Problem: SafeStateAgain not triggered if callback uses feedkeys().
Solution: Check for safe state in the input loop. Make log messages easier
to find. Add 'S' flag to state().
d103ee7843
Include misc1.c change from patch 8.1.2062.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Not clear why SafeState and SafeStateAgain are not triggered.
Solution: Add log statements.
37d1807a80
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: SafeState may be triggered at the wrong moment.
Solution: Move it up higher to after where messages are processed. Add a
SafeStateAgain event to tigger there.
69198cb8c0
SafeStateAgain is N/A.
Move SafeState functions to state.c.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
drawscreen.c vs screen.c makes absolutely no sense.
The screen exists only to draw upon it, therefore helper functions
are distributed randomly between screen.c and the file that
does the redrawing. In addition screen.c does a lot of drawing on the
screen.
It made more sense for vim/vim as our grid.c is their screen.c
Not sure if we want to dump all the code for option chars into
optionstr.c, so keep these in a optionchar.c for now.
Allow Include What You Use to remove unnecessary includes and only
include what is necessary. This helps with reducing compilation times
and makes it easier to visualise which dependencies are actually
required.
Work on https://github.com/neovim/neovim/issues/549, but doesn't close
it since this only works fully for .c files and not headers.
Problem: ModeChanged autocmd not executed when Visual mode is ended with
CTRL-C.
Solution: Do not trigger the autocmd when got_int is set. (closesvim/vim#11394)
61c4b04799
Cherry-pick removal of cmdwin feature check from patch 9.0.0663.
This was used in the past with assumption that curwin/curbuf
is "special" but this has not been true since basically forever
at this point.
Reduce NOT_VALID/CLEAR panic in options.lua . These should not
be set if an effect of the option is causing something
which by itself invokes redraw_later().
Problem: The screen.c file is much too big.
Solution: Split it in three parts. (Yegappan Lakshmanan, closesvim/vim#4943)
7528d1f6b5
This is an approximation vim-patch 8.1.2057. Applying the patch directly
isn't feasible since our version of screen.c has diverged too much,
however we still introduce drawscreen.c and drawline.c:
- screen.c is now a much smaller file used for low level screen functions
- drawline.c contains everything needed for win_line()
- drawscreen.c contains everything needed for update_screen()
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: File for Insert mode is much too big.
Solution: Split off the code for Insert completion. (Yegappan Lakshmanan,
closesvim/vim#4044)
7591bb39d5
Cherry-pick ins_compl_len() -> get_compl_len() from patch 8.2.4001.
Revert a71c5e9eb9: ctrl_x_mode is no
longer a global variable, so l_ctrl_x_mode is no longer needed.
Problem:
1. The main log routine does not protect itself against recursion.
log_lock() doesn't guard against recursion, it would deadlock...
2. 22b52dd462 (#11501) regressed 6f27f5ef91 (#10172), because
set_init_1..process_spawn tries to log (see backtrace below), but the
mutex isn't initialized yet. Even if the mutex were valid, we don't
want early logging to fallback to stderr because that can break
embedders when stdio is used for RPC.
frame 1: 0x00000001001d54f4 nvim`open_log_file at log.c:205:7
frame 2: 0x00000001001d5390 nvim`logmsg(log_level=1, context="UI: ", func_name=0x0000000000000000, line_num=-1, eol=true, fmt="win_viewport") at log.c:150:20
frame : 0x000000010039aea2 nvim`ui_call_win_viewport(grid=2, win=1000, topline=0, botline=1, curline=0, curcol=0, line_count=1) at ui_events_call.generated.h:321:3
frame 4: 0x00000001003dfefc nvim`ui_ext_win_viewport(wp=0x0000000101816400) at window.c:939:5
frame 5: 0x00000001003ec5b4 nvim`win_ui_flush at window.c:7303:7
frame 6: 0x00000001003a04c0 nvim`ui_flush at ui.c:508:3
frame 7: 0x00000001002966ba nvim`do_os_system(argv=0x0000600000c0c000, input=0x0000000000000000, len=0, output=0x0000000000000000, nread=0x00007ff7bfefe830, silent=false, forward_output=false) at shell.c:894:3
frame 8: 0x0000000100295f68 nvim`os_call_shell(cmd="unset nonomatch; vimglob() { while [ $# -ge 1 ]; do echo \"$1\"; shift; done }; vimglob >/var/folders/gk/3tttv_md06987tlwpyp62jrw0000gn/T/nvimwwvwfD/0 ~foo", opts=kShellOptExpand | kShellOptSilent | kShellOptHideMess, extra_args=0x0000000000000000) at shell.c:663:18
frame 9: 0x0000000100295845 nvim`call_shell(cmd="unset nonomatch; vimglob() { while [ $# -ge 1 ]; do echo \"$1\"; shift; done }; vimglob >/var/folders/gk/3tttv_md06987tlwpyp62jrw0000gn/T/nvimwwvwfD/0 ~foo", opts=kShellOptExpand | kShellOptSilent | kShellOptHideMess, extra_shell_arg=0x0000000000000000) at shell.c:712:14
frame 10: 0x0000000100294c6f nvim`os_expand_wildcards(num_pat=1, pat=0x00007ff7bfefeb20, num_file=0x00007ff7bfefee58, file=0x00007ff7bfefee60, flags=43) at shell.c:328:7
...
frame 23: 0x000000010028ccef nvim`expand_env_esc(srcp=",~foo", dst="~foo", dstlen=4094, esc=false, one=false, prefix=0x0000000000000000) at env.c:673:17
frame 24: 0x000000010026fdd5 nvim`option_expand(opt_idx=29, val=",~foo") at option.c:1950:3
frame 25: 0x000000010026f129 nvim`set_init_1(clean_arg=false) at option.c:558:19
frame 26: 0x00000001001ea25e nvim`early_init(paramp=0x00007ff7bfeff5f0) at main.c:198:3
frame 27: 0x00000001001ea6bf nvim`main(argc=1, argv=0x00007ff7bfeff848) at main.c:255:3
Solution:
1. Check for recursion, show "internal error" message.
- FUTURE: when "remote TUI" is merged, can we remove log_lock()?
