Update CHANGES and tests.

whinging about not supporting it, GitHub issue 5626 from Pete Dietl.

.github/workflows/regress.yml

@@ -72,14 +72,14 @@ jobs:
 
       - name: build
         run: |
-         sh autogen.sh
+          sh autogen.sh
           ./configure ${{ matrix.configure }}
           ${{ matrix.make }} -j"$(getconf _NPROCESSORS_ONLN)"
 
       - name: test
         run: |
           cd regress
-          ${{ matrix.make }}
+          ${{ matrix.make }} -j"$(getconf _NPROCESSORS_ONLN)"
 
       - name: logs
         if: failure()

CHANGES

@@ -9,7 +9,12 @@ CHANGES FROM 3.7c TO 3.8
 
   - modal panes may be created with new-pane -O; a window can have one modal
     pane and it prevents interaction with the other panes while it is active.
-    A modal pane is now used for the editor in buffer mode;
+    -C closes the pane when the mouse is clicked outside it and -K sends all
+    keys, including the prefix key, to the pane. -D closes the modal pane with
+    Escape or C-c. A modal pane is now used for the editor in buffer mode;
+
+  - new-pane -A creates a floating pane which remains above a zoomed pane;
+    modal panes do this by default;
 
   - move-pane and resize-pane can now move and resize floating panes, including
     mouse dragging;
@@ -24,10 +29,18 @@ CHANGES FROM 3.7c TO 3.8
     -k for choose commands kills the pane when the mode exits, which is useful
     for modes in floating panes;
 
-  - pane-border-status has top-floating and bottom-floating, and there are new
-    default bindings under C-b g for common move and resize operations;
+  - command-prompt -P opens a prompt inside a pane rather than on the status
+    line;
 
-  - floating panes are unzoomed before creation to avoid a crash.
+  - pane-border-status has top-floating and bottom-floating, and there are new
+    default bindings under C-b g for common move and resize operations.
+
+* Layout strings now use a JSON subset format which includes floating panes.
+  The old format is still accepted; control mode clients receive old layouts
+  unless they set the new-layouts flag.
+
+* Add remain-on-exit failed-key to keep a pane open after a failed command
+  until a key is pressed.
 
 * Add support for themes and improve default colours:
 
@@ -74,7 +87,7 @@ CHANGES FROM 3.7c TO 3.8
 
   - new hooks to cover areas including client create and destroy, pane
     activity, pane mode and prompt changes, pane movement and resizing, session
-    group changes and window creation, close and zoom;
+    group changes and window creation, close, swap and zoom;
 
   - OSC 133 escape sequences now trigger events: pane-command-started,
     pane-command-finished and pane-shell-prompt.
@@ -87,10 +100,29 @@ CHANGES FROM 3.7c TO 3.8
   while scrolling or while hovered and disappears after pane-scrollbars-timeout
   (Michael Grant).
 
-* Extend the fill-character option so both inside and outside the window can be
-  changed.
+* Add a clear-on-attach server option. When disabled, tmux does not enter the
+  alternate screen on attach and instead scrolls the existing terminal content
+  into the scrollback buffer so it remains accessible (issue 5508).
 
-* Change set-option and set-hooks to use formats and add a -F flag to each.
+* Copy mode can now automatically refresh as pane content changes with the
+  refresh-on, refresh-off and refresh-toggle commands. Automatic refresh is off
+  by default; refresh-now refreshes once and is bound to r. These replace
+  refresh-from-pane (issue 5165).
+
+* Extend the fill-character option so both inside and outside the window can be
+  changed, with a new default for unused areas inside the window.
+
+* Change show-options and show-hooks to use formats and add a -F flag to each.
+
+* Allow individual terminal features to be disabled by adding @ to their names
+  in terminal-features, and add a utf8 feature for terminals which support
+  UTF-8 output.
+
+* Add an appesc terminal feature for mintty's application escape key mode,
+  avoiding unsupported sequences on other terminals (Pete Dietl, issue 5626).
+
+* Preserve existing Ss and Se terminfo capabilities for cursor styles and
+  restoring the default cursor (issue 5476).
 
 * Add a #{A/count:frames} modifier to show a series of frames as an animation
   in the status line (issue 5412 from Fernando Daciuk).
@@ -105,6 +137,12 @@ CHANGES FROM 3.7c TO 3.8
 * Add new-window -E, respawn-pane -E and respawn-window -E as more convenient
   methods to create an empty pane (rather than using '' for the command).
 
+* Add capture-pane -I to include the time each line entered history.
+
+* Various memory leak fixes from Heon Jeong.
+
+* Add a default C-b T binding to change the current pane title.
+
 * Menus now belong to the window, so appear on all clients.
 
 * Dragging over an existing copy mode selection now adjusts it (Michael Grant).
@@ -118,6 +156,13 @@ CHANGES FROM 3.7c TO 3.8
 * Copy mode no longer exits at the bottom while a selection is in progress
   (issue 5349).
 
+* Add copy-mode-current-line-style to set the style of the line containing the
+  cursor in copy mode (issue 5391).
+
+* Copy mode word commands now recognise all Unicode whitespace characters; a
+  space in word-separators matches any Unicode whitespace character (issue
+  5562).
+
 * Add style attributes for dimming colours (dim=) and for hyperlinks (link= and
   nolink) (issues 4842 and 4280 from Moritz Angermann).
 
@@ -128,7 +173,9 @@ CHANGES FROM 3.7c TO 3.8
 
 * Add or improve format variables including client_colours,
   pane_start_command_list, window_manual_width, window_manual_height,
-  pane_last_output_time, pane_modal_flag and window_modal_pane.
+  pane_last_output_time, pane_modal_flag, window_modal_pane, pane_private_modes,
+  pane_output_generation, history_added, history_collected, history_generation,
+  hook_fire_count and hook_fire_time.
 
 * Add additional pane sort orders, and a z sort order for choose-tree so
   floating panes can be sorted by z-index.
@@ -140,15 +187,34 @@ CHANGES FROM 3.7c TO 3.8
 
 * The mouse option now defaults to on.
 
+* The active-pane client flag has been removed.
+
 * Fix send-keys -K so keys are inserted in the correct place in the input
   queue, like keys from key bindings (issue 3476).
 
 * Fix control mode clients hanging on exit if pty data was still queued (Ben
   Maurer, issue 5356), and avoid sending notifications to clients which are
-  already exiting (Ben Maurer, issue 5357).
+  already exiting (Ben Maurer, issue 5357). Queue notifications so they are not
+  sent inside %begin/%end (issue 5458), do not let a stuck client prevent the
+  server from exiting (issue 5444), and reset control mode offsets when a pane
+  is respawned (issue 5498). Bound buffered command replies so a control mode
+  client that stops reading cannot consume unlimited memory (issue 5565), and
+  fix a collision between the output discard and bracketed paste flags (issue
+  5622).
 
 * Fix grouped sessions sometimes being left as unusable command targets while
-  they are being killed (Bryce Miller, issue 5180).
+  they are being killed (Bryce Miller, issue 5180), and prevent reuse of a
+  session with no windows while detaching (Heon Jeong, issue 5620).
+
+* Free wait-for clients when they disconnect and do not run their remaining
+  queued commands (issue 5614).
+
+* Expand formats in run-shell -c like other start-directory flags (reported by
+  Saul Nogueras).
+
+* Fix session alert flag formats to check all windows (issue 5599).
+
+* Do not clear the marked pane when clicking on a pane border.
 
 * Fix choose mode filtering when more than one pane exists (issue 5326), and
   fix an infinite loop in customize mode when a filter does not match.
@@ -159,11 +225,18 @@ CHANGES FROM 3.7c TO 3.8
   status lines, menus, popups, wide characters and floating panes. This
   includes fixes for flicker with alternate screen applications and scrollbars
   (Michael Grant, issue 5351; Noam Stolero, issue 5350; Aung Myo Kyaw, issue
-  5098).
+  5098), and misplaced wrapped lines during partial redraws (Ben Maurer, issue
+  5625).
 
 * Do not crash looking for the next or previous session (issue 5344), or when
   no client is available.
 
+* Fix crashes when destroying a zoomed pane (Romain Francoise, issue 5591),
+  copying from a blank source pane (Kaixuan Li), or opening a mode prompt when
+  the client is offset into the window.
+
+* Avoid an infinite loop when assigning a width to WCHAR_MAX (issue 5602).
+
 CHANGES FROM 3.7b TO 3.7c
 
 * Build with jemalloc on macOS to avoid what appears to be a bug in calloc

Makefile.am

@@ -85,7 +85,6 @@ endif
 
 # List of sources.
 dist_tmux_SOURCES = \
-	active.c \
 	alerts.c \
 	arguments.c \
 	attributes.c \
@@ -175,6 +174,7 @@ dist_tmux_SOURCES = \
 	input-keys.c \
 	input.c \
 	job.c \
+	json.c \
 	key-bindings.c \
 	key-string.c \
 	layout-custom.c \

active.c

@@ -1,449 +0,0 @@
-/* $OpenBSD$ */
-
-/*
- * Copyright (c) 2026 Nicholas Marriott <nicholas.marriott@gmail.com>
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include <sys/types.h>
-
-#include <stdlib.h>
-
-#include "tmux.h"
-
-/* Local last-window stack entry. */
-struct active_window_entry {
-	u_int					window;
-	TAILQ_ENTRY(active_window_entry)	entry;
-};
-
-/* Local last-window stack. */
-TAILQ_HEAD(active_window_stack, active_window_entry);
-
-/* Per-client and per-session local active window state. */
-struct active_window {
-	struct client			*client;
-	struct session			*session;
-
-	u_int				 window;
-	struct active_window_stack	 lastw;
-
-	RB_ENTRY(active_window)		 entry;
-};
-RB_HEAD(active_windows, active_window);
-
-static int
-active_window_cmp(struct active_window *aw1, struct active_window *aw2)
-{
-	uintptr_t	c1 = (uintptr_t)aw1->client;
-	uintptr_t	c2 = (uintptr_t)aw2->client;
-	uintptr_t	s1 = (uintptr_t)aw1->session;
-	uintptr_t	s2 = (uintptr_t)aw2->session;
-
-	if (c1 < c2)
-		return (-1);
-	if (c1 > c2)
-		return (1);
-	if (s1 < s2)
-		return (-1);
-	if (s1 > s2)
-		return (1);
-	return (0);
-}
-RB_GENERATE_STATIC(active_windows, active_window, entry, active_window_cmp);
-
-static struct active_window *active_get(struct client *, struct session *);
-static struct active_window *active_add(struct client *, struct session *,
-		    struct winlink *);
-static void	active_free(struct active_window *);
-static struct winlink *active_resolve(struct active_window *);
-static void	active_stack_remove(struct active_window_stack *, u_int);
-static void	active_stack_push(struct active_window_stack *, u_int);
-static void	active_changed(struct client *, struct session *,
-		    struct winlink *, struct winlink *);
-
-/* All local active window states. */
-static struct active_windows active_windows = RB_INITIALIZER(&active_windows);
-
-/* Find local active window state for a client and session. */
-static struct active_window *
-active_get(struct client *c, struct session *s)
-{
-	struct active_window	aw;
-
-	if (c == NULL || s == NULL)
-		return (NULL);
-	aw.client = c;
-	aw.session = s;
-	return (RB_FIND(active_windows, &active_windows, &aw));
-}
-
-/* Add local active window state for a client and session. */
-static struct active_window *
-active_add(struct client *c, struct session *s, struct winlink *wl)
-{
-	struct active_window	*aw;
-
-	aw = active_get(c, s);
-	if (aw == NULL) {
-		aw = xcalloc(1, sizeof *aw);
-		aw->client = c;
-		aw->session = s;
-		TAILQ_INIT(&aw->lastw);
-		RB_INSERT(active_windows, &active_windows, aw);
-	}
-	if (wl != NULL)
-		aw->window = wl->window->id;
-	return (aw);
-}
-
-/* Free local active window state. */
-static void
-active_free(struct active_window *aw)
-{
-	struct active_window_entry	*awe;
-
-	while (!TAILQ_EMPTY(&aw->lastw)) {
-		awe = TAILQ_FIRST(&aw->lastw);
-		TAILQ_REMOVE(&aw->lastw, awe, entry);
-		free(awe);
-	}
-	RB_REMOVE(active_windows, &active_windows, aw);
-	free(aw);
-}
-
-/* Resolve local active window state to a valid winlink. */
-static struct winlink *
-active_resolve(struct active_window *aw)
-{
-	struct winlink	*wl, *next;
-	u_int		 window;
-
-	if (aw == NULL || aw->session->curw == NULL)
-		return (NULL);
-
-	wl = winlink_find_by_window_id(&aw->session->windows, aw->window);
-	if (wl != NULL)
-		return (wl);
-
-	while (!TAILQ_EMPTY(&aw->lastw)) {
-		window = TAILQ_FIRST(&aw->lastw)->window;
-
-		next = winlink_find_by_window_id(&aw->session->windows, window);
-		active_stack_remove(&aw->lastw, window);
-		if (next != NULL) {
-			aw->window = next->window->id;
-			return (next);
-		}
-	}
-
-	aw->window = aw->session->curw->window->id;
-	return (aw->session->curw);
-}
-
-/* Remove a window from a local last-window stack. */
-static void
-active_stack_remove(struct active_window_stack *stack, u_int window)
-{
-	struct active_window_entry	*awe, *awe1;
-
-	TAILQ_FOREACH_SAFE(awe, stack, entry, awe1) {
-		if (awe->window == window) {
-			TAILQ_REMOVE(stack, awe, entry);
-			free(awe);
-		}
-	}
-}
-
-/* Push a window onto a local last-window stack. */
-static void
-active_stack_push(struct active_window_stack *stack, u_int window)
-{
-	struct active_window_entry	*awe;
-
-	active_stack_remove(stack, window);
-	awe = xcalloc(1, sizeof *awe);
-	awe->window = window;
-	TAILQ_INSERT_HEAD(stack, awe, entry);
-}
-
-/* Notify the server that a client's effective window changed. */
-static void
-active_changed(struct client *c, struct session *s, struct winlink *wl,
-    struct winlink *old)
-{
-	struct event_payload	*ep;
-	struct cmd_find_state	 fs;
-
-	if (wl == NULL || wl == old)
-		return;
-
-	if (options_get_number(global_options, "focus-events")) {
-		if (old != NULL)
-			window_update_focus(old->window);
-		window_update_focus(wl->window);
-	}
-	winlink_clear_flags(wl);
-	window_update_activity(wl->window);
-	tty_update_window_offset(wl->window);
-
-	if (c != NULL && c->session == s)
-		wl->window->latest = c;
-
-	ep = event_payload_create();
-	cmd_find_from_winlink(&fs, wl, 0);
-	event_payload_set_target(ep, &fs);
-	event_payload_set_client(ep, "client", c);
-	event_payload_set_session(ep, "session", s);
-	event_payload_set_window(ep, "window", wl->window);
-	event_payload_set_window(ep, "new_window", wl->window);
-	event_payload_set_int(ep, "window_index", wl->idx);
-	event_payload_set_int(ep, "new_window_index", wl->idx);
-	if (old != NULL) {
-		event_payload_set_window(ep, "old_window", old->window);
-		event_payload_set_int(ep, "old_window_index", old->idx);
-	}
-	events_fire("client-window-changed", ep);
-
-	if (c != NULL) {
-		c->flags |= CLIENT_REDRAWWINDOW|CLIENT_REDRAWSTATUS|
-		    CLIENT_REDRAWBORDERS;
-		tty_update_client_offset(c);
-		status_update_cache(s);
-	}
-	recalculate_sizes();
-}
-
-/* Return if a client has local window selection for a session. */
-int
-active_is_local_window(struct client *c, struct session *s)
-{
-	return (active_get(c, s) != NULL);
-}
-
-/* Make a client use local or shared window selection for a session. */
-void
-active_set_local_window(struct client *c, struct session *s,
-    enum active_window_mode mode)
-{
-	struct active_window	*aw;
-	struct winlink		*wl, *old;
-
-	if (c == NULL || s == NULL || s->curw == NULL)
-		return;
-
-	old = active_get_effective_winlink(c, s);
-	if (mode == ACTIVE_LOCAL) {
-		active_add(c, s, old);
-		if (c != NULL && c->session == s)
-			c->flags |= CLIENT_REDRAWSTATUS;
-		return;
-	}
-
-	aw = active_get(c, s);
-	if (aw != NULL) {
-		active_free(aw);
-		wl = active_get_effective_winlink(c, s);
-		active_changed(c, s, wl, old);
-		if (c != NULL && c->session == s)
-			c->flags |= CLIENT_REDRAWSTATUS;
-	}
-}
-
-/* Return the effective winlink for a client and session. */
-struct winlink *
-active_get_effective_winlink(struct client *c, struct session *s)
-{
-	struct active_window	*aw;
-
-	if (s == NULL)
-		return (NULL);
-	aw = active_get(c, s);
-	if (aw != NULL)
-		return (active_resolve(aw));
-	return (s->curw);
-}
-
-/* Return the effective window for a client and session. */
-struct window *
-active_get_effective_window(struct client *c, struct session *s)
-{
-	struct winlink	*wl;
-
-	wl = active_get_effective_winlink(c, s);
-	if (wl == NULL)
-		return (NULL);
-	return (wl->window);
-}
-
-/* Select a winlink for a client and session. */
-int
-active_select_window(struct client *c, struct session *s, struct winlink *wl)
-{
-	struct active_window	*aw;
-	struct winlink		*old;
-	int			 changed;
-
-	if (wl == NULL)
-		return (-1);
-	aw = active_get(c, s);
-	if (aw == NULL)
-		return (session_set_current(s, wl));
-
-	old = active_resolve(aw);
-	if (old == wl)
-		return (1);
-	if (old != NULL)
-		active_stack_push(&aw->lastw, old->window->id);
-	active_stack_remove(&aw->lastw, wl->window->id);
-	aw->window = wl->window->id;
-	changed = (old != wl);
-	active_changed(c, s, wl, old);
-	return (changed ? 0 : 1);
-}
-
-/* Select a window by index. */
-int
-active_select_window_index(struct client *c, struct session *s, int idx)
-{
-	struct winlink	*wl;
-
-	wl = winlink_find_by_index(&s->windows, idx);
-	return (active_select_window(c, s, wl));
-}
-
-/* Select the next window. */
-int
-active_next_window(struct client *c, struct session *s, int alert)
-{
-	struct winlink	*wl;
-
-	wl = active_get_effective_winlink(c, s);
-	if (wl == NULL)
-		return (-1);
-	do {
-		wl = winlink_next(wl);
-		if (wl == NULL)
-			wl = RB_MIN(winlinks, &s->windows);
-		if (!alert || (wl->flags & WINLINK_ALERTFLAGS))
-			return (active_select_window(c, s, wl));
-	} while (wl != active_get_effective_winlink(c, s));
-	return (-1);
-}
-
-/* Select the previous window. */
-int
-active_previous_window(struct client *c, struct session *s, int alert)
-{
-	struct winlink	*wl;
-
-	wl = active_get_effective_winlink(c, s);
-	if (wl == NULL)
-		return (-1);
-	do {
-		wl = winlink_previous(wl);
-		if (wl == NULL)
-			wl = RB_MAX(winlinks, &s->windows);
-		if (!alert || (wl->flags & WINLINK_ALERTFLAGS))
-			return (active_select_window(c, s, wl));
-	} while (wl != active_get_effective_winlink(c, s));
-	return (-1);
-}
-
-/* Select the last window. */
-int
-active_last_window(struct client *c, struct session *s)
-{
-	struct active_window	*aw;
-	struct winlink		*wl;
-	u_int			 window;
-
-	aw = active_get(c, s);
-	if (aw == NULL)
-		return (session_last(s));
-	while (!TAILQ_EMPTY(&aw->lastw)) {
-		window = TAILQ_FIRST(&aw->lastw)->window;
-
-		wl = winlink_find_by_window_id(&s->windows, window);
-		if (wl != NULL)
-			return (active_select_window(c, s, wl));
-		active_stack_remove(&aw->lastw, window);
-	}
-	return (-1);
-}
-
-/* Remove all state for a client. */
-void
-active_remove_client(struct client *c)
-{
-	struct active_window	*aw, *aw1;
-
-	RB_FOREACH_SAFE(aw, active_windows, &active_windows, aw1) {
-		if (aw->client == c)
-			active_free(aw);
-	}
-}
-
-/* Remove all state for a session. */
-void
-active_remove_session(struct session *s)
-{
-	struct active_window	*aw, *aw1;
-
-	RB_FOREACH_SAFE(aw, active_windows, &active_windows, aw1) {
-		if (aw->session == s)
-			active_free(aw);
-	}
-}
-
-/* Remove a window from all local state. */
-void
-active_remove_window(struct window *w)
-{
-	struct active_window		*aw;
-
-	RB_FOREACH(aw, active_windows, &active_windows) {
-		active_stack_remove(&aw->lastw, w->id);
-		if (aw->window == w->id && aw->session->curw != NULL)
-			aw->window = aw->session->curw->window->id;
-	}
-}
-
-/* Return if this winlink is the effective winlink. */
-int
-active_is_effective_window(struct client *c, struct session *s,
-    struct winlink *wl)
-{
-	return (wl != NULL && wl == active_get_effective_winlink(c, s));
-}
-
-/* Return if this winlink is the last effective winlink. */
-int
-active_is_last_window(struct client *c, struct session *s, struct winlink *wl)
-{
-	struct active_window		*aw;
-	struct active_window_entry	*awe;
-
-	if (wl == NULL)
-		return (0);
-	aw = active_get(c, s);
-	if (aw == NULL)
-		return (wl == TAILQ_FIRST(&s->lastw));
-	TAILQ_FOREACH(awe, &aw->lastw, entry) {
-		if (winlink_find_by_window_id(&s->windows, awe->window) == NULL)
-			continue;
-		return (wl->window->id == awe->window);
-	}
-	return (0);
-}

alerts.c

@@ -314,7 +314,7 @@ alerts_set_message(struct winlink *wl, const char *type, const char *option)
 			tty_putcode(&c->tty, TTYC_BEL);
 		if (visual == VISUAL_OFF)
 			continue;
-		if (active_get_effective_winlink(c, c->session) == wl) {
+		if (c->session->curw == wl) {
 			status_message_set(c, -1, 1, 0, 0,
 			    "%s in current window", type);
 		} else {

cmd-attach-session.c

@@ -93,7 +93,7 @@ cmd_attach_session(struct cmdq_item *item, const char *tflag, int dflag,
 	if (wl != NULL) {
 		if (wp != NULL)
 			window_set_active_pane(wp->window, wp, 1);
-		active_select_window(c, s, wl);
+		session_set_current(s, wl);
 		if (wp != NULL)
 			cmd_find_from_winlink_pane(current, wl, wp, 0);
 		else

cmd-break-pane.c

@@ -93,18 +93,14 @@ cmd_break_pane_exec(struct cmd *self, struct cmdq_item *item)
 	struct cmd_find_state	*current = cmdq_get_current(item);
 	struct cmd_find_state	*target = cmdq_get_target(item);
 	struct cmd_find_state	*source = cmdq_get_source(item);
-	struct client		*c = cmdq_get_client(item);
 	struct client		*tc = cmdq_get_target_client(item);
-	struct client		*ac;
 	struct winlink		*wl = source->wl;
-	struct winlink		*current_wl;
 	struct session		*src_s = source->s;
 	struct session		*dst_s = target->s;
 	struct window_pane	*wp = source->wp;
 	struct window		*w = wl->window, *old_w = w;
 	char			*cause, *cp;
 	int			 idx = target->idx, before, old_idx = wl->idx;
-	int			 detached, local;
 	const char		*template, *name = args_get(args, 'n');
 
 	if (wp == w->modal) {
@@ -121,18 +117,11 @@ cmd_break_pane_exec(struct cmd *self, struct cmdq_item *item)
 	}
 
 	before = args_has(args, 'b');
-	ac = tc;
-	if (ac == NULL || ac->session != dst_s)
-		ac = c;
-	detached = args_has(args, 'd');
-	local = (!detached && active_is_local_window(ac, dst_s));
 	if (args_has(args, 'a') || before) {
 		if (target->wl != NULL)
 			idx = winlink_shuffle_up(dst_s, target->wl, before);
-		else {
-			current_wl = active_get_effective_winlink(ac, dst_s);
-			idx = winlink_shuffle_up(dst_s, current_wl, before);
-		}
+		else
+			idx = winlink_shuffle_up(dst_s, dst_s->curw, before);
 		if (idx == -1)
 			return (CMD_RETURN_ERROR);
 	}
@@ -140,7 +129,7 @@ cmd_break_pane_exec(struct cmd *self, struct cmdq_item *item)
 
 	if (window_count_panes(w, 1) == 1) {
 		if (server_link_window(src_s, wl, dst_s, idx, 0,
-		    !detached && !local, &cause) != 0) {
+		    !args_has(args, 'd'), &cause) != 0) {
 			cmdq_error(item, "%s", cause);
 			free(cause);
 			return (CMD_RETURN_ERROR);
@@ -153,13 +142,6 @@ cmd_break_pane_exec(struct cmd *self, struct cmdq_item *item)
 		wl = winlink_find_by_window(&dst_s->windows, w);
 		if (wl == NULL)
 			return (CMD_RETURN_ERROR);
-		if (local) {
-			active_select_window(ac, dst_s, wl);
-			if (ac != NULL && ac->session == dst_s)
-				cmd_find_from_client(current, ac, 0);
-			if (ac != NULL && ac->session == dst_s)
-				server_redraw_client(ac);
-		}
 		window_fire_pane_moved(wp, old_w, old_idx, w, wl->idx);
 		goto out;
 	}
@@ -203,17 +185,9 @@ cmd_break_pane_exec(struct cmd *self, struct cmdq_item *item)
 	window_remove_ref(w, __func__);
 	events_fire_window("window-created", w);
 	window_fire_pane_moved(wp, old_w, old_idx, w, wl->idx);
-	if (!detached) {
-		if (local)
-			active_select_window(ac, dst_s, wl);
-		else
-			session_select(dst_s, wl->idx);
-		if (local && ac != NULL && ac->session == dst_s)
-			cmd_find_from_client(current, ac, 0);
-		else
-			cmd_find_from_session(current, dst_s, 0);
-		if (local && ac != NULL && ac->session == dst_s)
-			server_redraw_client(ac);
+	if (!args_has(args, 'd')) {
+		session_select(dst_s, wl->idx);
+		cmd_find_from_session(current, dst_s, 0);
 	}
 
 	server_redraw_session(src_s);

cmd-capture-pane.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: cmd-capture-pane.c,v 1.68 2026/07/20 11:16:33 nicm Exp $ */
+/* $OpenBSD: cmd-capture-pane.c,v 1.69 2026/09/08 07:31:59 nicm Exp $ */
 
 /*
  * Copyright (c) 2009 Jonathan Alvarado <radobobo@users.sourceforge.net>
@@ -42,8 +42,8 @@ const struct cmd_entry cmd_capture_pane_entry = {
 	.name = "capture-pane",
 	.alias = "capturep",
 
-	.args = { "ab:CeE:FHJLMNpPqRS:Tt:", 0, 0, NULL },
-	.usage = "[-aCeFHJLMNpPqRT] " CMD_BUFFER_USAGE " [-E end-line] "
+	.args = { "ab:CeE:FHIJLMNpPqRS:Tt:", 0, 0, NULL },
+	.usage = "[-aCeFHIJLMNpPqRT] " CMD_BUFFER_USAGE " [-E end-line] "
 		 "[-S start-line] " CMD_TARGET_PANE_USAGE,
 
 	.target = { 't', CMD_FIND_PANE, 0 },
@@ -200,7 +200,7 @@ cmd_capture_pane_pending(struct args *args, struct window_pane *wp,
 				tmp[0] = line[i];
 				tmp[1] = '\0';
 			} else
-				xsnprintf(tmp, sizeof tmp, "\\%03hho", line[i]);
+				snprintf(tmp, sizeof tmp, "\\%03hho", line[i]);
 			buf = cmd_capture_pane_append(buf, len, tmp,
 			    strlen(tmp));
 		}
@@ -259,7 +259,7 @@ cmd_capture_pane_history(struct args *args, struct cmdq_item *item,
 	struct grid_cell		*gc = NULL;
 	struct window_mode_entry	*wme;
 	int				 n, join_lines, number_lines, flags = 0;
-	int				 show_flags, hyperlinks;
+	int				 show_flags, show_time, hyperlinks;
 	u_int				*links = NULL, nlinks = 0;
 	u_int				 i, sx, top, bottom, tmp;
 	char				*cause, *buf = NULL, *line, b[64], *cp;
@@ -342,6 +342,7 @@ cmd_capture_pane_history(struct args *args, struct cmdq_item *item,
 		flags |= GRID_STRING_TRIM_SPACES;
 	number_lines = args_has(args, 'L');
 	show_flags = args_has(args, 'F');
+	show_time = args_has(args, 'I');
 	hyperlinks = args_has(args, 'H');
 	if (hyperlinks)
 		links = xreallocarray(NULL, gd->sx, sizeof *links);
@@ -358,6 +359,7 @@ cmd_capture_pane_history(struct args *args, struct cmdq_item *item,
 			free(line);
 			continue;
 		}
+		gl = grid_peek_line(gd, i);
 
 		if (number_lines) {
 			if (i >= gd->hsize)
@@ -368,11 +370,16 @@ cmd_capture_pane_history(struct args *args, struct cmdq_item *item,
 			if (n >= 0)
 				buf = cmd_capture_pane_append(buf, len, b, n);
 		}
+		if (show_time) {
+			n = snprintf(b, sizeof b, "%llu ",
+			    (unsigned long long)grid_line_time(gl));
+			if (n >= 0)
+				buf = cmd_capture_pane_append(buf, len, b, n);
+		}
 		if (show_flags) {
 			cp = b;
 			*cp = '\0';
 
-			gl = grid_peek_line(gd, i);
 			if (gl->flags & GRID_LINE_DEAD)
 				*cp++ = 'D';
 			if (gl->flags & GRID_LINE_HYPERLINK)
@@ -393,7 +400,6 @@ cmd_capture_pane_history(struct args *args, struct cmdq_item *item,
 		}
 		buf = cmd_capture_pane_append(buf, len, line, linelen);
 
-		gl = grid_peek_line(gd, i);
 		if (!join_lines || !(gl->flags & GRID_LINE_WRAPPED))
 			buf[(*len)++] = '\n';
 

cmd-display-menu.c

@@ -483,7 +483,7 @@ cmd_display_menu_exec(struct cmd *self, struct cmdq_item *item)
 	char			*title, *cause = NULL;
 	int			 flags = 0, starting_choice = 0;
 	u_int			 px, py, i, count = args_count(args);
-	struct options		*o = target->w->options;
+	struct options		*o = target->s->curw->window->options;
 	struct options_entry	*oe;
 
 	if (args_has(args, 'C')) {
@@ -584,7 +584,7 @@ cmd_display_popup_exec(struct cmd *self, struct cmdq_item *item)
 	u_int			 px, py, w, h, count = args_count(args);
 	struct args_value	*av;
 	struct environ		*env = NULL;
-	struct options		*o = target->w->options;
+	struct options		*o = s->curw->window->options;
 	struct options_entry	*oe;
 
 	if (args_has(args, 'C')) {

cmd-display-message.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: cmd-display-message.c,v 1.65 2026/02/23 08:46:57 nicm Exp $ */
+/* $OpenBSD: cmd-display-message.c,v 1.66 2026/09/08 08:33:10 nicm Exp $ */
 
