fixes#24008
The old logic didn't check the contents of the output executables, when
it switched release->debug->release, it picked up the Json files used in
the first release building, the content of which didn't change. So it
mistook the executables which are built by the second debug building as
the functioning one.
`changeDetectedViaJsonBuildInstructions` needs a way to distinguish the
executables generated by different buildings.
refs #24207
The `-d:nimUseCAtomics` flag added in #24207 is now inverted and made
into `-d:nimUseCppAtomics`, which means C++ atomics are only enabled
with the define. This flag is now also documented and tested.
fixes#24203
`semTypeNode` is called twice for RHS'es of type sections,
[here](b0e6d28782/compiler/semstmts.nim (L1612))
and
[here](b0e6d28782/compiler/semstmts.nim (L1646)).
Each time `prev` is `s.typ`, but the assertion expects `prev == nil`
which is false since `s.typ` is not nil the second time. To fix this,
the `prev == nil` part of the assertion is removed.
The reason this only happens for types like `seq[int]`, `(int, int)` etc
is because they don't have syms: `semTypeIdent` attempts to directly
[replace the typedesc param
itself](b0e6d28782/compiler/semtypes.nim (L1916))
with the sym of the base type of the resolved typedesc type if it
exists, which means `semTypeNode` doesn't receive the typedesc param sym
to perform the assert.
refs https://github.com/nim-lang/Nim/pull/24200#issuecomment-2382501282
Workaround for C++ Atomic[T] issues that doesn't require a compiler
change. Not tested or documented in case it's not meant to be officially
supported, locally tested `tatomics` and #24159 to work with it though,
can add these as tests if required.
fixes#22523
There were 2 problems with the code in `sameType` for
`dcEqIgnoreDistinct`:
1. The code that skipped `{tyDistinct, tyGenericInst}` only ran if the
given types had different kinds. This is fixed by always performing this
skip.
2. The code block below that checks if `tyGenericInst`s have different
values still ran for `dcEqIgnoreDistinct` since it checks if the given
types are generic insts, not the skipped types (and also only the 1st
given type). This is fixed by only invoking this block for `dcEq`;
`dcEqOrDistinctOf` (which is unused) also skips the first given type.
Arguably there is another issue here that `skipGenericAlias` only ever
skips 1 type.
These combined fix the issue (`T` is `GenericInst(V, 1, distinct int)`
and `D[0]` is `GenericInst(D, 0, distinct int)`).
#24037 shouldn't be a dependency but the diff follows it.
Sorry I don't have a test case or issue for this. `injectdestructors` is
supposed to add a final bool argument to `=copy` and `=dup` to mark
cyclic types, as generated by `liftdestructors`. Hence this flag is
added after every call to `genCopy`, but `genCopy` can generate a
`=sink` call when passed the flag `IsExplicitSink` by `nkSinkAsgn`. This
creates a codegen error, saying the sink received an extra argument.
This is fixed by not adding the argument on the flag `IsExplicitSink`.
This is a followup to #20585 which is on the 2.0 branch, hence this is
marked backport.
based on #24127
Needs some tweaks to replace the other `struct` type generations, e.g.
seqs, maybe by exposing `BaseTypeKind` as a parameter. C++ and
codegenDecl etc seem like they are going to need attention.
Also `Builder` should really be `distinct string` that one has to call
`extract` on, but for this to be optimal in the current codegen, we
would need something like:
```nim
template buildInto(s: var string, builderName: untyped, body) =
template `builderName`: untyped = Builder(s)
body
buildInto(result, builder):
builder.add ...
```
but this could be a separate PR since it might not work with the
compiler. The possibly-not-optimal alternative is to do:
```nim
template build(builderName: untyped, body): string =
var `builderName` = Builder("")
body
extract(`builderName`)
result = build(builder):
builder.add ...
```
where the compiler maybe copies the built string but shouldn't.
---------
Co-authored-by: ringabout <43030857+ringabout@users.noreply.github.com>
fixes#19010
`getType` for proc types generated an `nkProcTy` for iterator types
instead of `nkIteratorTy`, and didn't generate a calling convention
pragma unless it was in the proc AST. Iterator types now generate
`nkIteratorTy`, and a calling convention pragma is added if the calling
convention isn't `closure` or was explicitly provided.
fixes#11422, refs #8336/#8333, refs #20130
The compiler generates conversion nodes *after* evaluating the branches
of case statements as constants, the reasoning is that case branches
accept constants of different types, like arrays or sets. But this means
that conversion nodes that need to be evaluated like converter calls
don't get evaluated as a constant for codegen. #8336 fixed this by
re-evaluating the node if an `nkHiddenCallConv` was created, and in
#20130 this logic also had to be added for `nkHiddenStdConv` for
cstrings. This logic was only for single case elements, it has now been
added to range elements as well to fix#11422. Additionally, all
conversion nodes are now evaluated for simplicity, but maybe this won't
pass CI.
fixes#19866 given #23997
When searching for a module-qualified symbol, `qualifiedLookUp` tries to
obtain the raw identifier from the RHS of the dot field. However it only
does this when the RHS is either an `nkIdent` or an `nkAccQuoted` node,
not when the node is a resolved symbol or a symchoice, such as in
templates and generics when the module symbol can't be resolved yet.
Since the LHS is a module symbol when the compiler checks for this, any
resolved symbol information doesn't matter, since it has to be a member
of the module. So we now obtain the identifier from these nodes as well
as the unresolved identifier nodes.
The test is a bit niche and possibly not officially supported, but this
is likely a more general problem and I just couldn't think of another
test that would be more "proper". It's better than the error message
`'a' has no type` at least.
fixes#24179
The original fix made it so calls to `skError`/`skUnknown` (in this case
`->`, for some reason `sugar` couldn't be imported) returned an error
node, however this breaks tsug_accquote for some reason I don't
understand (it even parses as `tsug_accquote.discard`) so I've just
added a guard based on the stacktrace.
fixes#19277, refs #24169, refs #18124
When pragmas are pushed to a routine, if the routine symbol AST isn't
nil by the time the pushed pragmas are being processed, the pragmas are
implicitly added to the symbol AST. However this is done without
restriction on the pragma, if the pushed pragma isn't supposed to apply
to the routine, it's still added to the routine. This is why the symbol
AST for templates wasn't set before the pushed pragma processing in
#18124. Now, the pragmas added to the AST are restricted to ones that
apply to the given routine. This means we can set the template symbol
AST earlier so that the pragmas get added to the template AST.
fixes#24164, regression from #20091
The expression `nil` as the default value of template parameter `x:
untyped` is typechecked with expected type `untyped` since #20091. The
expected type is checked if it matches the `nil` literal with a match
better than a subtype match, and the type is set to it if it does.
However `untyped` matches with a generic match which is better, so the
`nil` literal has type `untyped`. This breaks type matching for the
literal. So if the expected type is `untyped` or `typed`, it is now
ignored and the `nil` literal just has the `nil` type.
When importing from subdirectories, the line info used in `UnusedImport`
warning would be the `/` node and not the actual module node. More
obvious with grouped imports where all unused imports would show the
same column
Fix is to just use the last child node for infixes when getting the line
info
Added in #24119, the test checks if every string produced is equal, but
the value of the strings depend on the `now()` timestamp of when they
were produced. 30 of them are produced in a for loop in sequence with
each other, but the first one is set after the data is marshalled into
and unmarshalled from a file. This means the timestamp strings can
differ depending on the execution time and causes this test to be flaky.
Instead we just make 2 strings from the same data and check if they
equal each other.
fixes#24150, refs #22022
An exception is raised in the `semExprWithType` call, which means `dec
c.inTypeofContext` is never called, but `compiles` allows compilation to
continue. This means `c.inTypeofContext` is left perpetually nonzero,
which prevents `compileTime` evaluation for the rest of the program.
To fix this, `defer:` is used for the `dec c.inTypeofContext` call, as
is done for
[`instCounter`](d51d88700b/compiler/seminst.nim (L374))
in other parts of the compiler.
Since the module allows for a handler to be added multiple times, for
the sake of consistency, `removeHandler` only removes the first found
instance of the handler in the `handlers` seq. So for n calls of
`addHandler` using the same handler, n calls of `removeHandler` are
required.
fixes#23757
---------
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
This fixes a logic error in #23870
The inheritance penalty should be -1 if there is no inheritance
relationship. Not sure how to write a test case for this one honestly.
---------
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
fixes#22276
When matching against `tyFromExpr`, the compiler tries to instantiate it
then operates on the potentially instantiated type. But the way it does
this is inverted, it checks if the instantiated type matches the
argument type, not if the argument type matches the instantiated type.
This has been the case since
ac271e76b1 (diff-251afcd01d239369019495096c187998dd6695b6457528953237a7e4a10f7138),
which doesn't comment on it, so I'm guessing this isn't intended. I
don't know if it would break anything though.
refs #24010, refs
https://github.com/nim-lang/Nim/issues/24125#issuecomment-2358377076
The generic mismatch errors added in #24010 made it possible for `nArg`
to be `nil` in the error reporting since it checked the call argument
list, not the generic parameter list for the mismatching argument node,
which causes a segfault. This is fixed by checking the generic parameter
list immediately on any generic mismatch error.
Also the `typedesc` type is skipped for the value of the generic params
since it's redundant and the generic parameter constraints don't have
it.
fixes#21441
When compiling for JS, nimscript config files have both `defined(js)`
and `defined(nimscript)` be true at the same time. This is required so
that the nimscript config file knows the current compilation is for the
JS backend. However the system module doesn't account for this in some
cases, defining JS-specific code or not defining nimscript-specific code
when compiling such nimscript files. To fix this, have the `nimscript`
define take priority over the `js` one.
fixes#22661
Range expressions in `of` branches in `case` statements start off as
calls to `..` then become `nkRange` when getting typed. For this reason
the compiler leaves `nkRange` alone when type checking the case
statements again, but it still does the exhaustiveness checking for the
entire case statement, and leaving the range alone means it doesn't
count the values of the range for exhaustiveness. So the counting is now
also done on `nkRange` nodes in the same way as when typechecking it the
first time.
alternative to #24101#23892 changed the opensym experimental switch so that it has to be
enabled in the context of the generic/template declarations capturing
the symbols, not the context of the instantiation of the
generics/templates. This was to be in line with where the compiler gives
the warnings and changes behavior in a potentially breaking way.
However `results` [depends on the old
behavior](71d404b314/results.nim (L1428)),
so that the callers of the macros provided by results always take
advantage of the opensym behavior. To accomodate this, we change the
behavior of the old experimental option that `results` uses,
`genericsOpenSym`, so that ignores the information of whether or not
symbols are intentionally opened and always gives the opensym behavior
as long as it's enabled at instantiation time. This should keep
`results` working as is. However this differs from the normal opensym
switch in that it doesn't generate `nnkOpenSym`.
Before it was just a generics-only version of `openSym` along with
`templateOpenSym` which was only for templates. So `templateOpenSym` is
removed along with this change, but no one appears to have used it.
split again from #24038, fixes
https://github.com/status-im/nimbus-eth2/pull/6554#issuecomment-2354977102
`var`/pointer types are no longer implicitly convertible to each other
if their element types either:
* require an int conversion or another conversion operation as long as
it's not to `openarray`,
* are subtypes with pointer indirection,
Previously any conversion below a subrange match would match if the
element type wasn't a pointer type, then it would error later in
`analyseIfAddressTaken`.
Different from #24038 in that the preview define that made subrange
matches also fail to match is removed for a simpler diff so that it can
be backported.
fixes#24112
Sym nodes in templates that could be open are [given `nil`
type](22d2cf2175/compiler/semtempl.nim (L274))
when `--experimentalOpenSym` is disabled so that they can be semchecked
to give a warning since #24007. The first nodes of object constructors
(in this case) and in type conversions don't replace their first node
(the symbol) with a typechecked one, they only call `semTypeNode` on it
and leave it as is.
Effect tracking checks if the type of a sym node has a destructor to
check if the node type should be replaced with the sym type. But this
causes a segfault when the type of the node is nil. To fix this, we
always set the node type to the sym type if the node type is nil.
Alternatively `semObjConstr` and `semConv` could be changed to set the
type of their first node to the found type but I'm not sure if this
would break anything. They could call `semExprWithType` on the first
node but `semTypeNode` would still have to be called (maybe call it
before?). This isn't a problem if the sym node has a type but is just
nested in `nkOpenSym` or `nkOpenSymChoice` which have nil type instead
(i.e. with openSym enabled), so maybe this still is the "most general"
solution, I don't know.
fixes#24097
For `nkConv` addresses where the conversion is between 2 types that are
equal between backends, treat assignments the same as assignments to the
argument of the conversion. In the VM this seems to be in `genAsgn` and
`genAsgnPatch`, as evidenced by the special logic for `nkDerefExpr` etc.
This doesn't handle ranges after #24037 because `sameBackendType` is
used and not `sameBackendTypeIgnoreRange`. This is so this is
backportable without #24037 and another PR can be opened that implements
it for ranges and adds tests as well. We can also merge
`sameBackendTypeIgnoreRange` with `sameBackendType` since it doesn't
seem like anything that uses it would be affected (only cycle checks and
the VM), but then we still have to add tests.
fixes#24121
Proc arguments can have typeclass type like `Foo | Bar` that `sigmatch`
handles specially before matching them to the param type, because they
wouldn't match otherwise. Not exactly sure why this existed but matching
any typeclass or unresolved type in generic contexts now fails the match
so typing the call is delayed until instantiation.
Also it turns out default values with `tyFromExpr` type depending on
other parameters was never tested, this also needs a patch to make the
`tyFromExpr` type `tfNonConstExpr` so it doesn't try to evaluate the
other parameter at compile time.
refs #24094, soft reverts #23787#23787 turned out to cause issues as described in #24094, but the
changes are still positive, so it is now only enabled if compiling with
`-d:nimOptIters`. Unfortunately the changes are really interwoven with
each other so the checks for this switch in the code are a bit messy,
but searching for `nimOptIters` should give the necessary clues to
remove the switch properly later on.
Locally tested that nimlangserver works but others can also check.
fixes#24104, refs #23955
The line `result.typ = dstTyp` added in #23955 changes the type of
`result`, which was the type of `n` due to the argument passed to
`newIntNodeT`, to the abstract type skipped `dstTyp`. The line is
removed to just keep the type as abstract.
fixes#24099
If an arbitrary expression without a proc type (in this case
`tyFromExpr`) is called, the compiler [passes it to overload
resolution](793cee4de1/compiler/semexprs.nim (L1223)).
But overload resolution also can't handle arbitrary expressions and
treats them as not participating at all, matching with the state
`csEmpty`. The compiler checks for this and gives an "identifier
expected" error. Instead, now if we are in a generic context and an
arbitrary expression call matched with `csEmpty`, we now return
`csNoMatch` so that `semResolvedCall` can leave it untyped as
appropriate.
The expression flag `efNoDiagnostics` is replaced with this check. It's
not checked anywhere else and the only place that uses it is
`handleCaseStmtMacro`. Replacing it with `efNoUndeclared`, we just get
`csEmpty` instead of `csNoMatch`, which is handled the same way here. So
`efNoDiagnostics` is now removed and `efNoUndeclared` is used instead.
follows up #24095
In #24095 a check was added that used `iterOverType` to check if a type
contained unresolved types, with the aim of always treating
`tyGenericBody` as resolved. But the body of the `tyGenericBody` is also
iterated over in `iterOverType`, so if the body of the type actually
used generic parameters (which isn't the case in the test added in
#24095, but is now), the check would still count the type as unresolved.
This is handled by not iterating over the children of `tyGenericBody`,
the only users of `iterOverType` are `containsGenericType` and
`containsUnresolvedType`, the first one always returns true for
`tyGenericBody` and the second one aims to always return false.
