diff options
Diffstat (limited to 'nixos/hosts')
| -rw-r--r-- | nixos/hosts/default/configuration.nix | 132 | ||||
| -rw-r--r-- | nixos/hosts/default/hardware-configuration.nix | 38 | ||||
| -rw-r--r-- | nixos/hosts/default/home.nix | 77 |
3 files changed, 247 insertions, 0 deletions
diff --git a/nixos/hosts/default/configuration.nix b/nixos/hosts/default/configuration.nix new file mode 100644 index 0000000..f349b2c --- /dev/null +++ b/nixos/hosts/default/configuration.nix @@ -0,0 +1,132 @@ +# Edit this configuration file to define what should be installed on +# your system. Help is available in the configuration.nix(5) man page +# and in the NixOS manual (accessible by running ‘nixos-help’). + +{ config, pkgs, inputs, ... }: + +{ + imports = + [ # Include the results of the hardware scan. + ./hardware-configuration.nix + inputs.home-manager.nixosModules.default + ]; + + # Bootloader. + boot.loader.systemd-boot.enable = true; + boot.loader.efi.canTouchEfiVariables = true; + + networking.hostName = "nixos"; # Define your hostname. + # networking.wireless.enable = true; # Enables wireless support via wpa_supplicant. + + nix.settings.experimental-features = [ "nix-command" "flakes" ]; + + # Configure network proxy if necessary + # networking.proxy.default = "http://user:password@proxy:port/"; + # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain"; + + # Enable networking + networking.networkmanager.enable = true; + + # Set your time zone. + time.timeZone = "Asia/Hebron"; + + # Select internationalisation properties. + i18n.defaultLocale = "en_US.UTF-8"; + + # Enable the X11 windowing system. + # You can disable this if you're only using the Wayland session. + services.xserver.enable = true; + + # Enable the KDE Plasma Desktop Environment. + services.displayManager.sddm.enable = true; + services.desktopManager.plasma6.enable = true; + + # Configure keymap in X11 + services.xserver.xkb = { + layout = "us"; + variant = ""; + }; + + # Enable CUPS to print documents. + services.printing.enable = true; + + # Enable sound with pipewire. + hardware.pulseaudio.enable = false; + security.rtkit.enable = true; + services.pipewire = { + enable = true; + alsa.enable = true; + alsa.support32Bit = true; + pulse.enable = true; + # If you want to use JACK applications, uncomment this + #jack.enable = true; + + # use the example session manager (no others are packaged yet so this is enabled by default, + # no need to redefine it in your config for now) + #media-session.enable = true; + }; + + # Enable touchpad support (enabled default in most desktopManager). + # services.xserver.libinput.enable = true; + + # Define a user account. Don't forget to set a password with ‘passwd’. + users.users.kyren = { + isNormalUser = true; + description = "Kyren"; + extraGroups = [ "networkmanager" "wheel" ]; + packages = with pkgs; [ + kdePackages.kate + # thunderbird + ]; + }; + + home-manager = { + # also pass inputs to home-manager modules + extraSpecialArgs = { inherit inputs pkgs; }; + useUserPackages = true; + users = { + "kyren" = import ./home.nix; + }; + }; + + # Install firefox. + programs.firefox.enable = true; + + # Allow unfree packages + nixpkgs.config.allowUnfree = true; + + # List packages installed in system profile. To search, run: + # $ nix search wget + environment.systemPackages = with pkgs; [ + vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default. + # wget + ]; + + # Some programs need SUID wrappers, can be configured further or are + # started in user sessions. + # programs.mtr.enable = true; + # programs.gnupg.agent = { + # enable = true; + # enableSSHSupport = true; + # }; + + # List services that you want to enable: + + # Enable the OpenSSH daemon. + services.openssh.enable = true; + + # Open ports in the firewall. + # networking.firewall.allowedTCPPorts = [ ... ]; + # networking.firewall.allowedUDPPorts = [ ... ]; + # Or disable the firewall altogether. + # networking.firewall.enable = false; + + # This value determines the NixOS release from which the default + # settings for stateful data, like file locations and database versions + # on your system were taken. It‘s perfectly fine and recommended to leave + # this value at the release version of the first install of this system. + # Before changing this value read the documentation for this option + # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html). + system.stateVersion = "24.05"; # Did