 /*
  * Copyright (c) 2009 Tiago Cunha <me@tiagocunha.org>
@@ -39,8 +39,8 @@ const struct cmd_entry cmd_display_message_entry = {
 	.name = "display-message",
 	.alias = "display",
 
-	.args = { "aCc:d:lINpt:F:v", 0, 1, NULL },
-	.usage = "[-aCIlNpv] [-c target-client] [-d delay] [-F format] "
+	.args = { "aCc:d:jlINpt:F:v", 0, 1, NULL },
+	.usage = "[-aCIjlNpv] [-c target-client] [-d delay] [-F format] "
 		 CMD_TARGET_PANE_USAGE " [message]",
 
 	.target = { 't', CMD_FIND_PANE, CMD_FIND_CANFAIL },
@@ -67,14 +67,15 @@ cmd_display_message_exec(struct cmd *self, struct cmdq_item *item)
 	struct winlink		*wl = target->wl;
 	struct window_pane	*wp = target->wp;
 	const char		*template;
-	char			*msg, *cause;
+	char			*msg, *cause = NULL;
 	int			 delay = -1, flags, Nflag = args_has(args, 'N');
 	int			 Cflag = args_has(args, 'C');
 	struct format_tree	*ft;
 	u_int			 count = args_count(args);
 	struct evbuffer		*evb;
+	struct json_node	*jn;
 
-	if (args_has(args, 'I')) {
+	if (args_has(args, 'I') && !args_has(args, 'j')) {
 		if (wp == NULL)
 			return (CMD_RETURN_NORMAL);
 		switch (window_pane_start_input(wp, item, &cause)) {
@@ -107,7 +108,9 @@ cmd_display_message_exec(struct cmd *self, struct cmdq_item *item)
 		template = args_string(args, 0);
 	else
 		template = args_get(args, 'F');
-	if (template == NULL)
+	if (args_has(args, 'j') && template == NULL)
+		template = "";
+	else if (template == NULL)
 		template = DISPLAY_MESSAGE_TEMPLATE;
 
 	/*
@@ -129,7 +132,7 @@ cmd_display_message_exec(struct cmd *self, struct cmdq_item *item)
 	ft = format_create(cmdq_get_client(item), item, FORMAT_NONE, flags);
 	format_defaults(ft, c, s, wl, wp);
 
-	if (args_has(args, 'a')) {
+	if (args_has(args, 'a') && !args_has(args, 'j')) {
 		format_each(ft, cmd_display_message_each, item);
 		format_free(ft);
 		return (CMD_RETURN_NORMAL);
@@ -139,6 +142,19 @@ cmd_display_message_exec(struct cmd *self, struct cmdq_item *item)
 		msg = xstrdup(template);
 	else
 		msg = format_expand_time(ft, template);
+	if (args_has(args, 'j')) {
+		jn = json_parse(msg, &cause);
+		if (jn == NULL) {
+			cmdq_error(item, "%s", cause);
+			free(cause);
+			free(msg);
+			format_free(ft);
+			return (CMD_RETURN_ERROR);
+		}
+		free(msg);
+		msg = json_to_string(jn);
+		json_destroy_node(jn);
+	}
 
 	if (cmdq_get_client(item) == NULL)
 		cmdq_error(item, "%s", msg);

cmd-find.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: cmd-find.c,v 1.87 2026/07/17 12:42:51 nicm Exp $ */
+/* $OpenBSD: cmd-find.c,v 1.88 2026/09/07 12:05:12 nicm Exp $ */
 
 /*
  * Copyright (c) 2015 Nicholas Marriott <nicholas.marriott@gmail.com>
@@ -388,9 +388,11 @@ cmd_find_get_window_with_session(struct cmd_find_state *fs, const char *window)
 
 	/* Try as an offset. */
 	if (!exact && (window[0] == '+' || window[0] == '-')) {
-		if (window[1] != '\0')
-			n = strtonum(window + 1, 1, INT_MAX, NULL);
-		else
+		if (window[1] != '\0') {
+			n = strtonum(window + 1, 1, INT_MAX, &errstr);
+			if (errstr != NULL)
+				return (-1);
+		} else
 			n = 1;
 		s = fs->s;
 		if (fs->flags & CMD_FIND_WINDOW_INDEX) {
@@ -626,9 +628,11 @@ cmd_find_get_pane_with_window(struct cmd_find_state *fs, const char *pane)
 
 	/* Try as an offset. */
 	if (pane[0] == '+' || pane[0] == '-') {
-		if (pane[1] != '\0')
-			n = strtonum(pane + 1, 1, INT_MAX, NULL);
-		else
+		if (pane[1] != '\0') {
+			n = strtonum(pane + 1, 1, INT_MAX, &errstr);
+			if (errstr != NULL)
+				return (-1);
+		} else
 			n = 1;
 		wp = fs->w->active;
 		if (pane[0] == '+')
@@ -884,13 +888,13 @@ cmd_find_from_client(struct cmd_find_state *fs, struct client *c, int flags)
 	if (c->session != NULL) {
 		cmd_find_clear_state(fs, flags);
 
-		fs->wl = active_get_effective_winlink(c, c->session);
-		fs->wp = fs->wl->window->active;
+		fs->wp = c->session->curw->window->active;
 		if (fs->wp == NULL) {
 			cmd_find_from_session(fs, c->session, flags);
 			return (0);
 		}
 		fs->s = c->session;
+		fs->wl = fs->s->curw;
 		fs->w = fs->wl->window;
 
 		cmd_find_log_state(__func__, fs);
@@ -931,57 +935,6 @@ unknown_pane:
 	return (cmd_find_from_nothing(fs, flags));
 }
 
-/* Find state from mouse target. */
-static int
-cmd_find_target_from_mouse(struct cmd_find_state *fs, struct cmdq_item *item,
-    enum cmd_find_type type)
-{
-	struct mouse_event	*m = &cmdq_get_event(item)->m;
-	struct client		*c = cmdq_get_client(item);
-	struct client		*tc = cmdq_get_target_client(item);
-
-	switch (type) {
-	case CMD_FIND_PANE:
-		if (m->s != -1 && m->w == -1 && m->wp == -1 &&
-		    (fs->s = session_find_by_id(m->s)) != NULL) {
-			if (tc != NULL && tc->session == fs->s)
-				fs->wl = active_get_effective_winlink(tc, fs->s);
-			else if (c != NULL && c->session == fs->s)
-				fs->wl = active_get_effective_winlink(c, fs->s);
-			else
-				fs->wl = fs->s->curw;
-			if (fs->wl != NULL) {
-				fs->w = fs->wl->window;
-				fs->wp = fs->w->active;
-				break;
-			}
-		}
-		fs->wp = cmd_mouse_pane(m, &fs->s, &fs->wl);
-		if (fs->wp != NULL) {
-			fs->w = fs->wl->window;
-			break;
-		}
-		/* FALLTHROUGH */
-	case CMD_FIND_WINDOW:
-	case CMD_FIND_SESSION:
-		fs->wl = cmd_mouse_window(m, &fs->s);
-		if (fs->s != NULL && m->w == -1 &&
-		    tc != NULL && tc->session == fs->s)
-			fs->wl = active_get_effective_winlink(tc, fs->s);
-		else if (fs->s != NULL && m->w == -1 &&
-		    c != NULL && c->session == fs->s)
-			fs->wl = active_get_effective_winlink(c, fs->s);
-		if (fs->wl == NULL && fs->s != NULL)
-			fs->wl = fs->s->curw;
-		if (fs->wl != NULL) {
-			fs->w = fs->wl->window;
-			fs->wp = fs->w->active;
-		}
-		break;
-	}
-	return (fs->wp == NULL ? -1 : 0);
-}
-
 /*
  * Split target into pieces and resolve for the given type. Fills in the given
  * state. Returns 0 on success or -1 on error.
@@ -990,6 +943,7 @@ int
 cmd_find_target(struct cmd_find_state *fs, struct cmdq_item *item,
     const char *target, enum cmd_find_type type, int flags)
 {
+	struct mouse_event	*m;
 	struct client		*c;
 	struct cmd_find_state	 current;
 	char			*colon, *period, *copy = NULL, tmp[256];
@@ -1065,15 +1019,35 @@ cmd_find_target(struct cmd_find_state *fs, struct cmdq_item *item,
 			cmdq_error(item, "no current client");
 			goto error;
 		}
-		fs->wl = active_get_effective_winlink(c, c->session);
-		fs->wp = fs->wl->window->active;
-		fs->w = fs->wl->window;
+		fs->wl = c->session->curw;
+		fs->wp = c->session->curw->window->active;
+		fs->w = c->session->curw->window;
 		goto found;
 	}
 
 	/* Mouse target is a plain = or {mouse}. */
 	if (strcmp(target, "=") == 0 || strcmp(target, "{mouse}") == 0) {
-		if (cmd_find_target_from_mouse(fs, item, type) != 0) {
+		m = &cmdq_get_event(item)->m;
+		switch (type) {
+		case CMD_FIND_PANE:
+			fs->wp = cmd_mouse_pane(m, &fs->s, &fs->wl);
+			if (fs->wp != NULL) {
+				fs->w = fs->wl->window;
+				break;
+			}
+			/* FALLTHROUGH */
+		case CMD_FIND_WINDOW:
+		case CMD_FIND_SESSION:
+			fs->wl = cmd_mouse_window(m, &fs->s);
+			if (fs->wl == NULL && fs->s != NULL)
+				fs->wl = fs->s->curw;
+			if (fs->wl != NULL) {
+				fs->w = fs->wl->window;
+				fs->wp = fs->w->active;
+			}
+			break;
+		}
+		if (fs->wp == NULL) {
 			if (~flags & CMD_FIND_QUIET)
 				cmdq_error(item, "no mouse target");
 			goto error;

cmd-join-pane.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: cmd-join-pane.c,v 1.74 2026/08/03 20:29:52 nicm Exp $ */
+/* $OpenBSD: cmd-join-pane.c,v 1.75 2026/09/21 10:33:16 nicm Exp $ */
 
 /*
  * Copyright (c) 2011 George Nachman <tmux@georgester.com>
@@ -133,7 +133,7 @@ cmd_join_pane_place(struct cmdq_item *item, struct winlink *wl,
 	} else if (strcmp(position, "back") == 0) {
 		TAILQ_REMOVE(&w->z_index, wp, zentry);
 		TAILQ_FOREACH(owp, &w->z_index, zentry) {
-			if (!window_pane_is_floating(owp))
+			if (!window_pane_is_floating_with_hidden(owp))
 				break;
 		}
 		if (owp != NULL)
@@ -142,24 +142,30 @@ cmd_join_pane_place(struct cmdq_item *item, struct winlink *wl,
 			TAILQ_INSERT_TAIL(&w->z_index, wp, zentry);
 	} else if (strcmp(position, "forward") == 0) {
 		owp = TAILQ_PREV(wp, window_panes_zindex, zentry);
+		while (owp != NULL && owp->layout_cell == NULL)
+			owp = TAILQ_PREV(owp, window_panes_zindex, zentry);
 		if (owp != NULL) {
 			TAILQ_REMOVE(&w->z_index, wp, zentry);
 			TAILQ_INSERT_BEFORE(owp, wp, zentry);
 		}
 	} else if (strcmp(position, "backward") == 0) {
 		owp = TAILQ_NEXT(wp, zentry);
+		while (owp != NULL && owp->layout_cell == NULL)
+			owp = TAILQ_NEXT(owp, zentry);
 		if (owp != NULL && window_pane_is_floating(owp)) {
 			TAILQ_REMOVE(&w->z_index, wp, zentry);
 			TAILQ_INSERT_AFTER(&w->z_index, owp, wp, zentry);
 		}
 	} else if (strcmp(position, "forward-loop") == 0) {
 		owp = TAILQ_PREV(wp, window_panes_zindex, zentry);
+		while (owp != NULL && owp->layout_cell == NULL)
+			owp = TAILQ_PREV(owp, window_panes_zindex, zentry);
 		TAILQ_REMOVE(&w->z_index, wp, zentry);
 		if (owp != NULL)
 			TAILQ_INSERT_BEFORE(owp, wp, zentry);
 		else {
 			TAILQ_FOREACH(owp, &w->z_index, zentry) {
-				if (!window_pane_is_floating(owp))
+				if (!window_pane_is_floating_with_hidden(owp))
 					break;
 			}
 			if (owp != NULL)
@@ -169,6 +175,8 @@ cmd_join_pane_place(struct cmdq_item *item, struct winlink *wl,
 		}
 	} else if (strcmp(position, "backward-loop") == 0) {
 		owp = TAILQ_NEXT(wp, zentry);
+		while (owp != NULL && owp->layout_cell == NULL)
+			owp = TAILQ_NEXT(owp, zentry);
 		if (owp != NULL && window_pane_is_floating(owp)) {
 			TAILQ_REMOVE(&w->z_index, wp, zentry);
 			TAILQ_INSERT_AFTER(&w->z_index, owp, wp, zentry);
@@ -347,8 +355,10 @@ cmd_join_pane_zindex(struct cmdq_item *item, struct winlink *wl,
 
 	n = 0;
 	TAILQ_FOREACH(owp, &w->z_index, zentry) {
-		if (!window_pane_is_floating(owp))
+		if (!window_pane_is_floating_with_hidden(owp))
 			break;
+		if (owp->layout_cell == NULL)
+			continue;
 		if (n >= z)
 			break;
 		n++;
@@ -413,16 +423,13 @@ cmd_join_pane_exec(struct cmd *self, struct cmdq_item *item)
 	struct cmd_find_state	*current = cmdq_get_current(item);
 	struct cmd_find_state	*target = cmdq_get_target(item);
 	struct cmd_find_state	*source = cmdq_get_source(item);
-	struct client		*c = cmdq_get_client(item);
-	struct client		*tc = cmdq_get_target_client(item);
-	struct client		*ac;
 	struct session		*dst_s;
 	struct winlink		*src_wl, *dst_wl;
 	struct window		*src_w, *dst_w;
 	struct window_pane	*src_wp, *dst_wp;
 	const char		*s;
 	char			*cause = NULL;
-	int			 flags = 0, dst_idx, local;
+	int			 flags = 0, dst_idx;
 	struct layout_cell	*lc;
 
 	dst_s = target->s;
@@ -430,10 +437,6 @@ cmd_join_pane_exec(struct cmd *self, struct cmdq_item *item)
 	dst_wp = target->wp;
 	dst_w = dst_wl->window;
 	dst_idx = dst_wl->idx;
-	ac = tc;
-	if (ac == NULL || ac->session != dst_s)
-		ac = c;
-	local = active_is_local_window(ac, dst_s);
 
 	if (cmd_get_entry(self) == &cmd_move_pane_entry) {
 		if (args_has(args, 'M'))
@@ -450,7 +453,6 @@ cmd_join_pane_exec(struct cmd *self, struct cmdq_item *item)
 				cmdq_error(item, "pane is not floating");
 				return (CMD_RETURN_ERROR);
 			}
-			server_unzoom_window(dst_w);
 			if ((s = args_get(args, 'P')) != NULL)
 				return (cmd_join_pane_place(item, dst_wl, dst_wp, s));
 			if ((s = args_get(args, 'z')) != NULL)
@@ -519,18 +521,9 @@ cmd_join_pane_exec(struct cmd *self, struct cmdq_item *item)
 
 	if (!args_has(args, 'd')) {
 		window_set_active_pane(dst_w, src_wp, 1);
-		if (local)
-			active_select_window(ac, dst_s, dst_wl);
-		else
-			session_select(dst_s, dst_idx);
-		if (local && ac != NULL && ac->session == dst_s)
-			cmd_find_from_client(current, ac, 0);
-		else
-			cmd_find_from_session(current, dst_s, 0);
-		if (local && ac != NULL && ac->session == dst_s)
-			server_redraw_client(ac);
-		else
-			server_redraw_session(dst_s);
+		session_select(dst_s, dst_idx);
+		cmd_find_from_session(current, dst_s, 0);
+		server_redraw_session(dst_s);
 	} else
 		server_status_session(dst_s);
 

cmd-list-panes.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: cmd-list-panes.c,v 1.40 2026/06/01 14:01:09 nicm Exp $ */
+/* $OpenBSD: cmd-list-panes.c,v 1.41 2026/09/08 10:20:08 nicm Exp $ */
 
 /*
  * Copyright (c) 2009 Nicholas Marriott <nicholas.marriott@gmail.com>
@@ -97,6 +97,7 @@ cmd_list_panes_window(struct cmd *self, struct session *s, struct winlink *wl,
     struct cmdq_item *item, int type)
 {
 	struct args		*args = cmd_get_args(self);
+	struct client		*c = cmdq_get_client(item);
 	struct window_pane	*wp, **l;
 	u_int			 i, n;
 	struct format_tree	*ft;
@@ -147,7 +148,7 @@ cmd_list_panes_window(struct cmd *self, struct session *s, struct winlink *wl,
 		wp = l[i];
 		ft = format_create(cmdq_get_client(item), item, FORMAT_NONE, 0);
 		format_add(ft, "line", "%u", n);
-		format_defaults(ft, NULL, s, wl, wp);
+		format_defaults(ft, c, s, wl, wp);
 
 		if (filter != NULL) {
 			expanded = format_expand(ft, filter);

cmd-list-sessions.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: cmd-list-sessions.c,v 1.36 2026/02/27 08:25:12 nicm Exp $ */
+/* $OpenBSD: cmd-list-sessions.c,v 1.37 2026/09/08 10:20:08 nicm Exp $ */
 
 /*
  * Copyright (c) 2007 Nicholas Marriott <nicholas.marriott@gmail.com>
@@ -53,6 +53,7 @@ static enum cmd_retval
 cmd_list_sessions_exec(struct cmd *self, struct cmdq_item *item)
 {
 	struct args		 *args = cmd_get_args(self);
+	struct client		 *c = cmdq_get_client(item);
 	struct session		**l;
 	u_int		 	  n, i;
 	struct format_tree	 *ft;
@@ -76,7 +77,7 @@ cmd_list_sessions_exec(struct cmd *self, struct cmdq_item *item)
 	for (i = 0; i < n; i++) {
 		ft = format_create(cmdq_get_client(item), item, FORMAT_NONE, 0);
 		format_add(ft, "line", "%u", i);
-		format_defaults(ft, NULL, l[i], NULL, NULL);
+		format_defaults(ft, c, l[i], NULL, NULL);
 
 		if (filter != NULL) {
 			expanded = format_expand(ft, filter);

cmd-list-windows.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: cmd-list-windows.c,v 1.50 2026/02/27 08:25:12 nicm Exp $ */
+/* $OpenBSD: cmd-list-windows.c,v 1.51 2026/09/08 10:20:08 nicm Exp $ */
 
 /*
  * Copyright (c) 2007 Nicholas Marriott <nicholas.marriott@gmail.com>
@@ -60,6 +60,7 @@ cmd_list_windows_exec(struct cmd *self, struct cmdq_item *item)
 {
 	struct args		*args = cmd_get_args(self);
 	struct cmd_find_state	*target = cmdq_get_target(item);
+	struct client		*c = cmdq_get_client(item);
 	struct winlink		*wl, **l;
 	struct session		*s;
 	u_int			 i, n;
@@ -94,7 +95,7 @@ cmd_list_windows_exec(struct cmd *self, struct cmdq_item *item)
 		s = wl->session;
 		ft = format_create(cmdq_get_client(item), item, FORMAT_NONE, 0);
 		format_add(ft, "line", "%u", n);
-		format_defaults(ft, NULL, s, wl, NULL);
+		format_defaults(ft, c, s, wl, NULL);
 
 		if (filter != NULL) {
 			expanded = format_expand(ft, filter);

cmd-move-window.c

@@ -62,15 +62,12 @@ cmd_move_window_exec(struct cmd *self, struct cmdq_item *item)
 	struct args		*args = cmd_get_args(self);
 	struct cmd_find_state	*source = cmdq_get_source(item);
 	struct cmd_find_state	 target;
-	struct client		*c = cmdq_get_client(item);
-	struct client		*tc = cmdq_get_target_client(item);
-	struct client		*ac;
 	const char		*tflag = args_get(args, 't');
 	struct session		*src = source->s;
 	struct session		*dst;
-	struct winlink		*wl = source->wl, *dstwl, *current_wl;
+	struct winlink		*wl = source->wl;
 	char			*cause;
-	int			 idx, kflag, dflag, sflag, before, local;
+	int			 idx, kflag, dflag, sflag, before;
 
 	if (args_has(args, 'r')) {
 		if (cmd_find_target(&target, item, tflag, CMD_FIND_SESSION,
@@ -93,37 +90,23 @@ cmd_move_window_exec(struct cmd *self, struct cmdq_item *item)
 	dflag = args_has(args, 'd');
 	sflag = args_has(args, 's');
 
-	ac = tc;
-	if (ac == NULL || ac->session != dst)
-		ac = c;
-	local = (!dflag && active_is_local_window(ac, dst));
-
 	before = args_has(args, 'b');
 	if (args_has(args, 'a') || before) {
 		if (target.wl != NULL)
 			idx = winlink_shuffle_up(dst, target.wl, before);
-		else {
-			current_wl = active_get_effective_winlink(ac, dst);
-			idx = winlink_shuffle_up(dst, current_wl, before);
-		}
+		else
+			idx = winlink_shuffle_up(dst, dst->curw, before);
 		if (idx == -1)
 			return (CMD_RETURN_ERROR);
 	}
 
-	if (server_link_window(src, wl, dst, idx, kflag, !dflag && !local,
-	    &cause) != 0) {
+	if (server_link_window(src, wl, dst, idx, kflag, !dflag, &cause) != 0) {
 		cmdq_error(item, "%s", cause);
 		free(cause);
 		return (CMD_RETURN_ERROR);
 	}
-	dstwl = winlink_find_by_window(&dst->windows, wl->window);
 	if (cmd_get_entry(self) == &cmd_move_window_entry)
 		server_unlink_window(src, wl);
-	if (local && dstwl != NULL) {
-		active_select_window(ac, dst, dstwl);
-		if (ac != NULL && ac->session == dst)
-			server_redraw_client(ac);
-	}
 
 	/*
 	 * Renumber the winlinks in the src session only, the destination

cmd-new-window.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: cmd-new-window.c,v 1.103 2026/07/08 08:07:42 nicm Exp $ */
+/* $OpenBSD: cmd-new-window.c,v 1.104 2026/09/03 21:04:11 nicm Exp $ */
 
 /*
  * Copyright (c) 2007 Nicholas Marriott <nicholas.marriott@gmail.com>
@@ -58,11 +58,10 @@ cmd_new_window_exec(struct cmd *self, struct cmdq_item *item)
 	struct cmd_find_state	*target = cmdq_get_target(item);
 	struct spawn_context	 sc = { 0 };
 	struct client		*tc = cmdq_get_target_client(item);
-	struct client		*ac;
 	struct session		*s = target->s;
 	struct winlink		*wl = target->wl, *new_wl = NULL;
-	int			 idx = target->idx, before, count = args_count(args);
-	int			 detached, local;
+	int			 idx = target->idx, before;
+	int			 count = args_count(args);
 	char			*cause = NULL, *cp, *expanded, *wname = NULL;
 	const char		*template, *name;
 	struct cmd_find_state	 fs;
@@ -76,8 +75,10 @@ cmd_new_window_exec(struct cmd *self, struct cmdq_item *item)
 	}
 
 	/*
-	 * If -S and -n are given and -t is not and a single window with this
-	 * name already exists, select it.
+	 * If -S is given, select an existing window instead of creating a
+	 * new one: preferring -t if it already points at a window, or
+	 * otherwise -n if one exists with that name. If neither matches,
+	 * fall through and create a window as normal.
 	 */
 	name = args_get(args, 'n');
 	if (name != NULL) {
@@ -90,37 +91,39 @@ cmd_new_window_exec(struct cmd *self, struct cmdq_item *item)
 		wname = clean_name(expanded, 0);
 		free(expanded);
 	}
-	if (args_has(args, 'S') && wname != NULL && target->idx == -1) {
-		expanded = format_single(item, wname, c, s, NULL, NULL);
-		RB_FOREACH(wl, winlinks, &s->windows) {
-			if (strcmp(wl->window->name, expanded) != 0)
-				continue;
-			if (new_wl == NULL) {
-				new_wl = wl;
-				continue;
+	if (args_has(args, 'S')) {
+		if (idx != -1)
+			new_wl = winlink_find_by_index(&s->windows, idx);
+		else if (wname != NULL) {
+			expanded = format_single(item, wname, c, s, NULL, NULL);
+			RB_FOREACH(wl, winlinks, &s->windows) {
+				if (strcmp(wl->window->name, expanded) != 0)
+					continue;
+				if (new_wl == NULL) {
+					new_wl = wl;
+					continue;
+				}
+				cmdq_error(item, "multiple windows named %s",
+				    wname);
+				free(wname);
+				free(expanded);
+				return (CMD_RETURN_ERROR);
 			}
-			cmdq_error(item, "multiple windows named %s", wname);
-			free(wname);
 			free(expanded);
-			return (CMD_RETURN_ERROR);
 		}
-		free(expanded);
-		if (new_wl != NULL) {
-			free(wname);
-			if (args_has(args, 'd'))
-				return (CMD_RETURN_NORMAL);
-			if (active_select_window(c, s, new_wl) == 0) {
-				if (active_is_local_window(c, s) && c != NULL &&
-				    c->session == s)
-					server_redraw_client(c);
-				else
-					server_redraw_session(s);
-			}
-			if (c != NULL && c->session != NULL)
-				active_get_effective_window(c, s)->latest = c;
-			recalculate_sizes();
+	}
+
+	/* Found an existing window to select instead of creating a new one. */
+	if (new_wl != NULL) {
+		free(wname);
+		if (args_has(args, 'd'))
 			return (CMD_RETURN_NORMAL);
-		}
+		if (session_set_current(s, new_wl) == 0)
+			server_redraw_session(s);
+		if (c != NULL && c->session != NULL)
+			s->curw->window->latest = c;
+		recalculate_sizes();
+		return (CMD_RETURN_NORMAL);
 	}
 
 	before = args_has(args, 'b');
@@ -147,16 +150,10 @@ cmd_new_window_exec(struct cmd *self, struct cmdq_item *item)
 	sc.idx = idx;
 	sc.cwd = args_get(args, 'c');
 
-	ac = tc;
-	if (ac == NULL || ac->session != s)
-		ac = c;
-	detached = args_has(args, 'd');
-	local = (!detached && active_is_local_window(ac, s));
-
 	sc.flags = 0;
 	if (args_has(args, 'E') || (count == 1 && *args_string(args, 0) == '\0'))
 		sc.flags |= SPAWN_EMPTY;
-	if (detached || local)
+	if (args_has(args, 'd'))
 		sc.flags |= SPAWN_DETACHED;
 	if (args_has(args, 'k'))
 		sc.flags |= SPAWN_KILL;
@@ -166,13 +163,7 @@ cmd_new_window_exec(struct cmd *self, struct cmdq_item *item)
 		free(cause);
 		goto fail;
 	}
-	if (local) {
-		if (active_select_window(ac, s, new_wl) == 0)
-			cmd_find_from_winlink(current, new_wl, 0);
-		if (ac != NULL && ac->session == s)
-			server_redraw_client(ac);
-		server_status_session_group(s);
-	} else if (!detached || new_wl == s->curw) {
+	if (!args_has(args, 'd') || new_wl == s->curw) {
 		cmd_find_from_winlink(current, new_wl, 0);
 		server_redraw_session_group(s);
 	} else

cmd-parse.y

@@ -1,4 +1,4 @@
-/* $OpenBSD: cmd-parse.y,v 1.59 2026/08/31 07:51:56 nicm Exp $ */
+/* $OpenBSD: cmd-parse.y,v 1.60 2026/09/08 10:20:08 nicm Exp $ */
 
 /*
  * Copyright (c) 2019 Nicholas Marriott <nicholas.marriott@gmail.com>
@@ -210,7 +210,7 @@ expanded	: format
 				cmd_find_from_client(&fs, c, 0);
 				fsp = &fs;
 			}
-			ft = format_create(NULL, pi->item, FORMAT_NONE, flags);
+			ft = format_create(c, pi->item, FORMAT_NONE, flags);
 			format_defaults(ft, c, fsp->s, fsp->wl, fsp->wp);
 
 			$$ = format_expand(ft, $1);

cmd-queue.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: cmd-queue.c,v 1.123 2026/08/24 20:34:26 nicm Exp $ */
+/* $OpenBSD: cmd-queue.c,v 1.124 2026/09/22 06:46:50 nicm Exp $ */
 
 /*
  * Copyright (c) 2013 Nicholas Marriott <nicholas.marriott@gmail.com>
@@ -580,6 +580,9 @@ cmdq_fire_command(struct cmdq_item *item)
 	int			 flags, quiet = 0;
 	char			*tmp;
 
+	if (item->client != NULL && (item->client->flags & CLIENT_DEAD))
+		return (CMD_RETURN_ERROR);
+
 	if (cfg_finished)
 		cmdq_add_message(item);
 	if (log_get_level() > 1) {

cmd-refresh-client.c

@@ -203,7 +203,7 @@ cmd_refresh_client_exec(struct cmd *self, struct cmdq_item *item)
 		if (args_has(args, 'c'))
 			tc->pan_window = NULL;
 		else {
-			w = active_get_effective_window(tc, tc->session);
+			w = tc->session->curw->window;
 			if (tc->pan_window != w) {
 				tc->pan_window = w;
 				tc->pan_ox = tty->oox;

cmd-resize-pane.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: cmd-resize-pane.c,v 1.68 2026/08/31 07:44:39 nicm Exp $ */
+/* $OpenBSD: cmd-resize-pane.c,v 1.69 2026/09/21 10:33:16 nicm Exp $ */
 
 /*
  * Copyright (c) 2009 Nicholas Marriott <nicholas.marriott@gmail.com>
@@ -91,7 +91,8 @@ cmd_resize_pane_exec(struct cmd *self, struct cmdq_item *item)
 		server_redraw_window(w);
 		return (CMD_RETURN_NORMAL);
 	}
-	server_unzoom_window(w);
+	if (!window_pane_is_floating(wp))
+		server_unzoom_window(w);
 	lc = wp->layout_cell; /* may have been replaced by unzoom */
 
 	if (args_has(args, 'x')) {

cmd-run-shell.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: cmd-run-shell.c,v 1.94 2026/08/25 06:04:33 nicm Exp $ */
+/* $OpenBSD: cmd-run-shell.c,v 1.95 2026/09/20 07:59:55 nicm Exp $ */
 
 /*
  * Copyright (c) 2009 Tiago Cunha <me@tiagocunha.org>
@@ -79,10 +79,7 @@ static void
 cmd_run_shell_print(struct job *job, const char *msg)
 {
 	struct cmd_run_shell_data	*cdata = job_get_data(job);
-	struct client			*c;
-	struct session			*s;
 	struct window_pane		*wp = NULL;
-	struct window			*w;
 	struct cmd_find_state		 fs;
 	struct window_mode_entry	*wme;
 
