No assembler spells these `vld1_lane` or `vmov_lane`; they are `vld1`
and `vmov` with a lane-indexed operand. All nine are now their base
mnemonic. Merging them meant fixing what the separate names had been
hiding.
VLD1_LANE and VST1_LANE were byte-for-byte duplicates of forms VLD1 and
VST1 already had, with a looser mask, and neither encoded the lane --
both used .VD_D, which has no lane field. `vld1.8 {d0[3]}, [r0]`
disassembled as `vld1.8 d0, [r0]`. VMOV had the same shape: its own
DPR_ELEM form dropped the index, while VMOV_LANE's three forms carried
the per-size encodings that actually work. The lane-dropping forms are
gone and the working ones now sit under the base mnemonic.
VLD2-4/VST2-4's single-lane forms left bits 9:8 free, and that field is
what separates VLD1/2/3/4 -- so VLD4's encoding matched VLD2's entry and
disassembled as the wrong instruction.
Two more things the lane could not survive. A lane index of 0 printed
nothing, because 0 doubled as "no lane" -- `vmov.32 d0[0], r0` came out
as `vmov.32 d0, r0`, a different instruction. And a lane inside a
register list was dropped entirely, so `{d0[1], d1[1]}` printed as
`{d0, d1}`.
The whole set is byte-exact against llvm-mc: 27 single-lane forms across
VLD1-4/VST1-4 and all three VMOV element sizes. arm32 is 1649/1649 on
the sweep and 436/436 on the table checks, with the stale expectations
for the forms this corrected updated to the verified values.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018UmHLRF11EoWwNWCJ7JGaA
`vpush {d8, d9}` came out as `vpush {r2}`. VFP list operands kept only
the 8-bit count from the encoding and stored it in a REG_LIST operand,
whose immediate the printer reads as a GPR bitmask -- so the register
bank was wrong, the start register was gone entirely, and the count was
read as a bitmask. `vldm r0, {d1, d2, d3}` printed `{r1-r2}`.
A list is now a register plus a shape: how many, and what the run steps
by. VLDM/VSTM/VPUSH/VPOP recover their start register from Vd and their
count from imm8. A GPR list stays a bitmask, since `{r4, lr}` is not a
run at all.
The NEON structure loads were wrong in a second way. VLD1-4/ST1-4 encode
their register count in the type field at bits 11:8, not in imm8, so
writing a count into the low byte overwrote size, alignment and Rm. Rm
was left at 0, which is a register post-increment, where the plain form
needs 0b1111; every one of those 23 forms encoded a writeback nobody
asked for. The count now comes from the form, the encoding writes only
Vd, and Rm is fixed in the pattern.
Deriving those counts from llvm-mc rather than by hand turned up a
dimension that was not modelled at all: the spaced forms step two
registers at a time (`vld2.8 {d2, d4}`), and VLD1 has a to-all-lanes
form written `{d2[]}`.
All 31 A32 list forms are now byte-exact against llvm-mc, from 8. The
arm32 sweep holds at 1656/1656.
Still open here: those forms only exist for .8 data, because the size
field at bits 7:6 is unencoded, and the writeback variants
(`[r0]!`, `[r0], r1`) are not modelled.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018UmHLRF11EoWwNWCJ7JGaA
x86 keeps Instruction at 64 bytes -- one cache line -- by packing its memory
operand into a bit_field u64 rather than a struct. arm32 and arm64 both used
a 12-byte Memory struct, and since Memory sits in every Operand that width is
multiplied by four in every Instruction. Adopting x86's trick, plus two
smaller things, takes both ARM ISAs under the cache line.
Instruction ops[4] Operand Memory
x86 64 48 12 8
arm32 88 -> 48 72->40 18->10 12->8
arm64 64 -> 48 56->40 14->10 12->8
Memory -> bit_field u64, both ISAs. Field syntax and composite literals are
unchanged, so callers see nothing. Registers keep their type: an arm64
Register never exceeds 0x0C1F and an arm32 one never exceeds 0x401F, but the
arm64 NONE sentinel is 0xFFFF, so arm64 gives them the full 16 bits and arm32
15. What is left goes to `disp`: 23 bits on arm64 (worst case 65,520, from
LDR Q, [Xn, #imm12*16]) and 19 on arm32 (worst case 4,095, an A32 imm12) --
64x and 32x headroom respectively.
arm32 Operand also carried four tail bytes arm64 does not. `cond` was dead:
nine builders wrote it and nothing in the package ever read it, and
Instruction.cond already exists. shift_type/shift_amt/lane now ride inside
the union alongside the register they describe -- they only ever apply to a
register operand -- via a `using` bit_field, so op.reg, op.shift_type,
op.shift_amt and op.lane still read and write exactly as before.
arm32 Instruction packs cond, operand_count, mode, length and the two flag
bits into one 16-bit word; they need 13 bits between them and were spending
six bytes. `using` again keeps the field names, with the one exception that
inst.flags.sets_flags is now inst.sets_flags (five call sites).
