE" && return 0
+		sleep 0.1
+		i=$((i + 1))
+	done
+	fail "outer client did not show $marker"
+}
+
+cat >"$EMITTER" <<'PERL'
+use strict;
+use warnings;
+
+$| = 1;
+for my $row (1 .. 5) {
+	print "\e[$row;1H", 'A' x 15;
+}
+while (!-e "$ENV{TRIGGER}-alternate") {
+	select undef, undef, undef, 0.01;
+}
+print "\e[?1049h";
+for my $row (1 .. 5) {
+	print "\e[$row;1H", 'B' x 15;
+}
+while (!-e "$ENV{TRIGGER}-restore") {
+	select undef, undef, undef, 0.01;
+}
+print "\e[?1049l";
+sleep 100;
+PERL
+
+$INNER new-session -d -s inner -x 40 -y 10 'sleep 100' || exit 1
+$INNER set-option -g status off || exit 1
+$INNER set-option -g window-size manual || exit 1
+
+$OUTER new-session -d -s outer -x 40 -y 10 'sleep 100' || exit 1
+$OUTER set-option -g status off || exit 1
+$OUTER set-option -g window-size manual || exit 1
+$OUTER set-option -g default-terminal screen-256color || exit 1
+$OUTER respawn-pane -k -t outer:0.0 \
+    "$TEST_TMUX -Loffscreen-inner-$$ -f/dev/null attach-session -t inner" ||
+    exit 1
+
+for position in left top both; do
+	case "$position" in
+	left) x=-5; y=2 ;;
+	top) x=5; y=-2 ;;
+	both) x=-5; y=-2 ;;
+	esac
+	FLOAT=$($INNER new-pane -d -PF '#{pane_id}' -x 15 -y 5 -X "$x" -Y "$y" \
+	    "TRIGGER='$DIR/$position' perl '$EMITTER'") || exit 1
+	[ "$($INNER display-message -p -t "$FLOAT" '#{pane_left},#{pane_top}')" = "$((x + 1)),$((y + 1))" ] ||
+	    fail "$position: floating pane has unexpected position"
+	wait_outer_has AAAAA
+	cp "$CAPTURE" "$DIR/primary"
+	: >"$DIR/$position-alternate"
+	wait_outer_has BBBBB
+	: >"$DIR/$position-restore"
+	wait_outer_has AAAAA
+	cmp -s "$DIR/primary" "$CAPTURE" ||
+	    fail "$position: primary screen was not completely restored"
+	$INNER kill-pane -t "$FLOAT" || exit 1
+done
+
+exit 0

regress/floating-pane-prompt-wide-character.sh

@@ -0,0 +1,179 @@
+#!/bin/sh
+
+# A damage rectangle's clip range is grown to avoid splitting a wide
+# character, but redraw_damage_grow_span_clip() (screen-redraw.c) only ever
+# checks the span's own pane *content* grid (wp->screen) for that. For a
+# REDRAW_SPAN_PANE span, that same range is then also handed to
+# redraw_damage_draw_pane_prompt() to recompose the pane's separately
+# rendered prompt (wp->prompt, e.g. from "command-prompt -P") over the
+# damaged sub-range - but the prompt is drawn into its own, freshly
+# allocated one-line screen, unrelated to the pane's content grid, so a
+# range grown (or left ungrown) against the content is not necessarily
+# grown correctly for the prompt's own wide characters.
+#
+# This is invisible when the pane's own content is plain ASCII (as here):
+# redraw_damage_grow_span_clip() never finds anything to grow against, so
+# the raw, ungrown geometric range is passed straight through to the
+# prompt - and if that range's edge lands mid-character in the *prompt's*
+# grid, tty_draw_line() clears the character it cuts through
+# (tty_draw_line_get_empty()'s gc->data.width > nx check, for a trailing
+# base cell with no room left for its padding half).
+#
+# The trigger is a palette change (OSC 4) in a tiled pane that is one half
+# of a vertical split running the full height of the window - occluded
+# under the floating pane, but still geometrically triggering a redraw of
+# its own rectangle. Positioned so the split boundary falls inside the
+# floating pane's own CJK prompt, this reproduces exactly Codex's report:
+# "a floating pane containing a CJK prompt across a tiled-pane boundary -
+# a palette update in the tiled pane blanks a prompt character."
+
+PATH=/bin:/usr/bin
+TERM=screen
+LC_ALL=C.UTF-8
+export PATH TERM LC_ALL
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+
+DIR=$(mktemp -d) || exit 1
+cd "$DIR" || exit 1
+INNER="$TEST_TMUX -Lpromptwide-inner-$$ -f/dev/null"
+OUTER="$TEST_TMUX -Lpromptwide-outer-$$ -f/dev/null"
+EMITTER=$DIR/emitter.pl
+CAPTURE=$DIR/capture
+FLOAT=
+
+fail()
+{
+	echo "$*" >&2
+	[ -s "$CAPTURE" ] && cat "$CAPTURE" >&2
+	exit 1
+}
+
+cleanup()
+{
+	$OUTER kill-server 2>/dev/null
+	$INNER kill-server 2>/dev/null
+	cd /
+	rm -rf "$DIR"
+}
+trap cleanup 0 1 15
+
+wait_for_client()
+{
+	i=0
+	while [ "$i" -lt 50 ]; do
+		CLIENT=$($INNER list-clients -F '#{client_name}' 2>/dev/null)
+		[ -n "$CLIENT" ] && return 0
+		sleep 0.1
+		i=$((i + 1))
+	done
+	fail "inner client did not attach"
+}
+
+wait_outer_has()
+{
+	marker=$1
+	i=0
+	while [ "$i" -lt 50 ]; do
+		$OUTER capture-pane -p -t outer:0.0 >"$CAPTURE" 2>/dev/null || true
+		grep -q "$marker" "$CAPTURE" && return 0
+		sleep 0.1
+		i=$((i + 1))
+	done
+	fail "outer client did not show $marker"
+}
+
+wait_prompt_row_intact()
+{
+	i=0
+	while [ "$i" -lt 50 ]; do
+		$OUTER capture-pane -p -t outer:0.0 >"$CAPTURE" 2>/dev/null || true
+		line=$(sed -n "${PROMPTROW}p" "$CAPTURE")
+		case $line in
+		*"$PROMPTTEXT"*) return 0 ;;
+		esac
+		sleep 0.1
+		i=$((i + 1))
+	done
+	fail "the CJK prompt was not intact after the palette-triggered damage - got: $line"
+}
+
+cat >"$EMITTER" <<'PERL'
+use strict;
+use warnings;
+
+$| = 1;
+my $line = <STDIN>;
+print "\e]4;1;rgb:11/22/33\e\\";
+sleep 100;
+PERL
+
+$INNER new-session -d -s inner -x 60 -y 12 "perl '$EMITTER'" || exit 1
+$INNER set-option -g status off || exit 1
+$INNER set-option -g window-size manual || exit 1
+LEFT=$($INNER list-panes -t inner -F '#{pane_id}') || exit 1
+
+# Split so the boundary between the two tiled panes falls at column 17 -
+# used below to pick a floating-pane column that lands the boundary
+# mid-character inside the prompt.
+RIGHT=$($INNER split-window -t inner -h -l 43 -PF '#{pane_id}' \
+    'sleep 100') || exit 1
+RX=$($INNER display-message -p -t "$RIGHT" '#{pane_left}') || exit 1
+
+# Create the floating pane, then check its actual resulting position (the
+# border-framing offset added to -X is not something to hand-compute). Try
+# adjacent starting columns until the split boundary lands on an odd
+# (padding-half) column of the prompt's own numbering, and within the
+# prompt's 12-column width.
+startx=10
+tries=0
+while [ "$tries" -lt 4 ]; do
+	[ -n "$FLOAT" ] && $INNER kill-pane -t "$FLOAT" 2>/dev/null
+	FLOAT=$($INNER new-pane -d -PF '#{pane_id}' -x 24 -y 5 -X "$startx" \
+	    -Y 2 "sh -c 'i=0; while [ \$i -lt 10 ]; do \
+printf AAAAAAAAAAAAAAAAAAAAAA\\\\n; i=\$((i+1)); done; sleep 100'") ||
+	    exit 1
+	sleep 0.2
+	X1=$($INNER display-message -p -t "$FLOAT" '#{pane_left}')
+	Y1=$($INNER display-message -p -t "$FLOAT" '#{pane_top}')
+	H1=$($INNER display-message -p -t "$FLOAT" '#{pane_height}')
+	local=$((RX - X1 - 1))
+	if [ "$local" -ge 1 ] && [ "$local" -le 11 ] &&
+	    [ $((local % 2)) -eq 1 ]; then
+		break
+	fi
+	startx=$((startx + 1))
+	tries=$((tries + 1))
+done
+local=$((RX - X1 - 1))
+[ "$local" -ge 1 ] && [ "$local" -le 11 ] && [ $((local % 2)) -eq 1 ] ||
+	fail "could not find bad-parity starting column"
+
+$OUTER new-session -d -s outer -x 60 -y 12 'sleep 100' || exit 1
+$OUTER set-option -g status off || exit 1
+$OUTER set-option -g window-size manual || exit 1
+$OUTER set-option -g default-terminal screen-256color || exit 1
+$OUTER respawn-pane -k -t outer:0.0 \
+    "$TEST_TMUX -Lpromptwide-inner-$$ -f/dev/null attach-session -t inner" ||
+    exit 1
+
+wait_for_client
+wait_outer_has AAAAAAAAAAAAAAAAAAAAAA
+CLIENT=$($INNER list-clients -F '#{client_name}') || exit 1
+
+$INNER select-pane -t "$FLOAT" || exit 1
+PROMPTTEXT=$(printf '\344\270\255' | perl -CSD -ne 'print $_ x 6')
+$INNER command-prompt -b -P -t "$CLIENT" -p "$PROMPTTEXT" \
+    'display-message -- %1' || exit 1
+wait_outer_has "$PROMPTTEXT"
+
+PROMPTROW=$((Y1 + H1))
+
+# Trigger the damage: unblock the emitter so it fires the palette change in
+# the left tiled pane, which is occluded under (but geometrically overlaps)
+# the floating pane's prompt row.
+$INNER send-keys -t "$LEFT" Enter || exit 1
+
+wait_prompt_row_intact
+
+exit 0