Unfortunately this means `iterOverType` isn't as generic of an API
anymore but maybe it shouldn't be used anymore for these procs.
fixes regression remaining after #24092
In #24092 `prepareNode` was updated so it wouldn't try to instantiate
generic type symbols (like `Generic` when `type Generic[T] = object`,
and `prepareNode` is what `tyFromExpr` uses in most of the compiler. An
exception is in sigmatch, which is now changed to use `prepareNode` to
make generic type symbols work in the same way as usual. However this
requires another change to work:
Dot fields and matches to `typedesc` on generic types generate
`tyFromExpr` in generic contexts since #24005, including generic type
symbols. But this means when we try to instantiate the `tyFromExpr` in
sigmatch, which increases `c.inGenericContext` for potentially remaining
unresolved expressions, dotcalls stay as `tyFromExpr` and so never
match. To fix this, we change the "generic type" check in dot fields and
`typedesc` matching to an "unresolved type" check which excludes generic
body types; and for generic body types, we only generate `tyFromExpr` if
the dot field is a generic parameter of the generic type (so that it
gets resolved only at instantiation).
Notes for the future:
* Sigmatch shouldn't have to `inc c.inGenericContext`, if a `tyFromExpr`
can't instantiate it's fine if we just fail the match (i.e. redirect the
instantiation errors from `semtypinst` to a match failure). Then again
maybe this is the best way to check for inability to instantiate.
* The `elif c.inGenericContext > 0 and t.containsUnresolvedType` check
in dotfields could maybe be simplified to just checking for `tyFromExpr`
and `tyGenericParam`, but I don't know if this is an exhaustive list.
fixes#23506#24065 broke compilation of template parameter default values that
depended on other template parameters. But this was never implemented
anyway, actually attempting to use those default values breaks the
compiler as in #23506. So these are now implemented as well as fixing
the regression.
First, if a default value expression uses any unresolved arguments
(generic or normal template parameters) in a template header, we leave
it untyped, instead of applying the generic typechecking (fixing the
regression). Then, just before the body of the template is about to be
explored, the default value expressions are handled in the same manner
as the body as well. This captures symbols including the parameters, so
the expression is checked again if it contains a parameter symbol, and
marked with `nfDefaultRefsParam` if it does (as an optimization to not
check it later).
Then when the template is being evaluated, when substituting a
parameter, if we try to substitute with a node marked
`nfDefaultRefsParam`, we also evaluate it as we would the template body
instead of passing it as just a copy (the reason why it never worked
before). This way we save time if a default value doesn't refer to
another parameter and could just be copied regardless.
fixes#24090
Generic body types are normally a sign of an uninstantiated type, and so
give errors when trying to instantiate them. However when instantiating
free user expressions like the nodes of `tyFromExpr`, generic default
params, static values etc, they can be used as arguments to macros or
templates etc (as in the issue). So, we don't try to instantiate generic
body type symbols at all in free expressions such as these (but not in
for example type nodes), and avoid the error.
In the future there should be a "concrete type" check for generic body
types different from the check in type instantiation to deal with things
like #24091, if we do want to allow this use of them.
fixes#5395
Previously values of `const` statements used the same scope as the
`const` statement itself, meaning variables could be declared inside
them and referred to in other statements in the same block. Now each
`const` value opens its own scope, so any variable declared in the value
of a constant can only be accessed for that constant.
We could change this to open a new scope for the `const` *section*
rather than each constant, so the variables can be used in other
constants, but I'm not sure if this is sound.
fixes#21353
```nim
result = newNodeIT(nkTupleConstr, info, t)
result.add(newNodeIT(nkNilLit, info, t))
result.add(newNodeIT(nkNilLit, info, t))
```
The old implementation uses `t` which is the type of the closure
function as its type. It is not correct and generates ((nil, nil), (nil,
nil)) for `default(closures)`. This PR creates `(tyPointer, tyPointer)`
for fake closure types just like what cctypes do.
Caught in https://github.com/metagn/applicates, I'm not sure which
commit causes this but it's also in the 2.0 branch (but not 2.0.2), so
it's not any recent PRs.
If a proc has a static parameter with type `static Foo[T]`, then another
parameter with type `static Bar[T, U]`, the generic instantiation for
`Bar` doesn't match `U` which has type `tyGenericParam`, but matches `T`
since it has type `tyTypeDesc`. The reason is that `concreteType`
returns the type itself for `tyTypeDesc` if `c.isNoCall` (i.e. matching
a generic invocation), but returns `nil` for `tyGenericParam`. I'm
guessing `tyGenericParam` is received here because of #22618, but that
doesn't explain why `T` is still `tyTypeDesc`. I'm not sure.
Regardless, we can just copy the behavior for `tyTypeDesc` to
`tyGenericParam` and also return the type itself when `c.isNoCall`. This
feels like it defeats the purpose of `concreteType` but the way it's
used doesn't make sense without it (generic param can't match another
generic param?). Alternatively we could loosen the `if concrete == nil:
return isNone` checks in some places for specific conditions, whether
`c.isNoCall` or `c.inGenericContext == 0` (though this would need
#24005).
fixes#23397
All ambiguous symbols generate symchoices for call arguments since
#23123. So, if a type mismatch receives a symchoice node for an
argument, we now treat it as an ambiguous identifier and list the
ambiguous symbols in the error message.
Adds a few fixes for when using code blocks with lines numbered
- Use CSS variables for the colours so that it works in dark mode
- Don't turn on normal table effects like hover and smaller font when
its a line number table
- With dochack.nim, don't add a clipboard copy button for the line
numbers at the side
[Example page showing the
changes](https://66dcde6e4a655efb70771d9a--dazzling-kitten-6c3419.netlify.app/)
fixes CI, refs #24066, refs #24065
The combination of #24065 and #24066 caused a CI failure where a `when`
branch that was never compiled gave an undeclared identifier error. This
is because the `when` branch was being semchecked with `semGenericStmt`
without `withinMixin`, which is the flag `semgnrc` normally gives to
`when` branch bodies. To fix this, just pass the whole `when` stmt to
`semGenericStmt` rather than the individual blocks.
The alternative would be to just replace the calls to `semGenericStmt`
with a new proc that does the same thing, just with the flags
`{withinMixin}`.
kqueue will remove pipes automatically if their read end is closed.
Unfortunately this means that trying to unregister it (which is
necessary to clean up resources & for consistency with other ioselectors
implementations) will set an ENOENT error, which currently raises an
exception.
(ETA: in other words, it is currently impossible to call unregister on a
pipe fd without potentially getting the selector into an invalid state
on platforms with kqueue.)
Avoid this issue by ignoring ENOENT errors returned from kqueue.
(Tested on FreeBSD. I added a test case to the tioselectors file; the
seemingly unrelated change is to fix a race condition that doesn't
appear on Linux, so that it would run my code too.)
fixes#15959
Another followup of #22029 and #24005, subscript expressions now
recognize when their parameters are generic types, then generating
tyFromExpr. `typeof` also now properly sets `tfNonConstExpr` to make it
usable in proc signatures. `lent` with brackets like `lent[T]` is also
now allowed.
I noticed after #24005 the auto-reported boot time in PRs increased from
around 8 seconds to 8.8 seconds, but I wasn't sure what could cause a
performance problem that made the compiler itself compile slower, most
of the changes were related to `static` which the compiler code doesn't
use too often. So I figured it was unrelated.
However there is still a performance problem with the changes to
`tryReadingGenericParam`. If an expression like `a.b` doesn't match any
of the default dot field behavior (for example, is actually a call
`b(a)`), the compiler does a final check to see if `b` is a generic
parameter of `a`. Since #24005, if the type of `a` is not
`tyGenericInst` or an old concept type, the compiler does a full
traversal of the type of `a` to see if it contains a generic type, only
then checking for `c.inGenericContext > 0` to not return `nil`. This
happens on *every* dot call.
Instead, we now check for `c.inGenericContext > 0` first, only then
checking if it contains a generic type, saving performance by virtue of
`c.inGenericContext > 0` being both cheap and less commonly true. The
`containsGenericType` could also be swapped out for more generic type
kind checks, but I think this is incorrect even if it might pass CI.
fixes#22342, fixes#22607
Another followup of #22029, `when` expressions in general in generic
type bodies now behave like `nkRecWhen` does since #24042, leaving them
as `tyFromExpr` if a condition is uncertain. The tests for the issues
were originally added but left disabled in #24005.
fixes#16700, fixes#20916, refs #24010
Fixes the instantiation issues for proc param default values encountered
in #24010 by:
1. semchecking generic default param values with `inGenericContext` for
#22029 and followups to apply (the bigger change in semtypes),
2. rejecting explicit generic instantiations with unresolved generic
types inside `inGenericContext` (sigmatch change),
3. instantiating the default param values using `prepareNode` rather
than an insufficient manual method (the bigger change in seminst).
This had an important side effect of references to other parameters not
working since they would be resolved as a symbol belonging to the
uninstantiated original generic proc rather than the later instantiated
proc. There is a more radical way to fix this which is generating ident
nodes with `tyFromExpr` in specifically this context, but instead we
just count them as belonging to the same proc in
`hoistParamsUsedInDefault`.
Other minor bugfixes:
* To make the error message in t20883 make sense, we now give a "cannot
instantiate" error when trying to instantiate a proc generic param with
`tyFromExpr`.
* Object constructors as default param values generated default values
of private fields going through `evalConstExpr` more than once, but the
VM doesn't mark the object fields as `nfSkipFieldChecking` which gives a
"cannot access field" error. So the VM now marks object fields it
generates as `nfSkipFieldChecking`. Not sure if this affects VM
performance, don't see why it would.
* The nkRecWhen changes in #24042 didn't cover the case where all
conditions are constantly false correctly, this is fixed with a minor
change. This isn't needed for this PR now but I encountered it after
forgetting to `dec c.inGenericContext`.
The magic `mArrGet`/`mArrPut` subscript overloads always match, so if a
subscript doesn't match any other subscript overloads and isn't a
regular language-handled subscript, it creates a fake overload mismatch
error in `semArrGet` that doesn't have any information (gives stuff like
"first mismatch at index: 0" for every single mismatch). Instead of
generating the fake mismatches, we only generate the fake mismatch for
`mArrGet`/`mArrPut`, and process every overload except them as a real
call and get the errors from there.
refs #21682, refs #24038
The `rangeBase` typetrait added in #21682 which gives the base type of a
range type is now added publicly to `typetraits`. Previously it was only
privately used in `repr_v2` and in `enumutils` since #24052
(coincidentally I didn't see this until now). This is part of an effort
to make range types easier to work with in generics, as mentioned in
#24038. Its use combined with #24037 is also tested.
The condition for the "enum to enum conversion" warning is now also
restricted to conversions between different enum base types, i.e.
conversion between an enum type and a range type of itself doesn't give
a warning. I put this in this PR since the test gave the warning and so
works as a regression test.
fixes#13979
Fixes templates in generics that use identifiers that aren't defined
yet, giving an early `undeclared identifier` error, by just marking
template bodies as in a mixin context in `semgnrc`.
in https://forum.nim-lang.org/t/12463 which seems reasonable enough to
me.
stdlib has several dozens of places doing result.setLen now, but if
`experimental:strictDefs` move sot on by default and there is no easy
way to locally suppress the warning we can revisit this.
fixes#24054
`readData` is not implemented for the VM as mentioned in the issue, but
`readDataStr` is, so that is used for `readStr` instead on the VM. We
could also just use it in general since it falls back to `readData`
anyway but it's kept the same otherwise for now.
Also where and why streams in general don't work in VM is now documented
on the top level `streams` module documentation.
refs #24032, split from #24036
Conversion from variables of range types or base types of range types to
the other are now considered mutable for `var` params, similar to how
distinct types are mutable when converted to their base type or vice
versa. There are 2 main differences:
1. Conversions from base types to range types need to emit
`nkChckRange`, which is not generated for things like tuple/object
fields.
2. Range types can still correspond to different types in the backend
when nested in other types, such as `set[range[3..5]]` vs
`set[range[0..5]]`.
Since the convertibility check for `var` params and a check whether to
emit a no-op for `nkConv` (and now also `nkChckRange`) so that the
output is still addressable both use `sameType`, we accomplish this by
adding a new flag to `sameType` that ignores range types, but only when
they're not nested in other types. The implementation for this might be
flawed, I didn't include children of some metatypes as "nested in other
types", but stuff like `tyGenericInst` params are respected.
fixes#24044
When matching a `tyFromExpr` against a `static` generic parameter,
`paramTypesMatch` tries to evaluate it as a constant expression, which
causes a segfault in the case of #24044. In #24005 a consequence of the
same behavior was an issue where `nkStaticExpr` was created for
`tyFromExpr` which made it not instantiate, so only the generation of
`nkStaticExpr` was disabled. Instead we now just completely ignore
`tyFromExpr` matching a `static` generic parameter in generic contexts
and keep it untouched.
fixes#24048
Generic lambdas get instantiated via `replaceTypesInBody` which calls
`replaceTypeVarsN` on the body of the lambda. This body can contain sym
nodes of gensym symbols generated by macros, which have `nil` type. But
a piece of code in `replaceTypeVarsN` checks whether the type of a
symbol is equal to `void` without checking if it's `nil` first, which
causes a segfault. Now it also checks that the type of the symbol isn't
`nil` for it to be `void`.
fixes#16376
The way the compiler handled generic proc instantiations in calls (like
`foo[int](...)`) up to this point was to instantiate `foo[int]`, create
a symbol for the instantiated proc (or a symchoice for multiple procs
excluding ones with mismatching generic param counts), then perform
overload resolution on this symbol/symchoice. The exception to this was
when the called symbol was already a symchoice node, in which case it
wasn't instantiated and overloading was called directly ([these
lines](b7b1313d21/compiler/semexprs.nim (L3366-L3371))).
This has several problems:
* Templates and macros can't create instantiated symbols, so they
couldn't participate in overloaded explicit generic instantiations,
causing the issue #16376.
* Every single proc that can be instantiated with the given generic
params is fully instantiated including the body. #9997 is about this but
isn't fixed here since the instantiation isn't in a call.
The way overload resolution handles explicit instantiations by itself is
also buggy:
* It doesn't check constraints.
* It allows only partially providing the generic parameters, which makes
sense for implicit generics, but can cause ambiguity in overloading.
Here is how this PR deals with these problems:
* Overload resolution now always handles explicit generic instantiations
in calls, in `initCandidate`, as long as the symbol resolves to a
routine symbol.
* Overload resolution now checks the generic params for constraints and
correct parameter count (ignoring implicit params). If these don't
match, the entire overload is considered as not matching and not
instantiated.
* Special error messages are added for mismatching/missing/extra generic
params. This is almost all of the diff in `semcall`.
* Procs with matching generic parameters now instantiate only the type
of the signature in overload resolution, not the proc itself, which also
works for templates and macros.
Unfortunately we can't entirely remove instantiations because overload
resolution can't handle some cases with uninstantiated types even though
it's resolved in the binding (see the last 2 blocks in
`texplicitgenerics`). There are also some instantiation issues with
default params that #24005 didn't fix but I didn't want this to become
the 3rd huge generics PR in a row so I didn't dive too deep into trying
to fix them. There is still a minor instantiation fix in `semtypinst`
though for subscripts in calls.
Additional changes:
* Overloading of `[]` wasn't documented properly, it somewhat is now
because we need to mention the limitation that it can't be done for
generic procs/types.
* Tests can now enable the new type mismatch errors with just
`-d:testsConciseTypeMismatch` in the command.
Package PRs:
- using fork for now:
[combparser](https://github.com/PMunch/combparser/pull/7) (partial
generic instantiation)
- merged: [cligen](https://github.com/c-blake/cligen/pull/233) (partial
generic instantiation but non-overloaded + template)
- merged: [neo](https://github.com/andreaferretti/neo/pull/56) (trying
to instantiate template with no generic param)
fixes#24041
`when` statements in generic object types normally just leave their
conditions as expressions and still typecheck their branch bodies.
Instead of this, when the condition can be evaluated as a constant as
well as the ones before it and it resolves to `true`, it now uses the
body of that branch without typechecking the remaining ones.
closes#1969, closes#7547, closes#7737, closes#11838, closes#12283,
closes#12714, closes#12720, closes#14053, closes#16118, closes
#19670, closes#22645
I was going to wait on these but regression tests even for recent PRs
are turning out to be important in wide reaching PRs like #24010.
The other issues with the working label felt either finnicky (#7385,
#9156, #12732, #15247), excessive to test (#12405, #12424, #17527), or I
just don't know what fixed them/what the issue was (#16128: the PR link
gives a server error by Github, #12457, #12487).