Verified: every rexcode suite matches baseline; both generators stay
idempotent; arm64 is 73/73 byte-exact against llvm-mc on both encode and
decode round-trip; arm32's 1680/1680 sweep still passes and a memory/shift
encode spot-check is byte-identical to what the same code produced before
this commit.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
NEON reuses one operand shape across every element width, so `vadd.i8` and
`vadd.f32` are both DPR,DPR,DPR and only the type separates their encodings.
The type existed nowhere in the data: the encoder could reach the first form
of a shape and no other, and the printer reconstructed a suffix from the bit
pattern at print time. 489 of 1680 forms -- 29% of the table -- were
unreachable, and `inst_vadd(d0,d1,d2)` could only ever produce VFP vadd.f64.
Add `Data_Type` and carry `dt: [2]Data_Type` on Instruction, Encoding and
Decode_Entry. Two slots because the convert family names both ends
(`vcvt.s32.f32`); everything else leaves the second .NONE. In A64 the
arrangement belongs to each operand (`add v0.4s, v1.4s, v2.4s`); in A32 it
belongs to the instruction, which is why it goes here and not on Operand.
Instruction does not grow: it lands in bytes that were already padding, so
88 stays 88. Encoding and Decode_Entry go 21 -> 23, which is +3,360 B per
table, +6.7 KB in all.
The per-form type is derived from llvm-mc rather than hand-written: assemble
each form's canonical word, disassemble it, take the suffix. 942 forms carry
one, 38 carry two. (`.w` is the Thumb wide qualifier, not a type, and is
excluded.)
Effect: of 202 shape groups holding more than one form, 168 are now separated
by the type -- 429 of the 489 unreachable forms become selectable. `dt` left
at .NONE means "unspecified" and still takes the first matching form, so
every existing caller behaves exactly as before.
It also fixes printing. The old inference could only ever produce one type,
so the whole convert family printed `vcvt.f32` -- 13 forms sharing one string
that no assembler accepts. They now print `vcvt.f32.s32`, `vcvt.f64.f32`,
`vcvta.u32.f64`, and so on.
Verified: vadd.i8/i16/i32/i64/f32 encode to f2010802 / f2110802 / f2210802 /
f2310802 / f2010d02, matching llvm-mc exactly; all 11 rexcode suites are
identical to baseline.
Still unreachable, 60 forms in 34 groups: register lists (VLD2-4/VST2-4),
LDM/STM addressing modes, and a few lane-indexed and fixed-point convert
forms whose element size is not captured by the type alone.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Roll the encode/decode buffer-sizing helpers (added for x86 in 49787b7de) out
to every other ISA, and document them in the cross-arch naming contract.
Per arch (arm32, arm64, mips, riscv, ppc, ppc_vle, rsp, mos6502, mos65816):
- encode_max_code_size / encode_max_relocation_count now key off the
[]Instruction slice (were int counts); bodies unchanged (* MAX_INST_SIZE).
- encode_reserve(code, relocs, instructions): grows the caller's code []u8 by
length and reserves relocs by capacity; allocates no new buffers.
- decode_max_instruction_count / decode_estimate_instruction_count: exact
ceiling and typical estimate, keyed off the min/avg instruction size per
arch (fixed-4: arm64/mips/ppc/rsp; min-2: arm32/riscv/ppc_vle; min-1: mos).
- decode_reserve(instructions, inst_info, label_defs, data, exact=false).
docs/cross_arch_design.md: helpers added to the naming contract.
No behavior change to the existing size helpers (signature only). All 10 ISAs
check + test green (x86 2282, arm32 600, arm64 461, mips 281, riscv 154, ppc 31,
ppc_vle 281, rsp 70, mos6502 148, mos65816 53).
Move all ten ISA packages (x86, arm32, arm64, mips, riscv, ppc, ppc_vle,
rsp, mos6502, mos65816) from core/rexcode/<arch> to core/rexcode/isa/<arch>,
so the import pattern is now `import "core:rexcode/isa/x86"`. The shared
core stays at core:rexcode/isa.
Mechanical: relative `import "../isa"` / "../../isa" -> absolute
"core:rexcode/isa" (the only path that survives the move; the "../" and
"../.." self/generated imports move with their packages). build.lua now
builds paths as <root>/isa/<name>; stale `cd <arch>` hints in the verify
tools and the doc.odin paths updated.
WASM stays at core/rexcode/wasm for now -- it is an IR, not an ISA, and
will move under the forthcoming core:rexcode/ir once that layer lands.
All 10 arches gen/builders/check/test green; import core:rexcode/isa/x86
verified working; wasm still compiles.