regress/floating-pane-status-cross-client.sh

@@ -0,0 +1,151 @@
+#!/bin/sh
+
+# Damage redraws must show each client's own pane status, even though the
+# cached status screen is shared between clients.
+
+PATH=/bin:/usr/bin
+TERM=screen
+LC_ALL=C.UTF-8
+export PATH TERM LC_ALL
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+
+DIR=$(mktemp -d) || exit 1
+INNER="$TEST_TMUX -Lstatuscc-inner-$$ -f/dev/null"
+OUTER="$TEST_TMUX -Lstatuscc-outer-$$ -f/dev/null"
+CAPTURE=$DIR/capture
+
+fail()
+{
+	echo "$*" >&2
+	[ -s "$CAPTURE" ] && cat "$CAPTURE" >&2
+	exit 1
+}
+
+cleanup()
+{
+	$OUTER kill-server 2>/dev/null
+	$INNER kill-server 2>/dev/null
+	rm -rf "$DIR"
+}
+trap cleanup 0 1 15
+
+wait_for_clients()
+{
+	i=0
+	while [ "$i" -lt 50 ]; do
+		count=$($INNER list-clients 2>/dev/null | wc -l)
+		[ "$count" -eq 2 ] && return 0
+		sleep 0.1
+		i=$((i + 1))
+	done
+	fail "two inner clients did not attach"
+}
+
+wait_for_marker()
+{
+	target=$1
+	marker=$2
+	i=0
+	while [ "$i" -lt 50 ]; do
+		$OUTER capture-pane -p -t "$target" >"$CAPTURE" || exit 1
+		grep -q "$marker" "$CAPTURE" && return 0
+		sleep 0.1
+		i=$((i + 1))
+	done
+	fail "client in $target did not receive $marker"
+}
+
+cat >"$DIR/emitter.pl" <<'PERL'
+use strict;
+use warnings;
+
+$| = 1;
+for my $phase (1 .. 4) {
+	while (!-e "$ENV{TRIGGER}-$phase") {
+		select undef, undef, undef, 0.01;
+	}
+	# Change an unused palette entry and acknowledge it in the pane body.
+	print "\e]4;200;rgb:11/22/0$phase\a\e[1;1HDAMAGE$phase";
+}
+sleep 100;
+PERL
+
+$INNER new-session -d -s inner -x 60 -y 20 \
+    "TRIGGER='$DIR/trigger' perl '$DIR/emitter.pl'" || exit 1
+$INNER set -g status off || exit 1
+$INNER set -g window-size manual || exit 1
+$INNER set -g automatic-rename off || exit 1
+$INNER set -g status-interval 0 || exit 1
+$INNER set -g pane-border-lines simple || exit 1
+$INNER set -g pane-border-status top || exit 1
+$INNER set -g pane-border-format 'CLIENT=<#{client_name}>' || exit 1
+FLOAT=$($INNER new-pane -d -PF '#{pane_id}' -x 35 -y 6 -X 5 -Y 5 \
+    'sleep 100') || exit 1
+
+$OUTER new-session -d -s outer -x 121 -y 20 'sleep 100' || exit 1
+$OUTER set -g status off || exit 1
+$OUTER set -g window-size manual || exit 1
+$OUTER set -g default-terminal screen || exit 1
+LEFT=$($OUTER display-message -p -t outer:0.0 '#{pane_id}') || exit 1
+RIGHT=$($OUTER split-window -h -PF '#{pane_id}' 'sleep 100') || exit 1
+for target in "$LEFT" "$RIGHT"; do
+	$OUTER respawn-pane -k -t "$target" "$INNER attach-session -t inner" ||
+	    exit 1
+done
+wait_for_clients
+
+NAME1=$($OUTER display-message -p -t "$LEFT" '#{pane_tty}') || exit 1
+NAME2=$($OUTER display-message -p -t "$RIGHT" '#{pane_tty}') || exit 1
+
+# Disable periodic status updates above and trigger damage without a command
+# that also requests a status redraw. Each client must keep its own title.
+$INNER refresh-client -t "$NAME1" || exit 1
+$INNER refresh-client -t "$NAME2" || exit 1
+sleep 0.5
+for phase in 0 1 2; do
+	if [ "$phase" -ne 0 ]; then
+		: >"$DIR/trigger-$phase"
+		wait_for_marker "$LEFT" "DAMAGE$phase"
+		wait_for_marker "$RIGHT" "DAMAGE$phase"
+		sleep 0.2
+	fi
+	for target in "$LEFT" "$RIGHT"; do
+		if [ "$target" = "$LEFT" ]; then
+			name=$NAME1
+			other=$NAME2
+		else
+			name=$NAME2
+			other=$NAME1
+		fi
+		$OUTER capture-pane -p -S 5 -E 10 -t "$target" \
+		    >"$CAPTURE" || exit 1
+		grep -Fq "CLIENT=<$name>" "$CAPTURE" ||
+		    fail "phase $phase: missing $name's pane status"
+		if grep -Fq "CLIENT=<$other>" "$CAPTURE"; then
+			fail "phase $phase: $name received $other's pane status"
+		fi
+	done
+done
+
+# Leave just one client so a cache keyed only by client would remain stale.
+$OUTER respawn-pane -k -t "$RIGHT" 'sleep 100' || exit 1
+i=0
+while [ "$($INNER list-clients | wc -l)" -ne 1 ]; do
+	[ "$i" -lt 50 ] || fail "second client did not detach"
+	sleep 0.1
+	i=$((i + 1))
+done
+$INNER set-environment -g TEST_STATUS_VALUE initial || exit 1
+$INNER set -g pane-border-format 'VALUE=#{TEST_STATUS_VALUE}' || exit 1
+$INNER refresh-client -t "$NAME1" || exit 1
+wait_for_marker "$LEFT" VALUE=initial
+for phase in 3 4; do
+	# Changing the environment does not itself request a status redraw.
+	$INNER set-environment -g TEST_STATUS_VALUE "phase$phase" || exit 1
+	: >"$DIR/trigger-$phase"
+	wait_for_marker "$LEFT" "DAMAGE$phase"
+	wait_for_marker "$LEFT" "VALUE=phase$phase"
+done
+
+exit 0

