Updated todos and notes

9 files changed, 22 insertions, 66 deletions

diff --git a/README.md b/README.md
index 03f73bf..e319de7 100644
--- a/README.md
+++ b/README.md
@@ -11,8 +11,6 @@
 
 The Discord alternative for Terminal nerds.
 
-TODO(kyren): replace screenshot with tape (or have both?)
-
 <p>
     <img src="./assets/eko-screenshot.png" width="100%" alt="Eko Showcase">
 </p>
diff --git a/internal/client/ui/auth/auth.go b/internal/client/ui/auth/auth.go
index 27d9377..453e423 100644
--- a/internal/client/ui/auth/auth.go
+++ b/internal/client/ui/auth/auth.go
@@ -98,8 +98,8 @@ ___] | |__] | \|    | | \|`)
 )
 
 func init() {
-	// HACK: to avoid a circular dependency, so core can transition to this
-	// I don't like how go has this issue, I would rather slower compilations
+	// HACK(kyren): to avoid a circular dependency
+	// so core can transition to this model
 	ui.NewAuth = func() tea.Model {
 		return New()
 	}
@@ -159,7 +159,7 @@ func New() Model {
 
 	m.SetSignup(false)
 
-	m.Update(nil) // HACK: force an update
+	m.Update(nil) // HACK(kyren): force an update
 
 	return m
 }
diff --git a/internal/client/ui/core/core.go b/internal/client/ui/core/core.go
index 3ccc67f..bd4fb73 100644
--- a/internal/client/ui/core/core.go
+++ b/internal/client/ui/core/core.go
@@ -180,7 +180,6 @@ func (m Model) View() string {
 		return m.tos.View()
 
 	case ConnectedAcceptedTos:
-		// TODO(kyren): auth
 		return m.loading.View()
 
 	case Authenticated:
diff --git a/internal/client/ui/core/state/state.go b/internal/client/ui/core/state/state.go
index ad2b711..ca1b66c 100644
--- a/internal/client/ui/core/state/state.go
+++ b/internal/client/ui/core/state/state.go
@@ -212,7 +212,7 @@ func UpdateMessages(info *packet.MessagesInfo) {
 		Users: unknownUsers,
 	})
 
-	// Note: this is a naive approach
+	// NOTE(kyren): this is a naive approach
 	// Ideally we check each message that was added/removed
 	// For the frequency/receiver/sender id and only remove that
 	// But it can be very slow when there are thousands of messages
@@ -340,7 +340,7 @@ func UpdateNotifications(info *packet.NotificationsInfo) []snowflake.ID {
 
 			// When someone messages you, and you don't have a signal with him
 			// already, add a signal with him so you see his messages
-			// PERF: IsFrequency is expensive so contains is checked first
+			// PERF(kyren): IsFrequency is expensive so contains is checked first
 			if !slices.Contains(Data.Signals, source) && !IsFrequency(source) {
 				signals = append(signals, source)
 			}
@@ -402,42 +402,6 @@ func SendFinalData() {
 	case <-done:
 		log.Println("All final writes completed successfully")
 	}
-
-	// HACK: Give a small grace period for the writes to be processed
-	// Tweak this value as needed
-	// time.Sleep(20 * time.Millisecond)
-
-	// TODO:
-	// I think the issue is that it's random which of these 2 requests goes
-	// first (bcz it only does the first request after the client disconnects)
-	// I could fix it server side but eh maybe not
-	// this should instead use a method that blocks until a response was
-	// received, which may need a new gateway method to do that as currently
-	// it just always sends to the prograg
-	// If this is tedious enough it might be worth it to just do it on the
-	// server side
-
-	// Also later on I should probably remove the calculate notifs in core
-	// it can be replaced with just diff-ing incoming notifs
-	// this will most likely work fine although there are some issues with
-	// scopes like becoming an admin/no longer being admin or gaining
-	// or losing access to frequencies and of course msg deletions
-	// But it's probably the right approach (also WAYYYYYY faster)
-
-	// Then there is also the issue of when switching to a frequency
-	// not yet receiving the history so it says "no keep" bcz it's not loaded
-	// but with history it would've said "yes keep" so the solutin would
-	// be to rework it quite a bit to make it stateless or smthing
-	// Then that should be most issues when it comes to notifications
-	// just need to make sure local/remote notifs reset properly when
-	// reaching the bottom
-
-	// log.Println("BLOCKING...")
-	// <-ctx.Done()
-	// log.Println("CTX DANZO")
-
-	// TODO: remove this before release
-	// assert.NoError(ctx.Err(), "context has ran out of time!")
 }
 