Removes some noise from the bug report issue template so people who
aren't familiar can submit issues with less friction. Some of these
might be a bit subjective, feel free to call out any nitpicky parts, I
didn't want to rewrite entirely. Mostly fixed typos & language issues,
other than that:
* Just "detailed information", no need to say "descriptive", and changed
"reproducible code and detailed information" to "or detailed
information" because code is good enough
* Simplified description label, mention code example can go there
* Changed "Possible Solution" to "Known Workarounds" because it's what
issue authors are more likely to know (and usually write anyway) and is
more useful to most readers.
* Doc link for "rebuilding the compiler" was broken, replaced it with
mentioning choosenim, nightlies and building a temp compiler which is
hopefully less offputting
Weird looking preview
[here](https://github.com/metagn/Nim/blob/issue-templates/.github/ISSUE_TEMPLATE/bug_report.yml)
Just to complain: Github issue forms have some problems themselves,
there's no option to disable the "No response" text when an optional
area is unfilled, and the textboxes are really small at least on Firefox
(though you can expand them). The alternative, issue templates, isn't
much better. Github also hides the ability to open a blank issue in a
text link in a small line after all the issue form buttons, I'm guessing
this is intentional for repositories which don't want blank issues but
we don't have such a problem. Worst comes to worst we can add a button
for a minimal/empty issue template.
fixes#12539, refs #21636
`evalInclude` now uses `getPIdent` to check if a symbol isn't `/`
anymore instead of assuming it's an ident, which it's not when used in
templates. Also it just checks if the symbol is `as` now, because there
are other infix operators that could be used like `/../`.
It also works with prefix operators now by copying what was done in
#21636.
#23992 The test case provided does not cover the Windows situation, I
fixed it in this new PR.
Fixed an issue where errorCode was always 0 when startProcess didn't use
the poEvalCommand flag.
Tthe sleep command might not be available in all Windows installations,
so I skipped the relevant test.
Added a test case, tested on my fedora and windows systems.
fixes#15314, fixes#24002
The OpenSym behavior first added to generics in #23091 now also applies
to templates, since templates can also capture symbols that are meant to
be replaced by local symbols if the context imports symbols with the
same name, as in the issue #24002. The experimental switch
`templateOpenSym` is added to enable this behavior for templates only,
and the experimental switch `openSym` is added to enable it for both
templates and generics, and the documentation now mainly mentions this
switch.
Additionally the logic for `nkOpenSymChoice` nodes that were previously
wrapped in `nkOpenSym` now apply to all `nkOpenSymChoice` nodes, and so
these nodes aren't wrapped in `nkOpenSym` anymore. This means
`nkOpenSym` can only have children of kind `nkSym` again, so it is more
in line with the structure of symchoice nodes. As for why they aren't
merged with `nkOpenSymChoice` nodes yet, we need some way to signal that
the node shouldn't become ambiguous if other options exist at
instantiation time, we already captured a symbol at the beginning and
another symbol can only replace it if it's closer in scope and
unambiguous.
updated version of #22193
After #22029 and the followups #23983 and #24005 which fixed issues with
it, `tyFromExpr` no longer match any proc params in generic type bodies
but delay all non-matching calls until the type is instantiated.
Previously the mechanism `fauxMatch` was used to pretend that any
failing match against `tyFromExpr` actually matched, but prevented the
instantiation of the type until later.
Since this mechanism is not needed anymore for `tyFromExpr`, it is now
only used for `tyError` to prevent cascading errors and changed to a
bool field for simplicity. A change in `semtypes` was also needed to
prevent calling `fitNode` on default param values resolving to type
`tyFromExpr` in generic procs for params with non-generic types, as this
would try to coerce the expression into a concrete type when it can't be
instantiated yet.
The aliases `tyProxy` and `tyUnknown` for `tyError` and `tyFromExpr` are
also removed for uniformity.
Follow up of #23927 which solves the build error.
This is still only a partial fix as it doesn't take into account
unordered enums. I'll make a separate issue for those.
---------
Co-authored-by: ringabout <43030857+ringabout@users.noreply.github.com>
This is a very niche case encountered in #24012, where an int literal
got a `range` type as a result of a generic instantiation (in
`tgenericcomputedrange`), I can't think of another test case. The base
type of the range being `int` made it match `int` with `isSubrange` as
in the first `if` branch, but other int types like `int32` matched with
`isFromIntLit` which is a better match.
Instead, int literals with range type now:
1. match their base type with `isFromIntLit`,
2. don't match other int types with `isFromIntLit`, instead giving
`isConvertible` as in the last `if` branch in `handleRange`.
fixes#4228, fixes#4990, fixes#7006, fixes#7008, fixes#8406, fixes
#8551, fixes#11112, fixes#20027, fixes#22647, refs #23854 and #23855
(remaining issue fixed), refs #8545 (works properly now with
`cast[static[bool]]` changed to `cast[bool]`), refs #22342 and #22607
(disabled tests added), succeeds #23194
Parameter and return type nodes in generic procs now undergo the same
`inGenericContext` treatment that nodes in generic type bodies do. This
allows many of the fixes in #22029 and followups to also apply to
generic proc signatures. Like #23983 however this needs some more
compiler fixes, but this time mostly in `sigmatch` and type
instantiations.
1. `tryReadingGenericParam` no longer treats `tyCompositeTypeClass` like
a concrete type anymore, so expressions like `Foo.T` where `Foo` is a
generic type don't look for a parameter of `Foo` in non-generic code
anymore. It also doesn't generate `tyFromExpr` in non-generic code for
any generic LHS. This is to handle a very specific case in `asyncmacro`
which used `FutureVar.astToStr` where `FutureVar` is generic.
2. The `tryResolvingStaticExpr` call when matching `tyFromExpr` in
sigmatch now doesn't consider call nodes in general unresolved, only
nodes with `tyFromExpr` type, which is emitted on unresolved expressions
by increasing `c.inGenericContext`. `c.inGenericContext == 0` is also
now required to attempt instantiating `tyFromExpr`. So matching against
`tyFromExpr` in proc signatures works in general now, but I'm
speculating it depends on constant folding in `semExpr` for statics to
match against it properly.
3. `paramTypesMatch` now doesn't try to change nodes with `tyFromExpr`
type into `tyStatic` type when fitting to a static type, because it
doesn't need to, they'll be handled the same way (this was a workaround
in place of the static type instantiation changes, only one of the
fields in the #22647 test doesn't work with it).
4. `tyStatic` matching now uses `inferStaticParam` instead of just range
type matching, so `Foo[N div 2]` can infer `N` in the same way `array[N
div 2, int]` can. `inferStaticParam` also disabled itself if the
inferred static param type already had a node, but `makeStaticExpr`
generates static types with unresolved nodes, so we only disable it if
it also doesn't have a binding. This might not work very well but the
static type instantiation changes should really lower the amount of
cases where it's encountered.
5. Static types now undergo type instantiation. Previously the branch
for `tyStatic` in `semtypinst` was a no-op, now it acts similarly to
instantiating any other type with the following differences:
- Other types only need instantiation if `containsGenericType` is true,
static types also get instantiated if their value node isn't a literal
node. Ideally any value node that is "already evaluated" should be
ignored, but I'm not sure of a better way to check this, maybe if
`evalConstExpr` emitted a flag. This is purely for optimization though.
- After instantiation, `semConstExpr` is called on the value node if
`not cl.allowMetaTypes` and the type isn't literally a `static` type.
Then the type of the node is set to the base type of the static type to
deal with `semConstExpr` stripping abstract types.
We need to do this because calls like `foo(N)` where `N` is `static int`
and `foo`'s first parameter is just `int` do not generate `tyFromExpr`,
they are fully typed and so `makeStaticExpr` is called on them, giving a
static type with an unresolved node.
fixes#23898, supersedes #23966 and #23990
Since #20631 ambiguous type symbols in templates are rejected outright,
now we generate a symchoice for type nodes if they're ambiguous, a
generalization of what was done in #22375. This is done for generics as
well. Symchoices also handle type symbols better now, ensuring their
type is a `typedesc` type; this probably isn't necessary for everything
to work but it makes the logic more robust.
Similar to #23989, we have to prepare for the fact that ambiguous type
symbols behave differently than normal type symbols and either error
normally or relegate to other routine symbols if the symbol is being
called. Generating a symchoice emulates this behavior, `semExpr` will
find the type symbol first, but since the symchoice has other symbols,
it will count as an ambiguous type symbol.
I know it seems spammy to carry around an ambiguity flag everywhere, but
in the future when we have something like #23104 we could just always
generate a symchoice, and the symchoice itself would carry the info of
whether the first symbol was ambiguous. But this could harm compiler
performance/memory use, it might be better to generate it only when we
have to, which in the case of type symbols is only when they're
ambiguous.
It speeds up
```nim
proc foo =
let piece = cast[seq[char]](newSeqUninit[uint8](5220600386'i64))
foo()
```
Notes that `cast[ref](...)` is excluded because we need to keep the ref
alive if the parameter is something with pointer types (e.g.
`cast[ref](pointer)`or `cast[ref](makePointer(...))`)
---------
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
fixes#21258
When a generic proc is instantiated, if one of the default values
doesn't match the type of the parameter, `seminst` sets the default
parameter node to an `nkEmpty` node with `tyError` type. `sigmatch`
checks for this to give an error message if the default param is
actually used, but only while actively matching the proc signature,
before the proc is even instantiated. The error message also gives very
little information.
Now, we check for this in `updateDefaultParams` at the end of
`semResolvedCall`, after the proc has been instantiated. The `nkEmpty`
node also is given the original mismatching type instead rather than
`tyError`, only setting `tyError` after erroring to prevent cascading
errors. The error message is changed to the standard type mismatch error
also giving the instantiation info of the routine.
fixes#19737
As in the diff, `semResolvedCall` sets the return type of a call to a
proc to the type of the call. But in the case of the [subscript
magic](https://nim-lang.org/docs/system.html#%5B%5D%2CT%2CI), this type
is the first generic param which is also supposed to be the type of the
first argument, but this is invalid, the correct type is the element
type eventually given by `semSubscript`. Some lines above also [prevent
the subscript magics from instantiating their
params](dda638c1ba/compiler/semcall.nim (L699))
so this type ends up being an unresolved generic param.
Since the type of the node is not `nil`, `prepareOperand` doesn't try to
type it again, and this unresolved generic param type ends up being the
final type of the node. To prevent this, we just never set the type of
the node if we encountered a subscript magic.
Maybe we could also rename the generic parameters of the subscript
magics to stuff like `DummyT`, `DummyI` if we want this to be easier to
debug in the future.
fixes#23998
In `fitNode` the first symbol of a symchoice that expects an enum type
with the same enum type is given as the result of the `fitNode`. But
`getConstExpr` is also called on it, which will return a `nil` node for
nodes that aren't constant but have the enum type, like variables or
proc parameters. Instead we just return the node directly since it's
already typed.
Normally, this `if` branch in `fitNode` shouldn't exist since
`paramTypesMatch` handles it, but the way pure enum symbols work makes
it really impractical to check their ambiguity, which `paramTypesMatch`
won't like. If it causes problems for regular enums we can restrict this
branch to just pure enums until they are hopefully eventually removed.
fixes#23893
When type symbols are ambiguous, calls to them aren't allowed to be type
conversions and only routine symbols are considered instead. But the
compiler doesn't acknowledge that qualified symbols can be ambiguous,
`qualifiedLookUp` directly tries to access the identifier from the
module string table. Now it checks the relevant symbol iterators for any
symbol after the first received symbol, in which case the symbol is
considered ambiguous. `nkDotExpr` is also included in the whitelist of
node kinds for ambiguous type symbols (not entirely sure why this
exists, it's missing `nkAccQuoted` as well).
fixes#23406, closes#23854, closes#23855 (test code of both compiles
but separate issue exists), refs #23432, follows #23411
In generic bodies, previously all regular `nkCall` nodes like `foo(a,
b)` were directly treated as generic statements and delayed immediately,
but other call kinds like `a.foo(b)`, `foo a, b` etc underwent
typechecking before making sure they have to be delayed, as implemented
in #22029. Since the behavior for `nkCall` was slightly buggy (as in
#23406), the behavior for all call kinds is now to call `semTypeExpr`.
However the vast majority of calls in generic bodies out there are
`nkCall`, and while there isn't a difference in the expected behavior,
this exposes many issues with the implementation started in #22029 given
how much more code uses it now. The portion of these issues that CI has
caught are fixed in this PR but it's possible there are more.
1. Deref expressions, dot expressions and calls to dot expressions now
handle and propagate `tyFromExpr`. This is most of the changes in
`semexprs`.
2. For deref expressions to work in `typeof`, a new type flag
`tfNonConstExpr` is added for `tyFromExpr` that calls `semExprWithType`
with `efInTypeof` on the expression instead of `semConstExpr`. This type
flag is set for every `tyFromExpr` type of a node that `prepareNode`
encounters, so that the node itself isn't evaluated at compile time when
just trying to get the type of the node.
3. Unresolved `static` types matching `static` parameters is now treated
the same as unresolved generic types matching `typedesc` parameters in
generic type bodies, it causes a failed match which delays the call
instantiation.
4. `typedesc` parameters now reject all types containing unresolved
generic types like `seq[T]`, not just generic param types by themselves.
(using `containsGenericType`)
5. `semgnrc` now doesn't leave generic param symbols it encounters in
generic type contexts as just identifiers, and instead turns them into
symbol nodes. Normally in generic procs, this isn't a problem since the
generic param symbols will be provided again at instantiation time (and
in fact creating symbol nodes causes issues since `seminst` doesn't
actually instantiate proc body node types).
But generic types can try to be instantiated early in `sigmatch` which
will give an undeclared identifier error when the param is not provided.
Nodes in generic types (specifically in `tyFromExpr` which should be the
only use for `semGenericStmt`) undergo full generic type instantiation
with `prepareNode`, so there is no issue of these symbols remaining as
uninstantiated generic types.
6. `prepareNode` now has more logic for which nodes to avoid
instantiating.
Subscripts and subscripts turned into calls to `[]` by `semgnrc` need to
avoid instantiating the first operand, since it may be a generic body
type like `Generic` in an expression like `Generic[int]`.
Dot expressions cannot instantiate their RHS as it may be a generic proc
symbol or even an undeclared identifier for generic param fields, but
have to instantiate their LHS, so calls and subscripts need to still
instantiate their first node if it's a dot expression.
This logic still isn't perfect and needs the same level of detail as in
`semexprs` for which nodes can be left as "untyped" for overloading/dot
exprs/subscripts to handle, but should handle the majority of cases.
Also the `efDetermineType` requirement for which calls become
`tyFromExpr` is removed and as a result `efDetermineType` is entirely
unused again.
fixes#19848
Not sure why this wasn't the case already. The `if cl.allowMetaTypes:
return` line below for `tyFromExpr` [was added 10 years
ago](d5798b43de).
Hopefully it was just negligence?
fixes#8697, fixes#9620, fixes#23265
When matching a `template` with an `untyped` argument fails because of a
mismatching typed argument, `presentFailedCandidates` tries to sem every
single argument to show their types, but trying to type the `untyped`
argument can fail if it's supposed to use an injected symbol, so we get
an unrelated error message like "undeclared identifier".
Instead we use `tryExpr` as the comment suggests, setting the type to
`untyped` if it fails to compile. We could also maybe check if an
`untyped` argument is expected in its place and not try to compile the
expression if it is but this would require a bit of reorganizing the
code here and IMO it's better to have the information of what type it
would be if it can be typed.
fixes#23977
The problem is that for *any* body of a generic declaration,
[semstmts](2e4d344b43/compiler/semstmts.nim (L1610-L1611))
sets the sym of its value to the generic type name, and
[semtypes](2e4d344b43/compiler/semtypes.nim (L2143))
just directly gives the referenced type *specifically* when the
expression is a generic body. I'm blaming `semtypes` here because it's
responsible for the type given but the exact opposite behavior
specifically written in makes me think generating an alias type here
maybe breaks something.
fixes#10753, fixes#22021, refs #19365 (was fixed by #22029, but more
faithful test added)
For whatever reason `compileTime` proc calls did not fold if the proc
was generic ([since this folding was
introduced](c25ffbf262 (diff-539da3a63df08fa987f1b0c67d26cdc690753843d110b6bf0805a685eeaffd40))).