regress/floating-pane-status-format.sh

@@ -0,0 +1,102 @@
+#!/bin/sh
+
+# Resizing a floating pane must refresh session status formats which depend on
+# its geometry, not only the pane scene and borders.
+
+PATH=/bin:/usr/bin
+TERM=screen
+LC_ALL=C.UTF-8
+export PATH TERM LC_ALL
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+
+DIR=$(mktemp -d) || exit 1
+INNER="$TEST_TMUX -Lfloating-status-inner-$$ -f/dev/null"
+OUTER="$TEST_TMUX -Lfloating-status-outer-$$ -f/dev/null"
+CAPTURE=$DIR/capture
+
+fail()
+{
+	echo "$*" >&2
+	[ -s "$CAPTURE" ] && cat "$CAPTURE" >&2
+	exit 1
+}
+
+cleanup()
+{
+	$OUTER kill-server 2>/dev/null
+	$INNER kill-server 2>/dev/null
+	rm -rf "$DIR"
+}
+trap cleanup 0 1 15
+
+wait_for_client()
+{
+	i=0
+	while [ "$i" -lt 50 ]; do
+		CLIENT=$($INNER list-clients -F '#{client_name}' 2>/dev/null)
+		[ -n "$CLIENT" ] && return 0
+		sleep 0.1
+		i=$((i + 1))
+	done
+	fail "inner client did not attach"
+}
+
+wait_outer_has_status()
+{
+	marker=$1
+	i=0
+	while [ "$i" -lt 50 ]; do
+		$OUTER capture-pane -p -t outer:0.0 >"$CAPTURE" 2>/dev/null || true
+		tail -1 "$CAPTURE" | grep -q "$marker" && return 0
+		sleep 0.1
+		i=$((i + 1))
+	done
+	fail "outer client status did not show $marker"
+}
+
+mouse()
+{
+	sequence=$(printf '\033[<%s;%s;%s%s' "$1" "$2" "$3" "$4")
+	$OUTER send-keys -t outer:0.0 -l "$sequence" || exit 1
+	sleep 0.1
+}
+
+$INNER new-session -d -s inner -x 50 -y 12 'sleep 100' || exit 1
+FLOAT=$($INNER new-pane -PF '#{pane_id}' -x 10 -y 5 -X 5 -Y 3 \
+    'sleep 100') || fail "could not create floating pane"
+$INNER set-option -g window-size manual || exit 1
+$INNER set-option -g mouse on || exit 1
+$INNER set-option -g status on || exit 1
+$INNER set-option -g status-position bottom || exit 1
+$INNER set-option -g status-left 'WIDTH=#{pane_width}' || exit 1
+$INNER set-option -g status-right '' || exit 1
+$INNER set-option -g status-interval 0 || exit 1
+
+$OUTER new-session -d -s outer -x 50 -y 12 'sleep 100' || exit 1
+$OUTER set-option -g status off || exit 1
+$OUTER set-option -g window-size manual || exit 1
+$OUTER respawn-pane -k -t outer:0.0 \
+    "$TEST_TMUX -Lfloating-status-inner-$$ -f/dev/null attach-session -t inner" ||
+    exit 1
+
+wait_for_client
+OLD_WIDTH=$($INNER display-message -p -t "$FLOAT" '#{pane_width}')
+wait_outer_has_status "WIDTH=$OLD_WIDTH"
+
+RIGHT=$($INNER display-message -p -t "$FLOAT" '#{pane_right}')
+TOP=$($INNER display-message -p -t "$FLOAT" '#{pane_top}')
+X=$((RIGHT + 2))
+Y=$((TOP + 2))
+
+# Grab the right frame and enlarge the floating pane.
+mouse 0 "$X" "$Y" M
+mouse 32 "$((X + 1))" "$Y" M
+mouse 32 "$((X + 8))" "$Y" M
+mouse 0 "$((X + 8))" "$Y" m
+
+NEW_WIDTH=$($INNER display-message -p -t "$FLOAT" '#{pane_width}')
+[ "$NEW_WIDTH" -ne "$OLD_WIDTH" ] || fail "floating pane was not resized"
+wait_outer_has_status "WIDTH=$NEW_WIDTH"
+
+exit 0

regress/floating-pane-zoom.sh

@@ -0,0 +1,158 @@
+#!/bin/sh
+
+# Moving, resizing and reordering an over-zoom float must leave the tiled
+# pane zoomed, and the changes must survive an explicit unzoom.
+
+PATH=/bin:/usr/bin
+TERM=screen
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+TMUX="$TEST_TMUX -LtestA$$ -f/dev/null"
+trap '$TMUX kill-server 2>/dev/null' 0
+trap 'exit 1' 1 2 15
+
+fail()
+{
+	echo "$*" >&2
+	exit 1
+}
+
+run()
+{
+	$TMUX "$@" || fail "failed: $*"
+}
+
+check()
+{
+	got=$(run display-message -p -t "$1" "$2") || exit 1
+	[ "$got" = "$3" ] || fail "$1 $2: got '$got', expected '$3'"
+}
+
+check_zoom()
+{
+	check "$base" '#{window_zoomed_flag}:#{pane_zoomed_flag}' '1:1'
+	check "$float" '#{pane_floating_flag}:#{pane_active}' "1:$active"
+	check "$base" '#{@unzoomed}' ''
+}
+
+run new-session -d -x 80 -y 24
+base=$(run display-message -p '#{pane_id}') || exit 1
+other=$(run split-window -dPF '#{pane_id}') || exit 1
+layout=$(run display-message -p '#{window_layout}') || exit 1
+run set-hook -g window-unzoomed 'set -g @unzoomed 1'
+
+# Cover creation before and after zoom, with both the float and the tiled
+# pane active. Modal panes use the same over-zoom flag.
+for mode in before after detached modal; do
+	if [ "$mode" != before ]; then
+		run resize-pane -Z -t "$base"
+	fi
+	case "$mode" in
+	detached) flags=-Ad; active=0 ;;
+	modal) flags=-O; active=1 ;;
+	*) flags=-A; active=1 ;;
+	esac
+	float=$(run new-pane "$flags" -PF '#{pane_id}' -t "$base" \
+	    -x 20 -y 8 -X 8 -Y 3 '') || exit 1
+	if [ "$mode" = before ]; then
+		run resize-pane -Z -t "$base"
+	fi
+	run set -gu @unzoomed
+	check_zoom
+
+	run move-pane -t "$float" -D
+	check "$float" '#{pane_top}' 5
+	check_zoom
+	run move-pane -t "$float" -U 2 -R 3 -L 1
+	check "$float" '#{pane_left}:#{pane_top}' '11:3'
+	check_zoom
+	run move-pane -t "$float" -X 25% -Y 25%
+	check "$float" '#{pane_left}:#{pane_top}' '21:7'
+	check_zoom
+	run move-pane -t "$float" -P bottom-right
+	check "$float" '#{pane_left}:#{pane_top}' '61:17'
+	check_zoom
+	run resize-pane -t "$float" -x 30 -y 10
+	check "$float" '#{pane_width}:#{pane_height}' '28:8'
+	check_zoom
+	run resize-pane -t "$float" -U 1 -L 2
+	check "$float" '#{pane_left}:#{pane_top}:#{pane_width}:#{pane_height}' \
+	    '59:16:30:9'
+	check_zoom
+	run move-pane -t "$float" -P centre
+	check "$float" '#{pane_left}:#{pane_top}' '25:7'
+	check_zoom
+
+	# Failed commands must not change zoom either.
+	for command in 'move-pane -D invalid' 'move-pane -P invalid' \
+	    'move-pane -z invalid' 'resize-pane -x invalid' \
+	    'resize-pane -D invalid'; do
+		$TMUX $command -t "$float" 2>/dev/null &&
+		    fail "unexpected success: $command"
+		check_zoom
+	done
+
+	run resize-pane -Z -t "$base"
+	check "$float" '#{pane_left}:#{pane_top}:#{pane_width}:#{pane_height}' \
+	    '25:7:30:9'
+	run kill-pane -t "$float"
+	check "$base" '#{window_layout}' "$layout"
+done
+
+# Put an ordinary (hidden while zoomed) float between two over-zoom floats
+# in the stacking order. Reordering must skip it when counting visible
+# positions, but keep all floats ahead of the tiled panes after unzoom.
+back=$(run new-pane -AdPF '#{pane_id}' -t "$base" '') || exit 1
+hidden=$(run new-pane -dPF '#{pane_id}' -t "$base" '') || exit 1
+float=$(run new-pane -AdPF '#{pane_id}' -t "$base" '') || exit 1
+active=0
+run resize-pane -Z -t "$base"
+run set -gu @unzoomed
+
+for position in backward back forward-loop; do
+	run move-pane -t "$float" -P front
+	run move-pane -t "$float" -P "$position"
+	check "$float" '#{pane_z}' 1
+	check "$back" '#{pane_z}' 0
+	check_zoom
+done
+for position in forward front backward-loop; do
+	run move-pane -t "$float" -P back
+	run move-pane -t "$float" -P "$position"
+	check "$float" '#{pane_z}' 0
+	check "$back" '#{pane_z}' 1
+	check_zoom
+done
+for z in 1 0 99; do
+	run move-pane -t "$float" -z "$z"
+	want=$z
+	[ "$z" = 99 ] && want=1
+	check "$float" '#{pane_z}' "$want"
+	check_zoom
+done
+run resize-pane -Z -t "$base"
+check "$float" '#{pane_z}' 2
+check "$base" '#{pane_z}' 4
+run kill-pane -t "$hidden"
+run kill-pane -t "$back"
+
+# Explicit zoom toggling and operations on tiled panes retain their
+# existing behaviour. The over-zoom flag alone does not make a pane a float:
+# zooming the float itself gives it a tiled cell until unzoom.
+run resize-pane -Z -t "$float"
+check "$float" '#{pane_zoomed_flag}:#{pane_floating_flag}' '1:0'
+run resize-pane -t "$float" -x 25
+check "$float" '#{window_zoomed_flag}:#{pane_floating_flag}:#{pane_width}' \
+    '0:1:23'
+run resize-pane -Z -t "$base"
+run resize-pane -t "$other" -D 1
+check "$base" '#{window_zoomed_flag}' 0
+
+# A hidden ordinary float must still be unzoomed before resizing it.
+hidden=$(run new-pane -dPF '#{pane_id}' -t "$base" '') || exit 1
+run resize-pane -Z -t "$base"
+run resize-pane -t "$hidden" -x 25
+check "$hidden" '#{window_zoomed_flag}:#{pane_floating_flag}:#{pane_width}' \
+    '0:1:23'
+
+exit 0

