Bump version.

issue 5572 from Afonso Januário. Also tweak some language while here.

configure.ac

@@ -1,6 +1,6 @@
 # configure.ac
 
-AC_INIT([tmux], next-3.9)
+AC_INIT([tmux], 3.8-rc2)
 AC_PREREQ([2.60])
 
 AC_CONFIG_AUX_DIR(etc)

layout.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: layout.c,v 1.100 2026/09/11 08:16:14 nicm Exp $ */
+/* $OpenBSD: layout.c,v 1.99 2026/09/09 07:03:39 nicm Exp $ */
 
 /*
  * Copyright (c) 2009 Nicholas Marriott <nicholas.marriott@gmail.com>
@@ -768,49 +768,6 @@ layout_free(struct window *w, int only_nodes)
 	layout_free_cell(w->layout_root, only_nodes);
 }
 
-/* Move and resize floating panes so they stay inside the window. */
-static void
-layout_clamp_floating_panes(struct window *w, u_int sx, u_int sy)
-{
-	struct window_pane	*wp;
-	struct layout_cell	*lc;
-	u_int			 pad, avail, csx, csy;
-
-	TAILQ_FOREACH(wp, &w->z_index, zentry) {
-		lc = wp->layout_cell;
-		if (lc == NULL || (~lc->flags & LAYOUT_CELL_FLOATING))
-			continue;
-		if (window_pane_get_pane_lines(wp) == PANE_LINES_NONE)
-			pad = 0;
-		else
-			pad = 1;
-
-		csx = lc->g.sx;
-		avail = (sx > 2 * pad) ? sx - 2 * pad : 0;
-		if (csx > avail)
-			csx = (avail > PANE_MINIMUM) ? avail : PANE_MINIMUM;
-		csy = lc->g.sy;
-		avail = (sy > 2 * pad) ? sy - 2 * pad : 0;
-		if (csy > avail)
-			csy = (avail > PANE_MINIMUM) ? avail : PANE_MINIMUM;
-		if (csx != lc->g.sx || csy != lc->g.sy)
-			layout_set_size(lc, csx, csy, lc->g.xoff, lc->g.yoff);
-
-		if (lc->g.xoff + lc->g.sx + pad > sx) {
-			if (lc->g.sx + 2 * pad >= sx)
-				lc->g.xoff = pad;
-			else
-				lc->g.xoff = sx - lc->g.sx - pad;
-		}
-		if (lc->g.yoff + lc->g.sy + pad > sy) {
-			if (lc->g.sy + 2 * pad >= sy)
-				lc->g.yoff = pad;
-			else
-				lc->g.yoff = sy - lc->g.sy - pad;
-		}
-	}
-}
-
 /* Resize the entire layout after window resize. */
 void
 layout_resize(struct window *w, u_int sx, u_int sy)
@@ -831,11 +788,8 @@ layout_resize(struct window *w, u_int sx, u_int sy)
 	 * out proportionately - this should leave the layout fitting the new
 	 * window size.
 	 */
-	if (lc->type == LAYOUT_WINDOWPANE && (lc->flags & LAYOUT_CELL_FLOATING)) {
-		layout_clamp_floating_panes(w, sx, sy);
-		layout_fix_panes(w, NULL);
+	if (lc->type == LAYOUT_WINDOWPANE && (lc->flags & LAYOUT_CELL_FLOATING))
 		return;
-	}
 	xchange = sx - lc->g.sx;
 	xlimit = layout_resize_check(w, lc, LAYOUT_LEFTRIGHT);
 	if (xchange < 0 && xchange < -xlimit)
@@ -865,7 +819,6 @@ layout_resize(struct window *w, u_int sx, u_int sy)
 
 	/* Fix cell offsets. */
 	layout_fix_offsets(w);
-	layout_clamp_floating_panes(w, sx, sy);
 	layout_fix_panes(w, NULL);
 }
 

options-table.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: options-table.c,v 1.246 2026/09/11 10:17:16 nicm Exp $ */
+/* $OpenBSD: options-table.c,v 1.245 2026/09/10 11:02:18 nicm Exp $ */
 
 /*
  * Copyright (c) 2011 Nicholas Marriott <nicholas.marriott@gmail.com>
@@ -76,8 +76,7 @@ static const char *options_table_pane_border_indicators_list[] = {
 	"off", "colour", "arrows", "both", NULL
 };
 static const char *options_table_pane_border_lines_list[] = {
-	"single", "double", "heavy", "simple", "number", "spaces", "none",
-	"rounded", NULL
+	"single", "double", "heavy", "simple", "number", "spaces", "none", NULL
 };
 static const char *options_table_popup_border_lines_list[] = {
 	"single", "double", "heavy", "simple", "rounded", "padded", "none", NULL

regress/floating-pane-geometry.sh

@@ -268,149 +268,5 @@ $TMUX kill-pane -t "$floating" || exit 1
 $TMUX kill-pane -t "$right" || exit 1
 $TMUX kill-pane -t "$lower" || exit 1
 