I'm guessing the intention was for *unresolved* generic procs to not
fold, which is now the logic.
Non-magic `compileTime` procs also now don't fold at compile time in
`typeof` contexts to avoid possible runtime errors (only the important)
and prevent double/needless evaluation.
fixes#23689
Normally pure enum symbols only "exist" in lookup if nothing else with
the same name is in scope. But if an expression is expected to be an
enum type, we know that ambiguity can be resolved between different
symbols based on their type, so we can include the normally inaccessible
pure enum fields in the ambiguity resolution in the case that the
expected enum type is actually a pure enum. This handles the use case in
the issue of the type inference for enums reverted in #23588.
I know pure enums are supposed to be on their way out so this might seem
excessive, but the `pure` pragma can't be removed in the code in the
issue due to a redefinition error, they have to be separated into
different modules. Normal enums can still resolve the ambiguity here
though. I always think about making a list of all the remaining use
cases for pure enums and I always forget.
Will close#23694 if CI passes
fixes#22850
The `is` operator checks the type of the left hand side, and if it's
generic or if it's a `typedesc` type with no base type, it leaves it to
be evaluated later. But `typedesc` types with no base type precisely
describe the default typeclass `type`/`typeclass`, so this condition is
removed. Maybe at some point this represented an unresolved generic
type?
fixes#22571
Removes the hack added in #13589 which made non-top-level object type
symbols `gensym` because they couldn't be mangled into different names
for codegen vs. top-level types. Now we consider the new `disamb` field
(added in #21667) of the type symbols in the type hash (which is used
for the mangled name) to differentiate between the types.
In other parts of the compiler, specifically the [proc
mangling](298ada3412/compiler/mangleutils.nim (L59)),
`itemId.item` is used instead of the `disamb` field, but I didn't use it
in case it's the outdated method.
Previous example wouldn't run unless `std/posix` was imported and it
wasn't mentioned anywhere in the docs.
Other changes in the example:
- replaced magic number with constant `MaxWatches` .
- changed seq buffer to array, because length is already constant +
pointer is a bit nicer: `addr seq[0]` vs `addr arr`
- added example for getting a `cstring` name value from `InotifyEvent`
struct with explicit cast.
- added a bit more description to `inotify_init1` (copied from `man
inotify(7)`)
---------
Co-authored-by: ringabout <43030857+ringabout@users.noreply.github.com>
Provides a fix for #23817.
With target `arm-none-eabi`, GCC defines `int32_t` to `long int`. Nim
uses `__builtin_sadd_overflow` for 32-bit targets, but this emits
warnings on GCC releases 13 and under, while generating an error on GCC
14. More info regarding this
[here](https://gcc.gnu.org/gcc-14/porting_to.html#c) and
[here](https://gcc.gnu.org/pipermail/gcc-cvs/2023-December/394351.html).
The proposed PR attempts to address this issue for these targets by
defining the `nimAddInt`, `nimSubInt`, and `nimMulInt` macros to use the
appropriate compiler intrinsics for this platform.
As for as we know, the LLVM toolchain for bare metal Arm does not define
`int32_t` as `long int` and has no need for this patch. Thus, we only
define the above macros for GCC targeting `arm-non-eabi`.
refs https://github.com/nim-lang/Nim/pull/23873#discussion_r1687995060,
fixes#23386, fixes#23385, supersedes #23572
Turns the `nfOpenSym` node flag implemented in #23091 and extended in
#23102 and #23873, into a node kind `nkOpenSym` that forms a unary node
containing either `nkSym` or `nkOpenSymChoice`. Since this affects
macros working on generic proc AST, the node kind is now only generated
when the experimental switch `genericsOpenSym` is enabled, and a new
node flag `nfDisabledOpenSym` is set to the `nkSym` or `nkOpenSymChoice`
when the switch is not enabled so that we can give a warning.
Now that the experimental switch has more reasonable semantics, we
define `nimHasGenericsOpenSym2`.
…s enabled at compile time.
#8644 This doesn't handle the case if `{.push experimental.}` is used,
but at least we can test if a feature was enabled globally.
Currently `cpuinfo.countProcessor` uses hard-coded `HW_AVAILCPU=25` for
both MacOS and BSD;
However,
[There is no HW_AVAILCPU on FreeBSD, NetBSD, and OpenBSD](
https://bugs.webkit.org/show_bug.cgi?id=132542)
Also, `HW_AVAILCPU` is undocmented in MacOS,
while `sysctlbyname("hw.logicalcpu",...)` is documented and used
by many other languages' implementations, like
[Haskell](https://gitlab.haskell.org/ghc/ghc/-/blob/master/rts/posix/OSThreads.c?ref_type=heads#L376)
---
This PR:
- use `importc` value instead of hard-coded values for `HW_*` macros.
- use "hw.logicialcpu" over undocumented HW_AVAILCPU.
- reduce 2 elements of `mib` array when calling `sysctl` as they're no
use.
actually fixes#23865 following up #23873
In the handling of `nkIdent` in `semExpr`, the compiler looks for the
closest symbol with the name and [checks the symbol
kind](6126a0bf46/compiler/semexprs.nim (L3171))
to also consider the overloads if the symbol kind is overloadable. But
it treats the normally overloadable template/macro/module sym kinds the
same as non-overloadable symbols, just calling `semSym` on it. We need
to mirror this behavior in `semOpenSym`; we treat the captured symchoice
as a fresh identifier, so if the symbol we find is a
template/macro/module, we use that symbol immediately as opposed to
waiting for overloads.
If we need keep readabilities for functions' names, we might put the
original names in the comments or in the identifiers like what currently
has been done.
The new nimble having been shipped since Nim 2.0.0 uses a directory
ending with a full hash of a commit for cloned repos, the function names
are burderen by this. This PR strips these from package paths and
prepends "pkg" for readability.
Before:
raiseNilAccess__OOZOOZOnimbleZpkgs2Zthreading450O2O045288108d1dfa34d5ade5ce4d922af51909c83cebfZthreadingZsmartptrs_u4
After:
raiseNilAccess__pkgZthreadingZsmartptrs_u4
fixes#23865
The node flag `nfOpenSym` implemented in #23091 for sym nodes is now
also implemented for open symchoices. This means the intended behavior
is still achieved when multiple overloads are in scope to be captured,
so the issue is fixed. The code for the flag is documented and moved
into a helper proc and the experimental switch is now enabled for the
compiler test suite.
follow up https://github.com/nim-lang/Nim/pull/19821
dights cannot clash with letters 'Z' and 'O'
For `threading-0.2.0-288108d1dfa34d5ade5ce4d922af51909c83cebf`
Before:
raiseNilAccess__OOZOOZOnimbleZpkgs50Zthreading4548O50O4845505656494856d49dfa5152d53ade53ce52d575050af5349574857c5651cebfZthreadingZsmartptrs_u4
After:
raiseNilAccess__OOZOOZOnimbleZpkgs2Zthreading450O2O045288108d1dfa34d5ade5ce4d922af51909c83cebfZthreadingZsmartptrs_u4
<del> nimble or something might use `git rev-parse --short HEAD` to
shorten the length of package version names ref
https://github.com/nim-lang/nimble/pull/913 </del>
Lets single threaded applications benefit from tracking foreign cells as
well.
After this, `SmallChunk` technically doesn't need to act as a linked
list anymore I think, gotta investigate that more though.
The likelihood of overflowing `chunk.free` also rises, so to work around
that it might make sense to check `foreignCells` instead of adjusting
free space or replace free with a counter for the local capacity.
For Nim compile I can observe a ~10mb reduction, and smaller ones for
other projects.
Still have to look this over some. We'll see. I put sink in this branch
simply because I saw `tyVar` there and for no other reason. In any case
the problem appears to be coming from `liftParamType` as it removes the
`sink` type from the formals.
#23869
Corrects a slicing mistake in the `std/varints` implementation which
caused it to fail when writing large numbers into buffers smaller than
10..13-bytes, now 9-byte buffers are sufficient as the documentation
states.
fixes#19819, fixes#23339
Since #22029 `tyFromExpr` does not match anything in overloading, so
generic bodies can know which call expressions to delay until the type
can be evaluated. However generic type invocations also run overloading
to check for generic constraints even in generic bodies. To prevent them
from failing early from the overload not matching, pretend that
`tyFromExpr` matches. This mirrors the behavior of the compiler in more
basic cases like:
```nim
type
Foo[T: int] = object
x: T
Bar[T] = object
y: Foo[T]
```
Unfortunately this case doesn't respect the constraint (#21181, some
other bugs) but `tyFromExpr` should easily use the same principle when
it does.
Ref: https://github.com/nim-lang/Nim/issues/23788
There was a small leak in the above issue even after fixing the
segfault. The sizes of `free` and `acc` were changed to 32bit because
adding the `foreignCells` field will drastically increase the memory
usage for programs that hold onto memory for a long time if they stay as
64bit.
fixes#23853
Since #22610 generics turns the `Name` in the `GT.Name` expression in
the test code into a sym choice. The problem is when the compiler tries
to instantiate `GT.Name` it also instantiates the sym choice symbols.
`Name` has type `template (E: type ExtensionField)` which contains the
unresolved generic type `ExtensionField`, which the compiler mistakes as
an uninstantiated node, when it's just part of the type of the template.
The compilation of the node itself and hence overloading will handle the
instantiation of the proc, so we avoid instantiating it in `semtypinst`,
similar to how the first nodes of call nodes aren't instantiated.
Honestly, to me the entire design of a (highly!) restricted set of
`FormatLiterals` characters seems antithetical to the very idea of a
format string template. Fixing that is a much larger change, though.
So, this PR just adds `'.'` so that the standard (both input & output!)
notation for decimal numbers in Nim can be used for the seconds part of
a time format in `lib/pure/times.format(.., f)`. It should only make
legal what was illegal and should be harmless since `'.'` is not used in
any special way otherwise.
fixes#23813, partially reverts #23392
Before #23392, if a `gensym` symbol was defined before a proc with the
same name in a template even with an `inject` annotation, the proc would
be `gensym`. After #23392 the proc was instead changed to be `inject` as
long as no `gensym` annotation was given. Now, to keep compatibility
with the old behavior, the behavior is changed back to infer the proc as
`gensym` when no `inject` annotation is given, however an explicit
`inject` annotation will still inject the proc. This is also documented
in the manual as the old behavior was undocumented and the new behavior
is slightly different.
code such as:
```Nim
import std/httpclient # nim c --hint:performance:on
echo newHttpClient(proxy=nil,
headers=newHttpHeaders({"Accept": "*/*"})).getContent("x")
```
(Fix was suggested by @ringabout in a private channel.)
Seems useful since `httpclient` is so basic/probably pervasive with many
hundreds of `import`s across the NimbleVerse.
fixes#3011
In https://github.com/nim-lang/Nim/pull/23532, meta fields that defined
in the object are handled.
In this PR, RefObjectTy is handled as well:
```nim
type
Type = ref object
context: ref object
```
Ref alias won't trigger mata fields checking so there won't have
cascaded errors on `TypeBase`.
```nim
type
TypeBase = object
context: ref object
Type = ref TypeBase
context: ref object
```
The most specific version of `gcd(int,int)` in `std/math` uses bitwise
comparisons from C compilers, which can't be borrowed on the js platform
in the web browser. Conditional compilation here should fix the issue
for this and downstream libraries such as `std/rationals` when compiling
to browser js as the backend.
---------
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
I've been working on making some basic cuda examples work, both with
cuda (nvcc) and with AMD HIP (hipcc) https://github.com/monofuel/hippo
- hipcc is just a drop-in replacement for clang and works out of the box
with clang settings in Nim. hipcc is capable of compiling for AMD ROCm
or to CUDA, depending on how HIP_PLATFORM is set.
- nvcc is a little quirky. we can use `-x cu` to tell it to handle nim's
`.cpp` files as if they were `.cu` files. nvcc expects all backend
compiler flags to be wrapped with a special `-Xcompiler=""` flag when
compiling and also when linking.
I manually tested on a linux desktop with amd and a laptop with nvidia.
makes new hash the default, with an opt-out (& js-no-big-int) define.
Also update changelog (& fix one typo).
Only really expect the chronos hash-order sensitive test to fail until
they merge that PR and tag a new release.
added small note regarding style insensitivity for parsing enums. the
casing of the first letter is still taken into account for this
function. was confused a little at first because when I read "style
insensitive manner" I thought it meant casing as well and ran into a
couple of `ValueError`'s because of it.
This pr redefines the relation between lambda lifting and closureiter
transformation.
Key takeaways:
- Lambdalifting now has less distinction between closureiters and
regular closures. Namely instead of lifting _all_ closureiter variables,
it lifts only those variables it would also lift for simple closure,
i.e. those not owned by the closure.
- It is now closureiter transformation's responsibility to lift all the
locals that need lifting and are not lifted by lambdalifting. So now we
lift only those locals that appear in more than one state. The rest
remains on stack, yay!
- Closureiter transformation always relies on the closure env param
created by lambdalifting. Special care taken to make lambdalifting
create it even in cases when it's "too early" to lift.
- Environments created by lambdalifting will contain `:state` only for
closureiters, whereas previously any closure env contained it.
IMO this is a more reasonable approach as it simplifies not only
lambdalifting, but transf too (e.g. freshVarsForClosureIters is now gone
for good).
I tried to organize the changes logically by commits, so it might be
easier to review this on per commit basis.
Some ugliness:
- Adding lifting to closureiters transformation I had to repeat this
matching of `return result = value` node. I tried to understand why it
is needed, but that was just another rabbit hole, so I left it for
another time. @Araq your input is welcome.
- In the last commit I've reused currently undocumented `liftLocals`
pragma for symbols so that closureiter transformation will forcefully
lift those even if they don't require lifting otherwise. This is needed
for [yasync](https://github.com/yglukhov/yasync) or else it will be very
sad.
Overall I'm quite happy with the results, I'm seeing some noticeable
code size reductions in my projects. Heavy closureiter/async users,
please give it a go.
(for `string` or any other key type). Independence is nice to ever
change orders. So, change it to just `len` & a `doAssert` like the other
test in the same file.
Using initOptParser with an empty cmdline (so that it gets the cmdline
from the command line) in nimscripts does not yield the expected
results.
Fixes#23774.
After this pr, for a string with just 20 length and 6 `'\t'`, the time reduces by about 1.5%[^t].
Also, the code is clearer than the previous at some places.
[^t]: Generally speaking, this rate increases with length. I may test
for longer string later.
```
$ curl -v http://example.com/404 |& grep 'HTTP/1.1'
> GET /404 HTTP/1.1
< HTTP/1.1 500 Internal Server Error
```
So, the test with http://example.com/404 should be disabled, I think.
fixes#23749, refs #22716
`semIndirectOp` is used here because of the callback expressions, in
this case `db.getProc(...)`, and `semIndirectOp` calls `semOpAux` to
type its arguments before overloading starts. Hence it can opt in to
symchoices since overloading will resolve them.
This fixes crashes in some specific network configurations (as
`cstringArrayToSeq` is used extensively in `nativesockets`).
---------
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
fixes#23742
Before my PR, `setLen(0)` doesn't free buffer if `s != nil`, but it
allocated unnecessary memory for `strs`. This PR rectifies this
behavior. `setLen(0)` no longer allocates memory for uninitialized
strs/seqs
Unlike present Nim this actually fills `Hash` for `string` & related.
For the curious, note that `hashData` remains the aboriginal Nim string
hasher & `import hashes {.all.}` allows simultaneous test/time of {orig,
murmur, farm} on your favorite CPU & back end compiler.
Update tests also conditioned upon `nimPreviewHashFarm` so they should
pass either with or without that `define` on.
In `--jsbigint=on` mode, only the lower 32-bits of `Hash` match nimvm &
run-time values because `type Hash = int` and on JS int=int32, not int64
as for 64-bit Nim platforms. Due to the matching, `const` Table should
match run-time `Table` on all platforms.
To operate in `--jsbigint=off` mode is feasible but needs much "double
precision mul/xor/ror/shr-arithmetic"-style work. That is distracting &
also of questionable value since JS added BigInt in 2018, ringabout
added Nim support for it in 2021 & `nimPreviewHashFarm` is unlikely to
swap from an opt-in to an opt-out default before 2025..2026 which will
have given a backward looking time window of 7..8 years for deployment
platforms - reasonably generous.
