Problem:
In setup_env, some needed logic is bypassed when clear_env=true.
Solution:
Drop the early return in setup_env().
Co-authored-by: BirdeeHub <birdee@localhost>
(cherry picked from commit 731e616a79)
feat(vim.fs): vim.fs.root() can control priority
Adds the capability of controlling the priority of searched markers in
vim.fs.root() by nesting lists.
(cherry picked from commit 0f0b96dd0f)
Problem:
vim.uv.spawn will emit ENOENT for either when the cmd or cwd do not
exist and does not tell you which.
Solution:
If an error occurs, check if cwd was supplied and included in the error
message if it does not exist.
(cherry picked from commit 532610388b)
Problem: Can't use getpos('v') in OptionSet when using setbufvar().
Solution: Don't reset Visual selection when switching to the same
buffer (zeertzjq).
closes: vim/vim#173735717ee33db
(cherry picked from commit bd01bd6564)
Problem:
Directories that are "trusted" by `vim.secure.read()`, are not detectable later
(they will prompt again). https://github.com/neovim/neovim/discussions/33587#discussioncomment-12925887
Solution:
`vim.secure.read()` returns `true` if the user trusts a directory.
Also fix other bugs:
- If `f:read('*a')` returns `nil`, we treat that as a successful read of
the file, and hash it. `f:read` returns `nil` for directories, but
it's also documented as returning `nil` "if it cannot read data with the
specified format". I reworked the implementation so we explicitly
treat directories differently. Rather than hashing `nil` to put in the
trust database, we now put "directory" in there explicitly*.
- `vim.secure.trust` (used by `:trust`) didn't actually work for
directories, as it would blindly read the contents of a netrw buffer
and hash it. Now it uses the same codepath as `vim.secure.read`, and
as a result, works correctly for directories.
(cherry picked from commit 272dba7f07)
Problem: Change applied in d3e495ce uses a byte-offset where a virtual
column is expected.
Solution: Set the cursor directly through a <Cmd> mapping, while making
sure the commands are ordered correctly by adding them to the
type-ahead buffer.
(cherry picked from commit 019b2050e1)
Problem:
When a command is not found or not executable, the error message gives
no indication about what command was actually tried.
Solution:
Always append the command name to the error message.
BEFORE:
E5108: Error executing lua …/_system.lua:248: ENOENT: no such file or directory
AFTER:
E5108: Error executing lua …/_system.lua:249: ENOENT: no such file or directory: "foo"
fix#33445
(cherry picked from commit 223ac7782e)
Problem:
nvim_buf_del_extmark error if buffer is destroyed before timer stops
Solution:
check nvim_buf_is_valid.
(cherry picked from commit 28e8190185)
Problem: Currently vim.hl.range only allows one timed highlight.
Creating another one, removes the old one.
Solution: vim.hl.range now returns a timer and a function. The timer
keeps track of how much time is left in the highlight and the function
allows you to clear it, letting the user decide what to do with old
highlights.
(cherry picked from commit eae2d3b145)
Problem:
- `:lua vim.env.<Tab>` does not show completion of environment variables
- Meanwhile, `:let $<Tab>` does show completion of environment variables
Solution:
- Fix it
Problem:
`:lua vim.lsp.c<tab>` does not list vim.lsp.completion in the completion
list after 24cea4c7f7.
Solution:
- Always include `vim.lsp._submodule` keys in candidates.
- Fixes `vim.lsp.c<tab>` -> `vim.lsp.completion`.
- Eager-load `vim.lsp.completion` to get its completion.
- Fixes `vim.lsp.completion.g<tab>` -> `vim.lsp.completion.get`.
Problem: Error messages that cause a vim.ui_attach() namespace to
detach are not visible in the message history. Decoration
provider and vim.ui_attach error messages are dissimilar.
Solution: Emit vim.ui_attach() errors as an actual message in addition
to logging it. Adjust error message format.
Problem: Message kind logic for emitting an error message is convoluted
and still results in emitting an unfinished message earlier than
wanted.
