Problem: Calling termopen() or nvim_open_term() on a buffer with an
existing terminal leads to two terminals writing to the same
buffer if the terminal job is still running, or memory leak
if the terminal job has exited.
Solution: Close the terminal if the terminal job has exited, otherwise
report an error.
Problem: Crash when closing a split window if autocmds close other
split windows but there are still floating windows.
Solution: Bail out and give the window back its buffer.
Problem: error set by win_set_buf may leak if autocommands immediately close the
new window.
Solution: free the error set by win_set_buf. (prefer nvim_open_win's error as
it's more important and will cause 0 to be returned)
Problem: split_disallowed seemingly exists to prevent issues from changing
frames to accomodate a split window, which doesn't apply to floats.
Solution: remove the restriction for nvim_open_win, but only for floats.
(continue to check b_locked_split though)
NOTE: like before, the buffer we check b_locked_split for may not actually be
the target buffer "buf", as the later call to win_set_buf can fail to switch to
"buf" due to autocommands. (among other things)
Maybe we could attempt to close the new window in that case (or switch to a
different buffer if that also fails), but this is safer. (and simpler)
Fixes#36857 (and possibly some spurious E242s I've observed from extui)
Problem: nvim_win_set_config may crash when attempting to move curwin to a
different tabpage if there is no other non-float available to switch to.
Solution: fix the crash. Fix ONE_WINDOW checks in winframe_find_altwin and
win_altframe to consider floating windows by instead using one_window. Allow
one_window to consider non-current tabpages. We can use one_window in
win_close_othertab now to also better reflect its use in win_close.
Co-authored-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Problem: unlike win_close, win_close_othertab could be used to close the
autocommand window from a different tabpage. This causes aucmd_restbuf to close
the wrong window, potentially causing a crash.
Solution: disallow closing it. Also replace a deprecated use of exc_exec in the
test file.
Fixes#21409.
Problem: no check for nvim_open_win opening a new floating window into a closing
buffer, which can lead to crashes.
Solution: call check_split_disallowed; opening a new float semantically splits
from a window, so the same problems as regular splits apply. Also restore the
error if switch_win_noblock in win_set_buf fails (may not be possible to hit
this, but win_set_buf can silently succeed there since #31595).
As the lock check applies to curbuf (not the target buffer) this may feel a bit
restrictive, though this isn't different to how things like ":split" or
nvim_open_win with "split = true" works when targeting a different buffer. Only
checking the target buffer's lock will cause issues if win_set_buf doesn't end
up in the target buffer for whatever reason.
Maybe we could consider checking the lock of the buffer after win_set_buf and
close the window if it's locked (maybe a bit fiddly, especially as closing a
window can fail...), or make the open + switch operation more atomic, like how
Vim does for its popup windows..?
It also used to be the case that win_set_buf would set an error if autocommands
sent us to a different buffer than what was requested, but #31595 appears to
have also changed that... I haven't touched that here.
Problem: can't accurately know if close_buffer directly (e.g: not via autocmds)
decremented b_nwindows. This can cause crashes if win_close_othertab decides to
keep the window after calling close_buffer (if it did not free the buffer), as
b_nwindows may remain out-of-sync.
Solution: change the return value of close_buffer to accurately depict whether
it decremented b_nwindows. Check it in win_close_othertab to avoid a crash.
Similar issues may exist in other places that call close_buffer, but I've not
addressed those here (not to mention only one other place even checks its return
value...)
Problem: TabClosed is fired after close_buffer is called (after b_nwindows is
decremented) and after the tab page is removed from the list, but before it's
freed. This causes inconsistencies such as the removed tabpage having a valid
handle and functions like nvim_tabpage_get_number returning nonsense.
Solution: fire it after free_tabpage. Try to maintain the Nvim-specific
behaviour of setting `<amatch>` to the old tab page number, and the
(undocumented) behaviour of setting `<abuf>` to the buffer it was showing
(close_buffer sets w_buffer to NULL if it was freed, so it should be OK pass it
to apply_autocmds_group, similar to before).