 func UpdateBlockedUsers(info *packet.BlockInfo) {
diff --git a/internal/client/ui/tosscreen/tosscreen.go b/internal/client/ui/tosscreen/tosscreen.go
index 8591af2..af0d77b 100644
--- a/internal/client/ui/tosscreen/tosscreen.go
+++ b/internal/client/ui/tosscreen/tosscreen.go
@@ -128,10 +128,10 @@ func (m *Model) updateContent() {
 		glamour.WithWordWrap(lineWidth),
 	)
 	content := m.content
-	content = strings.ReplaceAll(content, "@", "") // HACK: workaround to remove mailto links
+	content = strings.ReplaceAll(content, "@", "") // HACK(kyren): workaround to remove mailto links
 	content, err := r.Render(content)
 	assert.NoError(err, "this should never error")
-	content = strings.ReplaceAll(content, "", "@") // HACK: workaround to remove mailto links
+	content = strings.ReplaceAll(content, "", "@") // HACK(kyren): workaround to remove mailto links
 	m.vp.SetContent(content)
 }
 
diff --git a/internal/client/ui/viminput/viminput.go b/internal/client/ui/viminput/viminput.go
index b4f7f4a..178bce5 100644
--- a/internal/client/ui/viminput/viminput.go
+++ b/internal/client/ui/viminput/viminput.go
@@ -405,7 +405,7 @@ func (m *Model) handleKeys(key tea.KeyMsg) {
 		m.handleNormalModeKeys(key)
 		m.Save()
 	case InsertMode:
-		// Note: we don't want to save on insert mode
+		// NOTE(kyren): we don't want to save on insert mode
 		// That'd mean it'd save on every keystroke which will
 		// be very annoying
 		m.handleInsertModeKeys(key)
@@ -582,7 +582,7 @@ func (m *Model) handleNormalModeKeys(key tea.KeyMsg) {
 				runeLines = append(runeLines, []rune(line))
 			}
 
-			// Note: caps to line length, needed for len=0 col=0
+			// NOTE(kyren): caps to line length, needed for len=0 col=0
 			splittingCol := min(m.cursorColumn+1, len(line))
 			line := m.lines[m.cursorLine]
 			after := line[splittingCol:]
@@ -696,12 +696,12 @@ func (m *Model) handleInsertModeKeys(key tea.KeyMsg) {
 		return
 	}
 
-	// Note: commented out because enter is used to send a message
+	// NOTE(kyren): commented out because enter is used to send a message
 	// even in insert mode, an alternative that discord uses is
 	// to use Shift+Enter for this functionality but unfortunately
 	// this is not supported in bubbletea (probably due to terminal limitations)
-	// If there is a way to add this for Shift+Enter please notify me
-	// at Kyren223@proton.me
+	// If there is a way to add this for Shift+Enter please open an issue
+	// or a pull request and notify me, or email Kyren223@proton.me
 
 	// if key.Type == tea.KeyEnter {
 	// 	line := m.lines[m.cursorLine]
@@ -1946,7 +1946,7 @@ func (m *Model) handleVisualModeKeys(key tea.KeyMsg) {
 		if motion == "p" {
 			m.Yank(copyOfPaste) // Restore
 		}
-		// Note: we don't restore for "P" because we use it like
+		// NOTE(kyren): we don't restore for "P" because we use it like
 		// <leader>p (we paste over and keep what we had)
 		// Shift+P in visual mode is pretty useless/uncommon
 		// So using that instead of adding <leader>p makes more sense
@@ -2066,7 +2066,7 @@ func (m *Model) handleVisualLineModeKeys(key tea.KeyMsg) {
 			if motion == "p" {
 				m.Yank(copyOfPaste) // Restore
 			}
-			// Note: we don't restore for "P" because we use it like
+			// NOTE(kyren): we don't restore for "P" because we use it like
 			// <leader>p (we paste over and keep what we had)
 			// Shift+P in visual mode is pretty useless/uncommon
 			// So using that instead of adding <leader>p makes more sense
diff --git a/internal/server/api/api.go b/internal/server/api/api.go
index 2a0452a..9828af6 100644
--- a/internal/server/api/api.go
+++ b/internal/server/api/api.go
@@ -589,7 +589,7 @@ func DeleteNetwork(ctx context.Context, sess *session.Session, request *packet.D
 		return &ErrInternalError
 	}
 
