Problem: completion: not possible to delay the autcompletion
Solution: add the 'autocompletedelay' option value (Girish Palya).
This patch introduces a new global option 'autocompletedelay'/'acl' that
specifies the delay, in milliseconds, before the autocomplete menu
appears after typing.
When set to a non-zero value, Vim waits for the specified time before
showing the completion popup, allowing users to reduce distraction from
rapid suggestion pop-ups or to fine-tune the responsiveness of
completion.
The default value is 0, which preserves the current immediate-popup
behavior.
closes: vim/vim#17960https://github.com/vim/vim/commit/a09b1604d4fe7516d87fbcbf2ffd2dc484799b23
N/A patch: vim-patch:9.1.1641: a few compiler warnings are output
Co-authored-by: Girish Palya <girishji@gmail.com>
addDirectoryArg with a source dir is not enough to depend on changes
to invidiual files. as a workaround, mark this step as having
side-effects (always being run) for now.
Problem: Some use cases might lead to `vim.pack.add()` failing to
`:packadd` a plugin because of missing entry in 'packpath'. Like with
`nvim --clean` or manually setting `$XDG_DATA_HOME` during startup.
Solution: Document it. A more proactive approach can be ensuring correct
'packpath' entry, but it is currently somewhat verbose to do (due to
having to adjust for Windows using `\` in 'packpath' entries).
Problem:
The load function in opts was difficult to use if you wished to
customize based on the plugin being loaded.
You could get the name, but without some way to mark a spec, that was of
limited usefulness unless you wanted to hardcode a list of names in the
function, or write a wrapper around the whole thing
Solution:
Allow users to provide an arbitrary data field in plugin specs so that
they may receive info as to how to handle that plugin in load, get() and
events, and act upon it
Co-authored-by: BirdeeHub <birdee@localhost>
Co-authored-by: Evgeni Chasnovski <evgeni.chasnovski@gmail.com>
Problem: Unable to see e.g. `inputlist()` prompts that exceed the dialog
window height.
Multi-line prompts are not handled properly, and tracking
is insufficient for messages in cmdline_block mode.
Solution: Add vim.on_key handler while the dialog window is open that
forwards paging keys to the window.
Properly render multi-line prompts. Keep track of both the start
and end of the current cmdline prompt. Append messages after the
current prompt in cmdline_block mode.
Problem: filetype: Cangjie files are not recognized
Solution: Detect *.cj files as cangjie filetype, include a syntax plugin
(WuJunkai2004)
This commit introduces a new syntax highlighting file for the Cangjie
programming language, includes 4 parts as required:
- The main syntax file: runtime/syntax/cangjie.vim
- The filetype detection rule in: runtime/filetype.vim
- The documentation update in: runtime/doc/syntax.txt
- Some menus
References:
- https://gitcode.com/Cangjie
- https://cangjie-lang.cn/
fixes: 18014
closes: vim/vim#18027https://github.com/vim/vim/commit/0c4405a6b2bc4d93c127e1b66da1b93dcfbbe3db
Co-authored-by: WuJunkai2004 <wujunkai20041123@outlook.com>
Problem: many FileType autocommands assume curbuf is the same as the target
buffer; this can cause &syntax to be restored for the wrong buffer in some cases
when TSHighlighter:destroy is called.
Solution: run nvim_exec_autocmds in the context of the target buffer via
nvim_buf_call.
This is matters for cross-compiling where we might not
be able to run the "nvim" binary on the host.
Instead reimplement the helptags extractor as a small
lua script, which we can run on the host using the nlua0
helper already used for other generator scripts.
Problem: Unicode has deprecated some code-points
Solution: Update the digraph tables to align with the Unicode v16
release (David Friant)
This commit updates the digraphs Left-Pointing Angle Bracket '</'
and Right-Pointing Angle Bracket '/>' to account for the fact that
the old Unicode codepoints for them (2329 and 232A, respectively)
have been deprecated. As per the Miscellaneous Technical code chart
(https://www.unicode.org/charts/PDF/U2300.pdf), the old digraphs
have been reassigned to the CJK Left Angle Bracket and Right Angle
Bracket (3008 and 3009) with their declaration moved to the
appropriate block.