Problem: No check for closing the only non-floating window in a non-current
tabpage that contains floats. This can lead to a tabpage that contains only
floats, causing crashes.
Solution: Copy the relevant check from win_close to win_close_othertab. Fix some
uncovered issues.
Closes#34943Fixes#31236
Co-authored-by: glepnir <glephunter@gmail.com>
In close_buffer(), free_buffer() is called to remove the buffer from
buffer_handles immediately after removing it from the buffer list, so as
long as a buffer is in buffer_handles it is always valid.
(cherry picked from commit 033302d97d)
Problem: Crash when a terminal receives OSC 2 just after closing its
buffer but before terminal job exits.
Solution: Remove FUNC_ATTR_NONNULL_ALL from buf_set_term_title() and
check for NULL.
(cherry picked from commit b67ac8cc6b)
Problem: null pointer member access when closing the only non-float in the
current tab page if autocommands after closing all floats also close all other
tab pages. (making it the last window)
Solution: check last_window again after closing the floats.
Also reduce the scope of "wp"; it would be bugprone to use it before it's later
reassigned to the rv of win_free_mem if freed by Buf/WinLeave.
(cherry picked from commit c14de47f1a)
Problem: Destroying a terminal with pending TermRequest leads to
heap-use-after-free when processing TermRequest afterwards.
Solution: Store the buffer handle instead of the Terminal pointer in the
pending TermRequest event, and don't emit TermRequest if the
terminal is already closed.
Problem: When switching to another terminal buffer in Terminal mode,
usually Nvim stays in Terminal mode, but leaves Terminal mode
if the old terminal buffer was deleted.
Solution: Don't always leave Terminal mode when active terminal buffer
is deleted. Instead let terminal_check_focus() decide that.
(cherry picked from commit 3621af9b97)
With `overlap=true`, more extmarks than the requested limit may be
collected in `extmark_get`. This then leads to an out of bounds write of
`rv` in `nvim_buf_get_extmarks`.
(cherry picked from commit 612cd99a00)
Problem: No test that undofile format does not regress
Solution: include a sample undofile to make sure we are always able to
read it
This is so, that we don't unintentionally change the undofile format and
make sure we can load an undo file that has been created by an older
Vim.
closes: vim/vim#1612714382c8bc9
Convert the undo file in samples/ using method from #13973.
Co-authored-by: Christian Brabandt <cb@256bit.org>
(cherry picked from commit 94f7302e66)
Problem:
When the `#offset!` directive is used with `:EditQuery`, the query does not take the offset into consideration when creating the extmark to preview the capture.
Solution:
Use the capture metadata to modify the node range before creating the extmark.
Problem: Buffer overflow in buf_write() when converting incomplete
multi-byte characters (Kevin Goodsell)
Solution: Make the buffer slightly larger
closes: vim/vim#19007f99de42a9f
Co-authored-by: Christian Brabandt <cb@256bit.org>
(cherry picked from commit 444e1ffe3e)
Problem: empty comma-separated patterns in an aupat aren't skipped correctly.
Solution: skip consecutive commas in an aupat.
Also simplify the logic.
(cherry picked from commit 1cde71233f)
Problem: patterns after a buffer-local pattern in a comma-separated aupat are
ignored.
Solution: ensure pat refers to the original buffer after each pattern, not the
buflocal_pat buffer, and when printing make sure it's normalized for
each pattern, not just the first.
Also simplify the logic when printing all autocommands for an event, and ensure
headings aren't repeated for each event when printing autocommands.
(cherry picked from commit 6d2330f50d)
Problem:
When `vim.g.foo = 1`, `vim.b.foo` also appears as
a completion candidate (when use emmylua_ls).
Solution:
Define separate types.