Add a changelog entry for 2.2.
fixes#23730
Since #23188 the compiler errors when matching a type variable to an
uninstantiated static value. However sometimes an uninstantiated static
value is given even when only a type match is being performed to the
base type of the static type, in the given issue this case is:
```nim
proc foo[T: SomeInteger](x: T): int = int(x)
proc bar(x: static int): array[foo(x), int] = discard
discard bar(123)
```
To deal with this issue we only error when matching against a type
variable constrained to `static`.
Not sure if the `q.typ.kind == tyGenericParam and
q.typ.genericConstraint == tyStatic` check is necessary, the code above
for deciding whether the variable becomes `skConst` doesn't use it.
fixes#17247
This generates a new NIM_STATIC_ASSERT_AUX variable for each line that
NIM_STATIC_ASSERT is called from.
While this can solve all existing issues in the current code base, this
method is not effective for multiple asserts on a single line.
ref #20653
```nim
Error* = object
case kind*: ErrorType
of ErrorA:
discard
of ErrorB:
discard
```
For an object variants without fields, it shouldn't generate empty
brackets for default values since there are no fields at all in case
branches.
Fix non-exported `setFileSize` to take optional `oldSize` to (on posix)
shrink differently than it grows (`ftruncate` not `posix_fallocate`)
since it makes sense to assume the higher address space has already been
allocated there and include the old file size in the `proc resize` call.
Also, do not even try `setFileSize` in the first place unless the `open`
itself works by moving the call into the `if newFileSize != -1` branch.
Just cosmetics, also improve some old 2011 comments, note a logic diff
for callers using both `mappedSize` & `newFileSize` from windows branch
in case someone wants to fix that & simplify code formatting a little.
fixes#23513
Also, the old `runnableExample` is just a copy of `proc
parseInt(openArray[char], var int, int)` variant (in Line 1000).
---------
Co-authored-by: ringabout <43030857+ringabout@users.noreply.github.com>
fixes#23690
```nim
dest.`:state` = src.`:state`
var :tmp_553651276 = dest.e1.a
`=wasMoved`(dest.e1.a)
dest.e1.a.kind = src.e1.a.kind
case dest.e1.a.kind
of 0:
dest.e1.a.a = src.e1.a.a
of 1:
`=copy`(dest.e1.a.c, src.e1.a.c)
case :tmp_553651276.kind
of 0:
of 1:
`=destroy`(:tmp_553651276.c)
```
`dest.e1.a.kind = src.e1.a.kind` changes the discrimant but it fails to
clear the memory of `dest.e1.a`. Before using hooks for copying, we need
to clear the dest, e.g. `=wasMoved(dest.e1.a.c)`.
```nim
dest.`:state` = src.`:state`
var :tmp_553651276 = dest.e1.a
`=wasMoved`(dest.e1.a)
dest.e1.a.kind = src.e1.a.kind
case dest.e1.a.kind
of 0:
`=wasMoved`(dest.e1.a.a)
dest.e1.a.a = src.e1.a.a
`=wasMoved`(dest.e1.a.b)
of 1:
`=wasMoved`(dest.e1.a.c)
`=copy`(dest.e1.a.c, src.e1.a.c)
case :tmp_553651276.kind
of 0:
of 1:
`=destroy`(:tmp_553651276.c)
```
fixes#10440, fixes#13871, fixes#14665, fixes#19672, fixes#23677
The false positive in #23677 was caused by behavior in
`implicitlyDiscardable` where only the last node of `if`/`case`/`try`
etc expressions were considered, as in the final node of the final
branch (in this case `else`). To fix this we use the same iteration in
`implicitlyDiscardable` that we use in `endsInNoReturn`, with the
difference that for an `if`/`case`/`try` statement to be implicitly
discardable, all of its branches must be implicitly discardable.
`noreturn` calls are also considered implicitly discardable for this
reason, otherwise stuff like `if true: discardableCall() else: error()`
doesn't compile.
However `endsInNoReturn` also had bugs, one where `finally` was
considered in noreturn checking when it shouldn't, another where only
`nkIfStmt` was checked and not `nkIfExpr`, and the node given for the
error message was bad. So `endsInNoReturn` now skips over
`skipForDiscardable` which no longer contains
`nkIfStmt`/`nkCaseStmt`/`nkTryStmt`, stores the first encountered
returning node in a var parameter for the error message, and handles
`finally` and `nkIfExpr`.
Fixing #23677 already broke a line in `syncio` so some package code
might be affected.
Because of the bug in `tools/parse_unicodedata.nim`, CJK Ideographs were
not considered letters in `isAlpha()`, even though they have category
Lo. This is because they are specified as range in `UnicodeData.txt`,
not as separate characters:
```
4E00;<CJK Ideograph, First>;Lo;0;L;;;;;N;;;;;
9FEF;<CJK Ideograph, Last>;Lo;0;L;;;;;N;;;;;
```
The parser was not prepared to parse such ranges and thus omitted almost
all CJK Ideographs from consideration.
To fix this, we need to consider ranges from `UnicodeData.txt` in
`tools/parse_unicodedata.nim`.
... by moving the Google font includes near the top of the head. By
including them as early as possible, they are known, when the browser
starts rendering the body.
Test it by making the change manually in `doc/html/system.html` and then
press ctrl+f5 (reload without cache). This removes the font flashing.
Tested in Chrome and Firefox.
fixes#23627
```nim
type
TestObj = object of RootObj
TestTestObj = object of RootObj
testo: TestObj
proc `=destroy`(x: TestTestObj) =
echo "Destructor for TestTestObj"
proc testCaseT() =
echo "\nTest Case T"
let tt1 {.used.} = TestTestObj(testo: TestObj())
```
When generating const object fields, it's likely that
we need to generate type infos for the object, which may be an object
with
custom hooks. We need to generate potential consts in the hooks first.
https://github.com/nim-lang/Nim/pull/20433 changed the semantics of
initialization. It should evaluate`BracedInit` first.
fixes#23596
When importing a module and declaring an overloadable symbol with the
same name as the module in the same scope, the module symbol can take
over and make the declared overload impossible to access. Previously
enum overloading had a quirk that bypassed this in a context where a
specific enum type was expected but this was removed in #23588. Now this
is bypassed in every place where a specific type is expected since
module symbols don't have a type and so wouldn't be compatible anyway.
But the issue still exists in places where no type is expected like `let
x = modulename`. I don't see a way of fixing this without nerfing module
symbols to the point where they're not accessible by default, which
might break some macro code.
refs
https://github.com/nim-lang/Nim/issues/23586#issuecomment-2102113750
In #20091 a bad kind of type inference was mistakenly left in where if
an identifier `abc` had an expected type of an enum type `Enum`, and
`Enum` had a member called `abc`, the identifier would change to be that
enum member. This causes bugs where a local symbol can have the same
name as an enum member but have a different value. I had assumed this
behavior was removed since but it wasn't, and CI seems to pass having it
removed.
A separate PR needs to be made for the 2.0 branch because these lines
were moved around during a refactoring in #23123 which is not in 2.0.
This adds a version of `almostEqual` (which was already available for
floats) thata works with `Complex[SomeFloat]`.
Proof that this is needed is that the first thing that the complex.nim
runnable examples block did before this commit was define (an
incomplete) `almostEqual` function that worked with complex values.
fixes#23568, fixes#23310
In #23091 `semFinishOperands` was changed to not be called for `mArrGet`
and `mArrPut`, presumably in preparation for #23188 (not sure why it was
needed in #23091, maybe they got mixed together), since the compiler
handles these later and needs the first argument to not be completely
"typed" since brackets can serve as explicit generic instantiations in
which case the first argument would have to be an unresolved generic
proc (not accepted by `finishOperand`).
In this PR we just make it so `mArrGet` and `mArrPut` specifically skip
calling `finishOperand` on the first argument. This way the generic
arguments in the explicit instantiation get typed, but not the
unresolved generic proc.
## Bug
Fixes https://github.com/nim-lang/Nim/issues/12381 - HttpClient socket
handle leak
To replicate the bug, run the following code in a loop:
```nim
import httpclient
while true:
echo "New loop"
var client = newHttpClient(timeout = 1000)
try:
let response = client.request("http://10.44.0.4/bla", httpMethod = HttpPost, body = "boo")
echo "HTTP " & $response.status
except CatchableError as e:
echo "Error sending logs: " & $e.msg
finally:
echo "Finally"
client.close()
```
Note the IP address as the hostname. I'm directly connecting to a
plausible local IP, but one that does not resolve, as I have everything
under 10.4.x.x.
The output looks like this to me:
```
New loop
Error sending logs: Operation timed out
Finally
New loop
Error sending logs: Operation timed out
Finally
New loop
...
```
In Nim 2.0.4, running the code above leaks the socket:
<img width="944" alt="Screenshot 2024-05-05 at 22 00 13"
src="https://github.com/nim-lang/Nim/assets/53387/ddac67db-d7df-45e6-b7a5-3d42f79775ea">
## Fix
With the added line of code, each old socket is cleanly removed:
<img width="938" alt="Screenshot 2024-05-05 at 21 54 18"
src="https://github.com/nim-lang/Nim/assets/53387/5b0b4b2d-d4f0-4e74-a9cf-74aec0c50d2e">
I believe the line below, `closeUnusedFds(ord(domain))` was supposed to
clean up the failed connection attempts, but it failed to do so for the
last one, assuming it succeeded. Yet it didn't. This fix makes sure
failed connections are closed immediately.
## Tests
I don't have a test with this PR. When testing locally, the
`connect(lastFd, ..)` call on line 2032 blocks for ~75 seconds, ignoring
the http timeout. I fear any test I could add would either 1) take way
too long, 2) one day run in an environment where my randomly chosen IP
is real, yielding in weird flakes.
The only bug i can imagine is if running `lastFd.close()` twice is a bad
idea. I tested by actually running it twice, and... no crash/op? So
seems safe? I'm hoping the CI run will be green, and this will be
enough. However I'm happy to take feedback on how I should test this,
and do the necessary changes.
~Edit: looks like a test does fail, so moving to a draft while I figure
this out.~ Attempt 2 fixed it.
`reset`, `wasMoved` and `move` doesn't support primitive types, which
generate `null` for these types. It is now produce `x = default(...)` in
the backend. Ideally it should be done by ast2ir in the future
fixes#23419
`void` is only supported as fields of objects/tuples. It shouldn't allow
void in the array.
I didn't merge it with taField because that flag is also used for
tyLent, which is allowed in the fields of other types.
fixes#23321
In the function `mapType`, ptrs (tyPtr, tyVar, tyLent, tyRef)
are mapped into ctPtrToArray, the dereference of which is skipped
in the `genref`. We need to skip these ptrs in the function
`genOpenArraySlice`.
…instantiations (C/C++ backend)
AFAIK, #22802 expanded `noinit`'s utility by allowing the pragma to be
attached to types (thanks @jmgomez !).
I suggest broadening the scope a bit further: try to avoid `nimZeroMem`s
on a type level beyond imported C/C++ types[^1], saving us from
annotating the type instantiations with `noinit`.
If this change is deemed acceptable, I will also adjust the docs, of
course.
Adding tests for this change seems a bit problematic, as the effect of
this type annotation will be to work with uninitialized memory, which
*might* match 0 patterns.
[^1]: "complex value types" as already defined here:
94c5996877/compiler/cgen.nim (L470-L471)
When forward declaration is used with pragmas `virtual` or `member`, the
declaration in struct is added twice. It happens because of missing
check for `sfWasForwarded` pragma.
Current compiler generates the following C++ code:
```cpp
struct tyObject_Foo__fFO9b6HU7kRnKB9aJA1RApKw {
N_LIB_PRIVATE N_NOCONV(void, abc)(NI x_p1);
N_LIB_PRIVATE N_NOCONV(virtual void, def)(NI y_p1);
N_LIB_PRIVATE N_NOCONV(void, abc)(NI x_p1);
N_LIB_PRIVATE N_NOCONV(virtual void, def)(NI y_p1);
};
```
fixes#4695
ref https://github.com/nim-lang/Nim/pull/15818
Since `nkState` is only for the main loop state labels and `nkGotoState`
is used only for dispatching the `:state` (since
https://github.com/nim-lang/Nim/pull/7770), it's feasible to rewrite the
loop body into a single case-based dispatcher, which enables support for
JS, VM backend. `nkState` Node is replaced by a label and Node pair and
`nkGotoState` is only used for intermediary processing. Backends only
need to implement `nkBreakState` and `closureIterSetupExc` to support
closure iterators.
pending https://github.com/nim-lang/Nim/pull/23484
<del> I also observed some performance boost for C backend in the
release mode (not in the danger mode though, I suppose the old
implementation is optimized into computed goto in the danger mode)
</del>
allPathsAsgnResult???
Because `isGitRepo()` call requires `/bin/sh` it will always fail when
building Nim in a Nix build sandbox, and the check doesn't even make
sense if Nix already provides Nimble source code.
Since for Nimble `allowBundled` is set to `true` this effectlvely does
not change behavior for normal builds, but does avoid ugly hacks when
building in Nix which lacks `/bin/sh` and fails to call `git`.
Reference:
*
https://github.com/status-im/nimbus-eth2/pull/6180#discussion_r1570237858
Signed-off-by: Jakub Sokołowski <jakub@status.im>
fixes#23499
In the
8990626ca9
the effect of `skipAddr` changed to skip `nkAddr` and `nkHiddenAddr`.
Some old code was not adapted. In the
https://github.com/nim-lang/Nim/pull/23477, the magic `addr` function
was handled in the semantic analysis phase, which causes it be skipped
incorrectly
Added a second example inside the `typedthreads` file.
Also, add a more detailed introduction. When Nim is one's first
programming language, a short explanation of what a thread is might not
hurt.
For reference, the thread documentation of other languages looks like
this:
- https://en.cppreference.com/w/cpp/thread/thread
- https://doc.rust-lang.org/std/thread/
The documentation of a module is the first place one will look when
using a standard library feature, so I think it is important to have a
few usable examples for the main modules.
This is the example added
```nim
import locks
var l: Lock
proc threadFunc(obj: ptr seq[int]) {.thread.} =
withLock l:
for i in 0..<100:
obj[].add(obj[].len * obj[].len)
proc threadHandler() =
var thr: array[0..4, Thread[ptr seq[int]]]
var s = newSeq[int]()
for i in 0..high(thr):
createThread(thr[i], threadFunc, s.addr)
joinThreads(thr)
echo s
initLock(l)
threadHandler()
deinitLock(l)
```
Sharing memory between threads is very very common, so I think having an
example showcasing this is crucial.
---------
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
fixes#23326
In a routine declaration node in a template, if the routine is marked as
`gensym`, the compiler adds it as a new symbol to a preliminary scope of
the template. If it's not marked as gensym, then it searches the
preliminary scope of the template for the name of the routine, then when
it matches a template parameter or a gensym identifier, the compiler
replaces the name node with a symbol node of the found symbol.
This makes sense for the template parameter since it has to be replaced
later, but not really for the gensym identifier, as it doesn't allow us
to inject a routine with the same name as an identifier previously
declared as gensym (the problem in #23326 is when this is in another
`when` branch).
However this is the only channel to reuse a gensym symbol in a
declaration, so maybe removing it has side effects. For example if we
have:
```nim
proc foo(x: int) {.gensym.} = discard
proc foo(x: float) {.gensym.} = discard
```
it will not behave the same as
```nim
proc foo(x: int) {.gensym.} = discard
proc foo(x: float) = discard
```
behaved previously, which maybe allowed overloading over the gensym'd
symbols.
A note to the "undeclared identifier" error message has also been added
for a potential error code that implicitly depended on the old behavior
might give, namely ``undeclared identifier: 'abc`gensym123'``, which
happens when in a template an identifier is first declared gensym in
code that doesn't compile, then as a routine which injects by default,
then the identifier is used.
the function name extension encoded by paths could be useful for
debugging where the function is from
Before:
```js
function newSeq_33556909(len_33556911)
```
After:
```js
function newSeq__system_u2477(len_p0)
```
fixes#16771
follow up https://github.com/nim-lang/Nim/pull/16536
Ideally it should be handled in the IR part in the future
I have also checked the double evaluation of `swap` in the JS runtime
https://github.com/nim-lang/Nim/issues/16779, that might be solved by a
copy flag or something. Well, it should be best solved in the IR so that
it doesn't bother backends anymore.