@@ -93,12 +90,8 @@ cmd_run_shell_print(struct job *job, const char *msg)
 			cmdq_print(cdata->item, "%s", msg);
 			return;
 		}
-		c = cdata->client;
-		if (c != NULL && c->session != NULL) {
-			s = c->session;
-			w = active_get_effective_window(c, s);
-			wp = w->active;
-		}
+		if (cdata->client != NULL && cdata->client->session != NULL)
+			wp = cdata->client->session->curw->window->active;
 		if (wp == NULL && cmd_find_from_nothing(&fs, 0) == 0)
 			wp = fs.wp;
 		if (wp == NULL)
@@ -171,7 +164,7 @@ cmd_run_shell_exec(struct cmd *self, struct cmdq_item *item)
 	if (cdata->client != NULL)
 		cdata->client->references++;
 	if (args_has(args, 'c'))
-		cdata->cwd = xstrdup(args_get(args, 'c'));
+		cdata->cwd = format_single_from_target(item, args_get(args, 'c'));
 	else
 		cdata->cwd = xstrdup(server_client_get_cwd(c, s));
 

cmd-select-layout.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: cmd-select-layout.c,v 1.43 2026/07/10 13:38:45 nicm Exp $ */
+/* $OpenBSD: cmd-select-layout.c,v 1.45 2026/09/09 07:03:39 nicm Exp $ */
 
 /*
  * Copyright (c) 2009 Nicholas Marriott <nicholas.marriott@gmail.com>
@@ -73,12 +73,13 @@ cmd_select_layout_exec(struct cmd *self, struct cmdq_item *item)
 {
 	struct args		*args = cmd_get_args(self);
 	struct cmd_find_state	*target = cmdq_get_target(item);
+	struct client		*c = cmdq_get_target_client(item);
 	struct winlink		*wl = target->wl;
 	struct window		*w = wl->window;
 	struct window_pane	*wp = target->wp;
 	const char		*layoutname;
-	char			*oldlayout, *cause;
-	int			 next, previous, layout;
+	char			*oldlayout, *cause = NULL;
+	int			 next, previous, layout, flags = 0;
 
 	server_unzoom_window(w);
 
@@ -89,8 +90,12 @@ cmd_select_layout_exec(struct cmd *self, struct cmdq_item *item)
 	if (args_has(args, 'p'))
 		previous = 1;
 
+	if (c != NULL &&
+	    (c->flags & CLIENT_CONTROL) &&
+	    (~c->flags & CLIENT_CONTROL_NEWLAYOUTS))
+		flags |= LAYOUT_CUSTOM_OLD_FORMAT;
 	oldlayout = w->old_layout;
-	w->old_layout = layout_dump(w, w->layout_root);
+	w->old_layout = layout_dump(w, w->layout_root, flags);
 
 	if (next || previous) {
 		if (next)

cmd-select-pane.c

@@ -68,11 +68,10 @@ cmd_select_pane_redraw(struct window *w)
 	TAILQ_FOREACH(c, &clients, entry) {
 		if (c->session == NULL || (c->flags & CLIENT_CONTROL))
 			continue;
-		if (active_get_effective_window(c, c->session) == w &&
-		    tty_window_bigger(&c->tty))
+		if (c->session->curw->window == w && tty_window_bigger(&c->tty))
 			server_redraw_client(c);
 		else {
-			if (active_get_effective_window(c, c->session) == w)
+			if (c->session->curw->window == w)
 				c->flags |= CLIENT_REDRAWBORDERS;
 			if (session_has(c->session, w))
 				c->flags |= CLIENT_REDRAWSTATUS;

cmd-select-window.c

@@ -33,8 +33,8 @@ const struct cmd_entry cmd_select_window_entry = {
 	.name = "select-window",
 	.alias = "selectw",
 
-	.args = { "LlSnpTt:", 0, 0, NULL },
-	.usage = "[-LlnpST] " CMD_TARGET_WINDOW_USAGE,
+	.args = { "lnpTt:", 0, 0, NULL },
+	.usage = "[-lnpT] " CMD_TARGET_WINDOW_USAGE,
 
 	.target = { 't', CMD_FIND_WINDOW, 0 },
 
@@ -88,9 +88,8 @@ cmd_select_window_exec(struct cmd *self, struct cmdq_item *item)
 	struct client		*c = cmdq_get_client(item);
 	struct cmd_find_state	*current = cmdq_get_current(item);
 	struct cmd_find_state	*target = cmdq_get_target(item);
-	struct winlink		*wl = target->wl, *current_wl;
+	struct winlink		*wl = target->wl;
 	struct session		*s = target->s;
-	enum active_window_mode	 mode;
 	int			 next, previous, last, activity;
 
 	next = (cmd_get_entry(self) == &cmd_next_window_entry);
@@ -103,104 +102,48 @@ cmd_select_window_exec(struct cmd *self, struct cmdq_item *item)
 	if (args_has(args, 'l'))
 		last = 1;
 
-	if (args_has(args, 'L') || args_has(args, 'S')) {
-		if (c == NULL || c->session == NULL) {
-			cmdq_error(item, "no current client");
-			return (CMD_RETURN_ERROR);
-		}
-		if (args_has(args, 'S'))
-			mode = ACTIVE_SHARED;
-		else
-			mode = ACTIVE_LOCAL;
-		active_set_local_window(c, s, mode);
-		if (!next &&
-		    !previous &&
-		    !last &&
-		    !args_has(args, 't') &&
-		    !args_has(args, 'T')) {
-			if (current->s == s) {
-				if (c->session == s)
-					cmd_find_from_client(current, c, 0);
-				else
-					cmd_find_from_session(current, s, 0);
-			}
-			if (c->session == s)
-				server_redraw_client(c);
-			else
-				server_redraw_session(s);
-			cmdq_insert_hook(s, item, current, "after-select-window");
-			recalculate_sizes();
-			return (CMD_RETURN_NORMAL);
-		}
-	}
-
-	if (active_is_local_window(c, s))
-		mode = ACTIVE_LOCAL;
-	else
-		mode = ACTIVE_SHARED;
 	if (next || previous || last) {
 		activity = args_has(args, 'a');
 		if (next) {
-			if (active_next_window(c, s, activity) != 0) {
+			if (session_next(s, activity) != 0) {
 				cmdq_error(item, "no next window");
 				return (CMD_RETURN_ERROR);
 			}
 		} else if (previous) {
-			if (active_previous_window(c, s, activity) != 0) {
+			if (session_previous(s, activity) != 0) {
 				cmdq_error(item, "no previous window");
 				return (CMD_RETURN_ERROR);
 			}
 		} else {
-			if (active_last_window(c, s) != 0) {
+			if (session_last(s) != 0) {
 				cmdq_error(item, "no last window");
 				return (CMD_RETURN_ERROR);
 			}
 		}
-		if (mode == ACTIVE_LOCAL && c != NULL && c->session == s)
-			cmd_find_from_client(current, c, 0);
-		else
-			cmd_find_from_session(current, s, 0);
-		if (mode == ACTIVE_LOCAL && c != NULL && c->session == s)
-			server_redraw_client(c);
-		else
-			server_redraw_session(s);
+		cmd_find_from_session(current, s, 0);
+		server_redraw_session(s);
 		cmdq_insert_hook(s, item, current, "after-select-window");
 	} else {
 		/*
 		 * If -T and select-window is invoked on same window as
 		 * current, switch to previous window.
 		 */
-		current_wl = active_get_effective_winlink(c, s);
-		if (args_has(args, 'T') && wl == current_wl) {
-			if (active_last_window(c, s) != 0) {
+		if (args_has(args, 'T') && wl == s->curw) {
+			if (session_last(s) != 0) {
 				cmdq_error(item, "no last window");
 				return (-1);
 			}
-			if (current->s == s) {
-				if (mode == ACTIVE_LOCAL && c != NULL &&
-				    c->session == s)
-					cmd_find_from_client(current, c, 0);
-				else
-					cmd_find_from_session(current, s, 0);
-			}
-			if (mode == ACTIVE_LOCAL && c != NULL && c->session == s)
-				server_redraw_client(c);
-			else
-				server_redraw_session(s);
-		} else if (active_select_window(c, s, wl) == 0) {
-			if (mode == ACTIVE_LOCAL && c != NULL && c->session == s)
-				cmd_find_from_client(current, c, 0);
-			else
+			if (current->s == s)
 				cmd_find_from_session(current, s, 0);
-			if (mode == ACTIVE_LOCAL && c != NULL && c->session == s)
-				server_redraw_client(c);
-			else
-				server_redraw_session(s);
+			server_redraw_session(s);
+		} else if (session_select(s, wl->idx) == 0) {
+			cmd_find_from_session(current, s, 0);
+			server_redraw_session(s);
 		}
 		cmdq_insert_hook(s, item, current, "after-select-window");
 	}
 	if (c != NULL && c->session != NULL)
-		active_get_effective_window(c, s)->latest = c;
+		s->curw->window->latest = c;
 	recalculate_sizes();
 
 	return (CMD_RETURN_NORMAL);

cmd-split-window.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: cmd-split-window.c,v 1.150 2026/08/20 09:19:24 nicm Exp $ */
+/* $OpenBSD: cmd-split-window.c,v 1.151 2026/09/10 11:02:18 nicm Exp $ */
 
 /*
  * Copyright (c) 2009 Nicholas Marriott <nicholas.marriott@gmail.com>
@@ -40,8 +40,8 @@ const struct cmd_entry cmd_new_pane_entry = {
 	.name = "new-pane",
 	.alias = "newp",
 
-	.args = { "AbB:Cc:de:EfF:hIkl:KLMm:Op:PR:s:S:t:T:vWx:X:y:Y:Z", 0, -1, NULL },
-	.usage = "[-AbCdefhIkKLMOPvWZ] [-B border-lines] "
+	.args = { "AbB:Cc:Dde:EfF:hIkl:KLMm:Op:PR:s:S:t:T:vWx:X:y:Y:Z", 0, -1, NULL },
+	.usage = "[-AbCDefhIkKLMOPvWZ] [-B border-lines] "
 		 "[-c start-directory] [-e environment] "
 		 "[-F format] [-l size] [-m message] [-p percentage] "
 		 "[-s style] [-S active-border-style] "
@@ -219,6 +219,8 @@ cmd_split_window_exec(struct cmd *self, struct cmdq_item *item)
 		new_wp->flags |= PANE_CAPTUREALLKEYS;
 	if (args_has(args, 'C') && args_has(args, 'O'))
 		new_wp->flags |= PANE_CLOSEONCLICK;
+	if (args_has(args, 'D') && args_has(args, 'O'))
+		new_wp->flags |= PANE_CLOSEONCANCEL;
 
 	style = args_get(args, 's');
 	if (style != NULL) {

cmd-swap-window.c

@@ -48,14 +48,10 @@ cmd_swap_window_exec(struct cmd *self, struct cmdq_item *item)
 	struct args		*args = cmd_get_args(self);
 	struct cmd_find_state	*source = cmdq_get_source(item);
 	struct cmd_find_state	*target = cmdq_get_target(item);
-	struct client		*c = cmdq_get_client(item);
-	struct client		*tc = cmdq_get_target_client(item);
-	struct client		*ac;
 	struct session		*src = source->s, *dst = target->s;
 	struct session_group	*sg_src, *sg_dst;
 	struct winlink		*wl_src = source->wl, *wl_dst = target->wl;
 	struct window		*w_src, *w_dst;
-	int			 local_src, local_dst;
 
 	sg_src = session_group_contains(src);
 	sg_dst = session_group_contains(dst);
@@ -83,22 +79,10 @@ cmd_swap_window_exec(struct cmd *self, struct cmdq_item *item)
 
 	if (marked_pane.wl == wl_src)
 		marked_pane.wl = wl_dst;
-	ac = tc;
-	if (ac == NULL)
-		ac = c;
-	local_dst = active_is_local_window(ac, dst);
-	local_src = active_is_local_window(ac, src);
 	if (args_has(args, 'd')) {
-		if (local_dst)
-			active_select_window(ac, dst, wl_dst);
-		else
-			session_select(dst, wl_dst->idx);
-		if (src != dst) {
-			if (local_src)
-				active_select_window(ac, src, wl_src);
-			else
-				session_select(src, wl_src->idx);
-		}
+		session_select(dst, wl_dst->idx);
+		if (src != dst)
+			session_select(src, wl_src->idx);
 	}
 	session_group_synchronize_from(src);
 	server_redraw_session_group(src);

cmd-switch-client.c

@@ -53,12 +53,11 @@ cmd_switch_client_exec(struct cmd *self, struct cmdq_item *item)
 	struct cmd_find_state	 target;
 	const char		*tflag = args_get(args, 't');
 	enum cmd_find_type	 type;
-	int			 flags, visible, window_target;
-	int			 Zflag = args_has(args, 'Z');
+	int			 flags, visible, Zflag = args_has(args, 'Z');
 	struct client		*c = cmdq_get_client(item);
 	struct client		*tc = cmdq_get_target_client(item);
 	struct session		*s;
-	struct winlink		*wl, *current_wl;
+	struct winlink		*wl;
 	struct window		*w;
 	struct window_pane	*wp;
 	const char		*tablename;
@@ -66,13 +65,8 @@ cmd_switch_client_exec(struct cmd *self, struct cmdq_item *item)
 	struct sort_criteria	 sort_crit;
 	uid_t			 uid;
 
-	window_target = 0;
-	if (tflag != NULL) {
-		if (tflag[strcspn(tflag, ":.%")] != '\0' ||
-		    strcmp(tflag, "=") == 0)
-			window_target = 1;
-	}
-	if (window_target) {
+	if (tflag != NULL &&
+	    (tflag[strcspn(tflag, ":.%")] != '\0' || strcmp(tflag, "=") == 0)) {
 		type = CMD_FIND_PANE;
 		flags = 0;
 	} else {
@@ -143,8 +137,7 @@ cmd_switch_client_exec(struct cmd *self, struct cmdq_item *item)
 	} else {
 		if (cmdq_get_client(item) == NULL)
 			return (CMD_RETURN_NORMAL);
-		if (window_target && wl != NULL && wp != NULL &&
-		    wp != wl->window->active) {
+		if (wl != NULL && wp != NULL && wp != wl->window->active) {
 			w = wl->window;
 			if (w->modal != NULL && wp != w->modal)
 				visible = 1;
@@ -157,13 +150,9 @@ cmd_switch_client_exec(struct cmd *self, struct cmdq_item *item)
 			if (!visible && window_pop_zoom(w))
 				server_redraw_window(w);
 		}
-		if (window_target && wl != NULL) {
-			active_select_window(tc, s, wl);
-			if (active_is_local_window(tc, s)) {
-				current_wl = active_get_effective_winlink(tc, s);
-				cmd_find_from_winlink(current, current_wl, 0);
-			} else
-				cmd_find_from_session(current, s, 0);
+		if (wl != NULL) {
+			session_set_current(s, wl);
+			cmd_find_from_session(current, s, 0);
 		}
 	}
 

cmd-wait-for.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: cmd-wait-for.c,v 1.23 2026/07/10 13:38:45 nicm Exp $ */
+/* $OpenBSD: cmd-wait-for.c,v 1.24 2026/09/22 06:46:50 nicm Exp $ */
 
 /*
  * Copyright (c) 2013 Nicholas Marriott <nicholas.marriott@gmail.com>
@@ -480,6 +480,40 @@ cmd_wait_for_unlock(struct cmdq_item *item, const char *name,
 	return (CMD_RETURN_NORMAL);
 }
 
+void
+cmd_wait_for_client_lost(struct client *c)
+{
+	struct wait_channel	*wc, *wc1;
+	struct wait_item	*wi, *wi1;
+	struct wait_event_item	*wei, *wei1;
+
+	TAILQ_FOREACH_SAFE(wei, &wait_event_items, entry, wei1) {
+		if (cmdq_get_client(wei->item) == c) {
+			TAILQ_REMOVE(&wait_event_items, wei, entry);
+			cmdq_continue(wei->item);
+			cmd_wait_for_event_free(wei);
+		}
+	}
+
+	RB_FOREACH_SAFE(wc, wait_channels, &wait_channels, wc1) {
+		TAILQ_FOREACH_SAFE(wi, &wc->waiters, entry, wi1) {
+			if (cmdq_get_client(wi->item) == c) {
+				cmdq_continue(wi->item);
+				TAILQ_REMOVE(&wc->waiters, wi, entry);
+				free(wi);
+			}
+		}
+		TAILQ_FOREACH_SAFE(wi, &wc->lockers, entry, wi1) {
+			if (cmdq_get_client(wi->item) == c) {
+				cmdq_continue(wi->item);
+				TAILQ_REMOVE(&wc->lockers, wi, entry);
+				free(wi);
+			}
+		}
+		cmd_wait_for_remove_empty(wc);
+	}
+}
+
 void
 cmd_wait_for_flush(void)
 {

configure.ac

@@ -1,6 +1,6 @@
 # configure.ac
 
-AC_INIT([tmux], next-3.8)
+AC_INIT([tmux], 3.8-rc2)
 AC_PREREQ([2.60])
 
 AC_CONFIG_AUX_DIR(etc)

control-notify.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: control-notify.c,v 1.38 2026/08/03 13:38:42 nicm Exp $ */
+/* $OpenBSD: control-notify.c,v 1.39 2026/09/08 10:20:08 nicm Exp $ */
 
 /*
  * Copyright (c) 2012 Nicholas Marriott <nicholas.marriott@gmail.com>
@@ -70,6 +70,7 @@ control_window_layout_changed_cb(__unused const char *name,
 	struct session		*s;
 	struct winlink		*wl;
 	struct window		*w = event_payload_get_window(ep, "window");
+	struct format_tree	*ft;
 	const char		*template;
 	char			*cp;
 
@@ -84,19 +85,25 @@ control_window_layout_changed_cb(__unused const char *name,
 	 * and we don't need to inform the client about the layout change
 	 * because the whole window will go away soon.
 	 */
-	wl = TAILQ_FIRST(&w->winlinks);
-	if (wl == NULL || w->layout_root == NULL)
+	if (TAILQ_FIRST(&w->winlinks) == NULL || w->layout_root == NULL)
 		return;
-	cp = format_single(NULL, template, NULL, NULL, wl, NULL);
 
 	TAILQ_FOREACH(c, &clients, entry) {
 		if (!CONTROL_SHOULD_NOTIFY_CLIENT(c) || c->session == NULL)
 			continue;
 		s = c->session;
-		if (winlink_find_by_window_id(&s->windows, w->id) != NULL)
-			control_notify_write(c, "%s", cp);
+		wl = winlink_find_by_window_id(&s->windows, w->id);
+		if (wl == NULL)
+			continue;
+
+		ft = format_create(c, NULL, FORMAT_NONE, 0);
+		format_defaults(ft, c, s, wl, NULL);
+		cp = format_expand(ft, template);
+		format_free(ft);
+
+		control_notify_write(c, "%s", cp);
+		free(cp);
 	}
-	free(cp);
 }
 
 /* Notify control clients that window pane changed. */
@@ -222,28 +229,6 @@ control_client_session_changed_cb(__unused const char *name,
 	}
 }
 
-/* Notify control clients that a client changed its effective window. */
-static void
-control_client_window_changed_cb(__unused const char *name,
-    struct event_payload *ep, __unused void *sink_data)
-{
-	struct client		*cc = event_payload_get_client(ep, "client");
-	struct session		*s = event_payload_get_session(ep, "session");
-	struct window		*w = event_payload_get_window(ep, "window");
-	struct client		*c;
-
-	if (cc == NULL || s == NULL || w == NULL)
-		return;
-
-	TAILQ_FOREACH(c, &clients, entry) {
-		if (!CONTROL_SHOULD_NOTIFY_CLIENT(c))
-			continue;
-
-		control_write(c, "%%client-window-changed %s $%u @%u",
-		    cc->name, s->id, w->id);
-	}
-}
-
 /* Notify control clients that a client detached. */
 static void
 control_client_detached_cb(__unused const char *name, struct event_payload *ep,
@@ -381,7 +366,6 @@ control_build_events(void)
 		{ "window-linked", control_window_linked_cb },
 		{ "window-renamed", control_window_renamed_cb },
 		{ "client-session-changed", control_client_session_changed_cb },
-		{ "client-window-changed", control_client_window_changed_cb },
 		{ "client-detached", control_client_detached_cb },
 		{ "session-renamed", control_session_renamed_cb },
 		{ "session-created", control_session_created_cb },

control.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: control.c,v 1.66 2026/08/18 07:43:44 nicm Exp $ */
+/* $OpenBSD: control.c,v 1.68 2026/09/09 08:30:05 nicm Exp $ */
 
 /*
  * Copyright (c) 2012 Nicholas Marriott <nicholas.marriott@gmail.com>
@@ -108,6 +108,7 @@ struct control_state {
 	u_int				 pending_count;
 
 	TAILQ_HEAD(, control_block)	 all_blocks;
+	size_t				 queued_reply_bytes;
 
 	struct bufferevent		*read_event;
 	struct bufferevent		*write_event;
@@ -132,6 +133,9 @@ struct control_state {
 /* Maximum age for clients that are not using pause mode. */
 #define CONTROL_MAXIMUM_AGE 300000
 
+/* Maximum buffered command replies for a client that is not reading. */
+#define CONTROL_MAXIMUM_REPLY_BUFFER (64 * 1024 * 1024)
+
 /* Flags to ignore client. */
 #define CONTROL_IGNORE_FLAGS \
 	(CLIENT_CONTROL_NOOUTPUT| \
@@ -165,6 +169,15 @@ RB_GENERATE_STATIC(control_windows, control_window, entry, control_window_cmp);
 static void
 control_free_block(struct control_state *cs, struct control_block *cb)
 {
+	size_t	 size;
+
+	if (cb->size == 0 && cb->line != NULL) {
+		size = strlen(cb->line) + 1;
+		if (cs->queued_reply_bytes > size)
+			cs->queued_reply_bytes -= size;
+		else
+			cs->queued_reply_bytes = 0;
+	}
 	free(cb->line);
 	TAILQ_REMOVE(&cs->all_blocks, cb, all_entry);
 	free(cb);
@@ -407,16 +420,52 @@ control_reset_pane(struct client *c, struct window_pane *wp)
 	memcpy(&cp->queued, &wp->offset, sizeof cp->queued);
 }
 
+/*
+ * Check if the replies buffered for a client, including one about to be
+ * added, have grown too large and kill it if so. Returns 1 if further output
+ * for the client should be dropped.
+ */
+static int
+control_check_reply_buffer(struct client *c, size_t added)
+{
+	struct control_state	*cs = c->control_state;
+	size_t			 size;
+
+	if (c->flags & CLIENT_CONTROL_DISCARD)
+		return (1);
+	size = EVBUFFER_LENGTH(cs->write_event->output);
+	size += cs->queued_reply_bytes;
+	size += added;
+	if (size < CONTROL_MAXIMUM_REPLY_BUFFER)
+		return (0);
+
+	log_debug("%s: %s: %zu bytes of replies buffered", __func__, c->name,
+	    size);
+	if (~c->flags & CLIENT_EXIT) {
+		c->exit_message = xstrdup("too far behind");
+		c->flags |= CLIENT_EXIT;
+		control_discard(c);
+	}
+	c->flags |= CLIENT_CONTROL_DISCARD;
+	return (1);
+}
+
 /* Write an already-formatted line, queueing it behind %output if needed. */
 static void
 control_write_line(struct client *c, char *line)
 {
 	struct control_state	*cs = c->control_state;
 	struct control_block	*cb;
+	size_t			 size = strlen(line) + 1;
+
+	if (control_check_reply_buffer(c, size)) {
+		free(line);
+		return;
+	}
 
 	if (TAILQ_EMPTY(&cs->all_blocks)) {
 		log_debug("%s: %s: writing line: %s", __func__, c->name, line);
-		bufferevent_write(cs->write_event, line, strlen(line));
+		bufferevent_write(cs->write_event, line, size - 1);
 		bufferevent_write(cs->write_event, "\n", 1);
 		bufferevent_enable(cs->write_event, EV_WRITE);
 		free(line);
@@ -426,6 +475,7 @@ control_write_line(struct client *c, char *line)
 	cb = xcalloc(1, sizeof *cb);
 	cb->line = line;
 	TAILQ_INSERT_TAIL(&cs->all_blocks, cb, all_entry);
+	cs->queued_reply_bytes += size;
 	cb->t = get_timer();
 
 	log_debug("%s: %s: storing line: %s", __func__, c->name, cb->line);
@@ -455,8 +505,12 @@ control_flush_deferred(struct client *c)
 void
 control_write(struct client *c, const char *fmt, ...)
 {
-	va_list	 ap;
-	char	*line;
+	struct control_state	*cs = c->control_state;
+	char			*line;
+	va_list			 ap;
+
+	if (cs == NULL)
+		return;
 
 	va_start(ap, fmt);
 	xvasprintf(&line, fmt, ap);
@@ -479,6 +533,9 @@ control_write_guard(struct client *c, const char *guard, long t, u_int number,
 	struct control_state	*cs = c->control_state;
 	char			*line;
 
+	if (cs == NULL)
+		return;
+
 	if (strcmp(guard, "begin") == 0)
 		cs->guard_depth++;
 
@@ -503,6 +560,9 @@ control_notify_write(struct client *c, const char *fmt, ...)
 	va_list			 ap;
 	char			*line;
 
+	if (cs == NULL)
+		return;
+
 	va_start(ap, fmt);
 	xvasprintf(&line, fmt, ap);
 	va_end(ap);
@@ -997,6 +1057,7 @@ control_discard_all(struct client *c)
 	control_discard(c);
 	TAILQ_FOREACH_SAFE(cb, &cs->all_blocks, all_entry, cb1)
 		control_free_block(cs, cb);
+	cs->queued_reply_bytes = 0;
 	bufferevent_disable(cs->write_event, EV_WRITE);
 }
 

format.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: format.c,v 1.415 2026/08/31 19:34:09 nicm Exp $ */
+/* $OpenBSD: format.c,v 1.418 2026/09/20 08:19:31 nicm Exp $ */
 
 /*
  * Copyright (c) 2011 Nicholas Marriott <nicholas.marriott@gmail.com>
@@ -806,7 +806,7 @@ format_cb_window_active_clients(struct format_tree *ft)
 		if (client_session == NULL)
 			continue;
 
-		if (w == active_get_effective_window(loop, client_session))
+		if (w == client_session->curw->window)
 			n++;
 	}
 
@@ -838,7 +838,7 @@ format_cb_window_active_clients_list(struct format_tree *ft)
 		if (client_session == NULL)
 			continue;
 
-		if (w == active_get_effective_window(loop, client_session)) {
+		if (w == client_session->curw->window) {
 			if (EVBUFFER_LENGTH(buffer) > 0)
 				evbuffer_add(buffer, ",", 1);
 			evbuffer_add_printf(buffer, "%s", loop->name);
@@ -855,26 +855,42 @@ format_cb_window_active_clients_list(struct format_tree *ft)
 static void *
 format_cb_window_layout(struct format_tree *ft)
 {
-	struct window	*w = ft->w;
+	struct client		*c = ft->client;
+	struct window		*w = ft->w;
+	struct layout_cell	*lcroot;
+	int			 flags = 0;
 
 	if (w == NULL)
 		return (NULL);
 
 	if (w->saved_layout_root != NULL)
-		return (layout_dump(w, w->saved_layout_root));
-	return (layout_dump(w, w->layout_root));
+		lcroot = w->saved_layout_root;
+	else
+		lcroot = w->layout_root;
+
+	if (c != NULL &&
+	    (c->flags & CLIENT_CONTROL) &&
+	    (~c->flags & CLIENT_CONTROL_NEWLAYOUTS))
+		flags |= LAYOUT_CUSTOM_OLD_FORMAT;
+	return (layout_dump(w, lcroot, flags));
 }
 
 /* Callback for window_visible_layout. */
 static void *
 format_cb_window_visible_layout(struct format_tree *ft)
 {
+	struct client	*c = ft->client;
 	struct window	*w = ft->w;
+	int		 flags = 0;
 
 	if (w == NULL)
 		return (NULL);
 
-	return (layout_dump(w, w->layout_root));
+	if (c != NULL &&
+	    (c->flags & CLIENT_CONTROL) &&
+	    (~c->flags & CLIENT_CONTROL_NEWLAYOUTS))
+		flags |= LAYOUT_CUSTOM_OLD_FORMAT;
+	return (layout_dump(w, w->layout_root, flags));
 }
 
 /* Callback for pane_start_command. */
@@ -2860,10 +2876,10 @@ format_cb_session_activity_flag(struct format_tree *ft)
 
 	if (ft->s != NULL) {
 		RB_FOREACH(wl, winlinks, &ft->s->windows) {
-			if (ft->wl->flags & WINLINK_ACTIVITY)
+			if (wl->flags & WINLINK_ACTIVITY)
 				return (xstrdup("1"));
-			return (xstrdup("0"));
 		}
+		return (xstrdup("0"));
 	}
 	return (NULL);
 }
@@ -2878,8 +2894,8 @@ format_cb_session_bell_flag(struct format_tree *ft)
 		RB_FOREACH(wl, winlinks, &ft->s->windows) {
 			if (wl->flags & WINLINK_BELL)
 				return (xstrdup("1"));
-			return (xstrdup("0"));
 		}
+		return (xstrdup("0"));
 	}
 	return (NULL);
 }
@@ -2892,10 +2908,10 @@ format_cb_session_silence_flag(struct format_tree *ft)
 
 	if (ft->s != NULL) {
 		RB_FOREACH(wl, winlinks, &ft->s->windows) {
-			if (ft->wl->flags & WINLINK_SILENCE)
+			if (wl->flags & WINLINK_SILENCE)
 				return (xstrdup("1"));
-			return (xstrdup("0"));
 		}
+		return (xstrdup("0"));
 	}
 	return (NULL);
 }
@@ -3066,48 +3082,11 @@ format_cb_sixel_support(__unused struct format_tree *ft)
 static void *
 format_cb_active_window_index(struct format_tree *ft)
 {
-	struct winlink	*wl;
-
-	if (ft->s != NULL) {
-		wl = active_get_effective_winlink(ft->c, ft->s);
-		if (wl != NULL)
-			return (format_printf("%u", wl->idx));
-	}
+	if (ft->s != NULL)
+		return (format_printf("%u", ft->s->curw->idx));
 	return (NULL);
 }
 
-/* Callback for active_window_id. */
-static void *
-format_cb_active_window_id(struct format_tree *ft)
-{
-	struct winlink	*wl;
-
-	if (ft->s != NULL) {
-		wl = active_get_effective_winlink(ft->c, ft->s);
-		if (wl != NULL)
-			return (format_printf("@%u", wl->window->id));
-	}
-	return (NULL);
-}
-
-/* Callback for local_active_window. */
-static void *
-format_cb_local_active_window(struct format_tree *ft)
-{
-	if (ft->c != NULL && ft->s != NULL)
-		return (format_printf("%d", active_is_local_window(ft->c, ft->s)));
-	return (xstrdup("0"));
-}
-
-/* Callback for active_window_mode. */
-static void *
-format_cb_active_window_mode(struct format_tree *ft)
-{
-	if (ft->c != NULL && ft->s != NULL && active_is_local_window(ft->c, ft->s))
-		return (xstrdup("local"));
-	return (xstrdup("shared"));
-}
-
 /* Callback for last_window_index. */
 static void *
 format_cb_last_window_index(struct format_tree *ft)
@@ -3125,11 +3104,8 @@ format_cb_last_window_index(struct format_tree *ft)
 static void *
 format_cb_window_active(struct format_tree *ft)
 {
-	struct winlink	*wl;
-
 	if (ft->wl != NULL) {
-		wl = active_get_effective_winlink(ft->c, ft->wl->session);
-		if (ft->wl == wl)
+		if (ft->wl == ft->wl->session->curw)
 			return (xstrdup("1"));
 		return (xstrdup("0"));
 	}
@@ -3209,7 +3185,7 @@ static void *
 format_cb_window_flags(struct format_tree *ft)
 {
 	if (ft->wl != NULL)
-		return (xstrdup(window_printable_flags(ft->c, ft->wl, 1)));
+		return (xstrdup(window_printable_flags(ft->wl, 1)));
 	return (NULL);
 }
 