This commit also introduces the new digraphs '<[' and ']>' to
represent the Mathematical Left Angle Bracket and Mathematical
Right Angle Bracket (27E8 and 27E9) to replace the deprecated code
points in the Technical block.
Tests have been added and, I believe, the documentation has been
updated accordingly.
closes: vim/vim#17990https://github.com/vim/vim/commit/c08b94b072588d69e0fe76bc93dcd1d8c46be469
Co-authored-by: David Friant <friant@HPEnvyx360.friant.dev>
Problem:
Detection of the pynvim module is currently done by finding the first
Python interpreter in the `PATH` and checking if it can import pynvim.
This has several problems:
- Activation of an unrelated Python virtual environment will break
automatic detection, unless pynvim is also installed in that
environment.
- Installing pynvim to the expected location is difficult. User
installation into the system-wide or user-wide Python site area is now
deprecated. On Ubuntu 24.04 with Python 3.12, for example, the
command `pip install --user pynvim` now fails with the error message
`error: externally-managed-environment`.
- Users may create a dedicated virtual environment in which to install
pynvim, but Nvim won't detect it; instead, they must either activate
it before launching Nvim (which interferes with the user of other
virtual environments) or else hard-code the variable
`g:python3_host_prog` in their `init.vim` to the path of the correct
Python interpreter. Neither option is desirable.
Solution:
Expose pynvim's Python interpreter on the `PATH` under the
name `pynvim-python`. Typical user-flow:
1. User installs either uv or pipx.
2. User installs pynvim via:
```
uv tool install --upgrade pynvim
# Or:
pipx install --upgrade pynvim
```
With corresponding changes in pynvim https://github.com/neovim/pynvim/issues/593
the above user-flow is all that's needed for Nvim to detect the
installed location of pynvim, even if an unrelated Python virtual
environments is activated. It uses standard Python tooling to automate
the necessary creation of a Python virtual environment for pyenv and the
publication of `pynvim-python` to a directory on `PATH`.
Problem: Buffer menu does not handle unicode names correctly
(after v9.1.1622)
Solution: Fix the BMHash() function (Yee Cheng Chin)
The Buffers menu uses a BMHash() function to generate a sortable number
to be used for the menu index. It used a naive (and incorrect) way of
encoding multiple ASCII values into a single integer, but assumes each
character to be only in the ASCII 32-96 range. This means if we use
non-ASCII file names (e.g. Unicode values like CJK or emojis) we get
integer underflow and overflow, causing the menu index to wrap around.
Vim's GUI implementations internally use a signed 32-bit integer for the
`gui_mch_add_menu_item()` function and so we need to make sure the menu
index is in the (0, 2^31-1) range.
To do this, if the file name starts with a non-ASCII value, we just use
the first character's value and set the high bit so it sorts after the
other ASCII ones. Otherwise, we just take the first 5 characters, and
use 5 bit for each character to encode a 30-bit number that can be
sorted.
This means Unicode file names won't be sorted beyond the first
character. This is likely going to be fine as there are lots of ways to
query buffers.
related: vim/vim#17403closes: vim/vim#17928https://github.com/vim/vim/commit/8f9de4991e84dfdc9bcc9dad0eaa2b3544ef963e
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Don't print ABI version of duplicated parsers that are later in the
runtime path (see [#35326]).
Change the sorting from `name > path` to `name > rtpath_index`, this
ensures the first (loaded) parser is first in the list and any
subsequent parsers can be considered "not loaded".
This is fuzzy at best since `vim.treesitter.language.add` can take a
path to a parser and change the load order.
The correct solution is for `vim.treesitter.language.inspect` to return
the parser path so we can compare against it and/or for it to also be
able to take a path to a parser so we can inspect it without loading it
first.