(cherry picked from commit 1aa26f5d55)
Problem: use-after-free in win_move_after if win_enter autocommands free win1/2.
Solution: set w_pos_changed before calling win_enter.
(cherry picked from commit d1189ea508, also adding
an import of "exec" in the test)
Background:
Suppose a window has concealed lines, and sets conceallevel>2,
concealcursor="". The concealed lines are displayed if the window is
curwin and the cursor is on the those lines.
Problem:
line('w$', win) switches curwin to win, and then does validate_botline
for curwin. It computes botline assuming the concealed lines displayed,
resulting in a smaller value than the actual botline that the user sees.
Solution:
Evaluate line('w$', win) without switching curwin.
Apply similar changes to other functions that switches curwin.
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
(cherry picked from commit 033f1123cd)
Problem: Wrong cursor position after formatting with long 'formatprg'.
Solution: Don't show hit-enter prompt when there are stuffed characters.
Previously a stuffed character at the hit-enter prompt will dismiss the
prompt immediately and be put in the typeahead buffer, which leads to
incorrect behavior as the typeahead buffer is processed after the stuff
buffers. Using vungetc() when KeyStuffed is TRUE can fix this problem,
but since the hit-enter prompt isn't visible anyway (and is likely not
desired here), just skip the prompt instead, which also avoids a wait
when using "wait" instead of "hit-enter" in 'messagesopt'.
fixes: vim/vim#18905closes: vim/vim#1890650325c3d59
(cherry picked from commit 18642a63be)
Problem:
When using the Nvim appimage, `~/.cache/nvim/luac` directory can grow to
250,000+ files.
Example of 2 identical files in `./luac/`:
%2ftmp%2f.mount_nvim.a65Rja0%2fusr%2fshare%2fnvim%2fruntime%2flua%2fvim%2ftreesitter.luac
%2ftmp%2f.mount_nvim.aNpxXgo%2fusr%2fshare%2fnvim%2fruntime%2flua%2fvim%2ftreesitter.luac
Analysis:
The `nvim.appimage` mounts nvim at a different temporary path each time
it is invoked. The naming scheme of these cache files is random, which
defats the purpose of the cache creates N new files on every launch of
nvim.
Steps to reproduce:
1. install `nvim.appimage`
2. `mv ~/.cache/nvim/luac ~/.cache/nvim/luac.backup`
3. `nvim`
4. Observe contents of `~/.cache/nvim/luac/`
5. Close nvim and run `nvim` again
6. Observe contents of `~/.cache/nvim/luac/` and see that new identical
files have been added with a different mount prefix
Solution:
When running from an appimage, trim the random part of the filepaths.
(cherry picked from commit 78bbe53f76)
fix(lua): relax `vim.wait()` timeout validation #36900
Problem:
After bc0635a9fc `vim.wait()` rejects floats
and NaN values.
Solution:
Restore the prior behavior, while still supporting `math.huge`. Update
tests to cover float case.
(cherry picked from commit b87bdef2a8)
Problem:
Current options for powershell and pwsh had mistakes and rationale
behind them was not clear.
Solution:
Update the suggested options by splitting up powershell and pwsh, as
well as ensuring that all options work and rationale is documented and
discussed.
(cherry picked from commit d2e445e1bd)
Problem:
`nlua_wait()` uses `luaL_checkinteger()` which doesn't support
`math.huge` since it's double type. On PUC Lua this fails with
'number has no integer representation' error and on LuaJIT this
overflows int.
Solution:
Use `luaL_checknumber()` and handle `math.huge`.
(cherry picked from commit bc0635a9fc)
Problem: sort() does not handle large numbers correctly
(Igbanam Ogbuluijah)
Solution: Don't truncate the return value of tv_get_number_chk()
(Yegappan Lakshmanan)
closes: vim/vim#1886804794efe12
Use a Lua test for now, as the Vimscript test uses tuples.
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
(cherry picked from commit 5370b7a2e0)
