when running `zig build functionaltest`, it might
take a while until the test harness nvim instance checks
for interrupts, which causes a lot of tests to keep running after
CTRL+C. Check after each test instead
This is in preparation of zig 0.17 where b.install_path is no
longer known inside `pub fn build()`.
Builds which should hardcode a runtime path into the binary has to specify it.
We could use a nlua0 helper to encode the install path at build time but
I think this is cleaner anyway. (like currently the appimage still
encodes a temporary build path which is nonsensical, it is better to
just include none)
Similarily b.args will not be available anymore (there will just
be an opaque pass-through)
Problem: srolljump=-100 only scrolls half a page going up, but works
fine going down. update_topline() always falls back to
scroll_cursor_halfway() when the cursor is far above topline.
Solution: Only center when sj is smaller than half the window. Otherwise
call scroll_cursor_top like the downward path does (glepnir).
fixes: vim/vim#1527closes: vim/vim#20366a4a60c0fdb
Problem: Redundant newlines and "Press any key" prompt with ext_messages
for Visual filter command.
Solution: Remove newlines and prompt with ext_messages.
Problem:
Edit a file with a drive-letter path, then re-edit it without the drive letter
and colon. This cause `path_fnamencmp` to loop infinitely as `len` never
reaches 0, while `c1` and `c2` are already NUL.
Commit e18a578 accidentally used || before `(p_fic`, commit 4bcee96 fixed that,
but also moved the NUL check into a grouped condition. The bug remained hidden
because there weren't any cases where strings had different lengths and c1 and
c2 could both reach NUL. `c:/foo` vs `/foo` happens to be such a case, which is
why the infinite loop finally showed up.
Solution:
Break the loop when either `c1` or `c2` is NUL.
Problem:
Diagnostic highlight groups were applied by iterating and calling
`vim.hl.range` for each group individually. That resulted in multiple
extmarks with the same priority being created separately, which does not
allow `DiagnosticUnnecessary` and `DiagnosticDeprecated` with matching
options override `Diagnostic*` styling.
Solution:
Pass the list of hl-groups to `vim.hl.range` so they are applied
together in the correct order.
Problem:
PR #38340 prevented messages we receive with id:null from being
incorrectly classified as notifications, but caused us to ignore all
messages with id:null, including requests.
Solution:
Handle requests with id:null. When we receive a request, we only need to
respond based on the `method` and `param`.
(The original so-called `notification_received` in the test was actually
semantically `request_or_notification_received`.)
Problem: After maximizing and deleting the quickfix buffer, window
height is wrong (tertium)
Solution: Reset the winfixheight option when a quickfix buffer is
deleted from a window (Yegappan Lakshmanan)
fixes: vim/vim#3378closes: vim/vim#2040307f055f579
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
The new lua based runner replaces Makefile, runnvim.sh and runnvim.vim
As it happens, we run a `--headless` nvim inside a `:terminal` layer,
this is pointless.
Also there is still a lot remnants for oldesttests, but we don't
have any except for test1.in which just checks the environment
for following, nonexistant oldesttests. so just skip that.
For now, the actual vimscript code which runs in vim-under-test is
completely unchanged.
On macos, luajit is finally working with the latest ziglua master.
Also fix some minor bugs regarding locales, such as incorrect
HAVE_WORKING_LIBINTL checks
Problem: Deleting a quickfix line and undoing it leaves the entry
pointing one line below where it should.
Solution: Don't shift already cleared entries in qf_mark_adjust.
closes: vim/vim#2037964982d6010
Problem: Indent is not stripped in whole-line completion (CTRL-X
CTRL-L).
Solution: Skip the matched line's indent for whole-line matches in
search_for_fuzzy_match (glepnir).
closes: vim/vim#204059fa5f64135
Problem: Several Vim9 keywords lack EX_WHOLE and can be shortened in
Vim9 script, inconsistent with endif/enddef/endfor/endwhile/
endtry which already have it. The error from :endd in a
nested function also hardcodes "enddef" instead of reporting
what the user typed. fullcommand("ho") returns "horizontal"
even though :ho is below the documented 3-char minimum.
Solution: Add EX_WHOLE to :class, :def, :endclass, :endinterface,
:endenum, :public and :static. In get_function_body() pass
the user-typed command to the error message. Force :ho to
CMD_SIZE in find_ex_command() so fullcommand() reflects the
modifier minimum. Extend tests and documentation accordingly
(Peter Kenny).
fixes: vim/vim#20032closes: vim/vim#2019138d9a16eba
Co-authored-by: Peter Kenny <github.com@k1w1.cyou>
Problem: tests: filetype test for v9.2.0557 can be improved
Solution: Use a correct Kawasaki robot AS test file
(Patrick Meiser-Knosowski)
related: vim/vim#20370
closes: vim/vim#203870878792046
Co-authored-by: Patrick Meiser-Knosowski <knosowski@graeffrobotics.de>
Problem: nvim_win_set_config() does not error on flags not allowed for
non-floating windows.