@@ -3396,7 +3372,7 @@ static void *
 format_cb_window_raw_flags(struct format_tree *ft)
 {
 	if (ft->wl != NULL)
-		return (xstrdup(window_printable_flags(ft->c, ft->wl, 0)));
+		return (xstrdup(window_printable_flags(ft->wl, 0)));
 	return (NULL);
 }
 
@@ -3606,15 +3582,9 @@ struct format_table_entry {
  * Only variables which are added by the caller go into the tree.
  */
 static const struct format_table_entry format_table[] = {
-	{ "active_window_id", FORMAT_TABLE_STRING,
-	  format_cb_active_window_id
-	},
 	{ "active_window_index", FORMAT_TABLE_STRING,
 	  format_cb_active_window_index
 	},
-	{ "active_window_mode", FORMAT_TABLE_STRING,
-	  format_cb_active_window_mode
-	},
 	{ "alternate_on", FORMAT_TABLE_STRING,
 	  format_cb_alternate_on
 	},
@@ -3792,9 +3762,6 @@ static const struct format_table_entry format_table[] = {
 	{ "last_window_index", FORMAT_TABLE_STRING,
 	  format_cb_last_window_index
 	},
-	{ "local_active_window", FORMAT_TABLE_STRING,
-	  format_cb_local_active_window
-	},
 	{ "mouse_all_flag", FORMAT_TABLE_STRING,
 	  format_cb_mouse_all_flag
 	},
@@ -5283,6 +5250,7 @@ format_loop_sessions(struct format_expand_state *es, const char *fmt)
 		format_log(es, "session loop: $%u", s->id);
 		if (active != NULL &&
 		    ft->c != NULL &&
+		    ft->c->session != NULL &&
 		    s->id == ft->c->session->id)
 			use = active;
 		else
@@ -5344,18 +5312,15 @@ format_add_window_neighbour(struct format_tree *nft, struct winlink *wl,
     struct session *s, const char *prefix)
 {
 	struct options_entry	*o;
-	struct winlink		*current;
 	const char		*oname;
 	char			*key, *prefixed, *oval;
 
-	current = active_get_effective_winlink(nft->c, s);
-
 	xasprintf(&key, "%s_window_index", prefix);
 	format_add(nft, key, "%u", wl->idx);
 	free(key);
 
 	xasprintf(&key, "%s_window_active", prefix);
-	format_add(nft, key, "%d", wl == current);
+	format_add(nft, key, "%d", wl == s->curw);
 	free(key);
 
 	o = options_first(wl->window->options);
@@ -5383,10 +5348,10 @@ format_loop_windows(struct format_expand_state *es, const char *fmt)
 	struct cmdq_item		*item = ft->item;
 	struct format_tree		*nft;
 	struct format_expand_state	 next;
-	char				*all, *active_fmt, *use, *expanded, *value;
+	char				*all, *active, *use, *expanded, *value;
 	struct evbuffer			*buffer;
 	size_t				 size;
-	struct winlink			*wl, **l, *active_wl;
+	struct winlink			*wl, **l;
 	struct window			*w;
 	int				 i, n;
 
@@ -5395,9 +5360,9 @@ format_loop_windows(struct format_expand_state *es, const char *fmt)
 		return (NULL);
 	}
 
-	if (format_choose(es, fmt, &all, &active_fmt, 0) != 0) {
+	if (format_choose(es, fmt, &all, &active, 0) != 0) {
 		all = xstrdup(fmt);
-		active_fmt = NULL;
+		active = NULL;
 	}
 
 	buffer = evbuffer_new();
@@ -5405,13 +5370,12 @@ format_loop_windows(struct format_expand_state *es, const char *fmt)
 		fatalx("out of memory");
 
 	l = sort_get_winlinks_session(s, &n, sc);
-	active_wl = active_get_effective_winlink(ft->c, s);
 	for (i = 0; i < n; i++) {
 		wl = l[i];
 		w = wl->window;
 		format_log(es, "window loop: %u @%u", wl->idx, w->id);
-		if (active_fmt != NULL && wl == active_wl)
-			use = active_fmt;
+		if (active != NULL && wl == s->curw)
+			use = active;
 		else
 			use = all;
 		nft = format_create(c, item, FORMAT_WINDOW|w->id, ft->flags);
@@ -5420,11 +5384,11 @@ format_loop_windows(struct format_expand_state *es, const char *fmt)
 		format_add(nft, "loop_last_flag", "%d", i == n - 1);
 
 		/* Add neighbour window data to the format tree. */
-		if (i > 0 && l[i - 1] == active_wl)
+		if (i > 0 && l[i - 1] == s->curw)
 			format_add(nft, "window_after_active", "1");
 		else
 			format_add(nft, "window_after_active", "0");
-		if (i + 1 < n && l[i + 1] == active_wl)
+		if (i + 1 < n && l[i + 1] == s->curw)
 			format_add(nft, "window_before_active", "1");
 		else
 			format_add(nft, "window_before_active", "0");
@@ -5444,7 +5408,7 @@ format_loop_windows(struct format_expand_state *es, const char *fmt)
 		free(expanded);
 	}
 
-	free(active_fmt);
+	free(active);
 	free(all);
 
 	if ((size = EVBUFFER_LENGTH(buffer)) != 0)
@@ -7032,7 +6996,7 @@ format_defaults(struct format_tree *ft, struct client *c, struct session *s,
 	if (s == NULL && c != NULL)
 		s = c->session;
 	if (wl == NULL && s != NULL)
-		wl = active_get_effective_winlink(c, s);
+		wl = s->curw;
 	if (wp == NULL && wl != NULL)
 		wp = wl->window->active;
 

key-bindings.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: key-bindings.c,v 1.192 2026/08/06 09:05:04 nicm Exp $ */
+/* $OpenBSD: key-bindings.c,v 1.193 2026/09/21 20:45:48 nicm Exp $ */
 
 /*
  * Copyright (c) 2007 Nicholas Marriott <nicholas.marriott@gmail.com>
@@ -31,8 +31,6 @@
 	" 'Rename' 'r' {command-prompt -I '#S' {rename-session -- '%%'}}" \
 	" 'Detach' 'd' {detach-client}" \
 	" ''" \
-	" '#{?local_active_window,Shared Window,Local Window}' 'L' {select-window #{?local_active_window,-S,-L}}" \
-	" ''" \
 	" 'New Session' 's' {new-session}" \
 	" 'New Window' 'w' {new-window}"
 #define DEFAULT_WINDOW_MENU \
@@ -525,7 +523,7 @@ key_bindings_init(void)
 		"bind -n TripleClick1Pane { select-pane -t=; if -F '#{||:#{pane_in_mode},#{mouse_any_flag}}' { send -M } { copy-mode -H; send -X select-line; run -d0.3; send -X copy-pipe-and-cancel } }",
 
 		/* Mouse button 1 on border. */
-		"bind -n MouseDown1Border { select-pane -M }",
+		"bind -n MouseDown1Border { select-pane -t= }",
 
 		/* Mouse button 1 drag on border. */
 		"bind -n MouseDrag1Border { resize-pane -M }",

layout.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: layout.c,v 1.98 2026/08/25 18:38:05 nicm Exp $ */
+/* $OpenBSD: layout.c,v 1.101 2026/09/20 08:42:46 nicm Exp $ */
 
 /*
  * Copyright (c) 2009 Nicholas Marriott <nicholas.marriott@gmail.com>
@@ -106,7 +106,7 @@ layout_free_cell(struct layout_cell *lc, int only_nodes)
 		}
 		break;
 	case LAYOUT_WINDOWPANE:
-		if (lc->wp != NULL) {
+		if (lc->wp != NULL && lc->wp->layout_cell != NULL) {
 			lc->wp->layout_cell->parent = NULL;
 			lc->wp->layout_cell = NULL;
 		}
@@ -233,29 +233,6 @@ layout_make_node(struct layout_cell *lc, enum layout_type type)
 	lc->wp = NULL;
 }
 
-/* Fix z-indexes. */
-void
-layout_fix_zindexes(struct window *w, struct layout_cell *lc)
-{
-	struct layout_cell	*lcchild;
-
-	if (lc == NULL)
-		return;
-
-	switch (lc->type) {
-	case LAYOUT_WINDOWPANE:
-		TAILQ_INSERT_TAIL(&w->z_index, lc->wp, zentry);
-		break;
-	case LAYOUT_LEFTRIGHT:
-	case LAYOUT_TOPBOTTOM:
-		TAILQ_FOREACH(lcchild, &lc->cells, entry)
-			layout_fix_zindexes(w, lcchild);
-		return;
-	default:
-		fatalx("bad layout type");
-	}
-}
-
 int
 layout_cell_is_tiled(struct layout_cell *lc)
 {
@@ -265,7 +242,7 @@ layout_cell_is_tiled(struct layout_cell *lc)
 	return is_leaf && !is_floating;
 }
 
-static int
+int
 layout_cell_has_tiled_child(struct layout_cell *lc)
 {
 	struct layout_cell      *lcchild;
@@ -509,18 +486,20 @@ layout_fix_panes(struct window *w, struct window_pane *skip)
 
 /* Count the number of available cells in a layout. */
 u_int
-layout_count_cells(struct layout_cell *lc)
+layout_count_cells(struct layout_cell *lc, int with_floating)
 {
 	struct layout_cell	*lcchild;
 	u_int			 count = 0;
 
 	switch (lc->type) {
 	case LAYOUT_WINDOWPANE:
+		if (lc->flags & LAYOUT_CELL_FLOATING && !with_floating)
+			return 0;
 		return (1);
 	case LAYOUT_LEFTRIGHT:
 	case LAYOUT_TOPBOTTOM:
 		TAILQ_FOREACH(lcchild, &lc->cells, entry)
-			count += layout_count_cells(lcchild);
+			count += layout_count_cells(lcchild, with_floating);
 		return (count);
 	default:
 		fatalx("bad layout type");
@@ -721,7 +700,7 @@ layout_destroy_cell(struct window *w, struct layout_cell *lc,
 	/* If no parent, this is the last pane in a window. */
 	lcparent = lc->parent;
 	if (lcparent == NULL) {
-		if (lc->wp != NULL)
+		if (*lcroot == lc)
 			*lcroot = NULL;
 		layout_free_cell(lc, 0);
 		return;
@@ -789,6 +768,49 @@ layout_free(struct window *w, int only_nodes)
 	layout_free_cell(w->layout_root, only_nodes);
 }
 
+/* Move and resize floating panes so they stay inside the window. */
+static void
+layout_clamp_floating_panes(struct window *w, u_int sx, u_int sy)
+{
+	struct window_pane	*wp;
+	struct layout_cell	*lc;
+	u_int			 pad, avail, csx, csy;
+
+	TAILQ_FOREACH(wp, &w->z_index, zentry) {
+		lc = wp->layout_cell;
+		if (lc == NULL || (~lc->flags & LAYOUT_CELL_FLOATING))
+			continue;
+		if (window_pane_get_pane_lines(wp) == PANE_LINES_NONE)
+			pad = 0;
+		else
+			pad = 1;
+
+		csx = lc->g.sx;
+		avail = (sx > 2 * pad) ? sx - 2 * pad : 0;
+		if (csx > avail)
+			csx = (avail > PANE_MINIMUM) ? avail : PANE_MINIMUM;
+		csy = lc->g.sy;
+		avail = (sy > 2 * pad) ? sy - 2 * pad : 0;
+		if (csy > avail)
+			csy = (avail > PANE_MINIMUM) ? avail : PANE_MINIMUM;
+		if (csx != lc->g.sx || csy != lc->g.sy)
+			layout_set_size(lc, csx, csy, lc->g.xoff, lc->g.yoff);
+
+		if (lc->g.xoff + lc->g.sx + pad > sx) {
+			if (lc->g.sx + 2 * pad >= sx)
+				lc->g.xoff = pad;
+			else
+				lc->g.xoff = sx - lc->g.sx - pad;
+		}
+		if (lc->g.yoff + lc->g.sy + pad > sy) {
+			if (lc->g.sy + 2 * pad >= sy)
+				lc->g.yoff = pad;
+			else
+				lc->g.yoff = sy - lc->g.sy - pad;
+		}
+	}
+}
+
 /* Resize the entire layout after window resize. */
 void
 layout_resize(struct window *w, u_int sx, u_int sy)
@@ -809,8 +831,11 @@ layout_resize(struct window *w, u_int sx, u_int sy)
 	 * out proportionately - this should leave the layout fitting the new
 	 * window size.
 	 */
-	if (lc->type == LAYOUT_WINDOWPANE && (lc->flags & LAYOUT_CELL_FLOATING))
+	if (lc->type == LAYOUT_WINDOWPANE && (lc->flags & LAYOUT_CELL_FLOATING)) {
+		layout_clamp_floating_panes(w, sx, sy);
+		layout_fix_panes(w, NULL);
 		return;
+	}
 	xchange = sx - lc->g.sx;
 	xlimit = layout_resize_check(w, lc, LAYOUT_LEFTRIGHT);
 	if (xchange < 0 && xchange < -xlimit)
@@ -840,6 +865,7 @@ layout_resize(struct window *w, u_int sx, u_int sy)
 
 	/* Fix cell offsets. */
 	layout_fix_offsets(w);
+	layout_clamp_floating_panes(w, sx, sy);
 	layout_fix_panes(w, NULL);
 }
 
@@ -1702,7 +1728,7 @@ layout_floating_args_parse(struct cmdq_item *item, struct args *args,
     enum pane_lines lines, struct window *w, struct layout_geometry *lg,
     char **cause)
 {
-	int	 sx, sy, ox, oy;
+	int	 sx, sy, ox, oy, pad;
 	char	*error = NULL;
 
 	sx = lg->sx == UINT_MAX ? w->sx / 2 : lg->sx;
@@ -1751,12 +1777,20 @@ layout_floating_args_parse(struct cmdq_item *item, struct args *args,
 		}
 	}
 
+	if (!window_has_floating_panes(w)) {
+		w->last_new_pane_x = 0;
+		w->last_new_pane_y = 0;
+	}
 	if (ox == INT_MAX) {
 		if (w->last_new_pane_x == 0)
 			ox = 4;
 		else {
+			if (lines != PANE_LINES_NONE)
+				pad = 1;
+			else
+				pad = 0;
 			ox = w->last_new_pane_x + 4;
-			if (w->last_new_pane_x > w->sx)
+			if (ox + sx + pad > (int)w->sx)
 				ox = 4;
 		}
 		w->last_new_pane_x = ox;
@@ -1767,8 +1801,12 @@ layout_floating_args_parse(struct cmdq_item *item, struct args *args,
 		if (w->last_new_pane_y == 0)
 			oy = 2;
 		else {
+			if (lines != PANE_LINES_NONE)
+				pad = 1;
+			else
+				pad = 0;
 			oy = w->last_new_pane_y + 2;
-			if (w->last_new_pane_y > w->sy)
+			if (oy + sy + pad > (int)w->sy)
 				oy = 2;
 		}
 		w->last_new_pane_y = oy;

menu.c

@@ -586,7 +586,7 @@ menu_display(struct menu *menu, int flags, int starting_choice,
 	struct options		*o;
 
 	if (fs == NULL)
-		w = active_get_effective_window(c, c->session);
+		w = c->session->curw->window;
 	else
 		w = fs->w;
 	o = w->options;

monitor.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: monitor.c,v 1.7 2026/07/27 19:15:58 nicm Exp $ */
+/* $OpenBSD: monitor.c,v 1.8 2026/09/07 10:15:25 nicm Exp $ */
 
 /*
  * Copyright (c) 2026 Nicholas Marriott <nicholas.marriott@gmail.com>
@@ -614,8 +614,10 @@ monitor_parse(const char *value, char **name, enum monitor_type *type, int *id,
 		*type = MONITOR_ALL_WINDOWS;
 	else if (sscanf(what, "@%d", id) == 1 && *id >= 0)
 		*type = MONITOR_WINDOW;
-	else
+	else if (*what == '\0')
 		*type = MONITOR_SESSION;
+	else
+		goto fail;
 	*name = xstrdup(copy);
 	*format = xstrdup(split);
 

options-table.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: options-table.c,v 1.244 2026/09/01 12:49:49 nicm Exp $ */
+/* $OpenBSD: options-table.c,v 1.245 2026/09/10 11:02:18 nicm Exp $ */
 
 /*
  * Copyright (c) 2011 Nicholas Marriott <nicholas.marriott@gmail.com>
@@ -91,7 +91,7 @@ static const char *options_table_window_size_list[] = {
 	"largest", "smallest", "manual", "latest", NULL
 };
 static const char *options_table_remain_on_exit_list[] = {
-	"off", "on", "failed", "key", NULL
+	"off", "on", "failed", "key", "failed-key", NULL
 };
 static const char *options_table_destroy_unattached_list[] = {
 	"off", "on", "keep-last", "keep-group", NULL
@@ -1125,8 +1125,7 @@ const struct options_table_entry options_table[] = {
 	{ .name = "status-style",
 	  .type = OPTIONS_TABLE_STRING,
 	  .scope = OPTIONS_TABLE_SESSION,
-	  .default_str = "bg=#{?local_active_window,themeblue,themegreen},"
-			 "fg=themeblack",
+	  .default_str = "bg=themegreen,fg=themeblack",
 	  .flags = OPTIONS_TABLE_IS_STYLE,
 	  .separator = ",",
 	  .text = "Style of the status line."
@@ -1699,7 +1698,8 @@ const struct options_table_entry options_table[] = {
 	  .choices = options_table_remain_on_exit_list,
 	  .default_num = 0,
 	  .text = "Whether panes should remain ('on'), remain until a key is "
-		  "pressed ('key') or be automatically killed ('off' or "
+		  "pressed after any exit ('key') or after a failure "
+		  "('failed-key'), or be automatically killed ('off' or "
 		  "'failed') when the program inside exits."
 	},
 
@@ -1983,8 +1983,6 @@ const struct options_table_entry options_table[] = {
 	    "Run when a client is resized."),
 	OPTIONS_TABLE_HOOK("client-session-changed", "",
 	    "Run when a client's attached session is changed."),
-	OPTIONS_TABLE_HOOK("client-window-changed", "",
-	    "Run when a client's effective window is changed."),
 	OPTIONS_TABLE_HOOK("client-light-theme", "",
 	    "Run when a client switches to a light theme."),
 	OPTIONS_TABLE_HOOK("client-dark-theme", "",

popup.c

@@ -103,9 +103,9 @@ popup_reapply_styles(struct popup_data *pd)
 
 	if (s == NULL)
 		return;
-	o = active_get_effective_window(c, s)->options;
+	o = s->curw->window->options;
 
-	ft = format_create_defaults(NULL, c, s, NULL, NULL);
+	ft = format_create_defaults(NULL, c, s, s->curw, NULL);
 
 	/* Reapply popup style from options. */
 	memcpy(&pd->defaults, &grid_default_cell, sizeof pd->defaults);
@@ -570,9 +570,9 @@ popup_display(int flags, enum box_lines lines, struct cmdq_item *item, u_int px,
 	struct style		 sytmp;
 
 	if (s != NULL)
-		o = active_get_effective_window(c, s)->options;
+		o = s->curw->window->options;
 	else
-		o = active_get_effective_window(c, c->session)->options;
+		o = c->session->curw->window->options;
 
 	if (lines == BOX_LINES_DEFAULT)
 		lines = options_get_number(o, "popup-border-lines");

prompt.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: prompt.c,v 1.6 2026/08/17 06:45:16 nicm Exp $ */
+/* $OpenBSD: prompt.c,v 1.7 2026/09/09 07:53:03 nicm Exp $ */
 
 /*
  * Copyright (c) 2026 Nicholas Marriott <nicholas.marriott@gmail.com>
@@ -1493,9 +1493,11 @@ append_key:
 		utf8_set(&tmp, key);
 		if (key <= 0x1f || key == 0x7f)
 			tmp.width = 2;
-	} else if (KEYC_IS_UNICODE(key))
+	} else if (KEYC_IS_UNICODE(key)) {
 		utf8_to_data(key, &tmp);
-	else
+		if (tmp.size == 0)
+			return (PROMPT_KEY_HANDLED);
+	} else
 		return (PROMPT_KEY_HANDLED);
 
 	pr->buffer = xreallocarray(pr->buffer, size + 2,

regress/Makefile

@@ -1,33 +1,17 @@
 TESTS!= echo *.sh
 LOGDIR=logs
 
-.PHONY: all
-.NOTPARALLEL: all
+.PHONY: all prepare $(TESTS)
 
-all:
-	@mkdir -p "$(LOGDIR)"; \
-	rm -f "$(LOGDIR)"/*.log; \
-	failed=0; failures=; \
+all: prepare $(TESTS)
+	@failed=0; failures=; \
 	for test in $(TESTS); do \
 		base=$${test##*/}; \
 		log="$(LOGDIR)/$${base%.sh}.log"; \
-		rm -f "$$log"; \
-		printf '%-40s ' "$$test"; \
-		start=$$(date +%s); \
-		env -i LC_CTYPE=C.UTF-8 MallocNanoZone=0 \
-		    sh -x "$$test" >"$$log" 2>&1; \
-		if [ $$? -eq 0 ]; then \
-			end=$$(date +%s); \
-			rm -f "$$log"; \
-			echo "PASS ($$((end - start))s)"; \
-		else \
-			end=$$(date +%s); \
-			echo "FAIL ($$((end - start))s)"; \
-			echo " log: $$log"; \
+		if [ -f "$$log" ]; then \
 			failed=1; \
 			failures="$$failures $$test"; \
 		fi; \
-		sleep 1; \
 	done; \
 	if [ "$$failed" -ne 0 ]; then \
 		echo; \
@@ -39,3 +23,22 @@ all:
 		rmdir "$(LOGDIR)" 2>/dev/null || true; \
 	fi; \
 	exit $$failed
+
+prepare:
+	@mkdir -p "$(LOGDIR)"
+	@rm -f "$(LOGDIR)"/*.log
+
+$(TESTS): prepare
+	@base="$@"; base=$${base##*/}; \
+	log="$(LOGDIR)/$${base%.sh}.log"; \
+	start=$$(date +%s); \
+	if env -i LC_CTYPE=C.UTF-8 MallocNanoZone=0 \
+	    sh -x "$@" >"$$log" 2>&1; then \
+		end=$$(date +%s); \
+		rm -f "$$log"; \
+		printf '%-40s PASS (%ss)\n' "$@" "$$((end - start))"; \
+	else \
+		end=$$(date +%s); \
+		printf '%-40s FAIL (%ss)\n log: %s\n' \
+		    "$@" "$$((end - start))" "$$log"; \
+	fi

regress/active-window.sh

@@ -1,151 +0,0 @@
-#!/bin/sh
-
-PATH=/bin:/usr/bin
-TERM=screen
-LC_ALL=C.UTF-8
-LANG=C.UTF-8
-export TERM LC_ALL LANG
-
-[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
-TMUX="$TEST_TMUX -LtestA$$ -f/dev/null"
-
-TMPDIR=$(mktemp -d)
-IN1="$TMPDIR/in1"
-IN2="$TMPDIR/in2"
-OUT1="$TMPDIR/out1"
-OUT2="$TMPDIR/out2"
-PID1=
-PID2=
-
-cleanup()
-{
-	[ -n "$PID1" ] && kill "$PID1" 2>/dev/null
-	[ -n "$PID2" ] && kill "$PID2" 2>/dev/null
-	$TMUX kill-server 2>/dev/null
-	rm -rf "$TMPDIR"
-}
-trap cleanup EXIT
-
-fail()
-{
-	echo "$1"
-	echo "client1:"
-	cat "$OUT1" 2>/dev/null
-	echo "client2:"
-	cat "$OUT2" 2>/dev/null
-	exit 1
-}
-
-wait_for()
-{
-	file=$1
-	pattern=$2
-	i=0
-
-	while [ "$i" -lt 60 ]; do
-		if grep -F -- "$pattern" "$file" >/dev/null 2>&1; then
-			return 0
-		fi
-		sleep 0.1
-		i=$((i + 1))
-	done
-	fail "missing '$pattern' in $file"
-}
-
-send1()
-{
-	printf '%s\n' "$*" >&3
-}
-
-send2()
-{
-	printf '%s\n' "$*" >&4
-}
-
-check_server()
-{
-	out=$($TMUX display-message -p -t "$1" "$2")
-	[ "$out" = "$3" ] || fail "expected '$3' for $1 $2, got '$out'"
-}
-
-$TMUX kill-server 2>/dev/null
-$TMUX new-session -d -s aw -x 80 -y 24 -n w0 || exit 1
-$TMUX new-window -d -t aw: -n w1 || exit 1
-$TMUX new-window -d -t aw: -n w2 || exit 1
-$TMUX new-session -d -s aw2 -x 80 -y 24 -n x0 || exit 1
-$TMUX new-window -d -t aw2: -n x1 || exit 1
-
-mkfifo "$IN1" "$IN2" || exit 1
-: >"$OUT1"
-: >"$OUT2"
-$TMUX -C attach-session -t aw <"$IN1" >"$OUT1" 2>&1 &
-PID1=$!
-$TMUX -C attach-session -t aw <"$IN2" >"$OUT2" 2>&1 &
-PID2=$!
-exec 3>"$IN1"
-exec 4>"$IN2"
-
-send1 'display-message -p C1READY'
-send2 'display-message -p C2READY'
-wait_for "$OUT1" C1READY
-wait_for "$OUT2" C2READY
-
-# Default shared selection: client 1 changes session current, client 2 follows.
-send1 'display-message -p "C1A #{active_window_index} #{local_active_window} #{window_index}"'
-wait_for "$OUT1" 'C1A 0 0 0'
-send1 'select-window -t :1'
-wait_for "$OUT2" '%session-window-changed $0 @1'
-send2 'display-message -p "C2A #{active_window_index} #{local_active_window} #{window_index}"'
-wait_for "$OUT2" 'C2A 1 0 1'
-check_server 'aw:' '#{window_index}' '1'
-
-# Local selection changes only client 1 and becomes the default command target.
-send1 'select-window -L'
-send1 'select-window -t :2'
-send1 'display-message -p "C1B #{active_window_index} #{local_active_window} #{window_index}"'
-wait_for "$OUT1" 'C1B 2 1 2'
-send2 'display-message -p "C2B #{active_window_index} #{local_active_window} #{window_index}"'
-wait_for "$OUT2" 'C2B 1 0 1'
-check_server 'aw:' '#{window_index}' '1'
-
-# Local last-window history is independent of the session shared stack.
-send1 'last-window'
-send1 'display-message -p "C1C #{active_window_index} #{window_index}"'
-wait_for "$OUT1" 'C1C 1 1'
-send1 'next-window'
-send1 'display-message -p "C1D #{active_window_index} #{window_index}"'
-wait_for "$OUT1" 'C1D 2 2'
-check_server 'aw:' '#{window_index}' '1'
-
-# Session switches preserve per-session local selections.
-send1 'switch-client -t aw2'
-send1 'select-window -L'
-send1 'select-window -t :1'
-send1 'display-message -p "C1E #{session_name} #{active_window_index} #{local_active_window}"'
-wait_for "$OUT1" 'C1E aw2 1 1'
-send1 'switch-client -t aw'
-send1 'display-message -p "C1F #{session_name} #{active_window_index} #{local_active_window}"'
-wait_for "$OUT1" 'C1F aw 2 1'
-
-# Returning to shared mode immediately follows the session current window.
-send1 'select-window -S'
-send1 'display-message -p "C1G #{active_window_index} #{local_active_window} #{window_index}"'
-wait_for "$OUT1" 'C1G 1 0 1'
-
-# Invalid local windows recover to a valid session window without changing curw.
-send1 'select-window -L'
-send1 'select-window -t :2'
-$TMUX kill-window -t aw:2 || fail 'kill-window failed'
-send1 'display-message -p "C1H #{active_window_index} #{local_active_window} #{window_index}"'
-wait_for "$OUT1" 'C1H 1 1 1'
-check_server 'aw:' '#{window_index}' '1'
-
-# Creating a window without -d in local mode selects it locally only.
-send1 'new-window -n w3'
-send1 'display-message -p "C1I #{local_active_window} #{window_name}"'
-wait_for "$OUT1" 'C1I 1 w3'
-send2 'display-message -p "C2C #{local_active_window} #{window_name}"'
-wait_for "$OUT2" 'C2C 0 w1'
-check_server 'aw:' '#{window_name}' 'w1'
-
-exit 0

regress/alerts.sh

@@ -2,8 +2,9 @@
 
 # monitor-activity, monitor-bell and monitor-silence: both the
 # alert-activity, alert-bell and alert-silence hooks and the winlink alert
-# flags (window_activity_flag, window_bell_flag, window_silence_flag and
-# the #, !, ~ characters in window_flags). The sessions are detached so
+# flags (window_activity_flag, window_bell_flag, window_silence_flag,
+# their session equivalents and the #, !, ~ characters in window_flags).
+# The sessions are detached so
 # alert flags are set even on the current window; the *-action options
 # still decide whether the hooks fire. Panes run cat: activity is
 # generated by the tty echo of send-keys and a bell by sending a BEL and
@@ -111,6 +112,24 @@ flags_have()
 	esac
 }
 
+assert_session_flag()
+{
+	flag="#{session_${1}_flag}"
+	expected=$2
+
+	# Only mon exists here. Check both window contexts and list-sessions.
+	for target in mon:w0 "mon:$3"; do
+		value=$($TMUX display -pt "$target" "$flag") ||
+			fail "display $flag failed"
+		[ "$value" = "$expected" ] ||
+			fail "expected $flag for $target to be '$expected' but got '$value'"
+	done
+	value=$($TMUX list-sessions -F "$flag") ||
+		fail "list-sessions $flag failed"
+	[ "$value" = "$expected" ] ||
+		fail "expected list-sessions $flag to be '$expected' but got '$value'"
+}
+
 flags_lack()
 {
 	target=$1
@@ -150,10 +169,12 @@ $TMUX set-hook -g alert-silence \
 # alert-bell and sets the bell flag, shown as ! in window_flags.
 $TMUX neww -d -t mon: -n bellw cat || fail "new-window bellw failed"
 assert_fmt_unchanged mon:bellw '#{window_bell_flag}' 0
+assert_session_flag bell 0 bellw
 flags_lack mon:bellw '!'
 bell mon:bellw
 wait_for @log '|alert-bell:mon:bellw'
 wait_for_fmt mon:bellw '#{window_bell_flag}' 1
+assert_session_flag bell 1 bellw
 flags_have mon:bellw '!'
 
