Problem: nvim_parse_cmd() incorrectly splits mapping commands like
into three arguments instead of preserving whitespace in the RHS.
Solution: Add special handling for mapping commands to parse them as exactly
two arguments - the LHS and the RHS with all whitespace preserved.
This commit changes the `offset!` directive so that instead of setting a
`metadata.range` value for the entire pattern, it will set a
`metadata.offset` value. This offset will be applied to the range only
in `vim.treesitter.get_range()`, rather than at directive application
time. This allows the offset to be applied to any and all nodes captured
by the given pattern, and removes the requirement that `#offset!` be
applied to only a single node.
The downside of this change is that plugins which read from
`metadata.range` may be thrown off course, but such plugins should
prefer `vim.treesitter.get_range()` when retrieving ranges anyway.
Note that `#trim!` still sets `metadata.range`, and
`vim.treesitter.get_range()` still reads from `metadata.range`, if it
exists.
Problem: The swapfile attention message is not repeated after clearing
the screen.
After clearing the screen `msg_scrolled` is reset without
clearing other related variables, causing an assert.
Solution: Make the attention message part of the confirm prompt.
Call `msg_reset_scroll()`.
Problem: Uninitialized grid for a "win" relative float when redrawing
just after it has been opened.
Solution: Ensure window grid is allocated or assigned the default grid.
Problem: Missing test case for pum display on a wrapped line.
Solution: Add a test case to cover pum behavior at line break positions.
(glepnir)
closes: vim/vim#175206cc9bd4001
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: A custom property containing a pair of square brackets will be
treated as a section.
Solution: Change the logic parsing a section, remove the first match
regex `%b[]`.
Signed-off-by: fortime <palfortime@gmail.com>
Add '^' and '$' around the pattern. This makes it less likely to make
mistakes of when writing tests with {MATCH:}, as most such tests have
text before and after {MATCH:}.
Problem: Session has wrong arglist with :tcd and :arglocal.
Solution: Also use absolute path for :argadd when there is tabpage-local
directory (zeertzjq).
related: neovim/neovim#34405closes: vim/vim#17503a304e49790
vterm does not send us the terminator in the string fragment. Our OSC 8
parser assumed that it was and therefore treated short strings as
invalid (as it assumed it was missing a terminator).
Uses the undocumented "error_exit" UI event for a different purpose:
When :detach is used on the server, send an "error_exit" with 0 `status`
to indicate that the server shouldn't wait for client exit.
Problem: 'nobuflisted' buffers are incorrectly added to v:oldfiles.
Solution: Use ignore_buf() consistently in shada_write() for buffer
marks processing.
Problem: negative matchfuzzy scores although there is a match
(Maxim Kim)
Solution: reset the score if a match has been found but the score is
negative (Girish Palya)
The fuzzy algorithm may miss some matches in long strings due to recursion
limits. As a result, the score can end up negative even when matches exist.
In such cases, reset the score to ensure it is non-negative.
fixes: #vim/vim#17449
closes: vim/vim#17469328332b0b0
Co-authored-by: Girish Palya <girishji@gmail.com>
Problem: tests: Test_diff_fold_redraw() is insufficient
(after v9.1.1439, Christ van Willegen)
Solution: improve the test (Gary Johnson)
The original Test_diff_fold_redraw() function, added 2025-06-08 at patch
9.1.1439, had a bug and didn't do a very good job of testing the fold
behavior. This new version is simpler and more thorough.
The bug was that it checked the fold state of one window twice instead
of checking both windows.
closes: vim/vim#1749269565e3618
Co-authored-by: Gary Johnson <garyjohn@spocom.com>
Problem: completion: code can be improved
Solution: remove reposition_match() and use mergesort_list(),
for fuzzy completion, sort by fuzzy score immediately after
setting a new leader (Girish Palya)
closes: vim/vim#17460b8ee1cf56e
Co-authored-by: Girish Palya <girishji@gmail.com>
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: Since 48e2a736, prompt messages are handled by an actual
active cmdline, resulting in `State` no longer being equal
to `MODE_CONFIRM` which is used in some places. E.g. to
specify the current `mode()` or to re-emit a confirm message.
Solution: Replace `MODE_CONFIRM` with a new `MODE_CMDLINE` sub-mode when
`ccline.one_key/mouse_used` is set. Use it to avoid clearing
mouse_used prompt messages, and to re-emit one_key messages
(when ext_messages is inactive, for which this is unnecessary).
Problem: When using 'winblend', transparent backgrounds (-1) are forced
to default colors (usually black) during attribute blending, breaking
the transparency effect.
Solution: Check original background colors before blending in
hl_blend_attrs(). If both background and foreground originally had
transparent backgrounds, preserve transparency instead of forcing
default colors.
Problem:
- nvim_parse_cmd('copen', {}) returns count: 0, causing nvim_cmd to override default behavior
- nvim_cmd({cmd = 'copen', args = {10}}, {}) fails with "Wrong number of arguments"
Solution:
- Only include count field in parse result when explicitly provided or non-zero
- Interpret single numeric argument as count for count-only commands like copen
FAILED
test/functional/treesitter/fold_spec.lua
@
720
:
treesitter foldexpr doesn't open folds that are not touched
test/functional/treesitter/fold_spec.lua:767: Row 1 did not match.