## Reprodution
if on Windows:
```Nim
when defined(windows):
var file: File
let succ = file.open(<aFileHandle>)
```
then `succ` will be false.
If tested, it can be found to fail with errno `22` and message: `Invalid
argument`
## Problem
After some investigations and tests,
I found it's due to the `mode` argument for `fdopen`.
Currently `NoInheritFlag`(`'N'` in Windows) is added to `mode` arg
passed to `_fdopen`, but if referring to
[Windows `_fdopen`
doc](https://learn.microsoft.com/en-us/cpp/c-runtime-library/reference/fdopen-wfdopen?view=msvc-170),
you'll find there is no `'N'` describled. That's `'N'` is not accepted
by `_fdopen`.
Therefore, the demo above will fail.
## In Addition
To begin with, technologically speaking, when opening with a
`fileHandle`(or called `fd`), there is no concept of fd-inheritable as
`fd` is opened already.
In POSIX, `NoInheritFlag` is defined as `e`.
It's pointed out in [POSIX `open`
man-doc](https://www.man7.org/linux/man-pages/man3/fopen.3.html) that
`e` in mode is ignored for fdopen(),
which means `e` for `fdopen()` is not wanted, just allowed.
Therefore, better to also not pass `e` to `fdopen`
---
In all, that's this PR.
This fixes a nimsuggest crash when opening:
beacon_chain/consensus_object_pools/blockchain_dag.nim
from the nimbus-eth2 project and many other .nim files (44 files, to be
precise) in the same project.
Replaces: https://github.com/nim-lang/Nim/pull/23402
Fixes an issue that comes up when using strutils.`%` or any other
strutils/strformat feature that uses the unicode lookup tables behind
the scenes, on systems where ints are than 32-bit wide.
Tested with:
```bash
./koch test cat lib
```
Refer to the discussion in #23125.
The fix to the atomicArc looks to use `-1` as the check value from the
`SharedPtr` solution. However, it should be `-rcIncrement` since the
refcount is bit shifted in ARC/ORC.
I discovered this playing around doing atomic updates of refcounts in a
user library.
Related to https://github.com/nim-lang/Nim/issues/22711
@ringabout I believe you ported the sharedptr fix?
# Description
When using `--hintAsError`, we want some red color to appear in the
logs.
Same is already done for `warningAsError`.
# Cherry-picking to Nim 1.6
Would be nice to cherry-pick this and the `warningAsError` log highlight
to 1.6 branch, as it's used in status-desktop.
This adds nimsuggest support for displaying inlay hints for exceptions.
An inlay hint is displayed around function calls, that can raise an
exception, which isn't handled in the current subroutine (in other
words, exceptions that can propagate back to the caller). On mouse hover
on top of the hint, a list of exceptions that could propagate is shown.
The changes, required to support this are already commited to
nimlangserver and the VS code extension. The extension and the server
allow configuration for whether these new exception hints are enabled
(they can be enabled or disabled independently from the type hints), as
well as the inlay strings that are inserted before and after the name of
the function, around the function call. Potentially, one of these
strings can be empty, for example, the user can choose to add an inlay
hint only before the name of the function, or only after the name of the
function.
fix#23381
As for the read function, the original plan was to use lent for
annotation, but after my experiments, it still produced copies, so I had
to move it out.
Now the `read` function cannot be called repeatedly
fixes#23399
The new case introduced in #21657 is triggered by `efWantStmt` but the
`when` statement doesn't normally propagate this flag, so propagate it
when the `semCheck` param in `semWhen` is true which happens when the
`when` statement is `efWhenStmt` anyway.
fixes#22284fixes#22282
```
Error: j(uRef, proc (config: F; sources: auto) {.raises: [].} = discard ) can raise an unlisted exception: Exception
```
The problem is that `n.typ.n` contains the effectList which shouldn't
appear in the parameter of a function defintion. We could not simply use
`n.typ.n` as `n[paramsPos]`. The effect lists should be stripped away
anyway.
When target is nodejs,
`isAbsolute` used to only check in the POSIX flavor,
i.e. for js backend on Windows,
```nim
isAbsolute(r"C:\Windows") == false
```
This fixes it.
For this
[proc](773c066634/lib/pure/browsers.nim (L83))
`proc openDefaultBrowser*() {.since: (1, 1).}`:
though it's documented to open default browser with `about:blank` page,
it behaves differently:
- On Windows, it failed and open no window
- On Linux(Debian with Kde), it opens not default browser but
`Konqueror`
I have paid much effort to implement this variant, but even the
implementation on Windows is considerably complex.
In short, it's not only hard but unworthy to fix this.
Just as Araq
[said](https://github.com/nim-lang/Nim/issues/22250#issuecomment-1631360617),
we shall remove the `proc openDefaultBrowser*() {.since: (1, 1).}`
variant
---------
Co-authored-by: ringabout <43030857+ringabout@users.noreply.github.com>
Currently, I don't have syntax highlighting (+ no/wrong
jump-to-definition) for some import statement forms, namely:
- `import module/name/with/(slashes)`
- `import (mod) as alias`
- `import basemod/[ (sub1), (sub2) ]`
With this patch, highlight/def will work for the regions indicated by
parentheses.
ref #23354
The new move analyzer requires types that have the tfAsgn flag
(otherwise `lastRead` will return true); tfAsgn is included when the
destructor is not trival. But it should consider the assignement for
objects in this case because objects might have a trival destructors but
it's the assignement that matters when it is passed to sink parameters.
This is just one of those tiny steps towards the goal of an "optimized"
C and C++ codegen I raised elsewhere before - what does me babbling
"optimized" mainly entail?
(not mutually-exclusive ascertainment proposals following:)
- less and simplified resulting code: easier to pick up/grasp for the
C/C++ compiler for to do its own optimization heuristics, less parsing
effort for us mere humans trying to debug, especially in the case of
interop
- build time reduction: less code emission I/O, runtime string
formatting for output...
- easier access for fresh contributors and better maintainability
- interop improvements
- further runtime optimizations
I am eagerly looking forward to the results of the LLVM-based
undertakings, but I also think we can do a bit better (as outlined
above) with our current C/C++ backends till those come to fruition.
**Long story short**: this PR here focuses on the C++ backend,
augmenting the current codegen method of establishing "temporary"
variables by using C++11's auto type deduction. The reasons for adopting
an "Almost Always Auto" style have been collected [here
](https://herbsutter.com/2013/08/12/gotw-94-solution-aaa-style-almost-always-auto/)
for the C++ world. For those hopping between C++'s and Nim's realms,
this change also results in a bit less code and less work for the
codegen part (no redundant `getTypeDesc`s): no need to tell the C++
compiler the type it already knows of (in most cases).
This also prevents unwanted `raises: [ValueError]` effects from bubbling
up from correct format strings which makes `fmt` broadly unusable with
`raises`.
The old runtime-based `formatValue` overloads are kept for
backwards-compatibility, should anyone be using runtime format strings.
---------
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
This fixes an oversight with a change that I made a while ago.
Basically, these two snippets should both compile. Currently the
`varargs` version will fail.
```nim
template s(d: typed)=discard
proc something()=discard
proc something(x:int)=discard
s(something)
```
```nim
template s(d: varargs[typed])=discard
proc something()=discard
proc something(x:int)=discard
s(something)
```
Potentially unrelated, but this works currently for some reason:
```nim
template s(a: varargs[typed])=discard
proc something()=discard
proc something(x:int)=discard
s:
something
```
also, this works:
```nim
template s(b:untyped, a: varargs[typed])=discard
proc something()=discard
proc something(x:int)=discard
s (g: int):
something
```
but this doesn't, and the error message is not what I would expect:
```nim
template s(b:untyped, a: varargs[typed])=discard
proc something()=discard
proc something(x:int)=discard
s (g: int), something
```
So far as I can tell, none of these issues persist for me after the code
changes in this PR.
The following would crash nimsuggest on init:
```nim
import chronos
type
HistoryQuery = object
start: int
limit: int
HistoryResult = object
messages: string
type HistoryQueryHandler* = proc(req: HistoryQuery): Future[HistoryResult] {.async, gcsafe.}
```
…hich conveys effects beyond its module scope for C/C++
codegen(suppresses current UnusedImport warning)
Just a minor inconvenience working in the area of C/C++ integration I
guess, but here we go:
I noticed receiving ```UnusedImport``` warnings for modules having only
```passC```/```passL```/```compile``` pragmas around. I gather the
compiler cannot actually infer those modules being unused as they *may*
have consequences for the whole build process (as they did in my simple
case).
Thus, I hereby suggest adding the `sfUsed` flag to the respective module
in order to suppress the compiler's warning.
I reckon other pragmas should be put into consideration as well: I will
keep up the investigation with PR followups.
It seems Deque doesn't need `mask` field because `data.len - 1` equals
to `mask`.
Deque without `mask` field passes test `tests/stdlib/tdeques.nim`.
---------
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
The doc for `getCurrentCompilerExe` was originally added at [this
commit](c4e3c4ca2d),
saying "`getAppFilename` at CT", and modified as "This is
`getAppFilename()`_ at compile time..." since
[this](0c2c2dca2a (diff-8ed10106605d9e0e3f28a927432acd8312e96791c96dbb126a52a7010cf4b44a))
Which means "at compile time, get result innerly from Nim compiler via
`getAppFilename`", not "get from nim programs".
Thus, the doc was confusing, only mentioning `compile time` and
`getAppFilename`
---------
Co-authored-by: ringabout <43030857+ringabout@users.noreply.github.com>
fixes#22909
required by https://github.com/nim-lang/Nim/pull/23267
```nim
proc foo: string =
assert false
result = ""
```
In the function `foo`, `assert false` raises an exception, which can
cause `result` to be uninitialized if the default result initialization
is optimized out
This PR speeds up complex.pow when both base and exponent are real; when
only the exponent is real; and when the base is Euler's number. These
are some pretty common cases which appear in many formulas. The speed
ups are pretty significant. According to my measurements (using the
timeit library) when both base and exponent are real the speedup is ~2x;
when only the exponent is real it is ~1.5x and when the base is Euler's
number it is ~2x.
There is no measurable difference when using other exponents which makes
sense since I refactored the code a little to reduce the total number of
branches that are needed to get to the final "fallback" branch, and
those branches have less comparisons. Anecdotally the fallback case
feels slightly faster, but the improvement is so small that I cannot
claim an improvement. If it is there it is perhaps in the order of 3 or
4%.
---------
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
In doc, there are 4 references for `getAppFilename`
`getAppFilename` is still in `os`, but the references refer it as if
it's in the current module `cmdline`
fixes#23247closes#23251 (which accounts for why the openarray type is lifted
because ops are lifted for openarray conversions)
related: https://github.com/nim-lang/Nim/pull/18713
It seems to me that openarray doesn't own the data, so it cannot destroy
itself. The same case should be applied to
https://github.com/nim-lang/Nim/issues/19435. It shouldn't be destroyed
even openarray can have a destructor. A cleanup will be followed for
https://github.com/nim-lang/Nim/pull/19723 if it makes sense.
According to https://github.com/nim-lang/Nim/pull/12073, it lifts
destructor for openarray when openarray is sunk into the function, when
means `sink openarray` owns the data and needs to destroy it. In other
cases, destructor shouldn't be lifted for `openarray` in the first place
and it shouldn't destroy the data if it doesn't own it.
---------
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
fixes#22597
```nim
proc autoToOpenArray*[T](s: Slice[T]): openArray[T] =
echo "here twice"
result = toOpenArray(s.p, s.first, s.last)
```
For functions returning openarray types, `fixupCall` creates a temporary
variable to store the return value: `let tmp = autoToOpenArray()`. But
`genOpenArrayConv` cannot handle openarray assignements with side
effects. It should have stored the right part of the assignment first
instead of calling the right part twice.
The documentation links for `parentDir()` and `getCurrentDir()` are
broken as they are no longer part of `std/os`. Link changed to
`std/private/ospaths2`.
This PR speeds up the calculation of the power of a complex number when
the exponent is 2.0 or 0.5 (i.e the square and the square root of a
complex number). These are probably two of (if not) the most common
exponents. The speed up that is achieved according to my measurements
(using the timeit library) when the exponent is set to 2.0 or 0.5 is >
x7, while there is no measurable difference when using other exponents.
For the record, this is the function I used to mesure the performance:
```nim
import std/complex
import timeit
proc calculcatePows(v: seq[Complex], factor: Complex): seq[Complex] {.noinit, discardable.} =
result = newSeq[Complex](v.len)
for n in 0 ..< v.len:
result[n] = pow(v[n], factor)
let v: seq[Complex64] = collect:
for n in 0 ..< 1000:
complex(float(n))
echo timeGo(calculcatePows(v, complex(1.5)))
echo timeGo(calculcatePows(v, complex(0.5)))
echo timeGo(calculcatePows(v, complex(2.0)))
```
Which with the original code got:
> [177μs 857.03ns] ± [1μs 234.85ns] per loop (mean ± std. dev. of 7
runs, 1000 loops each)
> [128μs 217.92ns] ± [1μs 630.93ns] per loop (mean ± std. dev. of 7
runs, 1000 loops each)
> [136μs 220.16ns] ± [3μs 475.56ns] per loop (mean ± std. dev. of 7
runs, 1000 loops each)
While with the improved code got:
> [176μs 884.30ns] ± [1μs 307.30ns] per loop (mean ± std. dev. of 7
runs, 1000 loops each)
> [23μs 160.79ns] ± [340.18ns] per loop (mean ± std. dev. of 7 runs,
10000 loops each)
> [19μs 93.29ns] ± [1μs 128.92ns] per loop (mean ± std. dev. of 7 runs,
10000 loops each)
That is, the new optimized path is 5.6 (23 vs 128 us per loop) to 7.16
times faster (19 vs 136 us per loop), while the non-optimized path takes
the same time as the original code.
Makes docs default to using browser settings instead of light mode
This should fix#16515 since it doesn't require the browser to run the
JS to set the default
Also means that dark mode can be used without JS if the browser is
configured to default to dark mode
fixes#18125
Previously a tuple type like `(T, int)` would match an expected tuple
type `(U, int)` if `T` is a subtype of `U`. This is wrong since the
codegen does not handle type conversions of individual tuple elements in
a type conversion of an entire tuple. For this reason the compiler
already does not accept `(float, int)` for a matched type `(int, int)`,
however the code that checked for which relations are unacceptable
checked for `< isSubtype` rather than `<= isSubtype`, so subtypes were
not included in the unacceptable relations.
Update: Now only considered unacceptable when inheritance is used, as in
[`paramTypesMatch`](3379d26629/compiler/sigmatch.nim (L2252-L2254)).
Ideally subtype relations that don't need conversions, like `nil`,
`seq[empty]`, `range[0..5]` etc would be their own relation
`isConcreteSubtype` (which would also allow us to differentiate with
`openArray[T]`), but this is too big of a refactor for now.
To compensate for this making things like `let x: (Parent, int) =
(Child(), 0)` not compile (they would crash codegen before anyway but
should still work in principle), type inference for tuple constructors
is updated such that they call `fitNode` on the fields and their
expected types, so a type conversion is generated for the individual
subtype element.
fixes#17163, refs #23204
Types that aren't `tyRange` and are bigger than 16 bits, so `int32`,
`uint64`, `int` etc, are disallowed as array index range types.
`tyRange` is excluded because the max array size is backend independent
(except for the specific size of `high(uint64)` which crashes the
compiler) and so there should still be an escape hatch for people who
want bigger arrays.
This PR modifies `specializeResetT` so that it generates the proper
reset code for range types. I've tested it in the examples for issues
#23214 and #22462 as well as our codebase, and it seems to fix the
issues I had been experiencing.
fixes#23200, fixes#18866#21065 made it so `auto` proc return types remained as `tyAnything` and
not turned to `tyUntyped`. This had the side effect that anything
previously bound to `tyAnything` in the proc type match was then bound
to the proc return type, which is wrong since we don't know the proc
return type even if we know the expected parameter types (`tyUntyped`
also [does not care about its previous bindings in
`typeRel`](ab4278d217/compiler/sigmatch.nim (L1059-L1061))
maybe for this reason).