regress/format-fuzzy.sh

@@ -7,6 +7,8 @@ TERM=screen
 
 [ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
 TMUX="$TEST_TMUX -LtestA$$ -f/dev/null"
+trap '$TMUX kill-server 2>/dev/null' 0
+trap 'exit 1' 1 2 15
 
 # test_format $format $expected_result
 test_format()

regress/format-modifiers.sh

@@ -18,6 +18,24 @@ export TZ LANG LC_ALL
 
 [ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
 TMUX="$TEST_TMUX -LtestA$$ -f/dev/null"
+FIFO1="${TMPDIR:-/tmp}/fmt-l-$$-1"
+FIFO2="${TMPDIR:-/tmp}/fmt-l-$$-2"
+HOLD1=
+HOLD2=
+CC1=
+CC2=
+
+cleanup()
+{
+	for pid in $HOLD1 $HOLD2 $CC1 $CC2; do
+		kill "$pid" 2>/dev/null
+		wait "$pid" 2>/dev/null
+	done
+	$TMUX kill-server 2>/dev/null
+	rm -f "$FIFO1" "$FIFO2"
+}
+trap cleanup 0
+trap 'exit 1' 1 2 15
 
 ESC=$(printf '\033')
 
@@ -579,8 +597,6 @@ assert_alive "verbose loop expansion"
 
 # L loops over attached clients.  Attach two control-mode clients, each held
 # open by a background process keeping a FIFO's write end open.
-FIFO1="${TMPDIR:-/tmp}/fmt-l-$$-1"
-FIFO2="${TMPDIR:-/tmp}/fmt-l-$$-2"
 rm -f "$FIFO1" "$FIFO2"
 mkfifo "$FIFO1" "$FIFO2" || exit 1
 # Hold the write ends open so the control clients stay attached.
@@ -605,9 +621,9 @@ test_format "#{L/nr:x}" "xx"
 test_format "#{L/r:x}" "xx"
 # Now detach one and confirm the count drops to one.
 kill $HOLD2 2>/dev/null
+wait $HOLD2 2>/dev/null
+HOLD2=
 sleep 1
 test_format "#{L:x}" "x"
-kill $HOLD1 $CC1 $CC2 2>/dev/null
-rm -f "$FIFO1" "$FIFO2"
 
 exit 0

regress/format-strings.sh

@@ -7,6 +7,8 @@ TERM=screen
 
 [ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
 TMUX="$TEST_TMUX -LtestA$$ -f/dev/null"
+trap '$TMUX kill-server 2>/dev/null' 0
+trap 'exit 1' 1 2 15
 
 # test_format $format $expected_result
 test_format()

regress/format-variables.sh

@@ -71,7 +71,10 @@ cursor_very_visible
 cursor_x
 cursor_y
 history_all_bytes
+history_added
 history_bytes
+history_collected
+history_generation
 history_limit
 history_size
 host
@@ -103,6 +106,11 @@ pane_at_right
 pane_at_top
 pane_bg
 pane_bottom
+pane_command_duration
+pane_command_end_time
+pane_command_running
+pane_command_start_time
+pane_command_status
 pane_current_command
 pane_current_path
 pane_dead
@@ -120,16 +128,21 @@ pane_index
 pane_input_off
 pane_key_mode
 pane_last
+pane_last_output_time
+pane_last_prompt_time
 pane_left
 pane_marked
 pane_marked_set
+pane_modal_flag
 pane_mode
+pane_output_generation
 pane_path
 pane_pb_progress
 pane_pb_state
 pane_pid
 pane_pipe
 pane_pipe_pid
+pane_private_modes
 pane_right
 pane_search_string
 pane_start_command
@@ -141,6 +154,8 @@ pane_title
 pane_top
 pane_tty
 pane_unseen_changes
+pane_unzoomed_height
+pane_unzoomed_width
 pane_width
 pane_x
 pane_y
@@ -206,7 +221,10 @@ window_layout
 window_linked
 window_linked_sessions
 window_linked_sessions_list
+window_manual_height
+window_manual_width
 window_marked_flag
+window_modal_pane
 window_name
 window_offset_x
 window_offset_y

regress/hooks-lifecycle.sh

@@ -76,14 +76,14 @@ $TMUX set-hook -g session-closed \
 	fail "set-hook session-closed failed"
 
 # The only pane of the only window of a session exits: pane-exited, then
-# window-unlinked, then session-closed, each seeing the dead object in the
+# session-closed, then window-unlinked, each seeing the dead object in the
 # hook formats.
 pane=$($TMUX new -d -s doomed -n dwin -P -F '#{pane_id}' 'true') ||
 	fail "new-session doomed failed"
 wait_for @log \
-	"|pane-exited:$pane|window-unlinked:doomed:dwin|session-closed:doomed"
+	"|pane-exited:$pane|session-closed:doomed|window-unlinked:doomed:dwin"
 assert_unchanged @log \
-	"|pane-exited:$pane|window-unlinked:doomed:dwin|session-closed:doomed"
+	"|pane-exited:$pane|session-closed:doomed|window-unlinked:doomed:dwin"
 
 # The dead pane, window and session cannot be used as targets but the
 # server survives.
@@ -110,14 +110,14 @@ $TMUX set-hook -g pane-exited \
 	'set -gF @log "#{@log}|pane-exited:#{hook_pane}"' ||
 	fail "restore pane-exited hook failed"
 
-# kill-window on the last window: window-unlinked then session-closed but
+# kill-window on the last window: session-closed then window-unlinked but
 # no pane-exited for the panes in the killed window.
 $TMUX set -g @log '' || fail "reset @log failed"
 $TMUX new -d -s doomed2 -n dwin2 || fail "new-session doomed2 failed"
 $TMUX splitw -d -t doomed2:0 || fail "split-window doomed2 failed"
 $TMUX kill-window -t doomed2:0 || fail "kill-window failed"
-wait_for @log '|window-unlinked:doomed2:dwin2|session-closed:doomed2'
+wait_for @log '|session-closed:doomed2|window-unlinked:doomed2:dwin2'
-assert_unchanged @log '|window-unlinked:doomed2:dwin2|session-closed:doomed2'
+assert_unchanged @log '|session-closed:doomed2|window-unlinked:doomed2:dwin2'
 $TMUX has -t main || fail "server died after kill-window chain"
 