 # Bells are not deduplicated: a second bell fires the hook again even
@@ -164,6 +185,7 @@ wait_for @log '|alert-bell:mon:bellw|alert-bell:mon:bellw'
 # Selecting the window clears the alert flags.
 $TMUX selectw -t mon:bellw || fail "select-window bellw failed"
 wait_for_fmt mon:bellw '#{window_bell_flag}' 0
+assert_session_flag bell 0 bellw
 flags_lack mon:bellw '!'
 $TMUX selectw -t mon:w0 || fail "select-window w0 failed"
 
@@ -173,6 +195,7 @@ $TMUX set -g @log '' || fail "reset @log failed"
 bell mon:w0
 wait_for @log '|alert-bell:mon:w0'
 wait_for_fmt mon:w0 '#{window_bell_flag}' 1
+assert_session_flag bell 1 bellw
 $TMUX selectw -t mon:bellw || fail "select-window bellw failed"
 $TMUX selectw -t mon:w0 || fail "select-window w0 failed"
 wait_for_fmt mon:w0 '#{window_bell_flag}' 0
@@ -199,6 +222,7 @@ $TMUX neww -d -t mon: -n actw cat || fail "new-window actw failed"
 $TMUX set -g @log '' || fail "reset @log failed"
 activity mon:actw
 assert_fmt_unchanged mon:actw '#{window_activity_flag}' 0
+assert_session_flag activity 0 actw
 assert_unchanged @log ''
 
 # With monitor-activity on, output fires alert-activity and sets the
@@ -208,6 +232,7 @@ $TMUX set -wt mon:actw monitor-activity on ||
 activity mon:actw
 wait_for @log '|alert-activity:mon:actw'
 wait_for_fmt mon:actw '#{window_activity_flag}' 1
+assert_session_flag activity 1 actw
 flags_have mon:actw '#'
 
 # While the flag is set further activity does not fire the hook again.
@@ -234,6 +259,7 @@ exec 3>"$OUT/fifo"
 wait_for_fmt mon: '#{session_attached}' 1
 $TMUX selectw -t mon:actw || fail "select-window actw failed"
 wait_for_fmt mon:actw '#{window_activity_flag}' 0
+assert_session_flag activity 0 actw
 flags_lack mon:actw '#'
 $TMUX selectw -t mon:w0 || fail "select-window w0 failed"
 exec 3>&-
@@ -250,6 +276,7 @@ $TMUX set -wt mon:w0 monitor-activity on ||
 $TMUX set -g @log '' || fail "reset @log failed"
 activity mon:w0
 wait_for_fmt mon:w0 '#{window_activity_flag}' 1
+assert_session_flag activity 1 actw
 assert_unchanged @log ''
 $TMUX set -wut mon:w0 monitor-activity ||
 	fail "unset monitor-activity w0 failed"
@@ -273,16 +300,19 @@ $TMUX selectw -t mon:w0 || fail "select-window w0 failed"
 # running.
 $TMUX neww -d -t mon: -n silw cat || fail "new-window silw failed"
 assert_fmt_unchanged mon:silw '#{window_silence_flag}' 0
+assert_session_flag silence 0 silw
 $TMUX set -g @log '' || fail "reset @log failed"
 $TMUX set -wt mon:silw monitor-silence 1 || fail "set monitor-silence failed"
 wait_for @log '|alert-silence:mon:silw'
 wait_for_fmt mon:silw '#{window_silence_flag}' 1
+assert_session_flag silence 1 silw
 flags_have mon:silw '~'
 assert_unchanged @log '|alert-silence:mon:silw'
 $TMUX set -wt mon:silw monitor-silence 0 ||
 	fail "reset monitor-silence failed"
 $TMUX selectw -t mon:silw || fail "select-window silw failed"
 wait_for_fmt mon:silw '#{window_silence_flag}' 0
+assert_session_flag silence 0 silw
 flags_lack mon:silw '~'
 $TMUX selectw -t mon:w0 || fail "select-window w0 failed"
 

regress/capture-pane-time.sh

@@ -0,0 +1,38 @@
+#!/bin/sh
+
+# capture-pane -I line timestamps
+
+PATH=/bin:/usr/bin
+TERM=screen
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+TMUX="$TEST_TMUX -LtestA$$ -f/dev/null"
+TMP=$(mktemp)
+trap '$TMUX kill-server 2>/dev/null; rm -f "$TMP"' 0 1 15
+$TMUX kill-server 2>/dev/null
+
+before=$(date +%s)
+$TMUX new-session -d -x 40 -y 5 'seq 1 12; sleep 10' || exit 1
+sleep 1
+after=$(date +%s)
+
+$TMUX capture-pane -pILF -S - -E - >"$TMP" || exit 1
+awk -v before="$before" -v after="$after" '
+	$1 !~ /^-?[0-9]+$/ || $2 !~ /^[0-9]+$/ { exit 1 }
+	$4 == "1" {
+		if ($2 < before || $2 > after)
+			exit 1
+		history = 1
+	}
+	$4 == "9" {
+		if ($2 != 0)
+			exit 1
+		visible = 1
+	}
+	END { if (!history || !visible) exit 1 }
+' "$TMP" || {
+	cat "$TMP"
+	exit 1
+}
+
+exit 0

regress/choose-tree.sh

@@ -290,4 +290,92 @@ wait_count ': G4' 7
 	fail "window 1 of zzz not killed"
 exit_mode q
 
+# --- help and information preview --------------------------------------------
+# The complete tree help is taller than the 24-line test terminal, where the
+# help renderer deliberately leaves the tree unchanged.
+$TMUX2 resize-window -t out:0 -x 80 -y 50 || exit 1
+i=0
+while [ "$i" -lt 50 ]; do
+	# The inner session has a one-line status, leaving a 49-line window.
+	[ "$($TMUX display-message -p -t aaa:0 '#{window_height}')" -ge 49 ] &&
+		break
+	sleep 0.2
+	i=$((i + 1))
+done
+[ "$i" -lt 50 ] || fail "attached client did not resize for tree help"
+$TMUX choose-tree -t aaa:0 -F 'G5' -O index || exit 1
+wait_count ': G5' 7
+$TMUX2 send-keys -t out:0 F1 || fail "send-keys F1 failed"
+wait_for 'Swap current and previous window'
+# The first key closes help; the second exits the tree.
+$TMUX send-keys -t aaa:0 q q || fail "send-keys help exit failed"
+wait_mode aaa:0 0
+
+$TMUX choose-tree -t aaa:0 -F 'G6' -O index || exit 1
+wait_count ': G6' 7
+$TMUX send-keys -t aaa:0 i || fail "send-keys info failed"
+wait_for 'Session'
+$TMUX send-keys -t aaa:0 i || fail "send-keys preview failed"
+exit_mode q
+
+# --- window swapping and command prompt for current/tagged items -------------
+# Restrict a window-only tree to two disposable windows in aaa. J (the
+# Shift-Down equivalent) swaps their window objects while leaving their indexes
+# in place.
+$TMUX new-window -d -t aaa: -n swap-a 'cat' || exit 1
+$TMUX new-window -d -t aaa: -n swap-b 'cat' || exit 1
+aidx=$($TMUX list-windows -t aaa -F '#{window_index}:#{window_name}' | \
+    awk -F: '$2 == "swap-a" {print $1}')
+bidx=$($TMUX list-windows -t aaa -F '#{window_index}:#{window_name}' | \
+    awk -F: '$2 == "swap-b" {print $1}')
+$TMUX choose-tree -w -t aaa:0 -O index -F 'WT #{window_name}' \
+	-f '#{m:swap-*,#{window_name}}' || exit 1
+wait_count 'WT swap-' 2
+$TMUX send-keys -t aaa:0 g j J || fail "window tree swap failed"
+i=0
+while [ "$i" -lt 50 ]; do
+	aname=$($TMUX display-message -p -t "aaa:$aidx" '#{window_name}')
+	bname=$($TMUX display-message -p -t "aaa:$bidx" '#{window_name}')
+	[ "$aname:$bname" = 'swap-b:swap-a' ] && break
+	sleep 0.2
+	i=$((i + 1))
+done
+[ "$i" -lt 50 ] || fail "window tree did not swap the two windows"
+
+# ':' runs an entered command for the current item and rebuilds the tree when
+# its queued command completes.
+$TMUX set-option -g @tree-command '' || exit 1
+$TMUX send-keys -t aaa:0 : || fail "window tree command prompt failed"
+wait_for '(current)'
+$TMUX send-keys -t aaa:0 -l "set-option -g @tree-command '%%'" || exit 1
+$TMUX send-keys -t aaa:0 Enter || exit 1
+i=0
+while [ "$i" -lt 50 ]; do
+	value=$($TMUX show-option -gqv @tree-command)
+	[ -n "$value" ] && break
+	sleep 0.2
+	i=$((i + 1))
+done
+[ "$i" -lt 50 ] || fail "window tree entered command did not run"
+case "$value" in
+=aaa:*.) ;;
+*) fail "window tree command target was '$value'" ;;
+esac
+
+# Tag both disposable windows and kill them through the tagged confirmation
+# callback. The mode-hosting window is outside the filter and survives.
+$TMUX send-keys -t aaa:0 g j t j t X || fail "tagged kill keys failed"
+wait_for 'Kill 2 tagged?'
+$TMUX send-keys -t aaa:0 y || fail "tagged kill confirmation failed"
+i=0
+while [ "$i" -lt 50 ]; do
+	left=$($TMUX list-windows -t aaa -F '#{window_name}' | \
+	    grep -c '^swap-' || true)
+	[ "$left" -eq 0 ] && break
+	sleep 0.2
+	i=$((i + 1))
+done
+[ "$i" -lt 50 ] || fail "tagged windows were not killed"
+exit_mode q
+
 exit 0

regress/clear-on-attach.sh

@@ -0,0 +1,96 @@
+#!/bin/sh
+
+# With clear-on-attach disabled tmux must preserve the terminal contents by
+# scrolling them away, rather than entering and clearing the alternate screen.
+# Capture the bytes written by a real attached client for both settings.
+
+PATH=/bin:/usr/bin
+TERM=screen
+LC_ALL=C.UTF-8
+export PATH TERM LC_ALL
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+INNER_ON="$TEST_TMUX -LtestIon$$ -f/dev/null"
+OUTER_ON="$TEST_TMUX -LtestOon$$ -f/dev/null"
+INNER_OFF="$TEST_TMUX -LtestIoff$$ -f/dev/null"
+OUTER_OFF="$TEST_TMUX -LtestOoff$$ -f/dev/null"
+DIR=$(mktemp -d) || exit 1
+
+fail()
+{
+	echo "$*" >&2
+	exit 1
+}
+
+cleanup()
+{
+	$OUTER_ON kill-server 2>/dev/null
+	$INNER_ON kill-server 2>/dev/null
+	$OUTER_OFF kill-server 2>/dev/null
+	$INNER_OFF kill-server 2>/dev/null
+	rm -rf "$DIR"
+}
+trap cleanup 0 1 15
+
+wait_for_client()
+{
+	i=0
+	while [ "$i" -lt 50 ]; do
+		$current_inner list-clients 2>/dev/null | grep -q . && return 0
+		sleep 0.1
+		i=$((i + 1))
+	done
+	fail "inner client did not attach"
+}
+
+capture_attach()
+{
+	setting=$1
+	output=$2
+	go=$DIR/go-$setting
+	if [ "$setting" = on ]; then
+		current_inner=$INNER_ON
+		current_outer=$OUTER_ON
+	else
+		current_inner=$INNER_OFF
+		current_outer=$OUTER_OFF
+	fi
+
+	$current_inner new-session -d -s inner -x40 -y10 \
+	    'exec sleep 100' || exit 1
+	$current_inner set-option -g status off || exit 1
+	$current_inner set-option -g clear-on-attach "$setting" || exit 1
+	$current_outer new-session -d -s outer -x40 -y10 \
+	    "while [ ! -e '$go' ]; do sleep 0.01; done; exec $current_inner attach-session -t inner" || exit 1
+	$current_outer set-option -g status off || exit 1
+	$current_outer pipe-pane -O "cat >'$output'" || exit 1
+	touch "$go"
+	wait_for_client
+	sleep 0.5
+	$current_outer pipe-pane -O || exit 1
+}
+
+on=$DIR/on
+off=$DIR/off
+capture_attach on "$on"
+capture_attach off "$off"
+
+smcup=$(printf '\033[?1049h')
+grep -Fq "$smcup" "$on" || fail "clear-on-attach on did not use smcup"
+if grep -Fq "$smcup" "$off"; then
+	fail "clear-on-attach off used smcup"
+fi
+
+# Some screen terminfo entries have indn (CSI Ps S), while older ones only
+# have ind (newline). The preserving path uses indn once or repeats ind once
+# for every line in the terminal plus one.
+escape=$(printf '\033')
+if ! LC_ALL=C grep -Eq "${escape}\\[[0-9]+S" "$off"; then
+	hex=$(od -An -tx1 -v "$off" | tr -d ' \n')
+	case "$hex" in
+	*0a0a0a0a0a0a0a0a0a0a0a*) ;;
+	*) fail "clear-on-attach off did not scroll the old contents away" ;;
+	esac
+fi
+
+exit 0

regress/client-key-order-focus.sh

@@ -0,0 +1,82 @@
+#!/bin/sh
+
+# send-keys -K injects a key into a client. Commands produced by that key must
+# be inserted immediately after send-keys, before later commands in the same
+# command list. Focus events arriving between a prefix and its following key
+# must be forwarded without cancelling the prefix table.
+
+PATH=/bin:/usr/bin
+TERM=screen
+LC_ALL=C.UTF-8
+export PATH TERM LC_ALL
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+INNER="$TEST_TMUX -LtestI$$ -f/dev/null"
+OUTER="$TEST_TMUX -LtestO$$ -f/dev/null"
+
+fail()
+{
+	echo "$*" >&2
+	exit 1
+}
+
+cleanup()
+{
+	$OUTER kill-server 2>/dev/null
+	$INNER kill-server 2>/dev/null
+}
+trap cleanup 0 1 15
+
+wait_for_client()
+{
+	i=0
+	while [ "$i" -lt 50 ]; do
+		client=$($INNER list-clients -F '#{client_name}' 2>/dev/null)
+		[ -n "$client" ] && return 0
+		sleep 0.1
+		i=$((i + 1))
+	done
+	fail "inner client did not attach"
+}
+
+wait_for_option()
+{
+	option=$1
+	expected=$2
+	i=0
+	while [ "$i" -lt 50 ]; do
+		actual=$($INNER show-option -gv "$option" 2>/dev/null)
+		[ "$actual" = "$expected" ] && return 0
+		sleep 0.1
+		i=$((i + 1))
+	done
+	fail "$option is '$actual', expected '$expected'"
+}
+
+cleanup
+$INNER new-session -d -s inner -x40 -y10 'exec sleep 100' || exit 1
+$INNER set-option -g status off || exit 1
+$INNER set-option -g focus-events on || exit 1
+$OUTER new-session -d -s outer -x40 -y10 "$INNER attach -t inner" || exit 1
+$OUTER set-option -g status off || exit 1
+wait_for_client
+
+# The binding generated by send-keys -K must run before the command which
+# follows send-keys in this command list. Before the queue-ordering fix this
+# produces AB rather than BA.
+$INNER set-option -g @order '' || exit 1
+$INNER bind-key -n a set-option -gF @order '#{@order}B' || exit 1
+$INNER send-keys -K -c "$client" a \; \
+	set-option -gF @order '#{@order}A' || exit 1
+wait_for_option @order BA
+
+# Put the real attached client in the prefix table, deliver FocusIn, then the
+# bound key. FocusIn is not bindable and must not reset the prefix table.
+$INNER bind-key x set-option -g @focus-prefix yes || exit 1
+$OUTER send-keys C-b || exit 1
+focus_in=$(printf '\033[I')
+$OUTER send-keys -l "$focus_in" || exit 1
+$OUTER send-keys x || exit 1
+wait_for_option @focus-prefix yes
+
+exit 0

regress/clock-mode.sh

@@ -0,0 +1,101 @@
+#!/bin/sh
+
+# Exercise clock-mode initialization, all four styles, its one-second timer,
+# resize into the compact renderer, arbitrary-key exit, and cleanup.
+
+PATH=/bin:/usr/bin
+TERM=screen
+LC_ALL=C.UTF-8
+export PATH TERM LC_ALL
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+DIR=$(mktemp -d) || exit 1
+TMUX_TMPDIR=$DIR
+export TMUX_TMPDIR
+INNER="$TEST_TMUX -LtestI$$ -f/dev/null"
+OUTER="$TEST_TMUX -LtestO$$ -f/dev/null"
+
+fail()
+{
+	echo "$*" >&2
+	exit 1
+}
+
+cleanup()
+{
+	$OUTER kill-server 2>/dev/null
+	$INNER kill-server 2>/dev/null
+	rm -rf "$DIR"
+}
+trap cleanup 0 1 15
+
+capture()
+{
+	$OUTER capture-pane -p -t outer:0.0 2>/dev/null
+}
+
+wait_mode()
+{
+	want=$1
+	i=0
+	while [ "$i" -lt 50 ]; do
+		got=$($INNER display-message -p -t clock:0 '#{pane_mode}' 2>/dev/null)
+		[ "$got" = "$want" ] && return 0
+		sleep 0.1
+		i=$((i + 1))
+	done
+	fail "pane mode is '$got', expected '$want'"
+}
+
+wait_hashes()
+{
+	i=0
+	while [ "$i" -lt 50 ]; do
+		captured=$(capture)
+		printf '%s\n' "$captured" | grep -q '#' && return 0
+		sleep 0.1
+		i=$((i + 1))
+	done
+	fail "large clock did not render"
+}
+
+$INNER new-session -d -s clock -x80 -y24 'exec sleep 100' || exit 1
+$INNER set-option -g status off || exit 1
+$INNER set-option -g window-size manual || exit 1
+$INNER set-option -w clock-mode-colour red || exit 1
+$OUTER new-session -d -s outer -x80 -y24 "$INNER attach -t clock" || exit 1
+$OUTER set-option -g status off || exit 1
+$OUTER set-option -g window-size manual || exit 1
+sleep 1
+
+for style in 12 24 12-with-seconds 24-with-seconds; do
+	$INNER set-option -w -t clock:0 clock-mode-style "$style" || exit 1
+	$INNER clock-mode -t clock:0 || exit 1
+	wait_mode clock-mode
+	wait_hashes
+	# Let at least one timer callback observe a new second.
+	[ "$style" != 12-with-seconds ] || sleep 1.2
+	$INNER send-keys -t clock:0 x || exit 1
+	wait_mode ''
+done
+
+# Resizing an active mode below the large-glyph threshold selects the compact
+# renderer. A visible time contains a colon and no block-clock hash.
+$INNER clock-mode -t clock:0 || exit 1
+wait_mode clock-mode
+$INNER resize-window -t clock:0 -x20 -y5 || exit 1
+i=0
+while [ "$i" -lt 50 ]; do
+	captured=$(capture)
+	printf '%s\n' "$captured" | grep -Eq '[0-9][0-9]?:[0-9][0-9]' && break
+	sleep 0.1
+	i=$((i + 1))
+done
+[ "$i" -lt 50 ] || fail "compact clock did not render after resize"
+printf '%s\n' "$captured" | grep -q '#' &&
+	fail "compact clock still used large glyphs"
+$INNER send-keys -t clock:0 Enter || exit 1
+wait_mode ''
+
+$INNER has-session -t clock || fail "server died during clock-mode tests"
+exit 0

regress/codepoint-widths.sh

@@ -0,0 +1,53 @@
+#!/bin/sh
+
+# Width cache ranges must include their endpoint without overflowing wchar_t.
+
+PATH=/bin:/usr/bin
+TERM=screen
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+TMUX="$TEST_TMUX -LtestA$$ -f/dev/null"
+SERVER=
+WATCHDOG=
+
+cleanup()
+{
+	if [ -n "$WATCHDOG" ]; then
+		kill "$WATCHDOG" 2>/dev/null
+		wait "$WATCHDOG" 2>/dev/null
+	fi
+	[ -n "$SERVER" ] && kill -9 "$SERVER" 2>/dev/null
+}
+trap cleanup 0
+trap 'exit 1' 1 2 15
+
+$TMUX new-session -d 'exec sleep 60' || exit 1
+SERVER=$($TMUX display-message -p '#{pid}') || exit 1
+
+# kill-server cannot stop a server stuck rebuilding the width cache.
+(
+	sleep 5
+	kill -9 "$SERVER" 2>/dev/null
+) &
+WATCHDOG=$!
+
+$TMUX set -g codepoint-widths 'U+1F600=2' || exit 1
+
+# Cover both signed and unsigned 32-bit wchar_t. Values above WCHAR_MAX
+# are ignored by the parser on platforms where they cannot be represented.
+for value in U+7FFFFFFF=1 U+7FFFFFFE-U+7FFFFFFF=2 \
+    U+FFFFFFFF=1 U+FFFFFFFE-U+FFFFFFFF=2; do
+	$TMUX set -g codepoint-widths "$value" || exit 1
+	[ "$($TMUX display-message -p alive)" = alive ] || exit 1
+done
+
+# Check that an ordinary range still includes both endpoints and stops there.
+$TMUX set -g codepoint-widths 'U+03B1-U+03B3=2' || exit 1
+$TMUX set -g @text 'αβγδ' || exit 1
+[ "$($TMUX display-message -p '#{w:@text}')" = 7 ] || exit 1
+$TMUX set -gu codepoint-widths || exit 1
+[ "$($TMUX display-message -p '#{w:@text}')" = 4 ] || exit 1
+
+$TMUX kill-server || exit 1
+SERVER=
+exit 0

regress/confirm-before-lock.sh

@@ -0,0 +1,150 @@
+#!/bin/sh
+
+# Exercise confirm-before's waiting and background callbacks, custom keys and
+# prompts, default-yes handling and errors. Also cover all three lock command
+# entry points with a harmless lock-command which leaves a marker.
+
+PATH=/bin:/usr/bin
+TERM=screen
+LC_ALL=C.UTF-8
+export PATH TERM LC_ALL
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+DIR=$(mktemp -d) || exit 1
+TMUX_TMPDIR=$DIR
+export TMUX_TMPDIR
+INNER="$TEST_TMUX -LtestI$$ -f/dev/null"
+OUTER="$TEST_TMUX -LtestO$$ -f/dev/null"
+
+fail()
+{
+	echo "$*" >&2
+	exit 1
+}
+
+cleanup()
+{
+	$OUTER kill-server 2>/dev/null
+	$INNER kill-server 2>/dev/null
+	rm -rf "$DIR"
+}
+trap cleanup 0 1 15
+
+capture()
+{
+	$OUTER capture-pane -p -t outer:0.0 2>/dev/null
+}
+
+wait_capture()
+{
+	marker=$1
+	i=0
+	while [ "$i" -lt 50 ]; do
+		captured=$(capture)
+		printf '%s\n' "$captured" | grep -Fq "$marker" && return 0
+		sleep 0.1
+		i=$((i + 1))
+	done
+	fail "timed out waiting for '$marker'"
+}
+
+wait_option()
+{
+	want=$1
+	i=0
+	while [ "$i" -lt 50 ]; do
+		got=$($INNER show-option -gqv @confirmed 2>/dev/null)
+		[ "$got" = "$want" ] && return 0
+		sleep 0.1
+		i=$((i + 1))
+	done
+	fail "@confirmed is '$got', expected '$want'"
+}
+
+wait_file()
+{
+	marker=$1
+	i=0
+	while [ "$i" -lt 50 ]; do
+		[ -f "$marker" ] && return 0
+		sleep 0.1
+		i=$((i + 1))
+	done
+	fail "lock command did not create $marker"
+}
+
+$INNER new-session -d -s test -x80 -y24 'exec sleep 100' || exit 1
+$INNER set-option -g status on || exit 1
+$INNER set-option -g status-position bottom || exit 1
+$INNER set-option -g window-size manual || exit 1
+$OUTER new-session -d -s outer -x80 -y24 "$INNER attach -t test" || exit 1
+$OUTER set-option -g status off || exit 1
+$OUTER set-option -g window-size manual || exit 1
+sleep 1
+
+client=$($INNER list-clients -F '#{client_name}')
+[ -n "$client" ] || fail "inner client did not attach"
+
+$INNER bind-key -n M-a confirm-before \
+	'set-option -g @confirmed accepted' || exit 1
+$INNER bind-key -n M-b confirm-before -b -p 'Background?' \
+	'set-option -g @confirmed background' || exit 1
+$INNER bind-key -n M-c confirm-before -c x -p 'Custom?' \
+	'set-option -g @confirmed custom' || exit 1
+$INNER bind-key -n M-y confirm-before -y -p 'Default?' \
+	'set-option -g @confirmed default' || exit 1
+
+# A non-confirming response closes the waiting prompt without running its
+# command; reopening and accepting inserts the command after the waiting item.
+$INNER set-option -g @confirmed sentinel || exit 1
+$OUTER send-keys M-a || exit 1
+wait_capture "Confirm 'set-option'? (y/n)"
+$OUTER send-keys n || exit 1
+sleep 0.2
+wait_option sentinel
+$OUTER send-keys M-a || exit 1
+wait_capture "Confirm 'set-option'? (y/n)"
+$OUTER send-keys y || exit 1
+wait_option accepted
+
+# -b has no waiting queue item and appends its command to the client queue.
+$OUTER send-keys M-b || exit 1
+wait_capture 'Background?'
+$OUTER send-keys y || exit 1
+wait_option background
+
+# A custom printable key is accepted, and -y makes Enter affirmative.
+$OUTER send-keys M-c || exit 1
+wait_capture 'Custom?'
+$OUTER send-keys x || exit 1
+wait_option custom
+$OUTER send-keys M-y || exit 1
+wait_capture 'Default?'
+$OUTER send-keys Enter || exit 1
+wait_option default
+
+# Reject invalid multi-character and control confirmation keys.
+if $INNER confirm-before -b -t "$client" -c xx 'display-message x' \
+    >/dev/null 2>&1; then
+	fail "multi-character confirm key was accepted"
+fi
+if $INNER confirm-before -b -t "$client" -c "$(printf '\001')" \
+    'display-message x' >/dev/null 2>&1; then
+	fail "control confirm key was accepted"
+fi
+
+# lock-client, lock-session and lock-server all send lock-command to the real
+# attached client. The command returns immediately and unlocks the client.
+for kind in client session server; do
+	marker="$DIR/locked-$kind"
+	$INNER set-option -t test lock-command "printf locked >$marker" || exit 1
+	case "$kind" in
+	client) $INNER lock-client -t "$client" || exit 1 ;;
+	session) $INNER lock-session -t test || exit 1 ;;
+	server) $INNER lock-server || exit 1 ;;
+	esac
+	wait_file "$marker"
+done
+
+$INNER has-session -t test || fail "server died during prompt or lock tests"
+exit 0

regress/control-client-exit-stalled.sh

@@ -17,7 +17,7 @@ PATH=/bin:/usr/bin
 TERM=screen
 
 [ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
-TMUX="$TEST_TMUX -Ltest"
+TMUX="$TEST_TMUX -Ltest$$"
 $TMUX kill-server 2>/dev/null
 
 DIR=$(mktemp -d)

regress/control-client-exit.sh

@@ -19,7 +19,7 @@ PATH=/bin:/usr/bin
 TERM=screen
 
 [ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
-TMUX="$TEST_TMUX -Ltest"
+TMUX="$TEST_TMUX -Ltest$$"
 $TMUX kill-server 2>/dev/null
 
 DIR=$(mktemp -d)

regress/control-client-new-layouts.sh

@@ -0,0 +1,123 @@
+#!/bin/sh
+
+# Check that control client flags are available in every format expansion path
+# used to produce layouts. The layout strings themselves are tested separately.
+
+PATH=/bin:/usr/bin
+TERM=screen
+LC_ALL=C.UTF-8
+LANG=C.UTF-8
+export PATH TERM LC_ALL LANG
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+TMUX="$TEST_TMUX -LtestA$$ -f/dev/null"
+
+DIR=$(mktemp -d) || exit 1
+FIFO=$DIR/input
+OUT=$DIR/output
+CFG=$DIR/flags.conf
+PID=
+
+fail()
+{
+	echo "$*" >&2
+	exit 1
+}
+
+cleanup()
+{
+	exec 3>&-
+	[ -n "$PID" ] && kill "$PID" 2>/dev/null
+	$TMUX kill-server 2>/dev/null
+	rm -rf "$DIR"
+}
+trap cleanup EXIT
+
+wait_for()
+{
+	pattern=$1
+	i=0
+
+	while [ "$i" -lt 50 ]; do
+		grep -F -- "$pattern" "$OUT" >/dev/null 2>&1 && return 0
+		if [ -n "$PID" ] && ! kill -0 "$PID" 2>/dev/null; then
+			fail "control client exited waiting for: $pattern"
+		fi
+		sleep 0.1
+		i=$((i + 1))
+	done
+	fail "missing: $pattern"
+}
+
+send()
+{
+	printf '%s\n' "$*" >&3
+}
+
+check_commands()
+{
+	name=$1
+	expected=$2
+	match='#{m:*new-layouts*,#{client_flags}}'
+
+	send "display-message -p 'DISPLAY-$name $match'"
+	wait_for "DISPLAY-$name $expected"
+	send "list-panes -F 'PANES-$name $match'"
+	wait_for "PANES-$name $expected"
+	send "list-windows -F 'WINDOWS-$name $match'"
+	wait_for "WINDOWS-$name $expected"
+	send "list-sessions -F 'SESSIONS-$name $match'"
+	wait_for "SESSIONS-$name $expected"
+	send "list-clients -F 'CLIENTS-$name $match'"
+	wait_for "CLIENTS-$name $expected"
+}
+
+check_config()
+{
+	name=$1
+	expected=$2
+
+	send "source-file '$CFG'"
+	send "display-message -p 'CONFIG-$name #{@config-new-layouts}'"
+	wait_for "CONFIG-$name $expected"
+}
+
+cat >"$CFG" <<'EOF'
+%if #{m:*new-layouts*,#{client_flags}}
+set-option -g @config-new-layouts 1
+%else
+set-option -g @config-new-layouts 0
+%endif
+EOF
+
+$TMUX kill-server 2>/dev/null
+$TMUX new-session -d -s layouts -x 80 -y 24 || exit 1
+$TMUX split-window -h -t layouts: || exit 1
+
+mkfifo "$FIFO" || exit 1
+: >"$OUT"
+$TMUX -C attach-session -t layouts <"$FIFO" >"$OUT" 2>&1 &
+PID=$!
+exec 3>"$FIFO"
+
+send 'display-message -p READY'
+wait_for READY
+
+check_commands OFF 0
+check_config OFF 0
+
+send 'refresh-client -f new-layouts'
+check_commands ON 1
+check_config ON 1
+
+send 'refresh-client -f !new-layouts'
+check_commands OFF-AGAIN 0
+check_config OFF-AGAIN 0
+
+# The list commands also run for unattached command clients. Supplying that
+# client to formats must not make the session loop dereference a NULL session.
+$TMUX list-sessions -F '#{S:all,active}' >/dev/null ||
+	fail "session loop failed for unattached command client"
+$TMUX has-session -t layouts || fail "server exited"
+
+exit 0

regress/control-client-popup.sh

@@ -0,0 +1,63 @@
+#!/bin/sh
+
+# Popups require a tty overlay and cannot be displayed by a control client.
+# A popup command from control mode must be ignored cleanly, leaving the
+# client command queue and server usable.
+
+PATH=/bin:/usr/bin
+TERM=screen
+export PATH TERM
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+TMUX="$TEST_TMUX -LtestA$$ -f/dev/null"
+DIR=$(mktemp -d) || exit 1
+FIFO=$DIR/input
+OUT=$DIR/output
+RAN=$DIR/popup-ran
+
+fail()
+{
+	echo "$*" >&2
+	exit 1
+}
+
+cleanup()
+{
+	exec 3>&-
+	$TMUX kill-server 2>/dev/null
+	rm -rf "$DIR"
+}
+trap cleanup 0 1 15
+
+mkfifo "$FIFO" || exit 1
+$TMUX new-session -d -s control -x40 -y10 'exec sleep 100' || exit 1
+$TMUX -C attach-session -t control <"$FIFO" >"$OUT" 2>&1 &
+control_pid=$!
+exec 3>"$FIFO"
+
+i=0
+while [ "$i" -lt 50 ]; do
+	$TMUX list-clients -F '#{client_flags}' 2>/dev/null |
+	    grep -q 'control-mode' && break
+	sleep 0.1
+	i=$((i + 1))
+done
+[ "$i" -lt 50 ] || fail "control client did not attach"
+
+printf '%s\n' "display-popup -E 'touch $RAN'" >&3
+printf '%s\n' "display-message -p CONTROL-POPUP-ALIVE" >&3
+
+i=0
+while [ "$i" -lt 50 ]; do
+	grep -q 'CONTROL-POPUP-ALIVE' "$OUT" 2>/dev/null && break
+	if ! kill -0 "$control_pid" 2>/dev/null; then
+		fail "control client exited after display-popup"
+	fi
+	sleep 0.1
+	i=$((i + 1))
+done
+[ "$i" -lt 50 ] || fail "command after control-client popup did not run"
+$TMUX has-session -t control || fail "server exited after control-client popup"
+[ ! -e "$RAN" ] || fail "control client started a popup command"
+
+exit 0

regress/control-client-run-shell-exit.sh

@@ -0,0 +1,38 @@
+#!/bin/sh
+
+# A waited run-shell command can complete after a control client has closed its
+# input and exited. The command queue still references the client until the job
+# callback runs, but control_stop has already destroyed c->control_state. Late
+# command output must be discarded instead of dereferencing the stopped control
+# state and killing the server.
+
+PATH=/bin:/usr/bin
+TERM=screen
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+TMUX="$TEST_TMUX -Ltest$$"
+$TMUX kill-server 2>/dev/null
+
+OUT=$(mktemp)
+trap "$TMUX kill-server 2>/dev/null; rm -f $OUT" 0 1 15
+
+$TMUX -f/dev/null new-session -d -s main || exit 1
+
+printf '%s\n' 'run-shell "sleep 0.2; echo TEST"' |
+	$TMUX -f/dev/null -C >"$OUT" 2>&1
+
+sleep 1
+
+$TMUX has-session -t main 2>/dev/null || {
+	echo "server exited after late run-shell output"
+	cat "$OUT"
+	exit 1
+}
+
+grep -q '^%exit' "$OUT" || {
+	echo "control client did not exit"
+	cat "$OUT"
+	exit 1
+}
+
+exit 0

regress/control-client-sanity.sh

@@ -30,8 +30,11 @@ killw
 EOF
 sleep 1
 $TMUX has || exit 1
-$TMUX lsp -aF '#{pane_id} #{window_layout}' >$TMP || exit 1
-cat <<EOF|cmp -s $TMP - || exit 1
+# Use a control client to request legacy layouts, keeping only pane lines
+# from the control protocol output.
+$TMUX -C lsp -aF '#{pane_id} #{window_layout}' |
+	grep '^%[0-9]' >$TMP || exit 1
+cat <<EOF|cmp $TMP - || exit 1
 %0 f5ab,200x200,0,0[200x50,0,0,0,200x149,0,51,3]
 %3 f5ab,200x200,0,0[200x50,0,0,0,200x149,0,51,3]
 %2 dcbd,200x200,0,0[200x100,0,0,2,200x99,0,101,4]

regress/control-client-wait-exit.sh

@@ -10,7 +10,7 @@ PATH=/bin:/usr/bin
 TERM=screen
 
 [ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
-TMUX="$TEST_TMUX -Ltest"
+TMUX="$TEST_TMUX -Ltest$$"
 $TMUX kill-server 2>/dev/null
 