These are not needed after #35129 but making uncrustify still play nice
with them was a bit tricky.
Unfortunately `uncrustify --update-config-with-doc` breaks strings
with backslashes. This issue has been reported upstream,
and in the meanwhile auto-update on every single run has been disabled.
These are special names by convention, and giving them distinct
highlighting is a nice visual clue (using Identifier by default).
This group is named "pythonClassVar" to match the name used by
python-syntax. Some third-party color schemes are aware of this
name and customized their colors accordingly.
closes: vim/vim#17968https://github.com/vim/vim/commit/1ee1d9b43da37b157a91662a312415e4db400ba9
Co-authored-by: Jon Parise <jon@indelible.org>
Problem: fuzzy-matching can be improved
Solution: Implement a better fuzzy matching algorithm
(Girish Palya)
Replace fuzzy matching algorithm with improved fzy-based implementation
The
[current](https://www.forrestthewoods.com/blog/reverse_engineering_sublime_texts_fuzzy_match/)
fuzzy matching algorithm has several accuracy issues:
* It struggles with CamelCase
* It fails to prioritize matches at the beginning of strings, often
ranking middle matches higher.
After evaluating alternatives (see my comments
[here](https://github.com/vim/vim/issues/17531#issuecomment-3112046897)
and
[here](https://github.com/vim/vim/issues/17531#issuecomment-3121593900)),
I chose to adopt the [fzy](https://github.com/jhawthorn/fzy) algorithm,
which:
* Resolves the aforementioned issues.
* Performs better.
Implementation details
This version is based on the original fzy
[algorithm](https://github.com/jhawthorn/fzy/blob/master/src/match.c),
with one key enhancement: **multibyte character support**.
* The original implementation supports only ASCII.
* This patch replaces ascii lookup tables with function calls, making it
compatible with multibyte character sets.
* Core logic (`match_row()` and `match_positions()`) remains faithful to
the original, but now operates on codepoints rather than single-byte
characters.
Performance
Tested against a dataset of **90,000 Linux kernel filenames**. Results
(in milliseconds) show a **\~2x performance improvement** over the
current fuzzy matching algorithm.
```
Search String Current Algo FZY Algo
-------------------------------------------------
init 131.759 66.916
main 83.688 40.861
sig 98.348 39.699
index 109.222 30.738
ab 72.222 44.357
cd 83.036 54.739
a 58.94 62.242
b 43.612 43.442
c 64.39 67.442
k 40.585 36.371
z 34.708 22.781
w 38.033 30.109
cpa 82.596 38.116
arz 84.251 23.964
zzzz 35.823 22.75
dimag 110.686 29.646
xa 43.188 29.199
nha 73.953 31.001
nedax 94.775 29.568
dbue 79.846 25.902
fp 46.826 31.641
tr 90.951 55.883
kw 38.875 23.194
rp 101.575 55.775
kkkkkkkkkkkkkkkkkkkkkkkkkkkkk 48.519 30.921
```
```vim
vim9script
var haystack = readfile('/Users/gp/linux.files')
var needles = ['init', 'main', 'sig', 'index', 'ab', 'cd', 'a', 'b',
'c', 'k',
'z', 'w', 'cpa', 'arz', 'zzzz', 'dimag', 'xa', 'nha', 'nedax',
'dbue',
'fp', 'tr', 'kw', 'rp', 'kkkkkkkkkkkkkkkkkkkkkkkkkkkkk']
for needle in needles
var start = reltime()
var tmp = matchfuzzy(haystack, needle)
echom $'{needle}' (start->reltime()->reltimefloat() * 1000)
endfor
```
Additional changes
* Removed the "camelcase" option from both matchfuzzy() and
matchfuzzypos(), as it's now obsolete with the improved algorithm.
related: neovim/neovim#34101fixesvim/vim#17531closes: vim/vim#17900https://github.com/vim/vim/commit/7e0df5eee9eab872261fd5eb0068cec967a2ba77
Co-authored-by: Girish Palya <girishji@gmail.com>