-# --- Floating panes clamped when the window shrinks (issue #5581, PR #5582) ---
-#
-# layout_resize clamps floating panes back inside the window when it shrinks:
-# move them and, only if they cannot fit, shrink them (never below
-# PANE_MINIMUM). A floating cell is the pane's content, so with the default
-# single-line border the clamp counts 1 cell of border per side, exactly as
-# layout_floating_args_parse does on creation; with no border it counts 0.
-# Each case below gets its own window, since resize-window fixes a window at
-# a manual size for the rest of its life.
-
-# Case 1: a lone floating pane -- break-pane -W on a window's only pane --
-# takes the early-return path in layout_resize, added during PR #5582's
-# review round, since there is no tiled tree to walk.
-win=$($TMUX new-window -dPF '#{window_id}') ||
-	fail "new-window for lone float failed"
-
-# -x 20 -y 6 -> pane 18x4; -X 60 -Y 18 -> pane_left 61, pane_top 19: with the
-# border, the footprint is columns 60-79, rows 18-23, flush with the 80x24
-# window's right and bottom edges, so the float fits before it is shrunk.
-$TMUX break-pane -W -s "$win" -x 20 -y 6 -X 60 -Y 18 ||
-	fail "break-pane -W for lone float failed"
-must_equal "$($TMUX display-message -p -t "$win" '#{pane_width}')"  18
-must_equal "$($TMUX display-message -p -t "$win" '#{pane_height}')" 4
-must_equal "$($TMUX display-message -p -t "$win" '#{pane_left}')"   61
-must_equal "$($TMUX display-message -p -t "$win" '#{pane_top}')"    19
-
-# Shrink to 40x16. The float still fits at its own size (18 <= 40-2, 4 <=
-# 16-2) so only its position moves, flush to the new right/bottom edges:
-# xoff = 40 - 18 - 1 = 21; yoff = 16 - 4 - 1 = 11.
-$TMUX resize-window -t "$win" -x 40 -y 16 ||
-	fail "resize-window (lone float) failed"
-must_equal "$($TMUX display-message -p -t "$win" '#{pane_width}')"  18
-must_equal "$($TMUX display-message -p -t "$win" '#{pane_height}')" 4
-must_equal "$($TMUX display-message -p -t "$win" '#{pane_left}')"   21
-must_equal "$($TMUX display-message -p -t "$win" '#{pane_top}')"    11
-
-# Case 5: grow the window back. The clamp must not chase the window back
-# outward -- it only ever pulls a float in, never restores where it was.
-$TMUX resize-window -t "$win" -x 80 -y 24 ||
-	fail "resize-window grow (lone float) failed"
-must_equal "$($TMUX display-message -p -t "$win" '#{pane_width}')"  18
-must_equal "$($TMUX display-message -p -t "$win" '#{pane_height}')" 4
-must_equal "$($TMUX display-message -p -t "$win" '#{pane_left}')"   21
-must_equal "$($TMUX display-message -p -t "$win" '#{pane_top}')"    11
-$TMUX kill-window -t "$win" || exit 1
-
-# Case 2: the same float, but with a tiled sibling surviving alongside it, so
-# the window's root cell stays tiled and layout_resize takes the normal path
-# (the clamp call after layout_fix_offsets) instead of the early return
-# above. Same geometry as case 1, so the same numbers should come out.
-win=$($TMUX new-window -dPF '#{window_id}') ||
-	fail "new-window for tiled sibling failed"
-$TMUX split-window -t "$win" 'sleep 100' ||
-	fail "split-window for tiled sibling failed"
-$TMUX break-pane -W -s "$win" -x 20 -y 6 -X 60 -Y 18 ||
-	fail "break-pane -W for tiled sibling failed"
-must_equal "$($TMUX display-message -p -t "$win" '#{pane_width}')"  18
-must_equal "$($TMUX display-message -p -t "$win" '#{pane_height}')" 4
-must_equal "$($TMUX display-message -p -t "$win" '#{pane_left}')"   61
-must_equal "$($TMUX display-message -p -t "$win" '#{pane_top}')"    19
-
-$TMUX resize-window -t "$win" -x 40 -y 16 ||
-	fail "resize-window (tiled sibling) failed"
-must_equal "$($TMUX display-message -p -t "$win" '#{pane_width}')"  18
-must_equal "$($TMUX display-message -p -t "$win" '#{pane_height}')" 4
-must_equal "$($TMUX display-message -p -t "$win" '#{pane_left}')"   21
-must_equal "$($TMUX display-message -p -t "$win" '#{pane_top}')"    11
-$TMUX kill-window -t "$win" || exit 1
-
-# Case 3: new-pane float, the original repro from issue #5581 and the PR