 # kill-session: session-closed fires first, then window-unlinked for its

regress/hooks-notify.sh

@@ -218,11 +218,13 @@ $TMUX set-hook -gu pane-mode-changed || fail "unset pane-mode-changed failed"
 
 # pane-exited when a pane's command exits with remain-on-exit off.
 $TMUX set -g @x 0 || fail "set @x failed"
-$TMUX set-hook -g pane-exited 'set -gF @x "#{hook}:#{hook_pane}"' ||
+$TMUX set-hook -g pane-exited \
+	'set -gF @x "#{hook}:#{hook_pane}:#{hook_exit_status}:#{hook_exit_success}"' ||
 	fail "set-hook pane-exited failed"
-pane=$($TMUX splitw -d -t main:0 -P -F '#{pane_id}' 'true') ||
+pane=$($TMUX splitw -d -t main:0 -P -F '#{pane_id}' \
-	fail "split-window true failed"
+	'trap "" HUP; exec </dev/null >/dev/null 2>&1; sleep 1; exit 42') ||
-wait_for @x "pane-exited:$pane"
+	fail "split-window exit 42 failed"
+wait_for @x "pane-exited:$pane:42:0"
 $TMUX set-hook -gu pane-exited || fail "unset pane-exited failed"
 
 # pane-died when a pane's command exits with remain-on-exit on.

regress/if-shell-error.sh

@@ -12,7 +12,8 @@ $TMUX kill-server 2>/dev/null
 
 TMP=$(mktemp)
 OUT=$(mktemp)
-trap "rm -f $TMP $OUT" 0 1 15
+trap 'rm -f "$TMP" "$OUT"; $TMUX kill-server 2>/dev/null' 0
+trap 'exit 1' 1 2 15
 
 cat <<EOF >$TMP
 if 'true' 'wibble wobble'

regress/input-common.inc

@@ -4,6 +4,9 @@ TERM=screen
 [ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
 TMUX="$TEST_TMUX -LtestA$$ -f/dev/null"
 
+# Keep panes alive until the next case or cleanup, without reading replies.
+INPUT_HOLD='while :; do sleep 3600; done'
+
 TMP=$(mktemp)
 EXP=$(mktemp)
 trap 'rm -f "$TMP" "$EXP"; $TMUX kill-server 2>/dev/null' 0 1 15
@@ -37,10 +40,10 @@ start_pane_hlimit()
 
 	$TMUX kill-server 2>/dev/null
 	sleep 0.1
-	$TMUX new-session -d -x 1 -y 1 -s test-setup "sleep 2" || exit 1
+	$TMUX new-session -d -x 1 -y 1 -s test-setup "$INPUT_HOLD" || exit 1
 	$TMUX set-option -g history-limit "$hlimit" || exit 1
 	$TMUX new-session -d -x "$sx" -y "$sy" -s "$name" \
-	    "printf '$seq'; sleep 2" || exit 1
+	    "printf '$seq'; $INPUT_HOLD" || exit 1
 	$TMUX kill-session -t test-setup
 	sleep 0.3
 }

regress/input-keys.sh

@@ -22,7 +22,19 @@ assert_key () {
 	      clear-history -t$W \; \
 	      send-keys -t$W "$key" 'EOL' || exit 1
 
-	actual_code=$($TMUX capturep -pt$W | \
+	# cat echoes the keys back asynchronously, so wait for the EOL marker
+	# to reach the pane instead of capturing straight away.
+	i=0
+	while [ $i -lt 50 ]; do
+		screen=$($TMUX capturep -pt$W)
+		case "$screen" in
+		*EOL*) break ;;
+		esac
+		i=$((i + 1))
+		sleep 0.1
+	done
+
+	actual_code=$(printf '%s\n' "$screen" | \
 			      head -1 | \
 			      sed -e 's/EOL.*$//')
 

regress/input-malformed.sh

@@ -2,6 +2,38 @@
 
 . ./input-common.inc
 
+# Wait for the terminator and following text to reach the parser.
+check_discard()
+{
+	name=$1
+	printf 'OK\n' >"$EXP"
+	i=0
+	while [ "$i" -lt 300 ]; do
+		capture_grid "$name" >"$TMP"
+		cmp -s "$TMP" "$EXP" && return 0
+		sleep 0.05
+		i=$((i + 1))
+	done
+	fail "$name (timed out waiting for discard)"
+}
+
+# The missing-terminator timer may expire before the string limit is reached
+# on a slow build. Clear any payload printed after the timeout, then check
+# that the string did not change the title and normal output has resumed.
+test_discard()
+{
+	name=$1
+	prefix=$2
+	start_cmd "$name" 8 3 "$INPUT_HOLD"
+	$TMUX select-pane -T discard-test || exit 1
+	$TMUX respawn-pane -k \
+	    "perl -e 'print qq{$prefix}, q{x} x 1100000, qq{\e\\\\\e[H\e[2JOK}'; $INPUT_HOLD" || exit 1
+	check_discard "$name"
+	$TMUX display-message -p -t "$name:" '#{pane_title}' >"$TMP" || exit 1
+	printf 'discard-test\n' >"$EXP"
+	cmp "$TMP" "$EXP" || fail "$name title"
+}
+
 start_cmd csi-param-discard 8 3 \
     "perl -e 'print qq{\e[}, q{1} x 80, qq{\030OK}'; sleep 2"
 check_capture csi-param-discard 'OK'
@@ -10,13 +42,8 @@ start_cmd csi-interm-discard 8 3 \
     "perl -e 'print qq{\e[    \030OK}'; sleep 2"
 check_capture csi-interm-discard 'OK'
 
-start_cmd osc-discard 8 3 \
+test_discard osc-discard '\e]2;'
-    "perl -e 'print qq{\e]2;}, q{x} x 1100000, qq{\e\\\\OK}'; sleep 2"
+test_discard apc-discard '\e_'
-check_capture osc-discard 'OK'
-
-start_cmd apc-discard 8 3 \
-    "perl -e 'print qq{\e_}, q{x} x 1100000, qq{\e\\\\OK}'; sleep 2"
-check_capture apc-discard 'OK'
 
 start_pane unknown-csi 8 3 '\033[?9999zOK'
 check_capture unknown-csi 'OK'

regress/input-scroll.sh

@@ -51,7 +51,7 @@ $TMUX kill-server 2>/dev/null
 sleep 0.1
 $TMUX new-session -d -x 5 -y 3 -s history \; \
     set-option -g history-limit 3 \; \
-    respawn-pane -k "printf '01\n02\n03\n04\n05\n06'; sleep 2" || exit 1
+    respawn-pane -k "printf '01\n02\n03\n04\n05\n06'; $INPUT_HOLD" || exit 1
 sleep 0.3
 $TMUX capture-pane -pN -t history: -S - -E - | normalize_capture >"$TMP"
 printf "%s\n" '01