 FIFO=$(mktemp -u)

regress/copy-mode-commands.sh

@@ -0,0 +1,253 @@
+#!/bin/sh
+
+# Exercise the broad non-mouse copy-mode command surface: navigation, search,
+# jumps, state toggles, line/end-of-line copies, append, and pipe variants.
+
+PATH=/bin:/usr/bin
+TERM=screen
+LC_ALL=C.UTF-8
+export PATH TERM LC_ALL
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+DIR=$(mktemp -d) || exit 1
+TMUX_TMPDIR=$DIR
+export TMUX_TMPDIR
+TMUX="$TEST_TMUX -Ltest$$ -f/dev/null"
+
+fail()
+{
+	echo "$*" >&2
+	exit 1
+}
+
+cleanup()
+{
+	$TMUX kill-server 2>/dev/null
+	rm -rf "$DIR"
+}
+trap cleanup 0 1 15
+
+x()
+{
+	$TMUX send-keys -t copy:0 -X "$@" || fail "copy command failed: $*"
+}
+
+wait_mode()
+{
+	want=$1
+	i=0
+	while [ "$i" -lt 50 ]; do
+		got=$($TMUX display-message -p -t copy:0 '#{pane_in_mode}' 2>/dev/null)
+		[ "$got" = "$want" ] && return 0
+		sleep 0.1
+		i=$((i + 1))
+	done
+	fail "pane_in_mode is '$got', expected '$want'"
+}
+
+fresh()
+{
+	$TMUX copy-mode -t copy:0 || exit 1
+	wait_mode 1
+	x history-top
+	x start-of-line
+}
+
+select_text()
+{
+	fresh
+	x begin-selection
+	x cursor-right
+	x cursor-right
+}
+
+$TMUX new-session -d -s copy -x40 -y8 \
+    "sh -c 'i=0; while [ \$i -lt 40 ]; do printf \"  line-%02d needle (a[b]c) end\\n\" \$i; i=\$((i + 1)); done; printf \"\\nparagraph two needle\\n\\nparagraph three\\n\"; printf \"\\033]133;A\\007prompt-one\\n\\033]133;C\\007output-one\\n\\033]133;A\\007prompt-two\\n\\033]133;C\\007output-two\\n\"; exec sleep 100'" ||
+	exit 1
+$TMUX set-option -g status off || exit 1
+$TMUX set-option -g history-limit 200 || exit 1
+
+i=0
+while [ "$i" -lt 50 ]; do
+	history=$($TMUX display-message -p -t copy:0 '#{history_size}')
+	[ "$history" -ge 30 ] && break
+	sleep 0.1
+	i=$((i + 1))
+done
+[ "$i" -lt 50 ] || fail "history did not fill"
+
+fresh
+
+# Copy-mode-specific format callbacks expose the word, line, hyperlink and
+# active search match at the cursor.
+formats=$($TMUX display-message -p -t copy:0 \
+    '#{copy_cursor_word}|#{copy_cursor_line}|#{copy_cursor_hyperlink}|#{search_match}') ||
+	exit 1
+[ -n "$formats" ] || fail "copy-mode cursor formats were empty"
+
+# Cursor, viewport and paragraph commands. Each is asserted by successful
+# dispatch and the final mode-liveness check; detailed word/selection geometry
+# is covered by the existing copy-mode tests.
+for command in back-to-indentation bottom-line top-line middle-line \
+    cursor-centre-vertical cursor-centre-horizontal end-of-line history-bottom \
+    history-top halfpage-down halfpage-up page-down page-up next-paragraph \
+    previous-paragraph next-matching-bracket previous-matching-bracket; do
+	x "$command"
+done
+x goto-line 15
+x set-mark
+x cursor-down
+x jump-to-mark
+
+# OSC 133 prompt and output markers support shell-integration navigation.
+x history-top
+x next-prompt
+case "$($TMUX display-message -p -t copy:0 '#{copy_cursor_line}')" in
+*prompt-one*) ;;
+*) fail "next-prompt did not find prompt-one" ;;
+esac
+x next-prompt
+x previous-prompt
+case "$($TMUX display-message -p -t copy:0 '#{copy_cursor_line}')" in
+*prompt-one*) ;;
+*) fail "previous-prompt did not return to prompt-one" ;;
+esac
+x next-prompt -o
+case "$($TMUX display-message -p -t copy:0 '#{copy_cursor_line}')" in
+*output-one*) ;;
+*) fail "next-prompt -o did not find output-one" ;;
+esac
+
+# Character jumps remember their direction and character for repeat/reverse.
+x jump-forward e
+x jump-again
+x jump-reverse
+x jump-backward e
+x jump-to-forward e
+x jump-to-backward e
+
+# Direct, text and incremental searches cover both directions and the saved
+# search used by again/reverse.
+x search-forward needle
+x search-again
+x search-reverse
+x search-backward needle
+x search-forward-text needle
+x search-backward-text needle
+x search-forward-incremental '=needle'
+x search-forward-incremental '+needle'
+x search-backward-incremental '=needle'
+x search-backward-incremental '-needle'
+
+# Stateful display and behaviour toggles.
+for command in rectangle-on rectangle-off rectangle-toggle \
+    line-numbers-on line-numbers-off line-numbers-toggle \
+    refresh-on refresh-now refresh-off refresh-toggle \
+    scroll-exit-on scroll-exit-off scroll-exit-toggle toggle-position; do
+	x "$command"
+done
+wait_mode 1
+x cancel
+wait_mode 0
+
+# Line and end-of-line copy commands work without an explicit selection.
+fresh
+x select-line
+x copy-selection-and-cancel
+case "$($TMUX show-buffer)" in
+*line-00*) ;;
+*) fail "select-line did not select the current line" ;;
+esac
+
+fresh
+x copy-line
+[ -n "$($TMUX show-buffer)" ] || fail "copy-line produced an empty buffer"
+x cancel
+
+fresh
+x copy-end-of-line
+[ -n "$($TMUX show-buffer)" ] || fail "copy-end-of-line produced an empty buffer"
+x cancel
+
+# Append variants retain or close the mode as advertised.
+$TMUX set-buffer -b append-buffer prefix || exit 1
+select_text
+x append-selection
+appended=$($TMUX show-buffer -b append-buffer)
+case "$appended" in
+prefix*) ;;
+*) fail "append-selection produced '$appended'" ;;
+esac
+x cancel
+
+$TMUX set-buffer -b append-cancel-buffer prefix || exit 1
+select_text
+x append-selection-and-cancel
+wait_mode 0
+appended=$($TMUX show-buffer -b append-cancel-buffer)
+case "$appended" in
+prefix*) ;;
+*) fail "append-selection-and-cancel produced '$appended'" ;;
+esac
+
+# The explicit cancel variants close copy mode.
+fresh
+x copy-line-and-cancel
+wait_mode 0
+fresh
+x copy-end-of-line-and-cancel
+wait_mode 0
+select_text
+x copy-selection-and-cancel
+wait_mode 0
+
+# Pipe wrappers have distinct command handlers. /dev/null keeps the test
+# deterministic while exercising asynchronous pipe job creation and cleanup.
+fresh
+x copy-pipe-line 'cat >/dev/null'
+x cancel
+fresh
+x copy-pipe-line-and-cancel 'cat >/dev/null'
+wait_mode 0
+fresh
+x copy-pipe-end-of-line 'cat >/dev/null'
+x cancel
+fresh
+x copy-pipe-end-of-line-and-cancel 'cat >/dev/null'
+wait_mode 0
+
+select_text
+x copy-pipe-no-clear 'cat >/dev/null'
+x pipe-no-clear 'cat >/dev/null'
+x copy-pipe 'cat >/dev/null'
+x pipe 'cat >/dev/null'
+x cancel
+select_text
+x copy-pipe-and-cancel 'cat >/dev/null'
+wait_mode 0
+select_text
+x pipe-and-cancel 'cat >/dev/null'
+wait_mode 0
+
+# Commands which cancel on downward movement have separate handlers.
+fresh
+x history-bottom
+x bottom-line
+x cursor-down-and-cancel
+wait_mode 0
+fresh
+x history-bottom
+x halfpage-down-and-cancel
+wait_mode 0
+fresh
+x history-bottom
+x page-down-and-cancel
+wait_mode 0
+fresh
+x history-bottom
+x bottom-line
+x scroll-down-and-cancel
+wait_mode 0
+
+$TMUX has-session -t copy || fail "server died during copy-mode commands"
+exit 0

regress/copy-mode-selection-mode.sh

@@ -0,0 +1,81 @@
+#!/bin/sh
+
+# Changing an existing character selection to line mode must reset both ends
+# to complete lines, including when the cursor subsequently crosses the fixed
+# end. An invalid regular-expression search must also discard marks left by a
+# previous successful search.
+
+PATH=/bin:/usr/bin
+TERM=screen
+LC_ALL=C.UTF-8
+export PATH TERM LC_ALL
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+TMUX="$TEST_TMUX -LtestA$$ -f/dev/null"
+
+fail()
+{
+	echo "$*" >&2
+	exit 1
+}
+
+cleanup()
+{
+	$TMUX kill-server 2>/dev/null
+}
+trap cleanup 0 1 15
+
+$TMUX new-session -d -x30 -y6 \
+	"printf 'alpha\nbeta\ngamma\ndelta\n'; exec sleep 100" || exit 1
+$TMUX set-option -g window-size manual || exit 1
+sleep 1
+
+# A valid regular-expression search creates marks. Replacing it with an
+# invalid expression, growing the mode, and scrolling must not leave an old
+# mark array indexed with the new geometry (the original bug was an ASan heap
+# overflow in this sequence).
+$TMUX copy-mode || exit 1
+$TMUX send-keys -X history-top || exit 1
+$TMUX send-keys -X search-forward beta || exit 1
+[ "$($TMUX display-message -p '#{search_present}')" = 1 ] ||
+	fail "successful search did not create marks"
+$TMUX send-keys -X search-forward '[' || exit 1
+$TMUX resize-window -x40 -y8 || exit 1
+$TMUX send-keys -X scroll-down || exit 1
+[ "$($TMUX display-message -p '#{search_present}')" = 0 ] ||
+	fail "invalid regular expression left stale marks after resize"
+$TMUX send-keys -X cancel || exit 1
+
+# Select part of alpha through part of beta, then change the existing
+# selection to line mode. Both lines, and no partial columns, must be copied.
+$TMUX copy-mode || exit 1
+$TMUX send-keys -X history-top || exit 1
+$TMUX send-keys -N2 -X cursor-right || exit 1
+$TMUX send-keys -X begin-selection || exit 1
+$TMUX send-keys -X cursor-down || exit 1
+$TMUX send-keys -N2 -X cursor-right || exit 1
+$TMUX send-keys -X selection-mode line || exit 1
+[ "$($TMUX display-message -p '#{selection_mode}')" = line ] ||
+	fail "selection did not change to line mode"
+$TMUX send-keys -X copy-selection || exit 1
+expected=$(printf 'alpha\nbeta')
+[ "$($TMUX show-buffer)" = "$expected" ] ||
+	fail "line-mode selection did not expand to complete lines"
+
+# Start with the cursor above the fixed end so selection-mode itself takes the
+# reverse-direction path, then extend it through another line.
+$TMUX copy-mode || exit 1
+$TMUX send-keys -X history-top || exit 1
+$TMUX send-keys -N2 -X cursor-down || exit 1
+$TMUX send-keys -N2 -X cursor-right || exit 1
+$TMUX send-keys -X begin-selection || exit 1
+$TMUX send-keys -X cursor-up || exit 1
+$TMUX send-keys -N2 -X cursor-right || exit 1
+$TMUX send-keys -X selection-mode line || exit 1
+$TMUX send-keys -X cursor-up || exit 1
+$TMUX send-keys -X copy-selection || exit 1
+expected=$(printf 'alpha\nbeta\ngamma')
+[ "$($TMUX show-buffer)" = "$expected" ] ||
+	fail "reversed line-mode selection did not keep complete lines"
+
+exit 0

regress/display-panes.sh

@@ -153,11 +153,13 @@ wait_format "$p0" '#{pane_in_mode}' '0'
 wait_option @picked "$p1"
 
 # Commands after display-panes run immediately while the mode remains.
+# Record the mode in the same command queue so client startup cannot race
+# the 500ms timeout.
 $TMUX set -g @after none || fail "set @after failed"
-$TMUX display-panes -Nd 500 -t "$p0" \; set -g @after fast ||
+$TMUX display-panes -Nd 500 -t "$p0" \; \
+    set -gF -t "$p0" @after '#{pane_mode}' ||
 	fail "display-panes immediate command failed"
-wait_option @after fast
-wait_format "$p0" '#{pane_mode}' 'panes-mode'
+wait_option @after 'panes-mode'
 wait_format "$p0" '#{pane_in_mode}' '0'
 
 # Existing zoom is restored on exit.

regress/find-window.sh

@@ -0,0 +1,118 @@
+#!/bin/sh
+
+# Exercise find-window's content, name and title filters in every combination,
+# glob/regex and case-insensitive suffixes, plus zoom restoration.
+
+PATH=/bin:/usr/bin
+TERM=screen
+LC_ALL=C.UTF-8
+export PATH TERM LC_ALL
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+DIR=$(mktemp -d) || exit 1
+TMUX_TMPDIR=$DIR
+export TMUX_TMPDIR
+INNER="$TEST_TMUX -LtestI$$ -f/dev/null"
+OUTER="$TEST_TMUX -LtestO$$ -f/dev/null"
+
+fail()
+{
+	echo "$*" >&2
+	exit 1
+}
+
+cleanup()
+{
+	$OUTER kill-server 2>/dev/null
+	$INNER kill-server 2>/dev/null
+	rm -rf "$DIR"
+}
+trap cleanup 0 1 15
+
+capture()
+{
+	$OUTER capture-pane -p -t outer:0.0 2>/dev/null
+}
+
+wait_mode()
+{
+	want=$1
+	i=0
+	while [ "$i" -lt 50 ]; do
+		got=$($INNER display-message -p -t find:base.0 '#{pane_mode}' 2>/dev/null)
+		[ "$got" = "$want" ] && return 0
+		sleep 0.1
+		i=$((i + 1))
+	done
+	fail "pane mode is '$got', expected '$want'"
+}
+
+run_find()
+{
+	label=$1
+	expected=$2
+	shift 2
+	$INNER find-window -t find:base.0 "$@" || fail "$label failed"
+	wait_mode tree-mode
+	i=0
+	while [ "$i" -lt 50 ]; do
+		captured=$(capture)
+		printf '%s\n' "$captured" | grep -Fq "$expected" && break
+		sleep 0.1
+		i=$((i + 1))
+	done
+	[ "$i" -lt 50 ] || fail "$label did not show '$expected'"
+	$INNER send-keys -t find:base.0 q || exit 1
+	wait_mode ''
+}
+
+$INNER new-session -d -s find -n base -x80 -y24 \
+	"sh -c 'printf \"BaseBody\\n\"; exec sleep 100'" || exit 1
+$INNER split-window -d -h -t find:base \
+	"sh -c 'printf \"OtherBody\\n\"; exec sleep 100'" || exit 1
+$INNER new-window -d -t find: -n NameNeedle 'exec sleep 100' || exit 1
+$INNER new-window -d -t find: -n body \
+	"sh -c 'printf \"BodyNeedle\\n\"; exec sleep 100'" || exit 1
+$INNER new-window -d -t find: -n titled 'exec sleep 100' || exit 1
+$INNER select-pane -t find:titled.0 -T TitleNeedle || exit 1
+$INNER set-option -g status off || exit 1
+$INNER set-option -g window-size manual || exit 1
+$OUTER new-session -d -s outer -x80 -y24 "$INNER attach -t find:base" || exit 1
+$OUTER set-option -g status off || exit 1
+$OUTER set-option -g window-size manual || exit 1
+sleep 1
+
+# Wait until the body text is in the pane history before searching it.
+i=0
+while [ "$i" -lt 50 ]; do
+	$INNER capture-pane -p -t find:body.0 | grep -Fq BodyNeedle && break
+	sleep 0.1
+	i=$((i + 1))
+done
+[ "$i" -lt 50 ] || fail "pane content was not ready"
+
+# No flags means C+N+T. Then cover all three pairs and all three singletons.
+run_find default NameNeedle NameNeedle
+run_find content-name NameNeedle -C -N NameNeedle
+run_find content-title titled -C -T TitleNeedle
+run_find name-title titled -N -T TitleNeedle
+run_find content-only body -C BodyNeedle
+run_find name-only NameNeedle -N NameNeedle
+run_find title-only titled -T TitleNeedle
+
+# Glob case folding and all regular-expression suffix variants.
+run_find insensitive NameNeedle -N -i nameneedle
+run_find regex NameNeedle -N -r '^NameNeedle$'
+run_find regex-insensitive NameNeedle -N -r -i '^nameneedle$'
+
+# -Z temporarily zooms the target window and restores its prior state on exit.
+$INNER find-window -Z -t find:base.0 -N NameNeedle || exit 1
+wait_mode tree-mode
+[ "$($INNER display-message -p -t find:base '#{window_zoomed_flag}')" = 1 ] ||
+	fail "find-window -Z did not zoom"
+$INNER send-keys -t find:base.0 q || exit 1
+wait_mode ''
+[ "$($INNER display-message -p -t find:base '#{window_zoomed_flag}')" = 0 ] ||
+	fail "find-window -Z did not restore zoom"
+
+exit 0

regress/floating-pane-geometry.sh

@@ -268,5 +268,149 @@ $TMUX kill-pane -t "$floating" || exit 1
 $TMUX kill-pane -t "$right" || exit 1
 $TMUX kill-pane -t "$lower" || exit 1
 
+# --- Floating panes clamped when the window shrinks (issue #5581, PR #5582) ---
+#
+# layout_resize clamps floating panes back inside the window when it shrinks:
+# move them and, only if they cannot fit, shrink them (never below
+# PANE_MINIMUM). A floating cell is the pane's content, so with the default
+# single-line border the clamp counts 1 cell of border per side, exactly as
+# layout_floating_args_parse does on creation; with no border it counts 0.
+# Each case below gets its own window, since resize-window fixes a window at
+# a manual size for the rest of its life.
+
+# Case 1: a lone floating pane -- break-pane -W on a window's only pane --
+# takes the early-return path in layout_resize, added during PR #5582's
+# review round, since there is no tiled tree to walk.
+win=$($TMUX new-window -dPF '#{window_id}') ||
+	fail "new-window for lone float failed"
+
+# -x 20 -y 6 -> pane 18x4; -X 60 -Y 18 -> pane_left 61, pane_top 19: with the
+# border, the footprint is columns 60-79, rows 18-23, flush with the 80x24
+# window's right and bottom edges, so the float fits before it is shrunk.
+$TMUX break-pane -W -s "$win" -x 20 -y 6 -X 60 -Y 18 ||
+	fail "break-pane -W for lone float failed"
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_width}')"  18
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_height}')" 4
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_left}')"   61
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_top}')"    19
+
+# Shrink to 40x16. The float still fits at its own size (18 <= 40-2, 4 <=
+# 16-2) so only its position moves, flush to the new right/bottom edges:
+# xoff = 40 - 18 - 1 = 21; yoff = 16 - 4 - 1 = 11.
+$TMUX resize-window -t "$win" -x 40 -y 16 ||
+	fail "resize-window (lone float) failed"
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_width}')"  18
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_height}')" 4
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_left}')"   21
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_top}')"    11
+
+# Case 5: grow the window back. The clamp must not chase the window back
+# outward -- it only ever pulls a float in, never restores where it was.
+$TMUX resize-window -t "$win" -x 80 -y 24 ||
+	fail "resize-window grow (lone float) failed"
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_width}')"  18
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_height}')" 4
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_left}')"   21
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_top}')"    11
+$TMUX kill-window -t "$win" || exit 1
+
+# Case 2: the same float, but with a tiled sibling surviving alongside it, so
+# the window's root cell stays tiled and layout_resize takes the normal path
+# (the clamp call after layout_fix_offsets) instead of the early return
+# above. Same geometry as case 1, so the same numbers should come out.
+win=$($TMUX new-window -dPF '#{window_id}') ||
+	fail "new-window for tiled sibling failed"
+$TMUX split-window -t "$win" 'sleep 100' ||
+	fail "split-window for tiled sibling failed"
+$TMUX break-pane -W -s "$win" -x 20 -y 6 -X 60 -Y 18 ||
+	fail "break-pane -W for tiled sibling failed"
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_width}')"  18
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_height}')" 4
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_left}')"   61
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_top}')"    19
+
+$TMUX resize-window -t "$win" -x 40 -y 16 ||
+	fail "resize-window (tiled sibling) failed"
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_width}')"  18
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_height}')" 4
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_left}')"   21
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_top}')"    11
+$TMUX kill-window -t "$win" || exit 1
+
+# Case 3: new-pane float, the original repro from issue #5581 and the PR
+# body -- also the normal path, via the tiled base pane new-window creates.
+win=$($TMUX new-window -dPF '#{window_id}') ||
+	fail "new-window for new-pane repro failed"
+$TMUX resize-window -t "$win" -x 120 -y 40 ||
+	fail "resize-window to 120x40 failed"
+
+# -x 30 -y 10 -> pane 28x8; -X 85 -Y 25 -> pane_left 86, pane_top 26.
+floating=$($TMUX new-pane -t "$win" -dPF '#{pane_id}' \
+	-x 30 -y 10 -X 85 -Y 25 'sleep 100') ||
+	fail "new-pane for new-pane repro failed"
+must_equal "$($TMUX display-message -p -t "$floating" '#{pane_width}')"  28
+must_equal "$($TMUX display-message -p -t "$floating" '#{pane_height}')" 8
+must_equal "$($TMUX display-message -p -t "$floating" '#{pane_left}')"   86
+must_equal "$($TMUX display-message -p -t "$floating" '#{pane_top}')"    26
+
+# Shrink to 60x20: xoff = 60 - 28 - 1 = 31; yoff = 20 - 8 - 1 = 11.
+$TMUX resize-window -t "$win" -x 60 -y 20 ||
+	fail "resize-window (new-pane repro) failed"
+must_equal "$($TMUX display-message -p -t "$floating" '#{pane_width}')"  28
+must_equal "$($TMUX display-message -p -t "$floating" '#{pane_height}')" 8
+must_equal "$($TMUX display-message -p -t "$floating" '#{pane_left}')"   31
+must_equal "$($TMUX display-message -p -t "$floating" '#{pane_top}')"    11
+$TMUX kill-window -t "$win" || exit 1
+
+# Case 4: a float that already fits inside the shrunk window is left alone --
+# assert position and size are both unchanged, not just one of them.
+win=$($TMUX new-window -dPF '#{window_id}') ||
+	fail "new-window for untouched float failed"
+
+# -x 20 -y 6 -> pane 18x4; -X 8 -Y 3 -> pane_left 9, pane_top 4 (as at the top
+# of this file). Footprint columns 8-27, rows 3-8: well inside 60x20 too.
+floating=$($TMUX new-pane -t "$win" -dPF '#{pane_id}' \
+	-x 20 -y 6 -X 8 -Y 3 'sleep 100') ||
+	fail "new-pane for untouched float failed"
+must_equal "$($TMUX display-message -p -t "$floating" '#{pane_width}')"  18
+must_equal "$($TMUX display-message -p -t "$floating" '#{pane_height}')" 4
+must_equal "$($TMUX display-message -p -t "$floating" '#{pane_left}')"   9
+must_equal "$($TMUX display-message -p -t "$floating" '#{pane_top}')"    4
+
+$TMUX resize-window -t "$win" -x 60 -y 20 ||
+	fail "resize-window (untouched float) failed"
+must_equal "$($TMUX display-message -p -t "$floating" '#{pane_width}')"  18
+must_equal "$($TMUX display-message -p -t "$floating" '#{pane_height}')" 4
+must_equal "$($TMUX display-message -p -t "$floating" '#{pane_left}')"   9
+must_equal "$($TMUX display-message -p -t "$floating" '#{pane_top}')"    4
+$TMUX kill-window -t "$win" || exit 1
+
+# Case 6: pad = 0, via the pane-border-lines window option set to none. The
+# border arithmetic differs here (no -2/+1 adjustment either on creation or
+# in the clamp).
+win=$($TMUX new-window -dPF '#{window_id}') ||
+	fail "new-window for pad=0 float failed"
+$TMUX set-option -w -t "$win" pane-border-lines none ||
+	fail "set pane-border-lines none failed"
+
+# No border: -x 20 -y 6 -> pane 20x6 directly; -X 60 -Y 18 -> pane_left 60,
+# pane_top 18 directly. Footprint (== content, no border) is columns 60-79,
+# rows 18-23: flush right/bottom of the 80x24 window, same as case 1.
+$TMUX break-pane -W -s "$win" -x 20 -y 6 -X 60 -Y 18 ||
+	fail "break-pane -W for pad=0 float failed"
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_width}')"  20
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_height}')" 6
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_left}')"   60
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_top}')"    18
+
+# Shrink to 40x16 with pad=0: xoff = 40 - 20 - 0 = 20; yoff = 16 - 6 - 0 = 10.
+$TMUX resize-window -t "$win" -x 40 -y 16 ||
+	fail "resize-window (pad=0 float) failed"
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_width}')"  20
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_height}')" 6
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_left}')"   20
+must_equal "$($TMUX display-message -p -t "$win" '#{pane_top}')"    10
+$TMUX kill-window -t "$win" || exit 1
+
 $TMUX kill-server 2>/dev/null
 exit 0