-# body -- also the normal path, via the tiled base pane new-window creates.
-win=$($TMUX new-window -dPF '#{window_id}') ||
-	fail "new-window for new-pane repro failed"
-$TMUX resize-window -t "$win" -x 120 -y 40 ||
-	fail "resize-window to 120x40 failed"
-
-# -x 30 -y 10 -> pane 28x8; -X 85 -Y 25 -> pane_left 86, pane_top 26.
-floating=$($TMUX new-pane -t "$win" -dPF '#{pane_id}' \
-	-x 30 -y 10 -X 85 -Y 25 'sleep 100') ||
-	fail "new-pane for new-pane repro failed"
-must_equal "$($TMUX display-message -p -t "$floating" '#{pane_width}')"  28
-must_equal "$($TMUX display-message -p -t "$floating" '#{pane_height}')" 8
-must_equal "$($TMUX display-message -p -t "$floating" '#{pane_left}')"   86
-must_equal "$($TMUX display-message -p -t "$floating" '#{pane_top}')"    26
-
-# Shrink to 60x20: xoff = 60 - 28 - 1 = 31; yoff = 20 - 8 - 1 = 11.
-$TMUX resize-window -t "$win" -x 60 -y 20 ||
-	fail "resize-window (new-pane repro) failed"
-must_equal "$($TMUX display-message -p -t "$floating" '#{pane_width}')"  28
-must_equal "$($TMUX display-message -p -t "$floating" '#{pane_height}')" 8
-must_equal "$($TMUX display-message -p -t "$floating" '#{pane_left}')"   31
-must_equal "$($TMUX display-message -p -t "$floating" '#{pane_top}')"    11
-$TMUX kill-window -t "$win" || exit 1
-
-# Case 4: a float that already fits inside the shrunk window is left alone --
-# assert position and size are both unchanged, not just one of them.
-win=$($TMUX new-window -dPF '#{window_id}') ||
-	fail "new-window for untouched float failed"
-
-# -x 20 -y 6 -> pane 18x4; -X 8 -Y 3 -> pane_left 9, pane_top 4 (as at the top
-# of this file). Footprint columns 8-27, rows 3-8: well inside 60x20 too.
-floating=$($TMUX new-pane -t "$win" -dPF '#{pane_id}' \
-	-x 20 -y 6 -X 8 -Y 3 'sleep 100') ||
-	fail "new-pane for untouched float failed"
-must_equal "$($TMUX display-message -p -t "$floating" '#{pane_width}')"  18
-must_equal "$($TMUX display-message -p -t "$floating" '#{pane_height}')" 4
-must_equal "$($TMUX display-message -p -t "$floating" '#{pane_left}')"   9
-must_equal "$($TMUX display-message -p -t "$floating" '#{pane_top}')"    4
-
-$TMUX resize-window -t "$win" -x 60 -y 20 ||
-	fail "resize-window (untouched float) failed"
-must_equal "$($TMUX display-message -p -t "$floating" '#{pane_width}')"  18
-must_equal "$($TMUX display-message -p -t "$floating" '#{pane_height}')" 4
-must_equal "$($TMUX display-message -p -t "$floating" '#{pane_left}')"   9
-must_equal "$($TMUX display-message -p -t "$floating" '#{pane_top}')"    4
-$TMUX kill-window -t "$win" || exit 1
-
-# Case 6: pad = 0, via the pane-border-lines window option set to none. The
-# border arithmetic differs here (no -2/+1 adjustment either on creation or
-# in the clamp).
-win=$($TMUX new-window -dPF '#{window_id}') ||
-	fail "new-window for pad=0 float failed"
-$TMUX set-option -w -t "$win" pane-border-lines none ||
-	fail "set pane-border-lines none failed"
-
-# No border: -x 20 -y 6 -> pane 20x6 directly; -X 60 -Y 18 -> pane_left 60,
-# pane_top 18 directly. Footprint (== content, no border) is columns 60-79,
-# rows 18-23: flush right/bottom of the 80x24 window, same as case 1.
-$TMUX break-pane -W -s "$win" -x 20 -y 6 -X 60 -Y 18 ||
-	fail "break-pane -W for pad=0 float failed"
-must_equal "$($TMUX display-message -p -t "$win" '#{pane_width}')"  20
-must_equal "$($TMUX display-message -p -t "$win" '#{pane_height}')" 6
-must_equal "$($TMUX display-message -p -t "$win" '#{pane_left}')"   60
-must_equal "$($TMUX display-message -p -t "$win" '#{pane_top}')"    18
-
-# Shrink to 40x16 with pad=0: xoff = 40 - 20 - 0 = 20; yoff = 16 - 6 - 0 = 10.
-$TMUX resize-window -t "$win" -x 40 -y 16 ||
-	fail "resize-window (pad=0 float) failed"
-must_equal "$($TMUX display-message -p -t "$win" '#{pane_width}')"  20
-must_equal "$($TMUX display-message -p -t "$win" '#{pane_height}')" 6
-must_equal "$($TMUX display-message -p -t "$win" '#{pane_left}')"   20
-must_equal "$($TMUX display-message -p -t "$win" '#{pane_top}')"    10
-$TMUX kill-window -t "$win" || exit 1
-
 $TMUX kill-server 2>/dev/null
 exit 0

