When a hardware keyboard is attached, it can take over 100 ms for the keyboard event to generate text input. In that case we want to record that we recently received a keyboard event so we don't synthesize duplicate virtual key press/release events for the input text.
(cherry picked from commit 648de4f9b8)
(cherry picked from commit 38c63afd64)
When a hardware keyboard is attached to an iPad, you can easily trigger a set of on-screen keyboard transitions that will take place over time, and we need to track whether we're currently showing or hiding the keyboard and make sure we don't clobber the existing state during those transitions.
Testing:
* Connected a hardware keyboard to an iPad
* Launched checkkeys
* Noted the keyboard bar was active at the bottom of the screen and text input was active
* Tapped with both fingers to quickly toggle text input off and back on
* Noted the keyboard bar slid down and then back up, and text input was active
* Tapped on the keyboard bar to bring up the full on-screen keyboard and then closed it so the keyboard bar was still active, and text input was still active
* Tapped on the screen to turn text input off, noted the keyboard bar slid down
* Tapped with both fingers to quickly toggle text input on and back off
* Noted that the keyboard bar slid up and then back down, and text input was inactive
* Tapped on the screen to turn text input on, tapped on the keyboard bar to bring up the full on-screen keyboard, and text input was active
* Pressed a key on the physical keyboard, the on-screen keyboard closed, the key press and release was delivered (with no text input) and then the keyboard bar slid up, and text input was active again
Fixes https://github.com/libsdl-org/SDL/issues/7979
(cherry picked from commit c3288d113e)
(cherry picked from commit 030bb7282a)
This is another attempt to make sure we don't cause beeps from unhandled key presses while still allowing full text input functionalty.
If this isn't selective enough, we might need to go up the responder chain to see what's going to handle the event before passing it along.
Fixes https://github.com/libsdl-org/SDL/pull/6962
(cherry picked from commit a8abe612ed)
(cherry picked from commit 335e9c769a)
This can happen if a monitor is in the process of becoming primary because another monitor was disconnected.
(cherry picked from commit 07578fde3d)
(cherry picked from commit 2468fccf7f)
This adds support for the back paddles, and the "..." key
which are not automatically detected.
* "Back" is mapped to the top left "two windows" key.
* "Start" is mapped to the top right "hambuger menu" key.
* "Guide" is mapped to the "Steam" key.
* The "..." key is just a generic button.
When looking at the screen, paddles are number
* P1: Top right
* P2: Top left
* P3: Bottom right
* P4: Botom Left
The new controller mapping was created with the SDL3 gamepadmap tool.
(cherry picked from commit 27b8abb056)
(cherry picked from commit f4561db69a)
- Fixed audio device detection and usage.
- Implemented audio capture support
- Refactored buffer handling to separate pointers to fill and drain buffers.
Based on patches by josch1710 and Lars Erdmann:
https://github.com/bitwiseworks/SDL2-os2/pull/7
(cherry picked from commit 890bee64a4)
This call is actually a left-over when porting from fcitx4 service to the new org.freedesktop.portal.Fcitx supported by both fcitx4/fcitx5. CloseIC is actually never a part of the new interface on org.freedesktop.portal.Fcitx. It cause any issue user visible effect.
In this case we know the controller has been on for a while and the Bluetooth connection LED cycle is complete.
Also fixed the timestamp being zero the first time it is checked
(cherry picked from commit bd4f155bbb)
(cherry picked from commit f7dc8c0eaa)
That will put the PS5 controller into enhanced mode, which breaks DirectInput games
(cherry picked from commit 2fef0be2f6)
(cherry picked from commit 910dad505a)
If, in the case where all displays has been disconnected, and some window state change occurs before an active display is re-added and finalized, the pointer returned by SDL_GetDisplayForWindow() will be null necessitating that the returned pointer be checked for validity before dereferencing it.
(cherry picked from commit a999100858)
If there is only one controller slot available, assume that's the one matching new RAWINPUt devices. This will be right most of the time, and uncorrelation will fix any bad guesses.
(cherry picked from commit 41882a1acb)
(cherry picked from commit 34c5bde355)
The xpad kernel driver doesn't know about these controllers and ends up using BTN_C and BTN_Z and the automatic mapping doesn't work correctly.
It turns out VID 0x045e and PID 0x02e0 is used by the 8BitDo SN30 Pro when connecting via Bluetooth in XInput mode.