Now we mark `tyAnything` return types for routines as `tfRetType` [as
done for other meta return
types](18b5fb256d/compiler/semtypes.nim (L1451)),
and ignore bindings to `tyAnything` + `tfRetType` types in `semtypinst`.
On top of this, we reset the type relation in `paramTypesMatch` only
after creating the instantiation (instead of trusting
`isInferred`/`isInferredConvertible` before creating the instantiation),
using the same mechanism that `isBothMetaConvertible` uses.
This fixes the issues as well as making the disabled t15386_2 test
introduced in #21065 work. As seen in the changes for the other tests,
the error messages give an obscure `proc (a: GenericParam): auto` now,
but it does give the correct error that the overload doesn't match
instead of matching the overload pre-emptively and expecting a specific
return type.
tsugar had to be changed due to #16906, which is the problem where
`void` is not inferred in the case where `result` was never touched.
fixes#23186
As explained in #23186, generics can transform `genericProc[int]` into a
call `` `[]`(genericProc, int) `` which causes a problem when
`genericProc` is resemmed, since it is not a resolved generic proc. `[]`
needs unresolved generic procs since `mArrGet` also handles explicit
generic instantiations, so delay the resolved generic proc check to
`semFinishOperands` which is intentionally not called for `mArrGet`.
The root issue for
[t6137](https://github.com/nim-lang/Nim/blob/devel/tests/generics/t6137.nim)
is also fixed (because this change breaks it otherwise), the compiler
doesn't consider the possibility that an assigned generic param can be
an unresolved static value (note the line `if t.kind == tyStatic: s.ast
= t.n` below the change in sigmatch), now it properly errors that it
couldn't instantiate it as it would for a type param. ~~The change in
semtypinst is just for symmetry with the code above it which also gives
a `cannot instantiate` error, it may or may not be necessary/correct.~~
Now removed, I don't think it was correct.
Still possible that this has unintended consequences.
Nim manual says:
> When using the Cpp backend, params marked as byref will translate to
cpp references `&`
But how `byref` pragma translate to depends on whether it is used with
`importc` or `importcpp`.
When `byref` pragma used with `importc` types and compiled with the Cpp
backend, it is not traslated to cpp reference `&`.
---------
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
- Clarified the implications of order of operation.
- Mentioned overlapping isn't handled
- Added the runnableExamples block
Fixes#23160, which supposedly should have been fixed in an earlier PR
#23022, but the wording was still not clear enough to my liking, which
the raised issue kind of confirms.
fixes#23177
`changeType` doesn't perform range checks to see if the expression fits
the new type [if the old type is the same as the new
type](62d8ca4306/compiler/semexprs.nim (L633)).
For `nkIntLit`, we previously set the type to the concrete base of the
expected type first, then call `changeType`, which works for things like
range types but not bare types of smaller bit size like `int8`. Now we
don't set the type (so the type is nil), and `changeType` performs the
range check when the type is unset (nil).
fixes#22775
It's pre-existing that [`prepareOperand` doesn't typecheck expressions
which have
types](a4f3bf3742/compiler/sigmatch.nim (L2444)).
Templates can take typed subscript expressions, transform them into
calls to `[]`, and then have this `[]` not be resolved later if the
expression is nested inside of a call argument, which leaks an untyped
expression past semantic analysis. To prevent this, don't transform any
typed subscript expressions into calls to `[]` in templates. Ditto for
curly subscripts (with `{}`) and assignments to subscripts and curly
subscripts (with `[]=` and `{}=`).
This is in reference to a [feature
request](https://github.com/nim-lang/Nim/issues/22142) that I posted.
I'm making this PR to demonstrate the suggested change and expect that
this should be scrutinized
---------
Co-authored-by: Bung <crc32@qq.com>
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
This PR modernises the NEP1 style guide to prefer hanging indent over
vertial alignment for long code statements while still allowing
alignment in legacy code.
The change is based on research and study of existing style guides for
both braced and indented languages that have seen wide adoption as well
as working with a large Nim codebase with several teams touching the
same code regularly.
The research was done as part of due diligence leading up to
[nph](https://github.com/arnetheduck/nph) which uses this style
throughout.
There are several reasons why hanging indent works well for
collaboration, good code practices and modern Nim features:
* as NEP1 itself points out, alignment causes unnecessary friction when
refactoring, adding/removing items to lists and otherwise improving code
style or due to the need for realignment - the new recommendation aligns
NEP1 with itself
* When collaborating, alignment leads to unnecessary git conflicts and
blame changes - with hanging indent, such conflicts are minimised.
* Vertical alignment pushes much of the code to the right where often
there is little space - when using modern features such as generics
where types may be composed of several (descriptively named) components,
there is simply no more room for parameters or comments
* The space to the left of the alignemnt cannot productively be used for
anything (unlike on the right, where comments may be placed)
* Double hanging indent maintaines visual separation between parameters
/ condition and the body that follows.
This may seem like a drastic change, but in reality, it is not:
* the most popular editor for Nim (vscode) already promotes this style
by default (if you press enter after `(`, it will jump to an indent on
the next line)
* although orthogonal to these changes, tools such as `nph` can be used
to reformat existing code should this be desired - when done in a single
commit, `git blame` is not lost and neither are exsting PRs (they can
simply be reformatted deterministically) - `nph` is also integrated with
vscode.
* It only affects long lines - ie most code remains unchanged
Examples of vertical alignment in the wild, for wildly successful
languages and formatters:
* [PEP-8](https://peps.python.org/pep-0008/#indentation)
*
[black](https://black.readthedocs.io/en/stable/the_black_code_style/current_style.html#how-black-wraps-lines)
* [prettier](https://prettier.io/docs/en/)
The above examples are useful mainly to show that hanging-indent
_generally_ is no impediment to efficient code reading and on the whole
is an uncontroversial choice as befits the standard library.
why ?
- We already have an emit that does the same thing
- The name asm itself is a bit confusing, you might think it's an alias
for asm.js or something else.
- The asm keyword is used differently on different compiler targets (it
makes it inexpressive).
- Does anyone (other than some compiler libraries) use asm instead of
emit ? If yes, it's a bit strange to use asm somewhere and emit
somewhere. By making the asm keyword for js target deprecated, there
would be even less use of the asm keyword for js target, reducing the
amount of confusion.
- New users might accidentally use a non-universal approach via the asm
keyword instead of emit, and then when they learn about asm, try to
figure out what the differences are.
see https://forum.nim-lang.org/t/10821
---------
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
fixes#23002, fixes#22841, refs comments in #23097
When an identifier is ambiguous in scope (i.e. multiple imports contain
symbols with the same name), attempt resolving it through type inference
(by creating a symchoice). To do this efficiently, `qualifiedLookUp` had
to be broken up so that `semExpr` can access the ambiguous candidates
directly (now obtained directly via `lookUpCandidates`).
This fixes the linked issues, but an example like:
```nim
let on = 123
{.warning[ProveInit]: on.}
```
will still fail, since `on` is unambiguously the local `let` symbol here
(this is also true for `proc on` but `proc` symbols generate symchoices
anyway).
Type symbols are not considered to not confuse the type inference. This
includes the change in sigmatch, up to this point symchoices with
nonoverloadable symbols could be created, they just wouldn't be
considered during disambiguation. Now every proper symbol except types
are considered in disambiguation, so the correct symbols must be picked
during the creation of the symchoice node. I remember there being a
violating case of this in the compiler, but this was very likely fixed
by excluding type symbols as CI seems to have found no issues.
The pure enum ambiguity test was disabled because ambiguous pure enums
now behave like overloadable enums with this behavior, so we get a
longer error message for `echo amb` like `type mismatch: got <MyEnum |
OtherEnum> but expected T`
Filling in some more logic in `typeRel` that I came across when poking
the compiler in another PR. Some of the cases where `typeRel` returns an
"incorrect" result are actually common, but `sumGeneric` ends up
breaking the tie correctly. There isn't anything wrong with that
necessarily, but I assume that it's preferred these functions behave
just as well in isolation as they do when integrated.
I will be following up this description with specific examples.
Fixes an issue where importing the `strutils` module, or any other
importing the `strutils` module, ends up with a compile time error on
platforms where ints are less then 32-bit wide.
The fix follows the suggestions made in #23125.
(Inspired by this pragma in nir asm PR)
`inlineAsmSyntax` pragma allowing specify target inline assembler syntax
in `asm` stmt.
It prevents compiling code with different of the target CC inline asm
syntax, i.e. it will not allow gcc inline asm code to be compiled with
vcc.
```nim
proc nothing() =
asm {.inlineAsmSyntax: "gcc".} """
nop
"""
```
The current C(C++) backend implementation cannot generate code for gcc
and for vcc at the same time. For example, `{.inlineAsmSyntax: "vcc".}`
with the ICC compiler will not generate code with intel asm syntax, even
though ICC can use both gcc-like asm and vcc-like. For implement support
for gcc and for vcc at the same time in ICC compiler, we need to
refactor extccomp
---------
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
I have made `realloc` absorb unused adjacent memory, which improves the
performance. I'm investigating whether `deallocOsPages` can be used to
improve memory comsumption.
Rendering of `nkRecList` produces an indent and adds a new line at the
end. However for things like case object `of`/`else` branches or `when`
branches this is already done, so this produces 2 indents and an extra
new line. Instead, just add an indent in the place where the indent that
`nkRecList` produces is needed, for the rendering of the final node of
`nkObjectTy`. There doesn't seem to be a need to add the newline.
Before:
```nim
case x*: bool
of true:
y*: int
of false:
nil
```
After:
```nim
case x*: bool
of true:
y*: int
of false:
nil
```
Continued from #23096 which was reverted due to breaking a package and
failing docgen tests. Docgen should now work, but ~~a PR is still
pending for the package: https://github.com/SciNim/Unchained/pull/45~~
has been merged
refs #23091, especially post merge comments
Unsure if `experimental` and `bind` are the perfect constructs to use
but they seem to get the job done here. Symbol nodes do not get marked
`nfOpenSym` if the `bind` statement is used for their symbol, and
`nfOpenSym` nodes do not get replaced by new local symbols if the
experimental switch is not enabled in the local context (meaning it also
works with `push experimental`). However this incurs a warning as the
fact that the node is marked `nfOpenSym` means we did not `bind` it, so
we might want to do that or turn on the experimental switch if we didn't
intend to bind it.
The experimental switch name is arbitrary and could be changed.
---------
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
This code will crash `check`/`nimsuggest` since the `ra` register is
uninitialised
```nim
import macros
static:
discard parseExpr("'")
```
Now it assigns an empty node so that it has something
Testament changes were so I could properly write a test. It would pass
even with a segfault since it could find the error
fixes#22605, separated from #22744
This marks symbol captures in macro calls in generic contexts as
`nfOpenSym`, which means if there is a new symbol in the local
instantiatied body during instantiation time, this symbol replaces the
captured symbol. We have to be careful not to consider symbols outside
of the instantiation body during instantiation, because this will leak
symbols from the instantiation context scope rather than the original
declaration scope. This is done by checking if the local context owner
(maybe should be the symbol of the proc currently getting instantiated
instead? not sure how to get this) is the same as or a parent owner of
the owner of the replacement candidate symbol.
This solution is distinct from the symchoice mechanisms which we
originally assumed had to be related, if this assumption was wrong it
would explain why this solution took so long to arrive at.
Closes#14329
Marks `macros.error` as `.noreturn` so that it can be used in
expressions. This also fixes the issue that occurred in #19659 where a
stmt that could be an expression (Due to having `discardable` procs at
the end of other branches) would believe a `noreturn` proc is returning
the same type e.g.
```nim
proc bar(): int {.discardable.} = discard
if true: bar()
else: quit(0) # Says that quit is of type `int` and needs to be used/discarded except it actually has no return type
```
fixes#22227
rationale:
- `3u - 4u` is supported why not`3u.toRational - 4u.toRational`
- all of rationals' api is on SomeInteger, looks like unsigned is
declared as supported
- math on unsigned rationals is meaningful and useful.
Just makes the case statements easier to look at when folded
```nim
case foo
of a:
of b:
of c:
else:
case bar:
of a:
of b:
of c:
of d:
else:
```
to
```nim
case foo
of a:
of b:
of c:
else:
case bar:
of a:
of b:
of c:
of d:
else:
```
Currently pragmas just fall through to `suggestSentinel` and show
everything which isn't very useful. Now it filters for symbols that
could be pragmas (templates with `{.pragma.}`, macros, user pragmas) and
only shows them
When running `check`/`suggest` in a file with an invalid user pragma
like
```nim
{.pragma foo: test.}
```
It will continue to try and process it which leads to the compiler
running into a `FieldDefect`
```
fatal.nim(53) sysFatal
Error: unhandled exception: field 'sons' is not accessible for type 'TNode' using 'kind = nkIdent' [FieldDefect]
```
This makes it instead bail out trying to process the user pragma if its
invalid
In the docs for strutils.multiReplace:
Making it more explicit that left to right comes before the order in the
replacements arg (but that the latter matters too).
E.g.
```
echo "ab".multiReplace(@[("a", "1"), ("ax", "2")])
echo "ab".multiReplace(@[("ab", "2"), ("a", "1")])
```
gives
```
1b
2
```
resolves#23016
For example with the command `nim r foo/bar.nim`, if `foo/` doesn't
exist then it shows this message
```
oserrors.nim(92) raiseOSError
Error: unhandled exception: No such file or directory
Additional info: foo [OSError]
```
After PR it shows
```
Error: cannot open 'foo/bar.nim'
```
Which makes it line up with the error message if `foo/` did exist but
`bar.nim` didn't. Does this by using the same logic for [handling if the
file doesn't
exist](0dc12ec24b/compiler/options.nim (L785-L788))
I'm not sure if this is a complete fix, as it does not match the
expected output given in the issue. The expected output given in the
issue highlights the identifier after the `'` the same color as numeric
literals (blue), and this change does not address that. I think that
would involve simplifying `nimNumberPostfix`.
However, this fixes the issue where the routine declaration was rendered
as a string.
New rendering:
While looking at the CI I noticed that there's a couple false positives
for `case` statements that cannot be checked for exhaustiveness since my
changes, this should resolve them.
---------
Co-authored-by: SirOlaf <>
**TODO**
- [x] fixes changelog
With the new option `nimPreviewVtables`, `methods` are confined in the
same module where the type of the first parameter is defined
- [x] make it opt in after CI checks its feasibility
## In the following-up PRs
- [ ] in the following PRs, refactor code into a more efficient one
- [ ] cpp needs special treatments since it cannot embed array in light
of the preceding limits: ref
https://github.com/nim-lang/Nim/pull/20977#discussion_r1035528927; we
can support cpp backends with vtable implementations later on the
comprise that uses indirect vtable access
---------
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
Currently running `nimsuggest`/`check` on this code causes the compiler
to raise an exception
```nim
type
Test = enum
A = 9.0
```
```
assertions.nim(34) raiseAssert
Error: unhandled exception: int128.nim(69, 11) `arg.sdata(3) == 0` out of range [AssertionDefect]
```
Issue was the compiler still trying to get the ordinal value even if it
wasn't an ordinal
Currently when using `use` with nimsuggest on an enum field, it doesn't
return the definition of the field.
Breaks renaming in IDEs since it will replace all the usages, but not
the declaration
fixes#22286
ref https://forum.nim-lang.org/t/10642
For backwards compatibilities, we might need to keep the changes under a
preview compiler flag. Let's see how many packags it break.
**TODO** in the following PRs
- [ ] Turn the `var T` destructors warning into an error with
`nimPreviewNonVarDestructor`
---------
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
When it is specified, the nimsuggest instance monitors whether this
process is still alive. In case it's found to be dead, nimsuggest shuts
itself down. Currently only implemented on POSIX and Windows platforms.
The switch is silently ignored on other platforms. Note that the Nim
language server should still try to shut down its child nimsuggest
processes. This switch just adds extra protection against crashing Nim
language server and gets rid of the remaining nimsuggest processes,
which consume memory and system resources.