-	// NOTE: important check, make sure they are the owner (authorized)
+	// NOTE(kyren): important check, make sure they are the owner (authorized)
 	if network.OwnerID != sess.ID() {
 		return &ErrPermissionDenied
 	}
@@ -1148,7 +1148,7 @@ func EditMessage(ctx context.Context, sess *session.Session, request *packet.Edi
 		return &ErrInternalError
 	}
 
-	// Note: it is possible to edit your messages in any context
+	// NOTE(kyren): it is possible to edit your messages in any context
 	// regardless if you are in the network or if you have access to
 	// the frequency (or a user signal), as long as you know the message ID
 	// This should be fine but may be changed later to be more strict
@@ -1640,7 +1640,7 @@ func Authenticate(ctx context.Context, sess *session.Session, request *packet.Au
 
 	sess.Manager().AddSession(sess, user.ID, request.PubKey)
 
-	// NOTE: as per the protocol, this must be the first message after auth
+	// NOTE(kyren): as per the protocol, this must be the first message after auth
 	payload := &packet.UsersInfo{Users: []data.User{user}}
 	ok := sess.Write(ctx, payload)
 	if !ok {
diff --git a/internal/server/server.go b/internal/server/server.go
index 9794038..bdfba15 100644
--- a/internal/server/server.go
+++ b/internal/server/server.go
@@ -362,7 +362,7 @@ func (server *server) handleConnection(conn net.Conn) {
 		slog.InfoContext(ctx, "processor done")
 	}()
 
-	// NOTE: IMPROTANT LEGAL STUFF
+	// NOTE(kyren): IMPROTANT LEGAL STUFF
 	// Sending this first thing, before client sends us any data
 	sendTosInfo(ctx, sess)
 
@@ -552,15 +552,10 @@ func timeout[T packet.Payload](
 	apiRequest func(context.Context, *session.Session, T) packet.Payload,
 	ctx context.Context, sess *session.Session, request T,
 ) packet.Payload {
-	// TODO(kyren): Remove the channel and just wait directly?
-	// No - We need to use a channel so timeout works properly
+	// NOTE(kyren): We need to use a channel so timeout works properly
 	responseChan := make(chan packet.Payload)
 
-	// TODO: Check if this is now fixed after the rewrite:
-	// currently just ignoring the given context
-	// this fixes the issue where the client disconnects so the server
-	// doesn't bother and cancels the request
-	ctx, cancel := context.WithTimeout(ctx, timeoutDuration) // no longer ignoring
+	ctx, cancel := context.WithTimeout(ctx, timeoutDuration)
 	defer cancel()
 
 	go func() {
@@ -607,7 +602,7 @@ func TokensPerRequest(requestType packet.PacketType) float64 {
 	case packet.PacketDeviceAnalytics:
 		return 0.2 // arbitrary
 
-	// TODO: once I get more data for these, add them
+	// TODO(kyren): once I get more data for these, add them
 	case packet.PacketBlockUser:
 	case packet.PacketCreateFrequency:
 	case packet.PacketCreateNetwork:
diff --git a/pkg/snowflake/snowflake.go b/pkg/snowflake/snowflake.go
index 8a281de..be56631 100644
--- a/pkg/snowflake/snowflake.go
+++ b/pkg/snowflake/snowflake.go
@@ -27,7 +27,7 @@ import (
 
 const (
 	// Epoch is set to the twitter snowflake epoch of Nov 04 2010 01:42:54 UTC in milliseconds
-	// TODO: change this to eko epoch when eko is production ready
+	// TODO(kyren): change this to eko epoch when eko is production ready
 	Epoch     int64 = 1288834974657
 	nodeBits        = 10
 	stepBits        = 12