regress/modal-pane.sh

@@ -337,9 +337,9 @@ $TMUX set -g @modal-prefix no
 $TMUX set -g @modal-root no
 $TMUX bind -n z set -g @modal-root yes
 
-modal=$($TMUX new-pane -ODKPF '#{pane_id}' -t "$p0" \
+modal=$($TMUX new-pane -OKPF '#{pane_id}' -t "$p0" \
     -x 20 -y 5 -X 20 -Y 10 'cat') ||
-	fail "new-pane -ODK failed"
+	fail "new-pane -OK failed"
 sleep 1
 $TMUX2 send-keys -t "$OUTER" C-b x z Enter
 sleep 1
@@ -356,50 +356,9 @@ new_left=$(fmt "$modal" '#{pane_left}')
 new_top=$(fmt "$modal" '#{pane_top}')
 [ "$new_left" -gt "$left" ] || [ "$new_top" -gt "$top" ] ||
 	fail "key-capturing modal pane did not move"
-$TMUX2 send-keys -t "$OUTER" Escape
-sleep 1
-must_equal "$(fmt modal:0 '#{window_modal_pane}')" ''
-
-modal=$($TMUX new-pane -ODKPF '#{pane_id}' -t "$p0" \
-    -x 20 -y 5 -X 20 -Y 10 'trap "" INT; exec cat') ||
-	fail "new-pane -ODK failed"
-sleep 1
-$TMUX2 send-keys -t "$OUTER" C-c
-sleep 1
-must_equal "$(fmt modal:0 '#{window_modal_pane}')" ''
-
-# A dead modal does not close on Escape or C-c without -D.
-modal=$($TMUX new-pane -OPF '#{pane_id}' -t "$p0" \
-    -x 20 -y 5 -X 20 -Y 10 'sleep 1') ||
-	fail "new-pane -O failed"
-check_ok set-option -p -t "$modal" remain-on-exit on
-sleep 2
-must_equal "$(fmt "$modal" '#{pane_dead}:#{pane_modal_flag}')" 1:1
-$TMUX2 send-keys -t "$OUTER" Escape
-sleep 1
-must_equal "$(fmt modal:0 '#{window_modal_pane}')" "$modal"
 check_ok kill-pane -t "$modal"
 sleep 1
 
-# failed-key closes successful panes and retains failed panes until a key.
-modal=$($TMUX new-pane -OPF '#{pane_id}' -t "$p0" \
-    -x 20 -y 5 -X 20 -Y 10 'sleep 1') ||
-	fail "new-pane -O failed"
-check_ok set-option -p -t "$modal" remain-on-exit failed-key
-sleep 2
-must_equal "$(fmt modal:0 '#{window_modal_pane}')" ''
-
-modal=$($TMUX new-pane -OPF '#{pane_id}' -t "$p0" \
-    -x 20 -y 5 -X 20 -Y 10 'sleep 1; exit 1') ||
-	fail "new-pane -O failed"
-check_ok set-option -p -t "$modal" remain-on-exit failed-key
-sleep 2
-must_equal "$(fmt "$modal" '#{pane_dead}:#{pane_modal_flag}')" 1:1
-must_equal "$($TMUX show-options -pv -t "$modal" remain-on-exit)" failed-key
-$TMUX2 send-keys -t "$OUTER" a
-sleep 1
-must_equal "$(fmt modal:0 '#{window_modal_pane}')" ''
-
 # A nonmodal floating pane may remain above zoom, and switching between it and
 # the zoomed tiled pane must not unzoom the window.
 check_ok new-window -d -t modal: -n float-over-zoom 'cat'

regress/options-values.sh

@@ -86,11 +86,6 @@ check_value "-gv status-keys" "vi"
 check_fail "unknown value: bogus" set -g status-keys bogus
 check_value "-gv status-keys" "vi"
 