Solution: Ensure emsg_multiline() always sets the kind wanted by the caller
and doesn't isn't unset to logic for emitting the source message.
Caller is responsible for making sure multiple message chunks are
not emitted as multiple events by setting `msg_ext_skip_flush`...
## Problem
The pattern used to match indentation is wrong as can be seen in
```lua
-- current pattern doesn't match starting space
print(vim.inspect((" xyz"):match("(^%s+)%S")))
-- nil
-- instead, it matches characters `^ ` in text
print(vim.inspect(("x^ yz"):match("(^%s+)%S")))
-- "^ "
-- indentation could've been matched by, however not required
print(vim.inspect((" xyz"):match("^(%s+)%S")))
-- " "
```
## Solution
We don't even need to modify `base_indent` at every line. If every line's indentation is calculated by the previous line's indentation (which already has starting indentation) added to the starting indentation, we see that indentation is multiplied on every line.
Hence, we only add the starting line indentation to every line.
Problem:
On Windows, treesitter query files are not recognized as such when
opened from inside their directory, because the full path returned from
fnamemodify(_, ':p') contains backslashes, while the filetype patterns
expect forward slashes.
Solution:
Normalize the result of fnamemodify(_, ':p') before trying to match it
to filetype patterns.
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
Problem: Unpaired marks are shown with `filter.extmarks == true`, which
should only return visible highlights. Misleading `end_col`
included in `inspect_pos()` for unpaired mark; it is set to
`start_col + 1` which would be a visible highlight, which it is
not. Custom "is_here" filter used to get extmarks overlapping a
position.
Solution: Exclude unpaired highlight extmarks with `filter.extmarks == true`.
Set `end_col` to `start_col` for an unpaired mark. Supply
appropriate arguments to nvim_buf_get_extmarks() to return
overlapping extmarks; exclude marks whose end is at `{row, col}`
with `filter.extmarks == true`.
Problem:
The `lua/` tests dir is for Lua stdlib tests. It is not for anything
that randomly happens to be implemented with Lua.
Solution:
Move `lua/runtime_spec.lua` to `editor/runtime_spec.lua`.
Problem:
Test may fail because it matches a Lua table address, and the following
whitespace may differ depending on the stringified address length:
test/functional/lua/loop_spec.lua:233: Row 3 did not match.
Expected:
|{3: }|
|{9:Error executing callback:} |
|*{9:uv_idle_t: 0x{MATCH:%w+}} |
|{6:Press ENTER or type command to continue}^ |
Actual:
|{3: }|
|{9:Error executing callback:} |
|*{9:uv_idle_t: 0xd4c2820a00} |
|{6:Press ENTER or type command to continue}^ |
Solution:
Match a variable amount of whitespace.
Problem:
Given that `vim.snippet.expand()` sets temporary `<tab>`/`<s-tab>`
keymaps there is no way to build "smart-tab" functionality where `<tab>`
chooses the next completion candidate if the popup menu is visible.
Solution:
Set the keymap permanent in `_defaults`.
The downside of this approach is that users of multiple snippet engine's
need to adapt their keymaps to handle all their engines that are in use.
For example:
vim.keymap.set({ 'i', 's' }, "<Tab>", function()
if foreign_snippet.active() then
return "<Cmd>lua require('foreign_snippet').jump()<CR>"
elseif vim.snippet.active({ direction = 1 }) then
return "<Cmd>lua vim.snippet.jump(1)<CR>"
else
return key
end
end, { expr = true })
Upside is that using `vim.keymap.set` to override keymaps is a well
established pattern and `vim.snippet.expand` calls made by nvim itself
or plugins have working keymaps out of the box.
Co-authored-by: Maria José Solano <majosolano99@gmail.com>
Problem: yi' don't highlight last character since
8ce504820a.
Solution: Always use `opts.inclusive=true`, since calculation of `"]`
(`b_op_end`) have taken `inclusive` into account.
When multiple diagnostics appear on a single line, the virtual lines for
all diagnostics except the first were rendered with progressively fewer
columns.