you read the comment? + +} diff --git a/nixos/hosts/default/hardware-configuration.nix b/nixos/hosts/default/hardware-configuration.nix new file mode 100644 index 0000000..f8cb10a --- /dev/null +++ b/nixos/hosts/default/hardware-configuration.nix @@ -0,0 +1,38 @@ +# Do not modify this file! It was generated by ‘nixos-generate-config’ +# and may be overwritten by future invocations. Please make changes +# to /etc/nixos/configuration.nix instead. +{ config, lib, pkgs, modulesPath, ... }: + +{ + imports = + [ (modulesPath + "/installer/scan/not-detected.nix") + ]; + + boot.initrd.availableKernelModules = [ "nvme" "xhci_pci" "usbhid" "usb_storage" "sd_mod" ]; + boot.initrd.kernelModules = [ ]; + boot.kernelModules = [ "kvm-amd" ]; + boot.extraModulePackages = [ ]; + + fileSystems."/" = + { device = "/dev/disk/by-uuid/07da3892-5b26-43d5-9e41-dbab9f4a8067"; + fsType = "ext4"; + }; + + fileSystems."/boot" = + { device = "/dev/disk/by-uuid/6051-DAFB"; + fsType = "vfat"; + options = [ "fmask=0077" "dmask=0077" ]; + }; + + swapDevices = [ ]; + + # Enables DHCP on each ethernet and wireless interface. In case of scripted networking + # (the default) this is the recommended approach. When using systemd-networkd it's + # still possible to use this option, but it's recommended to use it in conjunction + # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`. + networking.useDHCP = lib.mkDefault true; + # networking.interfaces.wlo1.useDHCP = lib.mkDefault true; + + nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux"; + hardware.cpu.amd.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware; +} diff --git a/nixos/hosts/default/home.nix b/nixos/hosts/default/home.nix new file mode 100644 index 0000000..834752e --- /dev/null +++ b/nixos/hosts/default/home.nix @@ -0,0 +1,77 @@ +{ config, pkgs, ... }: + +{ + # Home Manager needs a bit of information about you and the paths it should + # manage. + home.username = "kyren"; + home.homeDirectory = "/home/kyren"; + + # This value determines the Home Manager release that your configuration is + # compatible with. This helps avoid breakage when a new Home Manager release + # introduces backwards incompatible changes. + # + # You should not change this value, even if you update Home Manager. If you do + # want to update the value, then make sure to first check the Home Manager + # release notes. + home.stateVersion = "24.05"; # Please read the comment before changing. + + # The home.packages option allows you to install Nix packages into your + # environment. + home.packages = with pkgs; [ + keepassxc + discord + git + gh + + # # It is sometimes useful to fine-tune packages, for example, by applying + # # overrides. You can do that directly here, just don't forget the + # # parentheses. Maybe you want to install Nerd Fonts with a limited number of + # # fonts? + # (pkgs.nerdfonts.override { fonts = [ "FantasqueSansMono" ]; }) + + # # You can also create simple shell scripts directly inside your + # # configuration. For example, this adds a command 'my-hello' to your + # # environment: + # (pkgs.writeShellScriptBin "my-hello" '' + # echo "Hello, ${config.home.username}!" + # '') + ]; + + # Home Manager is pretty good at managing dotfiles. The primary way to manage + # plain files is through 'home.file'. + home.file = { + # # Building this configuration will create a copy of 'dotfiles/screenrc' in + # # the Nix store. Activating the configuration will then make '~/.screenrc' a + # # symlink to the Nix store copy. + # ".screenrc".source = dotfiles/screenrc; + + # # You can also set the file content immediately. + # ".gradle/gradle.properties".text = '' + # org.gradle.console=verbose + # org.gradle.daemon.idletimeout=3600000 + # ''; + }; + + # Home Manager can also manage your environment variables through + # 'home.sessionVariables'. These will be explicitly sourced when using a + # shell provided by Home Manager. If you don't want to manage your shell + # through Home Manager then you have to manually source 'hm-session-vars.sh' + # located at either + # + # ~/.nix-profile/etc/profile.d/hm-session-vars.sh + # + # or + # + # ~/.local/state/nix/profiles/profile/etc/profile.d/hm-session-vars.sh + # + # or + # + # /etc/profiles/per-user/kyren/etc/profile.d/hm-session-vars.sh + # + home.sessionVariables = { + EDITOR = "vim"; + }; + + # Let Home Manager install and manage itself. + programs.home-manager.enable = true; +} |