regress/floating-pane-zoom.sh

@@ -0,0 +1,158 @@
+#!/bin/sh
+
+# Moving, resizing and reordering an over-zoom float must leave the tiled
+# pane zoomed, and the changes must survive an explicit unzoom.
+
+PATH=/bin:/usr/bin
+TERM=screen
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+TMUX="$TEST_TMUX -LtestA$$ -f/dev/null"
+trap '$TMUX kill-server 2>/dev/null' 0
+trap 'exit 1' 1 2 15
+
+fail()
+{
+	echo "$*" >&2
+	exit 1
+}
+
+run()
+{
+	$TMUX "$@" || fail "failed: $*"
+}
+
+check()
+{
+	got=$(run display-message -p -t "$1" "$2") || exit 1
+	[ "$got" = "$3" ] || fail "$1 $2: got '$got', expected '$3'"
+}
+
+check_zoom()
+{
+	check "$base" '#{window_zoomed_flag}:#{pane_zoomed_flag}' '1:1'
+	check "$float" '#{pane_floating_flag}:#{pane_active}' "1:$active"
+	check "$base" '#{@unzoomed}' ''
+}
+
+run new-session -d -x 80 -y 24
+base=$(run display-message -p '#{pane_id}') || exit 1
+other=$(run split-window -dPF '#{pane_id}') || exit 1
+layout=$(run display-message -p '#{window_layout}') || exit 1
+run set-hook -g window-unzoomed 'set -g @unzoomed 1'
+
+# Cover creation before and after zoom, with both the float and the tiled
+# pane active. Modal panes use the same over-zoom flag.
+for mode in before after detached modal; do
+	if [ "$mode" != before ]; then
+		run resize-pane -Z -t "$base"
+	fi
+	case "$mode" in
+	detached) flags=-Ad; active=0 ;;
+	modal) flags=-O; active=1 ;;
+	*) flags=-A; active=1 ;;
+	esac
+	float=$(run new-pane "$flags" -PF '#{pane_id}' -t "$base" \
+	    -x 20 -y 8 -X 8 -Y 3 '') || exit 1
+	if [ "$mode" = before ]; then
+		run resize-pane -Z -t "$base"
+	fi
+	run set -gu @unzoomed
+	check_zoom
+
+	run move-pane -t "$float" -D
+	check "$float" '#{pane_top}' 5
+	check_zoom
+	run move-pane -t "$float" -U 2 -R 3 -L 1
+	check "$float" '#{pane_left}:#{pane_top}' '11:3'
+	check_zoom
+	run move-pane -t "$float" -X 25% -Y 25%
+	check "$float" '#{pane_left}:#{pane_top}' '21:7'
+	check_zoom
+	run move-pane -t "$float" -P bottom-right
+	check "$float" '#{pane_left}:#{pane_top}' '61:17'
+	check_zoom
+	run resize-pane -t "$float" -x 30 -y 10
+	check "$float" '#{pane_width}:#{pane_height}' '28:8'
+	check_zoom
+	run resize-pane -t "$float" -U 1 -L 2
+	check "$float" '#{pane_left}:#{pane_top}:#{pane_width}:#{pane_height}' \
+	    '59:16:30:9'
+	check_zoom
+	run move-pane -t "$float" -P centre
+	check "$float" '#{pane_left}:#{pane_top}' '25:7'
+	check_zoom
+
+	# Failed commands must not change zoom either.
+	for command in 'move-pane -D invalid' 'move-pane -P invalid' \
+	    'move-pane -z invalid' 'resize-pane -x invalid' \
+	    'resize-pane -D invalid'; do
+		$TMUX $command -t "$float" 2>/dev/null &&
+		    fail "unexpected success: $command"
+		check_zoom
+	done
+
+	run resize-pane -Z -t "$base"
+	check "$float" '#{pane_left}:#{pane_top}:#{pane_width}:#{pane_height}' \
+	    '25:7:30:9'
+	run kill-pane -t "$float"
+	check "$base" '#{window_layout}' "$layout"
+done
+
+# Put an ordinary (hidden while zoomed) float between two over-zoom floats
+# in the stacking order. Reordering must skip it when counting visible
+# positions, but keep all floats ahead of the tiled panes after unzoom.
+back=$(run new-pane -AdPF '#{pane_id}' -t "$base" '') || exit 1
+hidden=$(run new-pane -dPF '#{pane_id}' -t "$base" '') || exit 1
+float=$(run new-pane -AdPF '#{pane_id}' -t "$base" '') || exit 1
+active=0
+run resize-pane -Z -t "$base"
+run set -gu @unzoomed
+
+for position in backward back forward-loop; do
+	run move-pane -t "$float" -P front
+	run move-pane -t "$float" -P "$position"
+	check "$float" '#{pane_z}' 1
+	check "$back" '#{pane_z}' 0
+	check_zoom
+done
+for position in forward front backward-loop; do
+	run move-pane -t "$float" -P back
+	run move-pane -t "$float" -P "$position"
+	check "$float" '#{pane_z}' 0
+	check "$back" '#{pane_z}' 1
+	check_zoom
+done
+for z in 1 0 99; do
+	run move-pane -t "$float" -z "$z"
+	want=$z
+	[ "$z" = 99 ] && want=1
+	check "$float" '#{pane_z}' "$want"
+	check_zoom
+done
+run resize-pane -Z -t "$base"
+check "$float" '#{pane_z}' 2
+check "$base" '#{pane_z}' 4
+run kill-pane -t "$hidden"
+run kill-pane -t "$back"
+
+# Explicit zoom toggling and operations on tiled panes retain their
+# existing behaviour. The over-zoom flag alone does not make a pane a float:
+# zooming the float itself gives it a tiled cell until unzoom.
+run resize-pane -Z -t "$float"
+check "$float" '#{pane_zoomed_flag}:#{pane_floating_flag}' '1:0'
+run resize-pane -t "$float" -x 25
+check "$float" '#{window_zoomed_flag}:#{pane_floating_flag}:#{pane_width}' \
+    '0:1:23'
+run resize-pane -Z -t "$base"
+run resize-pane -t "$other" -D 1
+check "$base" '#{window_zoomed_flag}' 0
+
+# A hidden ordinary float must still be unzoomed before resizing it.
+hidden=$(run new-pane -dPF '#{pane_id}' -t "$base" '') || exit 1
+run resize-pane -Z -t "$base"
+run resize-pane -t "$hidden" -x 25
+check "$hidden" '#{window_zoomed_flag}:#{pane_floating_flag}:#{pane_width}' \
+    '0:1:23'
+
+exit 0

regress/format-fuzzy.sh

@@ -7,6 +7,8 @@ TERM=screen
 
 [ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
 TMUX="$TEST_TMUX -LtestA$$ -f/dev/null"
+trap '$TMUX kill-server 2>/dev/null' 0
+trap 'exit 1' 1 2 15
 
 # test_format $format $expected_result
 test_format()

regress/format-modifiers.sh

@@ -18,6 +18,24 @@ export TZ LANG LC_ALL
 
 [ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
 TMUX="$TEST_TMUX -LtestA$$ -f/dev/null"
+FIFO1="${TMPDIR:-/tmp}/fmt-l-$$-1"
+FIFO2="${TMPDIR:-/tmp}/fmt-l-$$-2"
+HOLD1=
+HOLD2=
+CC1=
+CC2=
+
+cleanup()
+{
+	for pid in $HOLD1 $HOLD2 $CC1 $CC2; do
+		kill "$pid" 2>/dev/null
+		wait "$pid" 2>/dev/null
+	done
+	$TMUX kill-server 2>/dev/null
+	rm -f "$FIFO1" "$FIFO2"
+}
+trap cleanup 0
+trap 'exit 1' 1 2 15
 
 ESC=$(printf '\033')
 
@@ -579,8 +597,6 @@ assert_alive "verbose loop expansion"
 
 # L loops over attached clients.  Attach two control-mode clients, each held
 # open by a background process keeping a FIFO's write end open.
-FIFO1="${TMPDIR:-/tmp}/fmt-l-$$-1"
-FIFO2="${TMPDIR:-/tmp}/fmt-l-$$-2"
 rm -f "$FIFO1" "$FIFO2"
 mkfifo "$FIFO1" "$FIFO2" || exit 1
 # Hold the write ends open so the control clients stay attached.
@@ -605,9 +621,9 @@ test_format "#{L/nr:x}" "xx"
 test_format "#{L/r:x}" "xx"
 # Now detach one and confirm the count drops to one.
 kill $HOLD2 2>/dev/null
+wait $HOLD2 2>/dev/null
+HOLD2=
 sleep 1
 test_format "#{L:x}" "x"
-kill $HOLD1 $CC1 $CC2 2>/dev/null
-rm -f "$FIFO1" "$FIFO2"
 
 exit 0

regress/format-strings.sh

@@ -7,6 +7,8 @@ TERM=screen
 
 [ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
 TMUX="$TEST_TMUX -LtestA$$ -f/dev/null"
+trap '$TMUX kill-server 2>/dev/null' 0
+trap 'exit 1' 1 2 15
 
 # test_format $format $expected_result
 test_format()

regress/format-variables.sh

@@ -71,7 +71,10 @@ cursor_very_visible
 cursor_x
 cursor_y
 history_all_bytes
+history_added
 history_bytes
+history_collected
+history_generation
 history_limit
 history_size
 host
@@ -103,6 +106,11 @@ pane_at_right
 pane_at_top
 pane_bg
 pane_bottom
+pane_command_duration
+pane_command_end_time
+pane_command_running
+pane_command_start_time
+pane_command_status
 pane_current_command
 pane_current_path
 pane_dead
@@ -120,16 +128,21 @@ pane_index
 pane_input_off
 pane_key_mode
 pane_last
+pane_last_output_time
+pane_last_prompt_time
 pane_left
 pane_marked
 pane_marked_set
+pane_modal_flag
 pane_mode
+pane_output_generation
 pane_path
 pane_pb_progress
 pane_pb_state
 pane_pid
 pane_pipe
 pane_pipe_pid
+pane_private_modes
 pane_right
 pane_search_string
 pane_start_command
@@ -141,6 +154,8 @@ pane_title
 pane_top
 pane_tty
 pane_unseen_changes
+pane_unzoomed_height
+pane_unzoomed_width
 pane_width
 pane_x
 pane_y
@@ -206,7 +221,10 @@ window_layout
 window_linked
 window_linked_sessions
 window_linked_sessions_list
+window_manual_height
+window_manual_width
 window_marked_flag
+window_modal_pane
 window_name
 window_offset_x
 window_offset_y

regress/hooks-lifecycle.sh

@@ -76,14 +76,14 @@ $TMUX set-hook -g session-closed \
 	fail "set-hook session-closed failed"
 
 # The only pane of the only window of a session exits: pane-exited, then
-# window-unlinked, then session-closed, each seeing the dead object in the
+# session-closed, then window-unlinked, each seeing the dead object in the
 # hook formats.
 pane=$($TMUX new -d -s doomed -n dwin -P -F '#{pane_id}' 'true') ||
 	fail "new-session doomed failed"
 wait_for @log \
-	"|pane-exited:$pane|window-unlinked:doomed:dwin|session-closed:doomed"
+	"|pane-exited:$pane|session-closed:doomed|window-unlinked:doomed:dwin"
 assert_unchanged @log \
-	"|pane-exited:$pane|window-unlinked:doomed:dwin|session-closed:doomed"
+	"|pane-exited:$pane|session-closed:doomed|window-unlinked:doomed:dwin"
 
 # The dead pane, window and session cannot be used as targets but the
 # server survives.
@@ -110,14 +110,14 @@ $TMUX set-hook -g pane-exited \
 	'set -gF @log "#{@log}|pane-exited:#{hook_pane}"' ||
 	fail "restore pane-exited hook failed"
 
-# kill-window on the last window: window-unlinked then session-closed but
+# kill-window on the last window: session-closed then window-unlinked but
 # no pane-exited for the panes in the killed window.
 $TMUX set -g @log '' || fail "reset @log failed"
 $TMUX new -d -s doomed2 -n dwin2 || fail "new-session doomed2 failed"
 $TMUX splitw -d -t doomed2:0 || fail "split-window doomed2 failed"
 $TMUX kill-window -t doomed2:0 || fail "kill-window failed"
-wait_for @log '|window-unlinked:doomed2:dwin2|session-closed:doomed2'
-assert_unchanged @log '|window-unlinked:doomed2:dwin2|session-closed:doomed2'
+wait_for @log '|session-closed:doomed2|window-unlinked:doomed2:dwin2'
+assert_unchanged @log '|session-closed:doomed2|window-unlinked:doomed2:dwin2'
 $TMUX has -t main || fail "server died after kill-window chain"
 
 # kill-session: session-closed fires first, then window-unlinked for its

regress/hooks-notify.sh

@@ -218,11 +218,13 @@ $TMUX set-hook -gu pane-mode-changed || fail "unset pane-mode-changed failed"
 
 # pane-exited when a pane's command exits with remain-on-exit off.
 $TMUX set -g @x 0 || fail "set @x failed"
-$TMUX set-hook -g pane-exited 'set -gF @x "#{hook}:#{hook_pane}"' ||
+$TMUX set-hook -g pane-exited \
+	'set -gF @x "#{hook}:#{hook_pane}:#{hook_exit_status}:#{hook_exit_success}"' ||
 	fail "set-hook pane-exited failed"
-pane=$($TMUX splitw -d -t main:0 -P -F '#{pane_id}' 'true') ||
-	fail "split-window true failed"
-wait_for @x "pane-exited:$pane"
+pane=$($TMUX splitw -d -t main:0 -P -F '#{pane_id}' \
+	'trap "" HUP; exec </dev/null >/dev/null 2>&1; sleep 1; exit 42') ||
+	fail "split-window exit 42 failed"
+wait_for @x "pane-exited:$pane:42:0"
 $TMUX set-hook -gu pane-exited || fail "unset pane-exited failed"
 
 # pane-died when a pane's command exits with remain-on-exit on.

regress/if-shell-error.sh

@@ -12,7 +12,8 @@ $TMUX kill-server 2>/dev/null
 
 TMP=$(mktemp)
 OUT=$(mktemp)
-trap "rm -f $TMP $OUT" 0 1 15
+trap 'rm -f "$TMP" "$OUT"; $TMUX kill-server 2>/dev/null' 0
+trap 'exit 1' 1 2 15
 
 cat <<EOF >$TMP
 if 'true' 'wibble wobble'

regress/input-common.inc

@@ -4,6 +4,9 @@ TERM=screen
 [ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
 TMUX="$TEST_TMUX -LtestA$$ -f/dev/null"
 
+# Keep panes alive until the next case or cleanup, without reading replies.
+INPUT_HOLD='while :; do sleep 3600; done'
+
 TMP=$(mktemp)
 EXP=$(mktemp)
 trap 'rm -f "$TMP" "$EXP"; $TMUX kill-server 2>/dev/null' 0 1 15
@@ -37,10 +40,10 @@ start_pane_hlimit()
 
 	$TMUX kill-server 2>/dev/null
 	sleep 0.1
-	$TMUX new-session -d -x 1 -y 1 -s test-setup "sleep 2" || exit 1
+	$TMUX new-session -d -x 1 -y 1 -s test-setup "$INPUT_HOLD" || exit 1
 	$TMUX set-option -g history-limit "$hlimit" || exit 1
 	$TMUX new-session -d -x "$sx" -y "$sy" -s "$name" \
-	    "printf '$seq'; sleep 2" || exit 1
+	    "printf '$seq'; $INPUT_HOLD" || exit 1
 	$TMUX kill-session -t test-setup
 	sleep 0.3
 }

regress/input-keys.sh

@@ -22,7 +22,19 @@ assert_key () {
 	      clear-history -t$W \; \
 	      send-keys -t$W "$key" 'EOL' || exit 1
 
-	actual_code=$($TMUX capturep -pt$W | \
+	# cat echoes the keys back asynchronously, so wait for the EOL marker
+	# to reach the pane instead of capturing straight away.
+	i=0
+	while [ $i -lt 50 ]; do
+		screen=$($TMUX capturep -pt$W)
+		case "$screen" in
+		*EOL*) break ;;
+		esac
+		i=$((i + 1))
+		sleep 0.1
+	done
+
+	actual_code=$(printf '%s\n' "$screen" | \
 			      head -1 | \
 			      sed -e 's/EOL.*$//')
 

regress/input-malformed.sh

@@ -2,6 +2,38 @@
 
 . ./input-common.inc
 
+# Wait for the terminator and following text to reach the parser.
+check_discard()
+{
+	name=$1
+	printf 'OK\n' >"$EXP"
+	i=0
+	while [ "$i" -lt 300 ]; do
+		capture_grid "$name" >"$TMP"
+		cmp -s "$TMP" "$EXP" && return 0
+		sleep 0.05
+		i=$((i + 1))
+	done
+	fail "$name (timed out waiting for discard)"
+}
+
+# The missing-terminator timer may expire before the string limit is reached
+# on a slow build. Clear any payload printed after the timeout, then check
+# that the string did not change the title and normal output has resumed.
+test_discard()
+{
+	name=$1
+	prefix=$2
+	start_cmd "$name" 8 3 "$INPUT_HOLD"
+	$TMUX select-pane -T discard-test || exit 1
+	$TMUX respawn-pane -k \
+	    "perl -e 'print qq{$prefix}, q{x} x 1100000, qq{\e\\\\\e[H\e[2JOK}'; $INPUT_HOLD" || exit 1
+	check_discard "$name"
+	$TMUX display-message -p -t "$name:" '#{pane_title}' >"$TMP" || exit 1
+	printf 'discard-test\n' >"$EXP"
+	cmp "$TMP" "$EXP" || fail "$name title"
+}
+
 start_cmd csi-param-discard 8 3 \
     "perl -e 'print qq{\e[}, q{1} x 80, qq{\030OK}'; sleep 2"
 check_capture csi-param-discard 'OK'
@@ -10,13 +42,8 @@ start_cmd csi-interm-discard 8 3 \
     "perl -e 'print qq{\e[    \030OK}'; sleep 2"
 check_capture csi-interm-discard 'OK'
 
-start_cmd osc-discard 8 3 \
-    "perl -e 'print qq{\e]2;}, q{x} x 1100000, qq{\e\\\\OK}'; sleep 2"
-check_capture osc-discard 'OK'
-
-start_cmd apc-discard 8 3 \
-    "perl -e 'print qq{\e_}, q{x} x 1100000, qq{\e\\\\OK}'; sleep 2"
-check_capture apc-discard 'OK'
+test_discard osc-discard '\e]2;'
+test_discard apc-discard '\e_'
 
 start_pane unknown-csi 8 3 '\033[?9999zOK'
 check_capture unknown-csi 'OK'

regress/input-scroll.sh

@@ -51,7 +51,7 @@ $TMUX kill-server 2>/dev/null
 sleep 0.1
 $TMUX new-session -d -x 5 -y 3 -s history \; \
     set-option -g history-limit 3 \; \
-    respawn-pane -k "printf '01\n02\n03\n04\n05\n06'; sleep 2" || exit 1
+    respawn-pane -k "printf '01\n02\n03\n04\n05\n06'; $INPUT_HOLD" || exit 1
 sleep 0.3
 $TMUX capture-pane -pN -t history: -S - -E - | normalize_capture >"$TMP"
 printf "%s\n" '01

regress/json.sh

@@ -0,0 +1,137 @@
+#!/bin/sh
+
+# Test parsing and printing JSON with display-message -j.
+
+PATH=/bin:/usr/bin
+TERM=screen
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+TMUX="$TEST_TMUX -LtestA$$ -f/dev/null"
+$TMUX kill-server 2>/dev/null
+
+fail()
+{
+	echo "$1"
+	$TMUX kill-server 2>/dev/null
+	exit 1
+}
+
+check()
+{
+	actual=$($TMUX display-message -plj "$1" 2>&1) ||
+	    fail "JSON was rejected: $1: $actual"
+	[ "$actual" = "$2" ] ||
+	    fail "JSON output mismatch: $1: expected $2, got $actual"
+}
+
+check_fail()
+{
+	if $TMUX display-message -plj "$1" >/dev/null 2>&1; then
+		fail "invalid JSON was accepted: $1"
+	fi
+}
+
+$TMUX new-session -d || exit 1
+
+check '{}' '{}'
+check ' { "z":true, "a":-9223372036854775808, "m":[{}, {"x":false}] } ' \
+    '{"a":-9223372036854775808,"m":[{},{"x":false}],"z":true}'
+check '{"max":9223372036854775807,"min":-9223372036854775808}' \
+    '{"max":9223372036854775807,"min":-9223372036854775808}'
+check '{" key":" value","{key":"[value"}' \
+    '{" key":" value","{key":"[value"}'
+check '{"brace":"{value","bracket":"[value","colon":":value",'\
+'"comma":",value","space":" value"}' \
+    '{"brace":"{value","bracket":"[value","colon":":value",'\
+'"comma":",value","space":" value"}'
+check '{"esc":"\"\\\/\b\f\n\r\t\u0041"}' \
+    '{"esc":"\"\\\/\b\f\n\r\t\u0041"}'
+check '{"unicode":"\u0123\uabcd\uABCD"}' \
+    '{"unicode":"\u0123\uabcd\uABCD"}'
+
+actual=$($TMUX display-message -palj '{}' 2>&1) ||
+    fail "display-message -aj rejected JSON: $actual"
+[ "$actual" = '{}' ] ||
+    fail "display-message -aj did not ignore -a: got $actual"
+actual=$($TMUX display-message -pIlj '{}' 2>&1) ||
+    fail "display-message -Ij rejected JSON: $actual"
+[ "$actual" = '{}' ] ||
+    fail "display-message -Ij did not ignore -I: got $actual"
+
+check_fail ''
+check_fail '   '
+check_fail '[]'
+check_fail 'true'
+check_fail '1'
+check_fail '"string"'
+check_fail '{}{}'
+
+check_fail '{'
+check_fail '{x:1}'
+check_fail '{"":1}'
+check_fail '{"x" 1}'
+check_fail '{"x",1}'
+check_fail '{"x":}'
+check_fail '{"x":,}'
+check_fail '{"x":1'
+check_fail '{"x":1 "y":2}'
+check_fail '{"x":1,,"y":2}'
+check_fail '{"x":1,}'
+check_fail '{"x":1,"x":2}'
+check_fail '{"x":{}}{}'
+check_fail '{"x":{}} trailing'
+check_fail '{"x":{'
+check_fail '{"x":{}'
+
+check_fail '{"x":['
+check_fail '{"x":[}'
+check_fail '{"x":[{}'
+check_fail '{"x":[{},}'
+check_fail '{"x":[{},]}'
+check_fail '{"x":[{}{}]}'
+check_fail '{"x":[{},,{}]}'
+check_fail '{"x":[{"y":}]}'
+check_fail '{"x":""}'
+check_fail '{"x":null}'
+check_fail '{"x":[null]}'
+check_fail '{"x":[true]}'
+check_fail '{"x":["string"]}'
+check_fail '{"x":[[]]}'
+check_fail '{"x":1.0}'
+check_fail '{"x":1e2}'
+check_fail '{"x":+1}'
+check_fail '{"x":-}'
+check_fail '{"x":0x10}'
+check_fail '{"x":01}'
+check_fail '{"x":-01}'
+check_fail '{"x":[1]}'
+check_fail '{"x":9223372036854775808}'
+check_fail '{"x":-9223372036854775809}'
+check_fail '{"x":tru}'
+check_fail '{"x":True}'
+check_fail '{"x":falsee}'
+check_fail '{"x":"bad\q"}'
+check_fail '{"x":"bad\x20"}'
+check_fail '{"x":"bad\u123"}'
+check_fail '{"x":"bad\u12x4"}'
+check_fail '{"x":"unterminated}'
+check_fail '{"x":"escaped quote\"}'
+check_fail '{"x":"line
+break"}'
+
+# The maximum object nesting depth is 200.
+json='{}'
+n=1
+while [ "$n" -lt 200 ]; do
+	json='{"x":'"$json"'}'
+	n=$((n + 1))
+done
+check "$json" "$json"
+check_fail '{"x":'"$json"'}'
+
+if $TMUX display-message -pj >/dev/null 2>&1; then
+	fail "display-message -j accepted a missing message"
+fi
+
+$TMUX kill-server 2>/dev/null
+exit 0

regress/kill-session-zoomed.sh

@@ -0,0 +1,28 @@
+#!/bin/sh
+
+# Killing a session whose window is zoomed must not crash the server:
+# window_destroy used to unzoom the window, which resized the panes and
+# fired pane-resized with the window in the payload, and releasing that
+# reference destroyed the window a second time.
+
+PATH=/bin:/usr/bin
+TERM=screen
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+TMUX="$TEST_TMUX -LtestA$$ -f/dev/null"
+$TMUX kill-server 2>/dev/null
+
+$TMUX -f/dev/null new -d -sfoo || exit 1
+$TMUX split-window -d -h -tfoo:0 || exit 1
+$TMUX resize-pane -Z -tfoo:0 || exit 1
+$TMUX new -d -sbar || exit 1
+$TMUX kill-session -tfoo || exit 1
+$TMUX has-session -tbar || exit 1
+
+# The same with the zoomed window in a session killed by kill-server.
+$TMUX new -d -sbaz || exit 1
+$TMUX split-window -d -v -tbaz:0 || exit 1
+$TMUX resize-pane -Z -tbaz:0 || exit 1
+$TMUX kill-server || exit 1
+
+exit 0

regress/layout-nesting-limit.sh

@@ -0,0 +1,77 @@
+#!/bin/sh
+
+# Version 1 layouts must reject excessive nesting without losing the session or
+# changing its layout. Check both split types and the depth limit boundary.
+
+PATH=/bin:/usr/bin
+TERM=screen
+export PATH TERM
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+DIR=$(mktemp -d) || exit 1
+TMUX="$TEST_TMUX -S$DIR/socket -f/dev/null"
+
+fail()
+{
+	echo "$*" >&2
+	exit 1
+}
+
+cleanup()
+{
+	$TMUX kill-server 2>/dev/null
+	rm -rf "$DIR"
+}
+trap cleanup 0
+trap 'exit 1' 1 2 15
+
+# Generate a checksum-valid v1 layout with one child in every nested group.
+layout()
+{
+	awk -v depth="$1" -v open="$2" 'BEGIN {
+		closing = (open == "{" ? "}" : "]")
+		body = ""
+		for (i = 0; i < depth; i++)
+			body = body "1x1,0,0" open
+		body = body "1x1,0,0"
+		for (i = 0; i < depth; i++)
+			body = body closing
+
+		ord["0"] = 48; ord["1"] = 49; ord["x"] = 120
+		ord[","] = 44; ord["{"] = 123; ord["}"] = 125
+		ord["["] = 91; ord["]"] = 93
+		csum = 0
+		for (i = 1; i <= length(body); i++) {
+			c = substr(body, i, 1)
+			bit = csum % 2
+			csum = int(csum / 2) + bit * 32768
+			csum = (csum + ord[c]) % 65536
+		}
+		printf "%04x,%s", csum, body
+	}'
+}
+
+$TMUX new-session -d -s deep -x80 -y24 'exec sleep 100' || exit 1
+
+for open in '{' '['; do
+	# A valid checksum and nesting up to the limit must still be accepted.
+	value=$(layout 1000 "$open") || fail "could not generate layout"
+	$TMUX select-layout -t deep "$value" ||
+		fail "layout at the depth limit was rejected ($open)"
+	before=$($TMUX display-message -p -t deep \
+	    '#{pane_id} #{pane_width} #{pane_height} #{window_layout}') || exit 1
+
+	for depth in 1001 1500; do
+		value=$(layout "$depth" "$open") || fail "could not generate layout"
+		$TMUX select-layout -t deep "$value" >/dev/null 2>&1 &&
+			fail "excessive nesting was accepted ($open, $depth)"
+		$TMUX has-session -t deep ||
+			fail "server died on excessive nesting ($open, $depth)"
+		after=$($TMUX display-message -p -t deep \
+		    '#{pane_id} #{pane_width} #{pane_height} #{window_layout}') || exit 1
+		[ "$before" = "$after" ] ||
+			fail "pane or layout changed after rejection ($open, $depth)"
+	done
+done
+
+exit 0

regress/layout-set.sh

@@ -0,0 +1,126 @@
+#!/bin/sh
+
+# Exercise every predefined layout, next/previous cycling, lookup and restore
+# paths, one-pane early returns, minimum-size handling and floating panes.
+
+PATH=/bin:/usr/bin
+TERM=screen
+export PATH TERM
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+DIR=$(mktemp -d) || exit 1
+TMUX_TMPDIR=$DIR
+export TMUX_TMPDIR
+TMUX="$TEST_TMUX -Ltest$$ -f/dev/null"
+SEEN="$DIR/layouts"
+
+fail()
+{
+	echo "$*" >&2
+	exit 1
+}
+
+cleanup()
+{
+	$TMUX kill-server 2>/dev/null
+	rm -rf "$DIR"
+}
+trap cleanup 0 1 15
+
+layout()
+{
+	$TMUX display-message -p -t layouts:many '#{window_layout}'
+}
+
+check_layout()
+{
+	name=$1
+	$TMUX select-layout -t layouts:many "$name" ||
+		fail "select-layout $name failed"
+	value=$(layout)
+	[ -n "$value" ] || fail "$name produced an empty layout"
+	if grep -Fxq "$value" "$SEEN"; then
+		fail "$name produced the same layout as an earlier preset"
+	fi
+	printf '%s\n' "$value" >>"$SEEN"
+	[ "$($TMUX list-panes -t layouts:many -F x | wc -l)" -eq 5 ] ||
+		fail "$name lost a pane"
+	[ "$($TMUX list-panes -t layouts:many -F '#{pane_floating_flag}' | \
+	    grep -c '^1$')" -eq 1 ] || fail "$name did not preserve the floating pane"
+}
+
+$TMUX new-session -d -s layouts -n many -x100 -y40 'exec sleep 100' || exit 1
+$TMUX set-option -g window-size manual || exit 1
+$TMUX split-window -d -h -t layouts:many 'exec sleep 100' || exit 1
+$TMUX split-window -d -v -t layouts:many 'exec sleep 100' || exit 1
+$TMUX split-window -d -h -t layouts:many 'exec sleep 100' || exit 1
+floating=$($TMUX new-pane -dP -F '#{pane_id}' -t layouts:many \
+    -x20 -y8 -X10 -Y5 'exec sleep 100') || exit 1
+: >"$SEEN"
+
+# Options exercise percentage and explicit secondary-size calculations.
+$TMUX set-option -w -t layouts:many main-pane-height 30% || exit 1
+$TMUX set-option -w -t layouts:many other-pane-height 12 || exit 1
+$TMUX set-option -w -t layouts:many main-pane-width 35% || exit 1
+$TMUX set-option -w -t layouts:many other-pane-width 20 || exit 1
+
+for name in even-horizontal even-vertical main-horizontal \
+    main-horizontal-mirrored main-vertical main-vertical-mirrored tiled; do
+	check_layout "$name"
+done
+
+# Exact and unique-prefix lookup work; ambiguous and invalid names fail.
+$TMUX select-layout -t layouts:many even-h || fail "unique layout prefix failed"
+$TMUX select-layout -t layouts:many main >/dev/null 2>&1 &&
+	fail "ambiguous layout prefix succeeded"
+$TMUX select-layout -t layouts:many no-such-layout >/dev/null 2>&1 &&
+	fail "invalid layout name succeeded"
+
+# Cycle through all layouts in both directions, including wraparound. The
+# aliases and select-layout flags share layout_set_next/previous.
+first=$(layout)
+i=0
+while [ "$i" -lt 7 ]; do
+	$TMUX next-layout -t layouts:many || exit 1
+	i=$((i + 1))
+done
+[ "$(layout)" = "$first" ] || fail "next-layout did not wrap"
+i=0
+while [ "$i" -lt 7 ]; do
+	$TMUX previous-layout -t layouts:many || exit 1
+	i=$((i + 1))
+done
+[ "$(layout)" = "$first" ] || fail "previous-layout did not wrap"
+$TMUX select-layout -t layouts:many -n || exit 1
+$TMUX select-layout -t layouts:many -p || exit 1
+
+# No argument reapplies the last preset; -o restores the previous layout; -E
+# spreads the current cell without changing the pane set.
+$TMUX kill-pane -t "$floating" || exit 1
+$TMUX select-layout -t layouts:many tiled || exit 1
+tiled=$(layout)
+$TMUX select-layout -t layouts:many even-horizontal || exit 1
+$TMUX select-layout -t layouts:many -o || exit 1
+[ "$(layout)" = "$tiled" ] || fail "select-layout -o did not restore layout"
+$TMUX select-layout -t layouts:many || exit 1
+$TMUX select-layout -t layouts:many -E || exit 1
+
+# Each arranger has a deliberate one-pane early return.
+$TMUX new-window -d -t layouts: -n one 'exec sleep 100' || exit 1
+one=$($TMUX display-message -p -t layouts:one '#{window_layout}')
+for name in even-horizontal even-vertical main-horizontal \
+    main-horizontal-mirrored main-vertical main-vertical-mirrored tiled; do
+	$TMUX select-layout -t layouts:one "$name" || exit 1
+	[ "$($TMUX display-message -p -t layouts:one '#{window_layout}')" = "$one" ] ||
+		fail "$name changed a one-pane layout"
+done
+
+# Force the minimum-size paths without requiring a terminal client.
+$TMUX resize-window -t layouts:many -x10 -y6 || exit 1
+for name in even-horizontal even-vertical main-horizontal \
+    main-horizontal-mirrored main-vertical main-vertical-mirrored tiled; do
+	$TMUX select-layout -t layouts:many "$name" || exit 1
+done
+
+$TMUX has-session -t layouts || fail "server died during layout tests"
+exit 0

regress/list-commands.sh

@@ -0,0 +1,46 @@
+#!/bin/sh
+
+# Exercise list-commands for the full table, a single command, aliases, custom
+# and empty formats, and lookup errors.
+
+PATH=/bin:/usr/bin
+TERM=screen
+export PATH TERM
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+DIR=$(mktemp -d) || exit 1
+TMUX_TMPDIR=$DIR
+export TMUX_TMPDIR
+TMUX="$TEST_TMUX -Ltest$$ -f/dev/null"
+
+cleanup()
+{
+	$TMUX kill-server 2>/dev/null
+	rm -rf "$DIR"
+}
+trap cleanup 0 1 15
+
+# Keep a server alive across commands. Otherwise a STARTSERVER-only command
+# may exit between invocations and leave a short socket-cleanup race.
+$TMUX new-session -d -s list-commands 'exec sleep 100' || exit 1
+
+all=$($TMUX list-commands) || exit 1
+printf '%s\n' "$all" | grep -q '^attach-session (attach)' || exit 1
+printf '%s\n' "$all" | grep -q '^list-commands (lscm)' || exit 1
+
+one=$($TMUX list-commands -F \
+    '#{command_list_name}|#{command_list_alias}|#{command_list_usage}' \
+    list-commands) || exit 1
+case "$one" in
+'list-commands|lscm|'*) ;;
+*) exit 1 ;;
+esac
+
+# Aliases resolve to their command, while an empty expansion prints no line.
+[ "$($TMUX list-commands -F '#{command_list_name}' lscm)" = list-commands ] ||
+	exit 1
+[ -z "$($TMUX list-commands -F '' list-commands)" ] || exit 1
+
+$TMUX list-commands tmux-no-command-$$ >/dev/null 2>&1 && exit 1
+$TMUX list-commands list >/dev/null 2>&1 && exit 1
+exit 0

regress/modal-pane.sh

@@ -337,9 +337,9 @@ $TMUX set -g @modal-prefix no
 $TMUX set -g @modal-root no
 $TMUX bind -n z set -g @modal-root yes
 