`hide` should not be allowed for non-floating windows.
Solution: Check that a window is a split when reconfiguring.
Error when trying to hide a split window.
Problem: The security patch 9.2.0561 added a vim.eval() call inside
Completer.evalsource() to honor g:pythoncomplete_allow_import.
But the 'vim' module is only imported inside the outer
vimcomplete() / vimpy3complete() function, not at the script's
top level, so referring to it from a Completer method raises
NameError. The surrounding bare 'except' silently swallows
the error and leaves allow_imports at 0, meaning the opt-in
never takes effect -- 'import os' (and any other
buffer-level import) is always skipped, no candidates are
produced for 'os.<...>' and
Test_popup_and_preview_autocommand() fails on the Windows
CI matrix (Linux skips the test because Python 2 is absent).
Solution: Re-import 'vim' at the top of evalsource() in both
pythoncomplete.vim and python3complete.vim so the eval reads
the global, and set g:pythoncomplete_allow_import = 1 in the
test (it is the opt-in intended for callers that trust the
buffer contents) (thinca).
closes: vim/vim#20386868ad62cb8
Co-authored-by: thinca <thinca@gmail.com>
Problem: If got_int is true when win_close() is called, it unexpectedly
fails in the branch that detects failure in apply_autocmds().
This causes wingotofile in do_window() to duplicate current
window when do_ecmd() is aborted with got_int.
Solution: Fix do_window() to save the got_int value before trying to
close the split window (Yohei Kojima).
Steps to reproduce:
1. run `touch a && touch .a.swp && echo a > b && vim b`
2. Type `<C-w>f`
3. In the warning dialogue, type `a` to abort
4. Current window is duplicated
closes: vim/vim#20382113e507cdd
Co-authored-by: Yohei Kojima <yk@y-koj.net>
Problem:
Literal tab (or other control char) in a float title/footer is
not made printable, so it renders incorrectly instead of as "^I".
Solution:
Normalize title/footer text for display like 'statusline'
tab to "^I", parameterize parse_virt_text() with untab
and recompute the width.
Problem: Redrawing in an autocommand that uses an autocommand window
(more common since 5181984d) can result in flickering.
Solution: Hide autocommand windows.
Problem: filetype: Kawasaki Robots files are not recognized
Solution: Detect *.pg as kawasaki_as filetype, add filetype detection
for *.as as atlas or kawasaki_as filetype (KnoP-01).
In Kawasaki robots (https://kawasakirobotics.com/products-robots/)
AS language
*.pg is the extention for a program file and
*.as is for a complete backup.
closes: vim/vim#20370dec3d6c7da
Co-authored-by: KnoP-01 <knosowski@graeffrobotics.de>
Problem:
It is repetitive to map multiple keymaps to do the same thing. Here are some
cases where being able to do this would be useful:
-- Visual movement for both j/k and down/up:
vim.keymap.set({ 'n', 'x' }, { 'j', '<Down>' }, 'v:count == 0 ? "gj" : "j"', { expr = true })
vim.keymap.set({ 'n', 'x' }, { 'k', '<Up>' }, 'v:count == 0 ? "gk" : "k"', { expr = true })
-- Map multiple keys to `<Nop>` concisely:
vim.keymap.set({ 'n', 'x' }, { '<Leader>', '<Localleader>', '<CR>' }, '<Nop>')
-- Remove multiple keymaps at once:
vim.keymap.del('n', { 'gri', 'grn', 'grr' })
Solution:
Support the `lhs` of `vim.keymap.set()` and `vim.keymap.del()` being a table, in
the same way that `modes` can be.
Problem:
Currently, only some filesystems (Btrfs, ext2, ext3, ext4) have full
support of accessing the `dirent` entry-type. On other filesystems,
`uv.fs_scandir_next` may return `nil` for an existing but unsupported
entry-type.
This means consumers (such as `fs.dir()`), cannot know if `nil` means
"non-existent" or "unsupported".
Solution:
Fall back to `uv.fs_lstat` when `etype` is `nil`; return "unknown" if it
fails.
Problem: cursor lands on the wrong line when a <Cmd> mapping or autocmd
modifies lines during insert and the strip is skipped
(after v9.2.0510)
Solution: Restore cursor to tpos when skipwhite skips the strip, instead
of leaving it at end_insert_pos (glepnir).
related: vim/vim#20290
closes: vim/vim#20332179f9efc7e
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: The "%v" item in 'errorformat' interprets the reported
screen column using the buffer's 'tabstop', so the cursor
jumps to the wrong column when 'tabstop' is not 8
(vimpostor).