-# pane-border-lines accepts rounded as a pane border style.
-check_ok set -gw pane-border-lines rounded
-check_value "-gwv pane-border-lines" "rounded"
-check_ok set -gw pane-border-lines single
-
 # --- flag options ---------------------------------------------------------
 #
 # focus-events is an on/off flag.  Setting with no value toggles it; explicit

regress/screen-redraw-floating.sh

@@ -107,12 +107,6 @@ $TMUX2 new-pane -x28 -y8 -X4 -Y1 -B double \
 	"sh -c 'printf FLOAT; exec sleep 100'" || exit 1
 compare floating-border-double
 
-# Larger floating pane with rounded border lines.
-new_scene 40 12
-$TMUX2 new-pane -x28 -y8 -X4 -Y1 -B rounded \
-	"sh -c 'printf FLOAT; exec sleep 100'" || exit 1
-compare floating-border-rounded
-
 # Floating pane with no border lines: redraw_mark_pane_borders returns early so
 # the float has no border at all, only its (clipped) content over the base pane.
 new_scene 40 12

regress/screen-redraw-results/floating-border-rounded.result

@@ -1,12 +0,0 @@
-base
-    ╭──────────────────────────╮
-    │FLOAT                     │
-    │                          │
-    │                          │
-    │                          │
-    │                          │
-    │                          │
-    ╰──────────────────────────╯
-
-
-

tmux.1

@@ -1,4 +1,4 @@
-.\" $OpenBSD: tmux.1,v 1.1170 2026/09/11 10:17:16 nicm Exp $
+.\" $OpenBSD: tmux.1,v 1.1169 2026/09/10 11:02:18 nicm Exp $
 .\"
 .\" Copyright (c) 2007 Nicholas Marriott <nicholas.marriott@gmail.com>
 .\"
@@ -14,7 +14,7 @@
 .\" IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
 .\" OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 .\"
-.Dd $Mdocdate: September 11 2026 $
+.Dd $Mdocdate: September 10 2026 $
 .Dt TMUX 1
 .Os
 .Sh NAME
@@ -5980,8 +5980,6 @@ single lines using ACS or UTF\-8 characters
 double lines using UTF\-8 characters
 .It heavy
 heavy lines using UTF\-8 characters
-.It rounded
-single lines with rounded corners using UTF\-8 characters
 .It simple
 simple ASCII characters
 .It number

tmux.h

@@ -1,4 +1,4 @@
-/* $OpenBSD: tmux.h,v 1.1440 2026/09/11 10:17:16 nicm Exp $ */
+/* $OpenBSD: tmux.h,v 1.1439 2026/09/10 11:02:18 nicm Exp $ */
 
 /*
  * Copyright (c) 2007 Nicholas Marriott <nicholas.marriott@gmail.com>
@@ -1150,8 +1150,7 @@ enum pane_lines {
 	PANE_LINES_SIMPLE,
 	PANE_LINES_NUMBER,
 	PANE_LINES_SPACES,
-	PANE_LINES_NONE,
-	PANE_LINES_ROUNDED
+	PANE_LINES_NONE
 };
 
 /* Pane border indicator option. */

window-border.c

@@ -1,4 +1,4 @@
-/* $OpenBSD: window-border.c,v 1.4 2026/09/11 10:17:16 nicm Exp $ */
+/* $OpenBSD: window-border.c,v 1.3 2026/07/23 09:38:27 nicm Exp $ */
 
 /*
  * Copyright (c) 2026 Nicholas Marriott <nicholas.marriott@gmail.com>
@@ -120,10 +120,6 @@ window_get_border_cell(struct window_pane *wp, enum pane_lines pane_lines,
 		gc->attr &= ~GRID_ATTR_CHARSET;
 		utf8_copy(&gc->data, tty_acs_heavy_borders(cell_type));
 		break;
-	case PANE_LINES_ROUNDED:
-		gc->attr &= ~GRID_ATTR_CHARSET;
-		utf8_copy(&gc->data, tty_acs_rounded_borders(cell_type));
-		break;
 	case PANE_LINES_SIMPLE:
 		gc->attr &= ~GRID_ATTR_CHARSET;
 		utf8_set(&gc->data, SIMPLE_BORDERS[cell_type]);