regress/json.sh

@@ -0,0 +1,137 @@
+#!/bin/sh
+
+# Test parsing and printing JSON with display-message -j.
+
+PATH=/bin:/usr/bin
+TERM=screen
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+TMUX="$TEST_TMUX -LtestA$$ -f/dev/null"
+$TMUX kill-server 2>/dev/null
+
+fail()
+{
+	echo "$1"
+	$TMUX kill-server 2>/dev/null
+	exit 1
+}
+
+check()
+{
+	actual=$($TMUX display-message -plj "$1" 2>&1) ||
+	    fail "JSON was rejected: $1: $actual"
+	[ "$actual" = "$2" ] ||
+	    fail "JSON output mismatch: $1: expected $2, got $actual"
+}
+
+check_fail()
+{
+	if $TMUX display-message -plj "$1" >/dev/null 2>&1; then
+		fail "invalid JSON was accepted: $1"
+	fi
+}
+
+$TMUX new-session -d || exit 1
+
+check '{}' '{}'
+check ' { "z":true, "a":-9223372036854775808, "m":[{}, {"x":false}] } ' \
+    '{"a":-9223372036854775808,"m":[{},{"x":false}],"z":true}'
+check '{"max":9223372036854775807,"min":-9223372036854775808}' \
+    '{"max":9223372036854775807,"min":-9223372036854775808}'
+check '{" key":" value","{key":"[value"}' \
+    '{" key":" value","{key":"[value"}'
+check '{"brace":"{value","bracket":"[value","colon":":value",'\
+'"comma":",value","space":" value"}' \
+    '{"brace":"{value","bracket":"[value","colon":":value",'\
+'"comma":",value","space":" value"}'
+check '{"esc":"\"\\\/\b\f\n\r\t\u0041"}' \
+    '{"esc":"\"\\\/\b\f\n\r\t\u0041"}'
+check '{"unicode":"\u0123\uabcd\uABCD"}' \
+    '{"unicode":"\u0123\uabcd\uABCD"}'
+
+actual=$($TMUX display-message -palj '{}' 2>&1) ||
+    fail "display-message -aj rejected JSON: $actual"
+[ "$actual" = '{}' ] ||
+    fail "display-message -aj did not ignore -a: got $actual"
+actual=$($TMUX display-message -pIlj '{}' 2>&1) ||
+    fail "display-message -Ij rejected JSON: $actual"
+[ "$actual" = '{}' ] ||
+    fail "display-message -Ij did not ignore -I: got $actual"
+
+check_fail ''
+check_fail '   '
+check_fail '[]'
+check_fail 'true'
+check_fail '1'
+check_fail '"string"'
+check_fail '{}{}'
+
+check_fail '{'
+check_fail '{x:1}'
+check_fail '{"":1}'
+check_fail '{"x" 1}'
+check_fail '{"x",1}'
+check_fail '{"x":}'
+check_fail '{"x":,}'
+check_fail '{"x":1'
+check_fail '{"x":1 "y":2}'
+check_fail '{"x":1,,"y":2}'
+check_fail '{"x":1,}'
+check_fail '{"x":1,"x":2}'
+check_fail '{"x":{}}{}'
+check_fail '{"x":{}} trailing'
+check_fail '{"x":{'
+check_fail '{"x":{}'
+
+check_fail '{"x":['
+check_fail '{"x":[}'
+check_fail '{"x":[{}'
+check_fail '{"x":[{},}'
+check_fail '{"x":[{},]}'
+check_fail '{"x":[{}{}]}'
+check_fail '{"x":[{},,{}]}'
+check_fail '{"x":[{"y":}]}'
+check_fail '{"x":""}'
+check_fail '{"x":null}'
+check_fail '{"x":[null]}'
+check_fail '{"x":[true]}'
+check_fail '{"x":["string"]}'
+check_fail '{"x":[[]]}'
+check_fail '{"x":1.0}'
+check_fail '{"x":1e2}'
+check_fail '{"x":+1}'
+check_fail '{"x":-}'
+check_fail '{"x":0x10}'
+check_fail '{"x":01}'
+check_fail '{"x":-01}'
+check_fail '{"x":[1]}'
+check_fail '{"x":9223372036854775808}'
+check_fail '{"x":-9223372036854775809}'
+check_fail '{"x":tru}'
+check_fail '{"x":True}'
+check_fail '{"x":falsee}'
+check_fail '{"x":"bad\q"}'
+check_fail '{"x":"bad\x20"}'
+check_fail '{"x":"bad\u123"}'
+check_fail '{"x":"bad\u12x4"}'
+check_fail '{"x":"unterminated}'
+check_fail '{"x":"escaped quote\"}'
+check_fail '{"x":"line
+break"}'
+
+# The maximum object nesting depth is 200.
+json='{}'
+n=1
+while [ "$n" -lt 200 ]; do
+	json='{"x":'"$json"'}'
+	n=$((n + 1))
+done
+check "$json" "$json"
+check_fail '{"x":'"$json"'}'
+
+if $TMUX display-message -pj >/dev/null 2>&1; then
+	fail "display-message -j accepted a missing message"
+fi
+
+$TMUX kill-server 2>/dev/null
+exit 0

regress/kill-session-zoomed.sh

@@ -0,0 +1,28 @@
+#!/bin/sh
+
+# Killing a session whose window is zoomed must not crash the server:
+# window_destroy used to unzoom the window, which resized the panes and
+# fired pane-resized with the window in the payload, and releasing that
+# reference destroyed the window a second time.
+
+PATH=/bin:/usr/bin
+TERM=screen
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+TMUX="$TEST_TMUX -LtestA$$ -f/dev/null"
+$TMUX kill-server 2>/dev/null
+
+$TMUX -f/dev/null new -d -sfoo || exit 1
+$TMUX split-window -d -h -tfoo:0 || exit 1
+$TMUX resize-pane -Z -tfoo:0 || exit 1
+$TMUX new -d -sbar || exit 1
+$TMUX kill-session -tfoo || exit 1
+$TMUX has-session -tbar || exit 1
+
+# The same with the zoomed window in a session killed by kill-server.
+$TMUX new -d -sbaz || exit 1
+$TMUX split-window -d -v -tbaz:0 || exit 1
+$TMUX resize-pane -Z -tbaz:0 || exit 1
+$TMUX kill-server || exit 1
+
+exit 0

regress/layout-nesting-limit.sh

@@ -0,0 +1,77 @@
+#!/bin/sh
+
+# Version 1 layouts must reject excessive nesting without losing the session or
+# changing its layout. Check both split types and the depth limit boundary.
+
+PATH=/bin:/usr/bin
+TERM=screen
+export PATH TERM
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+DIR=$(mktemp -d) || exit 1
+TMUX="$TEST_TMUX -S$DIR/socket -f/dev/null"
+
+fail()
+{
+	echo "$*" >&2
+	exit 1
+}
+
+cleanup()
+{
+	$TMUX kill-server 2>/dev/null
+	rm -rf "$DIR"
+}
+trap cleanup 0
+trap 'exit 1' 1 2 15
+
+# Generate a checksum-valid v1 layout with one child in every nested group.
+layout()
+{
+	awk -v depth="$1" -v open="$2" 'BEGIN {
+		closing = (open == "{" ? "}" : "]")
+		body = ""
+		for (i = 0; i < depth; i++)
+			body = body "1x1,0,0" open
+		body = body "1x1,0,0"
+		for (i = 0; i < depth; i++)
+			body = body closing
+
+		ord["0"] = 48; ord["1"] = 49; ord["x"] = 120
+		ord[","] = 44; ord["{"] = 123; ord["}"] = 125
+		ord["["] = 91; ord["]"] = 93
+		csum = 0
+		for (i = 1; i <= length(body); i++) {
+			c = substr(body, i, 1)
+			bit = csum % 2
+			csum = int(csum / 2) + bit * 32768
+			csum = (csum + ord[c]) % 65536
+		}
+		printf "%04x,%s", csum, body
+	}'
+}
+
+$TMUX new-session -d -s deep -x80 -y24 'exec sleep 100' || exit 1
+
+for open in '{' '['; do
+	# A valid checksum and nesting up to the limit must still be accepted.
+	value=$(layout 1000 "$open") || fail "could not generate layout"
+	$TMUX select-layout -t deep "$value" ||
+		fail "layout at the depth limit was rejected ($open)"
+	before=$($TMUX display-message -p -t deep \
+	    '#{pane_id} #{pane_width} #{pane_height} #{window_layout}') || exit 1
+
+	for depth in 1001 1500; do
+		value=$(layout "$depth" "$open") || fail "could not generate layout"
+		$TMUX select-layout -t deep "$value" >/dev/null 2>&1 &&
+			fail "excessive nesting was accepted ($open, $depth)"
+		$TMUX has-session -t deep ||
+			fail "server died on excessive nesting ($open, $depth)"
+		after=$($TMUX display-message -p -t deep \
+		    '#{pane_id} #{pane_width} #{pane_height} #{window_layout}') || exit 1
+		[ "$before" = "$after" ] ||
+			fail "pane or layout changed after rejection ($open, $depth)"
+	done
+done
+
+exit 0