-modal=$($TMUX new-pane -OKPF '#{pane_id}' -t "$p0" \
+modal=$($TMUX new-pane -ODKPF '#{pane_id}' -t "$p0" \
     -x 20 -y 5 -X 20 -Y 10 'cat') ||
-	fail "new-pane -OK failed"
+	fail "new-pane -ODK failed"
 sleep 1
 $TMUX2 send-keys -t "$OUTER" C-b x z Enter
 sleep 1
@@ -356,9 +356,50 @@ new_left=$(fmt "$modal" '#{pane_left}')
 new_top=$(fmt "$modal" '#{pane_top}')
 [ "$new_left" -gt "$left" ] || [ "$new_top" -gt "$top" ] ||
 	fail "key-capturing modal pane did not move"
+$TMUX2 send-keys -t "$OUTER" Escape
+sleep 1
+must_equal "$(fmt modal:0 '#{window_modal_pane}')" ''
+
+modal=$($TMUX new-pane -ODKPF '#{pane_id}' -t "$p0" \
+    -x 20 -y 5 -X 20 -Y 10 'trap "" INT; exec cat') ||
+	fail "new-pane -ODK failed"
+sleep 1
+$TMUX2 send-keys -t "$OUTER" C-c
+sleep 1
+must_equal "$(fmt modal:0 '#{window_modal_pane}')" ''
+
+# A dead modal does not close on Escape or C-c without -D.
+modal=$($TMUX new-pane -OPF '#{pane_id}' -t "$p0" \
+    -x 20 -y 5 -X 20 -Y 10 'sleep 1') ||
+	fail "new-pane -O failed"
+check_ok set-option -p -t "$modal" remain-on-exit on
+sleep 2
+must_equal "$(fmt "$modal" '#{pane_dead}:#{pane_modal_flag}')" 1:1
+$TMUX2 send-keys -t "$OUTER" Escape
+sleep 1
+must_equal "$(fmt modal:0 '#{window_modal_pane}')" "$modal"
 check_ok kill-pane -t "$modal"
 sleep 1
 
+# failed-key closes successful panes and retains failed panes until a key.
+modal=$($TMUX new-pane -OPF '#{pane_id}' -t "$p0" \
+    -x 20 -y 5 -X 20 -Y 10 'sleep 1') ||
+	fail "new-pane -O failed"
+check_ok set-option -p -t "$modal" remain-on-exit failed-key
+sleep 2
+must_equal "$(fmt modal:0 '#{window_modal_pane}')" ''
+
+modal=$($TMUX new-pane -OPF '#{pane_id}' -t "$p0" \
+    -x 20 -y 5 -X 20 -Y 10 'sleep 1; exit 1') ||
+	fail "new-pane -O failed"
+check_ok set-option -p -t "$modal" remain-on-exit failed-key
+sleep 2
+must_equal "$(fmt "$modal" '#{pane_dead}:#{pane_modal_flag}')" 1:1
+must_equal "$($TMUX show-options -pv -t "$modal" remain-on-exit)" failed-key
+$TMUX2 send-keys -t "$OUTER" a
+sleep 1
+must_equal "$(fmt modal:0 '#{window_modal_pane}')" ''
+
 # A nonmodal floating pane may remain above zoom, and switching between it and
 # the zoomed tiled pane must not unzoom the window.
 check_ok new-window -d -t modal: -n float-over-zoom 'cat'

regress/pane-ops.sh

@@ -104,6 +104,25 @@ assert_alive()
 	fi
 }
 
+# Compare layout geometry and pane ordering, ignoring the active pane and
+# last-pane history in the JSON layout. Selection is checked separately.
+pane_layout()
+{
+	$TMUX display-message -p -t "$1" '#{window_layout}' |
+		sed 's/,"a":true//g; s/,"l":[0-9][0-9]*//g'
+}
+
+check_layout()
+{
+	out=$(pane_layout "$1")
+	if [ "$out" != "$2" ]; then
+		echo "Layout for '$1' wrong."
+		echo "Expected: '$2'"
+		echo "But got:  '$out'"
+		exit 1
+	fi
+}
+
 # ---------------------------------------------------------------------------
 # split-window geometry.
 
@@ -309,12 +328,12 @@ check_ok kill-pane -t "$p6"
 
 # Zoom and unzoom preserve the exact tiled layout. Selecting another pane
 # without -Z unzooms, while -Z transfers zoom to the selected pane.
-layout=$($TMUX display-message -p -t P:0 '#{window_layout}')
+layout=$(pane_layout P:0)
 check_ok select-pane -t "$p0"
 check_ok resize-pane -Z -t "$p0"
 check_ok select-pane -t "$p2"
 check_fmt "$p2" '#{window_zoomed_flag}:#{pane_active}' '0:1'
-check_fmt P:0 '#{window_layout}' "$layout"
+check_layout P:0 "$layout"
 
 check_ok select-pane -t "$p0"
 check_ok resize-pane -Z -t "$p0"
@@ -322,7 +341,7 @@ check_ok select-pane -Z -t "$p2"
 check_fmt "$p2" '#{window_zoomed_flag}:#{pane_zoomed_flag}:#{pane_active}' \
 	'1:1:1'
 check_ok resize-pane -Z -t "$p2"
-check_fmt P:0 '#{window_layout}' "$layout"
+check_layout P:0 "$layout"
 
 # Directional selection temporarily restores the full layout to find its
 # neighbour, then follows the same unzoom or -Z transfer rules.
@@ -340,7 +359,7 @@ check_ok select-pane -D -Z -t "$p0"
 check_fmt "$p2" '#{window_zoomed_flag}:#{pane_zoomed_flag}:#{pane_active}' \
 	'1:1:1'
 check_ok resize-pane -Z -t "$p2"
-check_fmt P:0 '#{window_layout}' "$layout"
+check_layout P:0 "$layout"
 
 # The last-pane path has separate zoom handling, both with and without -Z.
 check_ok select-pane -t "$p0"
@@ -357,7 +376,7 @@ check_ok select-pane -l -Z -t P:0
 check_fmt "$p0" '#{window_zoomed_flag}:#{pane_zoomed_flag}:#{pane_active}' \
 	'1:1:1'
 check_ok resize-pane -Z -t "$p0"
-check_fmt P:0 '#{window_layout}' "$layout"
+check_layout P:0 "$layout"
 
 # Killing either a hidden ordinary pane or the zoom target unzooms.
 check_ok new-window -d -t P:12 -n zoom-kill 'cat'

regress/prompt-keys.sh

@@ -217,7 +217,36 @@ $OUT send-keys M-r || exit 1
 settle
 status_line | grep -q '>' || fail "status-line prompt not drawn on the status line"
 
-# --- 11. emacs cursor-marker edit, accept recovers the exact buffer. ---
+# --- 11. Invalid UTF-8 input must not desynchronize the prompt buffer. ---
+$OUT send-keys -H e6 85 5f || exit 1	# invalid UTF-8, then "_"
+settle
+$IN display-message -p '#{version}' >/dev/null 2>&1 || \
+	fail "invalid UTF-8 append killed inner tmux"
+status_line | grep -qF "> _" || \
+	fail "invalid UTF-8 append did not keep prompt usable (got '$(status_line)')"
+$OUT send-keys Enter || exit 1
+settle
+[ "$($IN show -gv @r)" = "_" ] || \
+	fail "invalid UTF-8 append recovered '$($IN show -gv @r)', wanted '_'"
+
+$IN set -g @r "SENTINEL" || exit 1
+$OUT send-keys M-r || exit 1
+settle
+$OUT send-keys -H e6 85 04 || exit 1	# invalid UTF-8, then C-d
+settle
+$IN display-message -p '#{version}' >/dev/null 2>&1 || \
+	fail "invalid UTF-8 delete killed inner tmux"
+status_line | grep -q '>' || \
+	fail "invalid UTF-8 delete closed the prompt (got '$(status_line)')"
+$OUT send-keys Escape || exit 1
+settle
+[ "$($IN show -gv @r)" = "SENTINEL" ] || \
+	fail "invalid UTF-8 delete accepted the prompt"
+
+# --- 12. emacs cursor-marker edit, accept recovers the exact buffer. ---
+$IN set -g @r "" || exit 1
+$OUT send-keys M-r || exit 1
+settle
 $OUT send-keys -l "abc" || exit 1
 $OUT send-keys Home || exit 1
 $OUT send-keys -l "X" || exit 1
@@ -229,7 +258,7 @@ settle
 [ "$($IN show -gv @r)" = "Xabc" ] || \
 	fail "status-line accept recovered '$($IN show -gv @r)', wanted 'Xabc'"
 
-# --- 12. Unicode on the status line: insert, move, delete wide char. ---
+# --- 13. Unicode on the status line: insert, move, delete wide char. ---
 $IN set -g @r "" || exit 1
 $OUT send-keys M-r || exit 1
 settle
@@ -249,7 +278,7 @@ settle
 [ "$($IN show -gv @r)" = "Za" ] || \
 	fail "status-line wide edit recovered '$($IN show -gv @r)', wanted 'Za'"
 
-# --- 13. Overflow: more text than fits stays within the line and is kept. ---
+# --- 14. Overflow: more text than fits stays within the line and is kept. ---
 big="0123456789012345678901234567890123456789012345678901234567890123456789ABCDEFGHIJ"
 $IN set -g @r "" || exit 1
 $OUT send-keys M-r || exit 1
@@ -264,7 +293,7 @@ settle
 # The whole buffer was kept despite only part being visible.
 [ "$($IN show -gv @r)" = "$big" ] || fail "overflowing prompt lost buffer content"
 
-# --- 14. Escape closes the status-line prompt cleanly. ---
+# --- 15. Escape closes the status-line prompt cleanly. ---
 $IN set -g @r "SENTINEL" || exit 1
 $OUT send-keys M-r || exit 1
 settle

regress/prompt-words-history.sh

@@ -0,0 +1,165 @@
+#!/bin/sh
+
+# Cover prompt word movement in emacs and vi modes, ambiguous inline command
+# completion, and the show/clear-prompt-history command surface.
+
+PATH=/bin:/usr/bin
+TERM=screen
+LC_ALL=C.UTF-8
+export PATH TERM LC_ALL
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+DIR=$(mktemp -d) || exit 1
+TMUX_TMPDIR=$DIR
+export TMUX_TMPDIR
+INNER="$TEST_TMUX -LtestI$$ -f/dev/null"
+OUTER="$TEST_TMUX -LtestO$$ -f/dev/null"
+
+fail()
+{
+	echo "$*" >&2
+	exit 1
+}
+
+cleanup()
+{
+	$OUTER kill-server 2>/dev/null
+	$INNER kill-server 2>/dev/null
+	rm -rf "$DIR"
+}
+trap cleanup 0 1 15
+
+capture()
+{
+	$OUTER capture-pane -p -t outer:0.0 2>/dev/null
+}
+
+wait_result()
+{
+	want=$1
+	i=0
+	while [ "$i" -lt 50 ]; do
+		got=$($INNER show-option -gqv @result 2>/dev/null)
+		[ "$got" = "$want" ] && return 0
+		sleep 0.1
+		i=$((i + 1))
+	done
+	fail "prompt result is '$got', expected '$want'"
+}
+
+bind_prompt()
+{
+	initial=$1
+	$INNER bind-key -n M-r command-prompt -I "$initial" -p '(word)' \
+		"set-option -g @result '%%'" || exit 1
+}
+
+run_prompt()
+{
+	want=$1
+	shift
+	$INNER set-option -g @result sentinel || exit 1
+	$OUTER send-keys M-r || exit 1
+	sleep 0.2
+	$OUTER send-keys "$@" || exit 1
+	$OUTER send-keys Enter || exit 1
+	wait_result "$want"
+}
+
+run_vi_prompt()
+{
+	want=$1
+	shift
+	$INNER set-option -g @result sentinel || exit 1
+	$OUTER send-keys M-r || exit 1
+	sleep 0.2
+	# Send Escape separately so the terminal's escape-time handling does not
+	# combine it with the first vi command as a Meta key.
+	$OUTER send-keys Escape || exit 1
+	# The inner client must see Escape as a complete key, not the prefix of a
+	# Meta sequence (the default escape-time is 500 milliseconds).
+	sleep 0.7
+	$OUTER send-keys "$@" || exit 1
+	$OUTER send-keys Enter || exit 1
+	wait_result "$want"
+}
+
+$INNER new-session -d -s prompt -x80 -y24 'exec sleep 100' || exit 1
+$INNER set-option -g status on || exit 1
+$INNER set-option -g status-position bottom || exit 1
+$INNER set-option -g window-size manual || exit 1
+$OUTER new-session -d -s outer -x80 -y24 "$INNER attach -t prompt" || exit 1
+$OUTER set-option -g status off || exit 1
+$OUTER set-option -g window-size manual || exit 1
+sleep 1
+
+# Emacs Meta-f stops after the first word; Meta-b returns to the start of the
+# previous word. Inserting a marker makes the cursor position observable.
+$INNER set-option -g status-keys emacs || exit 1
+bind_prompt 'one two'
+run_prompt 'oneX two' Home M-f X
+bind_prompt 'one two'
+run_prompt 'one Xtwo' M-b X
+
+# Vi translation and the distinct separator-aware and WORD motions.
+$INNER set-option -g status-keys vi || exit 1
+bind_prompt 'one-two three'
+run_vi_prompt 'one-two Xthree' b i X
+bind_prompt 'one-two three'
+run_vi_prompt 'one-two Xthree' B i X
+bind_prompt 'one-two three'
+run_vi_prompt 'oneX-two three' 0 w i X
+bind_prompt 'one-two three'
+run_vi_prompt 'one-two Xthree' 0 W i X
+bind_prompt 'one-two three'
+run_vi_prompt 'oneX-two three' 0 e a X
+bind_prompt 'one-two three'
+run_vi_prompt 'one-twoX three' 0 E a X
+
+# "show-" has several command matches and no longer common prefix. Tab keeps
+# the input and draws the sorted candidates inline.
+$INNER set-option -g status-keys emacs || exit 1
+bind_prompt ''
+$OUTER send-keys M-r || exit 1
+sleep 0.2
+$OUTER send-keys -l 'show-' || exit 1
+$OUTER send-keys Tab || exit 1
+sleep 0.2
+captured=$(capture)
+printf '%s\n' "$captured" | grep -Fq 'show-buffer' ||
+	fail "ambiguous completion list was not drawn"
+printf '%s\n' "$captured" | grep -Fq 'show-environment' ||
+	fail "ambiguous completion list was incomplete"
+$OUTER send-keys Escape || exit 1
+
+# Add entries to both history rings through real prompts.
+bind_prompt 'history-command'
+run_prompt 'history-command'
+$INNER bind-key -n M-s command-prompt -T search -I history-search \
+	-p '(search-history)' "set-option -g @result '%%'" || exit 1
+$OUTER send-keys M-s || exit 1
+$OUTER send-keys Enter || exit 1
+wait_result history-search
+
+command_history=$($INNER show-prompt-history -T command) || exit 1
+printf '%s\n' "$command_history" | grep -Fq 'history-command' ||
+	fail "command history entry missing"
+search_history=$($INNER show-prompt-history -T search) || exit 1
+printf '%s\n' "$search_history" | grep -Fq 'history-search' ||
+	fail "search history entry missing"
+all_history=$($INNER show-prompt-history) || exit 1
+printf '%s\n' "$all_history" | grep -Fq 'History for command:' || exit 1
+printf '%s\n' "$all_history" | grep -Fq 'History for search:' || exit 1
+
+$INNER show-prompt-history -T invalid >/dev/null 2>&1 &&
+	fail "invalid show history type succeeded"
+$INNER clear-prompt-history -T invalid >/dev/null 2>&1 &&
+	fail "invalid clear history type succeeded"
+$INNER clear-prompt-history -T command || exit 1
+$INNER show-prompt-history -T command | grep -Fq history-command &&
+	fail "type-specific history clear failed"
+$INNER clear-prompt-history || exit 1
+$INNER show-prompt-history | grep -Fq history-search &&
+	fail "all-history clear failed"
+
+exit 0

regress/respawn-pane-control-lag.sh

@@ -15,7 +15,7 @@ PATH=/bin:/usr/bin
 TERM=screen
 
 [ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
-TMUX="$TEST_TMUX -Ltest"
+TMUX="$TEST_TMUX -Ltest$$"
 $TMUX kill-server 2>/dev/null
 
 DIR=$(mktemp -d)

regress/run-shell-cwd.sh

@@ -0,0 +1,55 @@
+#!/bin/sh
+
+# run-shell -c should expand formats using the target pane.
+
+PATH=/bin:/usr/bin
+TERM=screen
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+TMUX="$TEST_TMUX -LtestA$$ -f/dev/null"
+
+TMP=$(mktemp -d)
+trap '$TMUX kill-server 2>/dev/null; rm -rf "$TMP"' 0 1 15
+TMP=$(cd "$TMP" && pwd -P)
+mkdir "$TMP/first" "$TMP/second dir" || exit 1
+
+check_directory()
+{
+	actual=$(cat "$TMP/out")
+	if [ "$actual" != "$1" ]; then
+		echo "Expected directory '$1', got '$actual'"
+		exit 1
+	fi
+}
+
+# The start path is available immediately, before the child is scheduled.
+# Use it to test the format context in the same command queue as creation.
+$TMUX new-session -d -s test -c "$TMP/first" 'sleep 60' \; \
+	 run-shell -c '#{pane_start_path}' "pwd >'$TMP/out'" || exit 1
+check_directory "$TMP/first"
+
+# An explicit target must supply the format context, including with a delay.
+pane=$($TMUX new-window -d -P -F '#{pane_id}' -t test \
+	-c "$TMP/second dir" 'sleep 60') || exit 1
+# The current path depends on the operating system finding the child process.
+i=0
+while [ "$($TMUX display-message -p -t "$pane" '#{pane_current_path}')" != \
+    "$TMP/second dir" ]; do
+	if [ "$i" -ge 100 ]; then
+		echo "Timed out waiting for pane current directory"
+		exit 1
+	fi
+	sleep 0.05
+	i=$((i + 1))
+done
+$TMUX run-shell -t "$pane" -d 0.1 -c '#{pane_current_path}' \
+	"pwd >'$TMP/out'" || exit 1
+check_directory "$TMP/second dir"
+
+# Literal directories and the default client directory still work.
+$TMUX run-shell -c "$TMP/second dir" "pwd >'$TMP/out'" || exit 1
+check_directory "$TMP/second dir"
+(cd "$TMP/first" && $TMUX run-shell "pwd >'$TMP/out'") || exit 1
+check_directory "$TMP/first"
+
+exit 0

regress/screen-redraw-outside.sh

@@ -93,6 +93,15 @@ $TMUX2 splitw -v "$C" || exit 1
 $TMUX2 select-layout tiled || exit 1
 compare outside-both-2x2
 
+# Top pane status supplies internal horizontal borders, but there is no pane
+# below the window to supply its bottom edge.
+new_scene 28 9
+$TMUX2 setw pane-border-status top || exit 1
+$TMUX2 setw pane-border-format "" || exit 1
+compare outside-both-status-top-single
+$TMUX2 splitw -v "$C" || exit 1
+compare outside-both-status-top-split
+
 # Window BIGGER than the client: only part of the window is viewed and the view
 # can be panned (refresh-client). This exercises a non-zero scene offset.
 # A 2x2 grid in a 60x20 window viewed through the 40x14 client.

regress/screen-redraw-results/outside-both-status-top-single.result

@@ -0,0 +1,14 @@
+────────────────────────────┐···········
+OUT01 abcdefghij            │···········
+OUT02 abcdefghij            │···········
+OUT03 abcdefghij            │···········
+OUT04 abcdefghij            │···········
+OUT05 abcdefghij            │···········
+OUT06 abcdefghij            │···········
+OUT07 abcdefghij            │···········
+                            │···········
+────────────────────────────┘···········
+········································
+········································
+········································
+········································

regress/screen-redraw-results/outside-both-status-top-split.result

@@ -0,0 +1,14 @@
+────────────────────────────┐···········
+OUT06 abcdefghij            │···········
+OUT07 abcdefghij            │···········
+                            │···········
+────────────────────────────┤···········
+PAN05 abcdefghij            │···········
+PAN06 abcdefghij            │···········
+PAN07 abcdefghij            │···········
+                            │···········
+────────────────────────────┘···········
+········································
+········································
+········································
+········································

regress/screen-redraw-scrollbars-auto-hide.sh

@@ -0,0 +1,96 @@
+#!/bin/sh
+
+# Auto-hide scrollbars appear on activity or pointer hover, then disappear
+# after pane-scrollbars-timeout. Compare captures of the same copy-mode view so
+# only the overlay scrollbar changes.
+
+PATH=/bin:/usr/bin
+TERM=screen
+LC_ALL=C.UTF-8
+export PATH TERM LC_ALL
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+OUTER="$TEST_TMUX -LtestA$$ -f/dev/null"
+INNER="$TEST_TMUX -LtestB$$ -f/dev/null"
+DIR=$(mktemp -d) || exit 1
+HIDDEN=$DIR/hidden
+VISIBLE=$DIR/visible
+AFTER=$DIR/after
+
+fail()
+{
+	echo "$*" >&2
+	exit 1
+}
+
+cleanup()
+{
+	$OUTER kill-server 2>/dev/null
+	$INNER kill-server 2>/dev/null
+	rm -rf "$DIR"
+}
+trap cleanup 0 1 15
+
+capture()
+{
+	$OUTER capture-pane -pe -t outer:0.0 >"$1" || exit 1
+}
+
+wait_for_client()
+{
+	i=0
+	while [ "$i" -lt 50 ]; do
+		$INNER list-clients 2>/dev/null | grep -q . && return 0
+		sleep 0.1
+		i=$((i + 1))
+	done
+	fail "inner client did not attach"
+}
+
+$INNER new-session -d -s inner -x40 -y12 \
+	"sh -c 'seq 50; exec sleep 100'" || exit 1
+$INNER set-option -g status off || exit 1
+$INNER set-option -g window-size manual || exit 1
+$INNER set-option -g mouse on || exit 1
+$INNER set-window-option pane-scrollbars auto-hide || exit 1
+$INNER set-window-option pane-scrollbars-timeout 3000 || exit 1
+$INNER set-window-option pane-scrollbars-style \
+	'bg=colour196,fg=colour231,width=1,pad=0' || exit 1
+
+$OUTER new-session -d -s outer -x40 -y12 "$INNER attach -t inner" || exit 1
+$OUTER set-option -g status off || exit 1
+$OUTER set-option -g window-size manual || exit 1
+wait_for_client
+
+# Enter copy mode and choose a stable view. The initial show timer is allowed
+# to expire before taking the hidden reference capture.
+$INNER copy-mode -H || exit 1
+$INNER send-keys -X history-top || exit 1
+sleep 3.5
+capture "$HIDDEN"
+
+# A copy-mode page movement shows the overlay and starts its timer. Capture
+# that view immediately, then again after the timeout without moving it.
+$INNER send-keys -X page-down || exit 1
+sleep 0.1
+capture "$VISIBLE"
+sleep 3.5
+capture "$AFTER"
+cmp -s "$VISIBLE" "$AFTER" && fail "scrollbar did not hide after timeout"
+
+# Use the post-movement hidden scene as the reference for pointer hover. SGR
+# mouse column 40 is the right-hand scrollbar; moving to column 5 restarts the
+# timer without changing the copy-mode view.
+cp "$AFTER" "$HIDDEN"
+hover=$(printf '\033[<35;40;5M')
+$OUTER send-keys -l "$hover" || exit 1
+sleep 0.1
+capture "$VISIBLE"
+cmp -s "$HIDDEN" "$VISIBLE" && fail "scrollbar did not appear on hover"
+away=$(printf '\033[<35;5;5M')
+$OUTER send-keys -l "$away" || exit 1
+sleep 3.5
+capture "$AFTER"
+cmp -s "$HIDDEN" "$AFTER" || fail "scrollbar did not hide after hover"
+
+exit 0

regress/screen-redraw-tiled.sh

@@ -95,7 +95,8 @@ layout_tee_down() {		# top/bottom, bottom split: a top tee
 $TMUX kill-server 2>/dev/null
 $TMUX2 kill-server 2>/dev/null
 
-$TMUX2 new -d -x40 -y14 "sh -c 'exec sleep 100'" || exit 1
+# Keep the anchor window alive until cleanup, even on slow test runs.
+$TMUX2 new -d -x40 -y14 'exec cat' || exit 1
 $TMUX2 set -g status off || exit 1
 $TMUX2 set -g window-size manual || exit 1
 $TMUX2 set -g pane-border-format " #{pane_index} " || exit 1

regress/server-access.sh

@@ -0,0 +1,112 @@
+#!/bin/sh
+
+# Exercise the unprivileged server-access surface: user and group ACL entries,
+# read-only/writable transitions, listing, removal, implied addition, and
+# command errors. Actual connections from another UID require privileges and
+# deliberately do not form part of this test.
+
+PATH=/bin:/usr/bin
+TERM=screen
+export PATH TERM
+
+[ -z "$TEST_TMUX" ] && TEST_TMUX=$(readlink -f ../tmux)
+TMUX="$TEST_TMUX -LtestA$$ -f/dev/null"
+OUT=$(mktemp) || exit 1
+
+fail()
+{
+	echo "$*" >&2
+	exit 1
+}
+
+cleanup()
+{
+	$TMUX kill-server 2>/dev/null
+	rm -f "$OUT"
+}
+trap cleanup 0 1 15
+
+expect_fail()
+{
+	message=$1
+	shift
+	if $TMUX "$@" >"$OUT" 2>&1; then
+		fail "$message: command unexpectedly succeeded"
+	fi
+}
+
+assert_entry()
+{
+	entry=$1
+	$TMUX server-access -l >"$OUT" || exit 1
+	grep -Fxq "$entry" "$OUT" ||
+		fail "missing ACL entry '$entry'"
+}
+
+assert_no_entry()
+{
+	entry=$1
+	$TMUX server-access -l >"$OUT" || exit 1
+	if grep -Fxq "$entry" "$OUT"; then
+		fail "unexpected ACL entry '$entry'"
+	fi
+}
+
+owner_uid=$(id -u)
+owner_name=$(id -un)
+
+# nobody is the non-owner test identity. Derive its primary group rather than
+# assuming whether the system calls it nobody, nogroup, or something else.
+acl_user=nobody
+acl_group=$(id -gn "$acl_user" 2>/dev/null) ||
+	fail "the nobody account is unavailable"
+[ "$owner_name" != "$acl_user" ] || fail "test cannot run as nobody"
+
+$TMUX new-session -d -s access 'exec sleep 100' || exit 1
+
+# The owner is installed as writable at server startup (root is intentionally
+# omitted from display output).
+if [ "$owner_uid" != 0 ]; then
+	assert_entry "$owner_name (U,W)"
+fi
+
+# User ACL lifecycle, including duplicate and missing-entry errors.
+$TMUX server-access -a "$acl_user" || exit 1
+assert_entry "$acl_user (U,W)"
+expect_fail "duplicate user addition" server-access -a "$acl_user"
+$TMUX server-access -r "$acl_user" || exit 1
+assert_entry "$acl_user (U,R)"
+$TMUX server-access -w "$acl_user" || exit 1
+assert_entry "$acl_user (U,W)"
+$TMUX server-access -d "$acl_user" || exit 1
+assert_no_entry "$acl_user (U,W)"
+expect_fail "removing absent user" server-access -d "$acl_user"
+
+# -r and -w imply -a when an entry is absent.
+$TMUX server-access -r "$acl_user" || exit 1
+assert_entry "$acl_user (U,R)"
+$TMUX server-access -d "$acl_user" || exit 1
+
+# The same lifecycle for a group exercises the separate ACL key space.
+$TMUX server-access -g -a -r "$acl_group" || exit 1
+assert_entry "$acl_group (G,R)"
+$TMUX server-access -g -w "$acl_group" || exit 1
+assert_entry "$acl_group (G,W)"
+expect_fail "duplicate group addition" server-access -g -a "$acl_group"
+$TMUX server-access -g -d "$acl_group" || exit 1
+assert_no_entry "$acl_group (G,W)"
+expect_fail "removing absent group" server-access -g -d "$acl_group"
+
+# Parser and lookup errors, plus the immutable owner/root entries.
+expect_fail "missing ACL subject" server-access -a
+expect_fail "unknown user" server-access -a "tmux-no-user-$$"
+expect_fail "unknown group" server-access -g -a "tmux-no-group-$$"
+expect_fail "conflicting add/delete" server-access -a -d "$acl_user"
+expect_fail "conflicting read/write" server-access -r -w "$acl_user"
+expect_fail "changing server owner" server-access -r "$owner_name"
+if [ "$owner_name" != root ]; then
+	expect_fail "changing root access" server-access -a root
+fi
+
+$TMUX has-session -t access || fail "server exited during ACL updates"
+exit 0