2. Skip logging if log_init wasn't called yet.
Problem: The mode #defines are not clearly named.
Solution: Prepend MODE_. Renumber them to put the mapped modes first.
249591057b
A hunk from the patch depends on patch 8.2.4861, which hasn't been
ported yet, but that should be easy to notice.
Problem: Duplicate code.
Solution: Move code below if/else. (closesvim/vim#10314)
590f365f91
N/A patches for version.c:
vim-patch:8.2.4844: <C-S-I> is simplified to <S-Tab>
Problem: <C-S-I> is simplified to <S-Tab>.
Solution: Do not simplify CTRL if there is also SHIFT. (closesvim/vim#10313)
758a8d1999
vim-patch:8.2.4846: termcodes test fails
Problem: Termcodes test fails.
Solution: use CTRL-SHIFT-V to insert an unsimplified key. (closesvim/vim#10316)
bad8a013c2
Problem: The ModeChanged autocmd event is inefficient.
Solution: Avoid allocating memory. (closesvim/vim#10134) Rename
trigger_modechanged() to may_trigger_modechanged().
2bf52dd065
Make v:event readonly for ModeChanged.
Problem: 'virtualedit' can only be set globally.
Solution: Make 'virtualedit' global-local. (Gary Johnson, closesvim/vim#8638)
53ba05b090
I changed some macros to unsigned integer literals to avoid compiler warnings.
When the user is in ex mode, a call to mode(1) is documented to return
"cv". However, it does not currently do so, because the check which
checks for ex mode is nested inside a conditional which is never reached
in ex mode. Vim uses an explicit check for exmode_active, so let's do
the same thing here. Add some tests for this case both with a TTY and
in silent mode.
Problem: No generic way to trigger an autocommand on mode change.
Solution: Add the ModeChanged autocommand event. (Magnus Gross, closesvim/vim#8856)
f1e8876fa2
N/A patches for version.c:
vim-patch:8.2.3434: function prototype for trigger_modechanged() is incomplete
Problem: Function prototype for trigger_modechanged() is incomplete.
Solution: Add "void".
28e591dd50Fixes#4399.
Fixes#7416.
Problem: Cannot distinguish Normal and Terminal-Normal mode.
Solution: Make mode() return "nt" for Terminal-Normal mode. (issue vim/vim#8856)
72406a4bd2
before, calling vim.schedule() from inside an event would execute
the scheduled callback immediately after this event without
checking for user input in between. Break event processing
whenever user input or an interrupt is available.
Problem: Mode() does not indicate using CTRL-O from Insert mode.
Solution: Add "niI", "niR" and "niV" to mode() result. (closesvim/vim#3000)
612cc3888b
Problem: Custom operators can't act upon a forced motion. (Christian
Wellenbrock)
Solution: Add the forced motion to the mode() result. (Christian Brabandt,
closesvim/vim#3490)
5976f8ff00closes#8667closes#9476
Christian Wellenbrock:
> For (most) built in text objects it's possible to force operation on
> them to be linewise, for example by using `dVab` (`:h o_V`,
> `motion_force`). When using custom text objects (defined as mappings
> by plugins for example), this doesn't currently work.
>
> Example:
>
> onoremap x viw
>
> Open a file with a few lines each containing some words. With the
> cursor on any word, try:
>
> 1. `dw` (builtin) deletes some characters
> 2. `dVw` (builtin) deletes linewise
> 3. `dx` (from mapping) deletes some characters
> 4. `dVx` (from mapping) deletes some characters, but should delete
> linewise
ref: https://github.com/wellle/targets.vim/issues/214
ref: https://gitter.im/neovim/neovim?at=5b379ff7f1664406610e7483
Problem: The return value of mode() does not indicate that completion is
active in Replace and Insert mode. (Zhen-Huan (Kenny) Hu)
Solution: Add "c" or "x" for two kinds of completion. (Yegappan Lakshmanan,
closesvim/vim#1397) Test some more modes.
e90858d022
Unlike the normal wildmenu, the CTRL-D wild-list is not restored by
statusline redraw. (Semantics: ^D is controlled by 'wildoptions' option,
so it's in the "wild..." family.)
TODO: externalize the c_CTRL-D wild-list.
Asynchronous API functions are served immediately, which means pending
input could change the state of Nvim shortly after an async API function
result is returned.
nvim_get_mode() is different:
- If RPCs are known to be blocked, it responds immediately (without
flushing the input/event queue)
- else it is handled just-in-time before waiting for input, after
pending input was processed. This makes the result more reliable
(but not perfect).
Internally this is handled as a special case, but _semantically_ nothing
has changed: API users never know when input flushes, so this internal
special-case doesn't violate that. As far as API users are concerned,
nvim_get_mode() is just another asynchronous API function.
In all cases nvim_get_mode() never blocks for more than the time it
takes to flush the input/event queue (~µs).
Note: This doesn't address #6166; nvim_get_mode() will provoke #6166 if
e.g. `d` is operator-pending.
Closes#6159