regress/layout-set.sh

@@ -0,0 +1,126 @@
+#!/bin/sh
+
+# Exercise every predefined layout, next/previous cycling, lookup and restore
+# paths, one-pane early returns, minimum-size handling and floating panes.
+
+PATH=/bin:/usr/bin
+TERM=screen
+export PATH TERM
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+DIR=$(mktemp -d) || exit 1
+TMUX_TMPDIR=$DIR
+export TMUX_TMPDIR
+TMUX="$TEST_TMUX -Ltest$$ -f/dev/null"
+SEEN="$DIR/layouts"
+
+fail()
+{
+	echo "$*" >&2
+	exit 1
+}
+
+cleanup()
+{
+	$TMUX kill-server 2>/dev/null
+	rm -rf "$DIR"
+}
+trap cleanup 0 1 15
+
+layout()
+{
+	$TMUX display-message -p -t layouts:many '#{window_layout}'
+}
+
+check_layout()
+{
+	name=$1
+	$TMUX select-layout -t layouts:many "$name" ||
+		fail "select-layout $name failed"
+	value=$(layout)
+	[ -n "$value" ] || fail "$name produced an empty layout"
+	if grep -Fxq "$value" "$SEEN"; then
+		fail "$name produced the same layout as an earlier preset"
+	fi
+	printf '%s\n' "$value" >>"$SEEN"
+	[ "$($TMUX list-panes -t layouts:many -F x | wc -l)" -eq 5 ] ||
+		fail "$name lost a pane"
+	[ "$($TMUX list-panes -t layouts:many -F '#{pane_floating_flag}' | \
+	    grep -c '^1$')" -eq 1 ] || fail "$name did not preserve the floating pane"
+}
+
+$TMUX new-session -d -s layouts -n many -x100 -y40 'exec sleep 100' || exit 1
+$TMUX set-option -g window-size manual || exit 1
+$TMUX split-window -d -h -t layouts:many 'exec sleep 100' || exit 1
+$TMUX split-window -d -v -t layouts:many 'exec sleep 100' || exit 1
+$TMUX split-window -d -h -t layouts:many 'exec sleep 100' || exit 1
+floating=$($TMUX new-pane -dP -F '#{pane_id}' -t layouts:many \
+    -x20 -y8 -X10 -Y5 'exec sleep 100') || exit 1
+: >"$SEEN"
+
+# Options exercise percentage and explicit secondary-size calculations.
+$TMUX set-option -w -t layouts:many main-pane-height 30% || exit 1
+$TMUX set-option -w -t layouts:many other-pane-height 12 || exit 1
+$TMUX set-option -w -t layouts:many main-pane-width 35% || exit 1
+$TMUX set-option -w -t layouts:many other-pane-width 20 || exit 1
+
+for name in even-horizontal even-vertical main-horizontal \
+    main-horizontal-mirrored main-vertical main-vertical-mirrored tiled; do
+	check_layout "$name"
+done
+
+# Exact and unique-prefix lookup work; ambiguous and invalid names fail.
+$TMUX select-layout -t layouts:many even-h || fail "unique layout prefix failed"
+$TMUX select-layout -t layouts:many main >/dev/null 2>&1 &&
+	fail "ambiguous layout prefix succeeded"
+$TMUX select-layout -t layouts:many no-such-layout >/dev/null 2>&1 &&
+	fail "invalid layout name succeeded"
+
+# Cycle through all layouts in both directions, including wraparound. The
+# aliases and select-layout flags share layout_set_next/previous.
+first=$(layout)
+i=0
+while [ "$i" -lt 7 ]; do
+	$TMUX next-layout -t layouts:many || exit 1
+	i=$((i + 1))
+done
+[ "$(layout)" = "$first" ] || fail "next-layout did not wrap"
+i=0
+while [ "$i" -lt 7 ]; do
+	$TMUX previous-layout -t layouts:many || exit 1
+	i=$((i + 1))
+done
+[ "$(layout)" = "$first" ] || fail "previous-layout did not wrap"
+$TMUX select-layout -t layouts:many -n || exit 1
+$TMUX select-layout -t layouts:many -p || exit 1
+
+# No argument reapplies the last preset; -o restores the previous layout; -E
+# spreads the current cell without changing the pane set.
+$TMUX kill-pane -t "$floating" || exit 1
+$TMUX select-layout -t layouts:many tiled || exit 1
+tiled=$(layout)
+$TMUX select-layout -t layouts:many even-horizontal || exit 1
+$TMUX select-layout -t layouts:many -o || exit 1
+[ "$(layout)" = "$tiled" ] || fail "select-layout -o did not restore layout"
+$TMUX select-layout -t layouts:many || exit 1
+$TMUX select-layout -t layouts:many -E || exit 1
+
+# Each arranger has a deliberate one-pane early return.
+$TMUX new-window -d -t layouts: -n one 'exec sleep 100' || exit 1
+one=$($TMUX display-message -p -t layouts:one '#{window_layout}')
+for name in even-horizontal even-vertical main-horizontal \
+    main-horizontal-mirrored main-vertical main-vertical-mirrored tiled; do
+	$TMUX select-layout -t layouts:one "$name" || exit 1
+	[ "$($TMUX display-message -p -t layouts:one '#{window_layout}')" = "$one" ] ||
+		fail "$name changed a one-pane layout"
+done
+
+# Force the minimum-size paths without requiring a terminal client.
+$TMUX resize-window -t layouts:many -x10 -y6 || exit 1
+for name in even-horizontal even-vertical main-horizontal \
+    main-horizontal-mirrored main-vertical main-vertical-mirrored tiled; do
+	$TMUX select-layout -t layouts:many "$name" || exit 1
+done
+
+$TMUX has-session -t layouts || fail "server died during layout tests"
+exit 0

regress/list-commands.sh

@@ -0,0 +1,46 @@
+#!/bin/sh
+
+# Exercise list-commands for the full table, a single command, aliases, custom
+# and empty formats, and lookup errors.
+
+PATH=/bin:/usr/bin
+TERM=screen
+export PATH TERM
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+DIR=$(mktemp -d) || exit 1
+TMUX_TMPDIR=$DIR
+export TMUX_TMPDIR
+TMUX="$TEST_TMUX -Ltest$$ -f/dev/null"
+
+cleanup()
+{
+	$TMUX kill-server 2>/dev/null
+	rm -rf "$DIR"
+}
+trap cleanup 0 1 15
+
+# Keep a server alive across commands. Otherwise a STARTSERVER-only command
+# may exit between invocations and leave a short socket-cleanup race.
+$TMUX new-session -d -s list-commands 'exec sleep 100' || exit 1
+
+all=$($TMUX list-commands) || exit 1
+printf '%s\n' "$all" | grep -q '^attach-session (attach)' || exit 1
+printf '%s\n' "$all" | grep -q '^list-commands (lscm)' || exit 1
+
+one=$($TMUX list-commands -F \
+    '#{command_list_name}|#{command_list_alias}|#{command_list_usage}' \
+    list-commands) || exit 1
+case "$one" in
+'list-commands|lscm|'*) ;;
+*) exit 1 ;;
+esac
+
+# Aliases resolve to their command, while an empty expansion prints no line.
+[ "$($TMUX list-commands -F '#{command_list_name}' lscm)" = list-commands ] ||
+	exit 1
+[ -z "$($TMUX list-commands -F '' list-commands)" ] || exit 1
+
+$TMUX list-commands tmux-no-command-$$ >/dev/null 2>&1 && exit 1
+$TMUX list-commands list >/dev/null 2>&1 && exit 1
+exit 0

regress/modal-pane.sh

@@ -337,9 +337,9 @@ $TMUX set -g @modal-prefix no
 $TMUX set -g @modal-root no
 $TMUX bind -n z set -g @modal-root yes
 