Expected:
|*{1:-}^t1 |
|*{1:-}# h2 |
|*{1:│}t2 |
|{3:~ }|
|{3:~ }|
|{3:~ }|
|{3:~ }|
|1 line less; before #2 {MATCH:.*}|
Actual:
|*{1: }^t1 |
|*{1:+}{2:+-- 2 lines: # h2·····················}|
|*{3:~ }|
|{3:~ }|
|{3:~ }|
|{3:~ }|
|{3:~ }|
|1 line less; before #2 0 seconds ago |
To print the expect() call that would assert the current screen state, use
screen:snapshot_util(). In case of non-deterministic failures, use
screen:redraw_debug() to show all intermediate screen states.
Snapshot:
screen:expect([[
{1: }^t1 |
{1:+}{2:+-- 2 lines: # h2·····················}|
{3:~ }|*5
1 line less; before #2 0 seconds ago |
]])
Problem:
Test often fails on cirrus CI (freebsd):
buffer cursor position is correct in terminal with number column in a line with single-cell multibyte chars and no trailing spaces, before_each
test/functional/terminal/cursor_spec.lua:805: Row 5 did not match.
Expected:
|{7: 1 } |
|{7: 2 } |
|{7: 3 } |
|{7: 4 } |
|*{7: 5 }Entering Ex mode. Type "visual" to go to Normal mode. |
|{7: 6 }:^ |
|{3:-- TERMINAL --} |
Actual:
|{7: 1 } |
|{7: 2 } |
|{7: 3 } |
|{7: 4 } |
|*{7: 5 } |
|{7: 6 }:^ |
|{3:-- TERMINAL --} |
Solution:
Skip it. Ex mode isn't that important.
Problem: A 'winblend' window floating over uninitialized cells loses
its highlighting.
Solution: Return the front attribute for uninitialized background cells.
Problem: `exists()` checks should test for being equal to 1 rather than truthy, and extui check can be more restrictive.
Solution: Adjust `exists()` guards to equal 1 and use `matchparen#CursorMoved`.
Problem: Last diff folds not merged (after v8.1.1922)
Solution: loop over all windows in the current tabpage and update all
folds (Gary Johnson)
This commit fixes a bug where the last two folds of a diff are not
merged when the last difference between the two diff'd buffers is
resolved.
Normally, when two buffers are diff'd, folding is used to show only the
text that differs and to hide the text that is the same between the two
buffers. When a difference is resolved by making a block of text the
same in both buffers, the folds are updated to merge that block with the
folds above and below it into one closed fold.
That updating of the folds did not occur when the block of text was the
last diff block in the buffers.
The bug was introduced by this patch on August 24, 2019:
patch 8.1.1922: in diff mode global operations can be very slow
Problem: In diff mode global operations can be very slow.
Solution: Do not call diff_redraw() many times, call it once when
redrawing. And also don't update folds multiple times.
Unfortunately, folds were then not updated often enough.
The problem was fixed by adding a short loop to the ex_diffgetput()
function in diff.c to update all the folds in the current tab when the
last difference is removed.
A test for this was added to test_diffmode.vim. Two of the reference
screen dumps for another test in that file,
Test_diffget_diffput_linematch(), had to be changed to have all the
folds closed rather than to have the last diff block remain open.
closes: vim/vim#174573fa0d3514b
Co-authored-by: Gary Johnson <garyjohn@spocom.com>
Problem: MS-Windows: internal compile error in uc_list() with VS 17.14
(ibear)
Solution: refactor code slightly (Mike Williams)
fixes: vim/vim#17402closes: vim/vim#174640174d8f386
Co-authored-by: Mike Williams <mrmrdubya@gmail.com>
Problem: If user init creates a floating window, startup windows
(e.g. to accomodate arglist files) are no longer created.
Solution: Check that firstwin->w_next is not floating when deciding
whether to make startup windows.
Problem: "msg_history_show" event is emitted when `msg_silent > 0`.
E.g. when capturing its output with `execute()`, which also
doesn't work with ext_messages.
Solution: Don't emit the "msg_history_show" event when `msg_silent > 0`.
Call regular messaging functions when `redirecting()`, to
execute `redir_write()` while ensuring the message itself
is not emitted.
fix(api): ensure win_get_config() is reciprocal
Problem: win_get_config() does not include a 'none' border field,
causing nvim_open_win() to apply the 'winborder' value.
Solution: Include a 'none' border field in the returned config,
such that it can be used reciprocally in nvim_open_win()
to yield the same window layout.
Problem: completion: various flaws in fuzzy completion
Solution: fix the issues (Girish Palya)
- Remove the brittle `qsort()` on `compl_match_array`.
- Add a stable, non-recursive `mergesort` for the internal doubly
linked list of matches.
- The sort now happens directly on the internal representation (`compl_T`),
preserving sync with external structures and making sorting stable.
- Update fuzzy match logic to enforce `max_matches` limits after
sorting.
- Remove `trim_compl_match_array()`, which is no longer necessary.
- Fixe test failures by correctly setting `selected` index and
maintaining match consistency.
- Introduce `mergesort_list()` in `misc2.c`, which operates generically
over doubly linked lists.
- Remove `pum_score` and `pum_idx` variables
fixes: vim/vim#17387closes: vim/vim#174308cd42a58b4
Co-authored-by: Girish Palya <girishji@gmail.com>
Problem: Listing submenus with :menu doesn't work.
Solution: Don't go to the parent of the return value of find_menu(), and
handle empty path at the caller.
Related #8194, which actually only fixed the problem for menu_get(), not
for :menu Ex command.