Solution: When resolving a "%v" column, always count a <tab> as 8
screen columns, independent of 'tabstop', matching the
column numbers reported by compilers; keep the multi-byte
handling. Also use "%v" in the gcc compiler file and
update the documentation (Hirohito Higashi).
fixes: vim/vim#20321closes: vim/vim#2035944dcad20f2
Co-authored-by: Hirohito Higashi <h.east.727@gmail.com>
Co-authored-by: vimpostor <21310755+vimpostor@users.noreply.github.com>
Co-authored-by: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Problem: Redrawing when a loaded buffer is not shown in any window on
the current tabpage.
Solution: Check that buffer is shown in a (normal) window before redrawing.
Problem: filetype: too many Bitbake include files are recognized
(Brahmajit Das, after v9.1.1732)
Solution: Tighten the pattern to detect BitBake include files, update
tests (Martin Schwan).
Be more strict when detecting BitBake inc files. In particular, only
match include keywords and variable assignments at the beginning of a
line (excluding whitespace).
Use non-capturing groups to slightly improve performance.
Use regex or-operators to exactly match BitBake assignment operators.
The previous expression would falsely match
FOO .=. "bar"
, which is not valid BitBake syntax. The new capturing group is more
specific and matches only valid assignments.
fixes: vim/vim#20288closes: vim/vim#203352df68c8e4b
Co-authored-by: Martin Schwan <m.schwan@phytec.de>
Problem: A leading space in the result of a %{} item is sometimes
stripped, and an all-digit result is converted to a number.
Solution: Add %0{} atom which inserts the expression result verbatim
(glepnir)
fixes: vim/vim#3898closes: vim/vim#20315e8d7a40b98
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: tests: matchit plugin is not tested
Solution: Add test_plugin_matchit, improve b:match_words for the html
filetype plugin (Andrey Starodubtsev)
`b:match_words` which contains patterns used by `matchit` plugin to find
tag's counterpath, is fixed so that matching happens using the whole
tag, not just its first letter.
Also, it allows to find matching tag in case if there are spaces or
attributes after tag name.
fixes: chrisbra/matchit#51closes: vim/vim#203133a90b2ba8e
Co-authored-by: Andrey Starodubtsev <andrey.starodubtsev@gmail.com>
Problem: After CTRL-R CTRL-P (or CTRL-R CTRL-O) pastes a register
into Insert mode, a follow-up edit such as backspace makes
stop_arrow() rewrite Insstart with the post-paste cursor
position. As a result the '[ mark points at the end of the
inserted text instead of its start (agguser, after 9.2.0384)
Solution: In stop_arrow(), only pull Insstart back when the cursor
moved above the previous Insstart, so a line-start backspace
can still save the joined range (vim/vim#20031) without disturbing
the start position for inserts that advance the cursor
(Hirohito Higashi).
related: vim/vim#20031
fixes: vim/vim#20130
closes: vim/vim#20322bc7805323f
Co-authored-by: Hirohito Higashi <h.east.727@gmail.com>
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Problem: tests: Test_invalid_args() fails on GTK4 builds when
xterm_clipboard is not enabled
Solution: Add has('xterm_clipboard') check to the test, while at it,
also document the --display argument.
closes: vim/vim#203187e55dae2fe
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: spell: a word in a .dic file with many postponed prefix or
compound flags overflows the fixed-size store_afflist[MAXWLEN]
buffer in get_pfxlist() and get_compflags().
Solution: Add bounds checks (Yasuhiro Matsumoto).
closes: vim/vim#202869a920e8254
Co-authored-by: Yasuhiro Matsumoto <mattn.jp@gmail.com>
Problem: tests: no test for using shellescape() in combination with :!
Solution: Add a test that checks runtime files for using wrong
combination of shellescape() with ! ex command
This has lead to a few security relevant issues, so add a test that
checks all runtime files for any ! followed by a shellescape() that does
not use the {special} arg.
related: Commit: 3fb5e58fbc63d86a3e65f1a141b0d67af2 (patch 9.2.0479:
[security]: runtime(tar): command injection in tar plugin)
closes: vim/vim#20286
Supported by AI
fccc2adc98
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: quickfix: can set quickfixtextfunc in restricted/sandbox mode
(tacdm)
Solution: Disallow setting the quickfixtextfunc option from a sandbox
and restricted mode (Yegappan Lakshmanan).
closes: vim/vim#20305cb8510d470
Co-Authored-by: tacdm
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: virtualedit=insert doesn't work during change operation
(after 6.1.014).
Solution: Make virtual_op only affect virtualedit=block (zeertzjq).
related: neovim/neovim#35391
closes: vim/vim#202983d0a6073e5