Fixes https://github.com/libsdl-org/SDL/issues/7925
(cherry picked from commit 80e1c75e1c)
(cherry picked from commit 156c7badf5)
This fixes WGI correlation on startup when the WGI gamepad list isn't populated yet
(cherry picked from commit f047e178b6)
(cherry picked from commit f8a0135edf)
That will put the PS4 controller into enhanced mode, which breaks DirectInput games
(cherry picked from commit efed24850a)
(cherry picked from commit 1f7bc08884)
Initializing "Windows.Gaming.Input.Gamepad" will put Bluetooth PS4 controllers into enhanced report mode, which breaks any game using DirectInput. Let's wait to do this until absolutely necessary.
(cherry picked from commit 785f57eb91)
(cherry picked from commit de849d5e6f)
video(wayland): use both --icon and --icon-name for Zenity
Many distros ship an older version of Zenity that supports GTK3, while some distros ship newer version of Zenity which uses libadwaita.
This command tries to use --icon and fall back to --icon-name when it fails.
(cherry picked from commit b90343e512)
This fixes the following errors when a dll attempts to link to a shared SDL2::SDL2:
m.c.obj : error LNK2019: unresolved external symbol __imp___acrt_iob_func referenced in function printf
m.c.obj : error LNK2019: unresolved external symbol __imp___stdio_common_vfprintf referenced in function _vfprintf_l
MSVCRTD.lib(init.obj) : error LNK2019: unresolved external symbol _CrtDbgReport referenced in function _CRT_RTC_INIT
MSVCRTD.lib(init.obj) : error LNK2019: unresolved external symbol _CrtDbgReportW referenced in function _CRT_RTC_INITW
MSVCRTD.lib(error.obj) : error LNK2019: unresolved external symbol strcpy_s referenced in function "void __cdecl _RTC_StackFailure(void *,char const *)" (?_RTC_StackFailure@@YAXPEAXPEBD@Z)
MSVCRTD.lib(error.obj) : error LNK2019: unresolved external symbol strcat_s referenced in function "void __cdecl _RTC_StackFailure(void *,char const *)" (?_RTC_StackFailure@@YAXPEAXPEBD@Z)
MSVCRTD.lib(error.obj) : error LNK2019: unresolved external symbol __stdio_common_vsprintf_s referenced in function _vsprintf_s_l
MSVCRTD.lib(error.obj) : error LNK2001: unresolved external symbol __C_specific_handler_noexcept
MSVCRTD.lib(pdblkup.obj) : error LNK2019: unresolved external symbol _wmakepath_s referenced in function "int __cdecl GetPdbDllPathFromFilePath(wchar_t const *,wchar_t *,unsigned __int64)" (?GetPdbDllPathFromFilePath@@YAHPEB_WPEA_W_K@Z)
MSVCRTD.lib(pdblkup.obj) : error LNK2019: unresolved external symbol _wsplitpath_s referenced in function "int __cdecl GetPdbDllPathFromFilePath(wchar_t const *,wchar_t *,unsigned __int64)" (?GetPdbDllPathFromFilePath@@YAHPEB_WPEA_W_K@Z)
MSVCRTD.lib(pdblkup.obj) : error LNK2019: unresolved external symbol wcscpy_s referenced in function "int __cdecl GetPdbDllPathFromFilePath(wchar_t const *,wchar_t *,unsigned __int64)" (?GetPdbDllPathFromFilePath@@YAHPEB_WPEA_W_K@Z)
MSVCRTD.lib(pdblkup.obj) : error LNK2019: unresolved external symbol __vcrt_GetModuleFileNameW referenced in function "struct HINSTANCE__ * __cdecl GetPdbDll(void)" (?GetPdbDll@@YAPEAUHINSTANCE__@@XZ)
MSVCRTD.lib(pdblkup.obj) : error LNK2019: unresolved external symbol __vcrt_GetModuleHandleW referenced in function "struct HINSTANCE__ * __cdecl GetPdbDll(void)" (?GetPdbDll@@YAPEAUHINSTANCE__@@XZ)
MSVCRTD.lib(pdblkup.obj) : error LNK2019: unresolved external symbol __vcrt_LoadLibraryExW referenced in function "struct HINSTANCE__ * __cdecl GetPdbDll(void)" (?GetPdbDll@@YAPEAUHINSTANCE__@@XZ)
Also, for some reason ID3D11DeviceContext_OMGetRenderTargets() was failing in the second read pixels call in the "testautomation --filter render_testViewport" test.
We already know the target view, so just use that.
(cherry picked from commit 619f65af0c)
(cherry picked from commit 61808b03b5)
Don't use the viewport offset when setting the clip rect in the D3D12 renderer.
This fixes "testautomation --filter render_testViewport" on Windows
(cherry picked from commit 304d425f99)
(cherry picked from commit bf277eb808)