**Problem:** Some weird languages have different comment syntax
depending on the location in the code, and we do not have a way to
determine the correct `commentstring` for these special cases.
**Solution:** Allow queries to specify `commentstring` values in
metadata, allowing users/`nvim-treesitter` to provide a better
commenting experience without hugely increasing the scope of the code in
core.
Problem: Sourcing buffer lines is too complicated.
Solution: Simplify the code. Make it possible to source Vim9 script lines.
(Yegappan Lakshmanan, closesvim/vim#9974)
85b43c6cb7
This commit changes the behavior of sourcing buffer lines to always have
a script ID, although sourcing the same buffer always produces the same
script ID.
vim-patch:9.1.0372: Calling CLEAR_FIELD() on the same struct twice
Problem: Calling CLEAR_FIELD() on the same struct twice.
Solution: Remove the second CLEAR_FIELD(). Move the assignment of
cookie.sourceing_lnum (zeertzjq).
closes: vim/vim#14627f68517c167
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem:
Indenting text is a common task in plugins/scripts for
presentation/formatting, yet vim has no way of doing it (especially
"dedent", and especially non-buffer text).
Solution:
Introduce `vim.text.indent()`. It sets the *exact* indentation because
that's a more difficult (and thus more useful) task than merely
"increasing the current indent" (which is somewhat easy with a `gsub()`
one-liner).
Problem: When setting an option, mapping etc. from Lua without -V1, the
script ID is set to SID_LUA even if there already is a script
ID assigned by :source.
Solution: Don't set script ID to SID_LUA if it is already a Lua script.
Also add _editor.lua to ignorelist to make script context more
useful when using vim.cmd().
Problem:
luv callback `vim.uv.new_timer():start(0, 0, function() error() end)`
causes SIGSEGV, since `xstrdup` gets NULL from `lua_tostring`.
Similar to: a5b1b83a26
Solution:
Check NULL before `xstrdup`.
Problem: Error thrown when for invalid line number which may be accessed
in an `on_detach` callback at which point line count is
intentionally set to 0.
Solution: Move empty memline check to before line number check.
Problem:
`vim.tbl_get(tbl, nil, 1)` returns `tbl` itself. In this case, `keys` is not
empty, but `ipairs` skips the iteration:
local keys = { nil, 1 }
assert(#keys == 2)
for i, k in ipairs(keys) do
assert(false, 'unreachable')
end
Solution:
Use `select("#", ...)` and `select(i, ...)` to ensure consistency for count and
iteration.
Problem: `cmdline_show` is emitted unnecessarily each event
loop iteration, because `cmdline_was_last_drawn` is never set.
Solution: Keep track of whether the cmdline was last drawn to avoid
unnecessarily emitting cmdline_show. Set `redraw_state` to
emit `cmdline_pos` when emitting `CursorMovedC`. Only emit
`cmdline_pos` when cmdline was last drawn.
Problem: nlua_call_ref_ctx() does not pop the return value in fast
context that did not error.
Solution: Fall through to end; calling nlua_call_pop_retval().
Problem: filetype: setting bash filetype is backwards incompatible
Solution: revert patch v9.1.0965, detect bash scripts again as sh
filetype
This reverts commit b9b762c21f2b61e0e7d8fee43d4d3dc8ecffd721.
related: vim/vim#16309727c567a09
Co-authored-by: Christian Brabandt <cb@256bit.org>
vim-patch:9.1.1033: tests: shaderslang was removed from test_filetype erroneously
Problem: tests: shaderslang was removed from test_filetype erroneously
(Christian Clason, after v9.1.1030)
Solution: restore the test
1d2867df0c
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem:
Calling `xstrdup` with a NULL pointer causes a SIGSEGV if `lua_tostring` returns
NULL in `nlua_luv_thread_common_cfpcall`.
Crash stack trace:
- `_platform_strlen` → `xstrdup` (memory.c:469)
- `nlua_luv_thread_common_cfpcall` (executor.c:281)
Solution:
Check if `lua_tostring` returns NULL and pass NULL to `event_create` to avoid the crash.