-modal=$($TMUX new-pane -OKPF '#{pane_id}' -t "$p0" \
+modal=$($TMUX new-pane -ODKPF '#{pane_id}' -t "$p0" \
     -x 20 -y 5 -X 20 -Y 10 'cat') ||
-	fail "new-pane -OK failed"
+	fail "new-pane -ODK failed"
 sleep 1
 $TMUX2 send-keys -t "$OUTER" C-b x z Enter
 sleep 1
@@ -356,9 +356,151 @@ new_left=$(fmt "$modal" '#{pane_left}')
 new_top=$(fmt "$modal" '#{pane_top}')
 [ "$new_left" -gt "$left" ] || [ "$new_top" -gt "$top" ] ||
 	fail "key-capturing modal pane did not move"
+$TMUX2 send-keys -t "$OUTER" Escape
+sleep 1
+must_equal "$(fmt modal:0 '#{window_modal_pane}')" ''
+
+modal=$($TMUX new-pane -ODKPF '#{pane_id}' -t "$p0" \
+    -x 20 -y 5 -X 20 -Y 10 'trap "" INT; exec cat') ||
+	fail "new-pane -ODK failed"
+sleep 1
+$TMUX2 send-keys -t "$OUTER" C-c
+sleep 1
+must_equal "$(fmt modal:0 '#{window_modal_pane}')" ''
+
+# A dead modal does not close on Escape or C-c without -D.
+modal=$($TMUX new-pane -OPF '#{pane_id}' -t "$p0" \
+    -x 20 -y 5 -X 20 -Y 10 'sleep 1') ||
+	fail "new-pane -O failed"
+check_ok set-option -p -t "$modal" remain-on-exit on
+sleep 2
+must_equal "$(fmt "$modal" '#{pane_dead}:#{pane_modal_flag}')" 1:1
+$TMUX2 send-keys -t "$OUTER" Escape
+sleep 1
+must_equal "$(fmt modal:0 '#{window_modal_pane}')" "$modal"
 check_ok kill-pane -t "$modal"
 sleep 1
 
+# failed-key closes successful panes and retains failed panes until a key.
+modal=$($TMUX new-pane -OPF '#{pane_id}' -t "$p0" \
+    -x 20 -y 5 -X 20 -Y 10 'sleep 1') ||
+	fail "new-pane -O failed"
+check_ok set-option -p -t "$modal" remain-on-exit failed-key
+sleep 2
+must_equal "$(fmt modal:0 '#{window_modal_pane}')" ''
+
+modal=$($TMUX new-pane -OPF '#{pane_id}' -t "$p0" \
+    -x 20 -y 5 -X 20 -Y 10 'sleep 1; exit 1') ||
+	fail "new-pane -O failed"
+check_ok set-option -p -t "$modal" remain-on-exit failed-key
+sleep 2
+must_equal "$(fmt "$modal" '#{pane_dead}:#{pane_modal_flag}')" 1:1
+must_equal "$($TMUX show-options -pv -t "$modal" remain-on-exit)" failed-key
+$TMUX2 send-keys -t "$OUTER" a
+sleep 1
+must_equal "$(fmt modal:0 '#{window_modal_pane}')" ''
+
+$TMUX bind P display-popup -E -t "$p0" -w 20 -h 5 -T popup-title 'cat'
+$TMUX2 send-keys -t "$OUTER" C-b P
+sleep 1
+modal=$(fmt modal:0 '#{window_modal_pane}')
+[ -n "$modal" ] || fail "display-popup did not create a modal pane"
+must_equal "$(fmt "$modal" '#{pane_title}')" popup-title
+must_equal "$($TMUX show-options -pv -t "$modal" pane-border-status)" top
+must_equal "$($TMUX show-options -pv -t "$modal" pane-border-format)" \
+	'#{pane_title}'
+$TMUX2 send-keys -t "$OUTER" C-b x z Enter
+sleep 1
+must_equal "$($TMUX show -gv @modal-prefix)" no
+must_equal "$($TMUX show -gv @modal-root)" no
+case "$($TMUX capture-pane -pt "$modal")" in
+*xz*) ;;
+*) fail "keys did not reach display-popup pane" ;;
+esac
+$TMUX2 send-keys -t "$OUTER" Escape
+sleep 1
+must_equal "$(fmt modal:0 '#{window_modal_pane}')" "$modal"
+$TMUX2 send-keys -t "$OUTER" C-c
+sleep 1
+must_equal "$(fmt modal:0 '#{window_modal_pane}')" ''
+
+# Creating a popup pane must not fire the split-window hook.
+check_ok set-hook -t modal after-split-window \
+	"set-option -g @popup-after-split yes"
+check_ok set-option -g @popup-after-split no
+check_ok display-popup -E -t "$p0" true
+must_equal "$($TMUX show-option -gv @popup-after-split)" no
+check_ok set-hook -u -t modal after-split-window
+
+# A borderless popup must not create a zero-sized pane in a tiny window.
+check_ok new-window -d -t modal: -n popup-small 'cat'
+check_ok set-option -w -t modal:popup-small window-size manual
+check_ok resize-window -t modal:popup-small -x 1 -y 1
+small=$(fmt modal:popup-small '#{pane_id}')
+check_ok bind Z display-popup -B -t "$small" 'cat'
+$TMUX2 send-keys -t "$OUTER" C-b Z
+sleep 1
+must_equal "$(fmt modal:popup-small '#{window_panes}')" 1
+must_equal "$(fmt modal:popup-small '#{window_modal_pane}')" ''
+
+$TMUX bind D display-popup -t "$p0" -w 20 -h 5 'printf done'
+$TMUX2 send-keys -t "$OUTER" C-b D
+sleep 2
+modal=$(fmt modal:0 '#{window_modal_pane}')
+[ -n "$modal" ] || fail "retained display-popup was not created"
+must_equal "$(fmt "$modal" '#{pane_dead}')" 1
+case "$($TMUX capture-pane -pt "$modal")" in
+*'Pane is dead'*) fail "display-popup showed remain-on-exit message" ;;
+esac
+$TMUX2 send-keys -t "$OUTER" a
+sleep 1
+must_equal "$(fmt modal:0 '#{window_modal_pane}')" "$modal"
+$TMUX2 send-keys -t "$OUTER" Escape
+sleep 1
+must_equal "$(fmt modal:0 '#{window_modal_pane}')" ''
+
+$TMUX bind K display-popup -k -t "$p0" -w 20 -h 5 'printf done'
+$TMUX2 send-keys -t "$OUTER" C-b K
+sleep 2
+modal=$(fmt modal:0 '#{window_modal_pane}')
+[ -n "$modal" ] || fail "display-popup -k was not created"
+must_equal "$(fmt "$modal" '#{pane_dead}')" 1
+$TMUX2 send-keys -t "$OUTER" a
+sleep 1
+must_equal "$(fmt modal:0 '#{window_modal_pane}')" ''
+
+$TMUX bind F display-popup -EE -t "$p0" -w 20 -h 5 'exit 1'
+$TMUX2 send-keys -t "$OUTER" C-b F
+sleep 2
+modal=$(fmt modal:0 '#{window_modal_pane}')
+[ -n "$modal" ] || fail "failed display-popup -EE did not remain"
+must_equal "$(fmt "$modal" '#{pane_dead}')" 1
+$TMUX2 send-keys -t "$OUTER" a
+sleep 1
+must_equal "$(fmt modal:0 '#{window_modal_pane}')" "$modal"
+$TMUX2 send-keys -t "$OUTER" Escape
+sleep 1
+must_equal "$(fmt modal:0 '#{window_modal_pane}')" "$modal"
+check_ok kill-pane -t "$modal"
+sleep 1
+
+check_ok display-popup -EE -t "$p0" true
+must_equal "$(fmt modal:0 '#{window_modal_pane}')" ''
+
+$TMUX bind G display-popup -EE -k -t "$p0" -w 20 -h 5 'exit 1'
+$TMUX2 send-keys -t "$OUTER" C-b G
+sleep 2
+modal=$(fmt modal:0 '#{window_modal_pane}')
+[ -n "$modal" ] || fail "failed display-popup -EE -k did not remain"
+must_equal "$(fmt "$modal" '#{pane_dead}')" 1
+must_equal "$($TMUX show-options -pv -t "$modal" remain-on-exit)" failed-key
+$TMUX2 send-keys -t "$OUTER" a
+sleep 1
+must_equal "$(fmt modal:0 '#{window_modal_pane}')" ''
+
+check_ok display-popup -EE -k -t "$p0" true
+must_equal "$(fmt modal:0 '#{window_modal_pane}')" ''
+
 # A nonmodal floating pane may remain above zoom, and switching between it and
 # the zoomed tiled pane must not unzoom the window.
 check_ok new-window -d -t modal: -n float-over-zoom 'cat'