Currently the suggestions create a lot of noise when creating enum
fields. I don't see any way of a macro creating fields (when called
inside an enum) so it should be safe to not show suggestions
---------
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
…var/let symbols
fixes#22939fixes#16890
Besides, it was applied to let/const/var with pragmas, now it is
universally applied.
```nim
{.push exportc.}
proc foo =
let bar = 12
echo bar
{.pop.}
```
For example, the `bar` variable will be affected by `exportc`.
Since nimsuggest now has a protocol version support detection via
`--info:protocolVer`, the InlayHints feature can be moved to protocol
V4. This way, the Nim language server can detect the nimsuggest version
and avoid sending unsupported `InlayHints` commands to older nimsuggest
versions. Related nim language server PR:
https://github.com/nim-lang/langserver/pull/60
In this PR, the following changes were made:
1. Replaced `raise newException(OSError, osErrorMsg(errno))` in batches
with `raiseOSError(errcode)`.
2. Replaced `newException(OSError, osErrorMsg(errno))` in batches with
`newOSError(errcode)`.
There are still some places that have not been replaced. After checking,
they are not system errors in the traditional sense.
```nim
proc dlclose(lib: LibHandle) =
raise newException(OSError, "dlclose not implemented on Nintendo Switch!")
```
```nim
if not fileExists(result) and not dirExists(result):
# consider using: `raiseOSError(osLastError(), result)`
raise newException(OSError, "file '" & result & "' does not exist")
```
```nim
proc paramStr*(i: int): string =
raise newException(OSError, "paramStr is not implemented on Genode")
```
This is a small improvement on top of PR #22924, which documents the new
'j' format specifier for Complex numbers. In addition to that it moves
the handling of the j specifier into the function that actually
implements it (formatValueAsComplexNumber), which seems a little
cleaner.
---------
Co-authored-by: Angel Ezquerra <angel_ezquerra@keysight.com>
Co-authored-by: Clay Sweetser <Varriount@users.noreply.github.com>
Refactored the way nimsuggest checks for protocol version 3. Instead of
checking for version 3 exactly, it now checks for version 3 or later.
This way, once a version 4 is introduced, it will use version 3 as a
base line, and then extra changes to the protocol can be added on top.
No functional changes are introduced in this commit.
`--info:protocolVer` returns the highest nimsuggest protocol version
that is supported (currently, it's version 3).
`--info:nimVer` returns the Nim compiler version that nimsuggest uses
internally.
Note that you can obtain the Nim compiler version via `nimsuggest -v`,
but that requires parsing the output, which looks like this:
```
Nim Compiler Version 2.1.1 [Linux: amd64]
Compiled at 2023-11-14
Copyright (c) 2006-2023 by Andreas Rumpf
git hash: 47ddfeca5247dce992becd734d1ae44e621207b8
active boot switches: -d:release -d:danger --gc:markAndSweep
```
`--info:nimVer` will return just:
```
2.1.1
```
Before this change strformat used the generic formatValue function for
Complex numbers. This meant that it was not possible to control the
format of the real and imaginary components of the complex numbers.
With this change this now works:
```nim
import std/[complex, strformat]
let c = complex(1.05000001, -2.000003)
echo &"{c:g}"
# You now get: (1.05, -2)
# while before you'd get a ValueError exception (invalid type in format string for string, expected 's', but got g)
```
The only small drawback of this change is that I had to import complex
from strformat. I hope that is not a problem.
---------
Co-authored-by: Angel Ezquerra <angel_ezquerra@keysight.com>
Fixes the assertion defect that happens when using `jsondoc --stdout`
(There is no outfile since its just stdout)
```
Error: unhandled exception: options.nim(732, 3) `not conf.outFile.isEmpty` [AssertionDefect]
```
Also makes the output easier to parse by ending each module output with
a new line.
Per manual, `panics:on` affects _only_ `Defect`:s - thus `sysFatal`
should not redirect any other exceptions.
Also, when `sysFatal` is used in `nimPanics` mode, it should use regular
exception handling pipeline to ensure exception hooks are called
consistently for all raised defects.
fixes#22898
In these cases, the tables/sets are clears or elements are deleted from
them. It's reasonable to suppress warnings because the value is not
accessed anymore, which means it's safe to ignore the warnings.
This adds inlay hints support to nimsuggest. It adds a new command to
nimsuggest, called 'inlayHints'.
Currently, it provides type information to 'var' and 'let' variables. In
the future, inlay hints can also be added for 'const' and for function
parameters. The protocol also reserves space for a tooltip field, which
is not used, yet, but support for it can be added in the future, without
further changing the protocol.
The change includes refactoring to allow the 'inlayHints' command to
return a completely different structure, compared to the other
nimsuggest commands. This will allow other future commands to have
custom return types as well. All the previous commands return the same
structure as before, so perfect backwards compatibility is maintained.
To use this feature, an update to the nim language server, as well as
the VS code extension is needed.
Related PRs:
nimlangserver: https://github.com/nim-lang/langserver/pull/53
VS code extension: https://github.com/saem/vscode-nim/pull/134
---------
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
Continuation of https://github.com/nim-lang/Nim/pull/19262
Fixes https://github.com/nim-lang/Nim/issues/19261
The parsing code is still too lenient (e.g. it will happily parse header
names with spaces in them, which is outright invalid by the spec), but I
didn't want to touch it beyond the simple changes to make sure that
`std/httpclient` won't throw `IndexDefect`s like it does now on those
cases:
- Multiline header values
- No colon after the header name
- No value after the header name + colon
One question remains - should I keep `toCaseInsensitive` exported in
`httpcore` or just copy-paste the implementation?
---------
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
fixes#22883
…eDefault` warnings
avoid issues mentioned by https://forum.nim-lang.org namely, it
allocated unnecessary stack objects in the loop
```c
while (1)
{
tyObject_N__8DSNqSGSHBKOhI8CqSgAow T5_;
nimZeroMem((void *)(&T5_), sizeof(tyObject_N__8DSNqSGSHBKOhI8CqSgAow));
eqsink___test4954_u450((&(*t_p0).data.p->data[i].Field1), T5_);
}
```
It might be more efficient in some cases
follow up https://github.com/nim-lang/Nim/pull/21821
Per https://datatracker.ietf.org/doc/html/rfc9110#name-user-agent a
User-Agent is defined as follows:
```
User-Agent = product *( RWS ( product / comment ) )
```
Where
```
product = token ["/" product-version]
product-version = token
```
In this case, `token` is defined in RFC 7230 -
https://datatracker.ietf.org/doc/html/rfc7230#section-3.2.6:
```
token = 1*tchar
tchar = "!" / "#" / "$" / "%" / "&" / "'" / "*"
/ "+" / "-" / "." / "^" / "_" / "`" / "|" / "~"
/ DIGIT / ALPHA
; any VCHAR, except delimiters
```
or, in the original RFC 2616 -
https://datatracker.ietf.org/doc/html/rfc2616#section-2.2 (next page):
```
token = 1*<any CHAR except CTLs or separators>
separators = "(" | ")" | "<" | ">" | "@"
| "," | ";" | ":" | "\" | <">
| "/" | "[" | "]" | "?" | "="
| "{" | "}" | SP | HT
```
which means that a `token` cannot have whitespace. Not sure if this
should be in the breaking changelog section - theoretically, some
clients might've relied on the old Nim user-agent?
For some extra info, some other languages seem to have adopted the same
hyphen user agent to specify the language + module, e.g.:
-
https://github.com/python/cpython/blob/main/Lib/urllib/request.py#L1679
(`Python-urllib/<version>`)
Fixes#22862.
fixes#22856
`-d:nimStrictDelete` is introduced in 1.6.0, which promised to be
enabled in the coming versions. To keep backwards incompatibilities, it
also extends the feature of `-d:nimAuditDelete`, which now mimics the
old behaviors.
1. `freeAddrInfo` is called prematurely, the variable `myAddr` is still
in use
2. Use defer syntax to ensure that `freeAddrInfo` is also called on
exceptions
Close#22826
I am not sure why this code skips generic insts, so letting CI tell me.
Update: It has told me nothing. Maybe someone knows during review.
Issue itself seems to be that the generic instance is skipped thus it
ends up being just `float` which makes it use the wrong generic instance
of the proc because it matches the one in cache
---------
Co-authored-by: SirOlaf <>
At least on modern Nim `tempfiles` is not usable if the user has
https://github.com/oprypin/nim-random installed, because the compiler
picks the nimble path over the stdlib path (apparently).
fix#22834
Edit: also fixes `result.addrList` when IPv6, which previously only
performed a `result.addrList = cstringArrayToSeq(s.h_addr_list)` which
does not provide the textual representation of an IPv6
- Bisect default to Linux only. Tiny diff, YAML only.
| OS | How to? |
|----|---------|
| Linux | `-d:linux` |
| Windows | `-d:windows` |
| OS X | `-d:osx` |
If no `-d:linux` nor `-d:windows` nor `-d:osx` is used then defaults to
Linux.
Theoretical Benefits / Plans:
- Typed assembler-like language.
- Allows for a CPS transformation.
- Can replace the existing C backend by a new C backend.
- Can replace the VM.
- Can do more effective "not nil" checking and static array bounds
checking.
- Can be used instead of the DFA.
- Easily translatable to LLVM.
- Reasonably easy to produce native code from.
- Tiny memory consumption. No pointers, no cry.
**In very early stages of development.**
Todo:
- [x] Map Nim types to IR types.
- [ ] Map Nim AST to IR instructions:
- [x] Map bitsets to bitops.
- [ ] Implement string cases.
- [ ] Implement range and index checks.
- [x] Implement `default(T)` builtin.
- [x] Implement multi string concat.
- [ ] Write some analysis passes.
- [ ] Write a backend.
- [x] Integrate into the compilation pipeline.
in `std/nre`
```nim
proc initRegex(pattern: string, flags: int, study = true): Regex =
new(result, destroyRegex)
```
gives incorrect warnings like
```
C:\Users\blue\Documents\Nim\lib\impure\nre.nim(252, 6) Error: A custom '=destroy' hook which takes a 'var T' parameter is deprecated; it should take a 'T' parameter [Deprecated
```
Since they are integer types, by mean of allowing cast integer to enums
in VM, we can suppress some enum warnings in the stdlib in the unified
form, namely using a cast expression.
This would be handy for making terminal apps which display content below
the prompt (e.g. `fzf` does this).
Need to test it on windows before I remove "draft" status.
---------
Co-authored-by: Matt Rixman <MatrixManAtYrService@users.noreply.github.com>
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
I came across this sentence in the Nim Manual and couldn't make sense of
it. I believe this is the correct fix for the sentence.
---------
Co-authored-by: ringabout <43030857+ringabout@users.noreply.github.com>
fixes#22753
## Future work
We should turn all the error nodes into nodes of a nkError kind, which
could be a industrious task. But perhaps we can add a special treatment
for error nodes to make the transition smooth.
I couldn't find any documentation on the syntax for --hint:X:on|off with
`nimscript` except in [this old forum
post](https://forum.nim-lang.org/t/8526#55236).
The goal of this PR is to make `typeRel` accurate to it's definition for
generics:
```
# 3) When used with two type classes, it will check whether the types
# matching the first type class (aOrig) are a strict subset of the types matching
# the other (f). This allows us to compare the signatures of generic procs in
# order to give preferrence to the most specific one:
```
I don't want this PR to break any code, and I want to preserve all of
Nims current behaviors. I think that making this more accurate will help
serve as ground work for the future. It may not be possible to not break
anything but this is my attempt.
So that it is understood, this code was part of another PR (#22143) but
that problem statement only needed this change by extension. It's more
organized to split two problems into two PRs and this issue, being
non-breaking, should be a more immediate improvement.
---------
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
- `copyFile` allows to specify `bufferSize` instead of hardcoded wrong
value. Tiny diff.
# Performance
- 1200% Performance improvement.
# Check it yourself
Execute:
```bash
for i in $(seq 0 10); do
bs=$((1024*2**$i))
printf "%7s Kb\t" $bs
timeout --foreground -sINT 2 dd bs=$bs if=/dev/zero of=/dev/null 2>&1 | sed -n 's/.* \([0-9.,]* [GM]B\/s\)/\1/p'
done
```
(This script can be ported to PowerShell for Windows I guess, it works
in Windows MinGW Bash anyways).
# Stats
- Hardcoded `8192` or `8000` Kb bufferSize gives `5` GB/s.
- Setting `262144` Kb bufferSize gives `65` GB/s (script suggestion).
---------
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
- Support multiple OS Bisects (Linux, Windows, MacOS).
- Install Valgrind only if needed to speed up non-Valgrind builds.
- Valgrind+MacOS bisect support.
- Show IR of OK repro code samples.
- YAML only, tiny diff.
#### New features
- Bisect bugs that only reproduce on Windows and OSX.
#### See also
- https://github.com/juancarlospaco/nimrun-action/pull/10
```nim
echo newString(8)
```
results in:
```
D:\User\test.js:25
var code_33556944 = c_33556931.toString(16);
^
TypeError: Cannot read properties of undefined (reading 'toString')
at toJSStr (D:\User\test.js:25:50)
at rawEcho (D:\User\test.js:70:16)
at Object.<anonymous> (D:\User\test.js:101:1)
at Module._compile (node:internal/modules/cjs/loader:1095:14)
at Object.Module._extensions..js (node:internal/modules/cjs/loader:1147:10)
at Module.load (node:internal/modules/cjs/loader:975:32)
at Function.Module._load (node:internal/modules/cjs/loader:822:12)
at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:81:12)
at node:internal/main/run_main_module:17:47
Node.js v17.0.1
Error: execution of an external program failed: '"C:\Program Files\nodejs\node.exe" --unhandled-rejections=strict D:\User\test.js'
```
`{.push overflowChecks: off.}` works in backends. Though it could be
implemented as a magic function.
By inspecting the generated C code, the overflow check is eliminated in
the debug or release mode.
Likewise, the index checking is probably not needed.
refs #22605
Sym choice nodes are now only allowed to pass through semchecking if
contexts ask for them to (with `efAllowSymChoice`). Otherwise they are
resolved or treated as ambiguous. The contexts that can receive
symchoices in this PR are:
* Call operands and addresses and emulations of such, which will subject
them to overload resolution which will resolve them or fail.
* Type conversion operands only for routine symchoices for type
disambiguation syntax (like `(proc (x: int): int)(foo)`), which will
resolve them or fail.
* Proc parameter default values both at the declaration and during
generic instantiation, which undergo type narrowing and so will resolve
them or fail.
This means unless these contexts mess up sym choice nodes should never
leave the semchecking stage. This serves as a blueprint for future
improvements to intermediate symbol resolution.
Some tangential changes are also in this PR:
1. The `AmbiguousEnum` hint is removed, it was always disabled by
default and since #22606 it only started getting emitted after the
symchoice was soundly resolved.
2. Proc setter syntax (`a.b = c` becoming `` `b=`(a, c) ``) used to
fully type check the RHS before passing the transformed call node to
proc overloading. Now it just passes the original node directly so proc
overloading can deal with its typechecking.
`semtempl` is refactored to combine the uses of `getIdentNode`,
`onlyReplaceParams`, `isTemplParam` and most of `replaceIdentBySym` into
a single `getIdentReplaceParams` proc. This might fix possible problems
with injections of `nkAccQuoted`.
Some special word comparison in `ast` and `semtempl` are also made more
efficient.
follow up https://github.com/nim-lang/Nim/pull/10806
Eventually we need a new option to print high level IR. It's confusing
when I'm debugging the compiler without showing `return result = 1`
using the expandArc option.
For
```nim
proc foo: int =
return 2
```
It now outputs when expanding ARC IR
```nim
proc foo: int =
return result = 2
```
fixes#22676
If csource or CI forbids it, we can always fall back to adding it to the
nonPragmaWords list. I doubt it was used outside of the system since it
was used to implement & or something for magics.
Attempts to move the generic instantiation to the module that uses it.
This should decrease re-compilation times as the source module where the
generic lives doesnt need to be recompiled
---------
Co-authored-by: ringabout <43030857+ringabout@users.noreply.github.com>
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
Close#21742
Checking if there's any side-effects and if just changing typeRel is
adequate for this issue before trying to look into related ones.
`skipBoth` is also not that great, it can lead to code that works
sometimes but fails when the proc is instantiated with branching
aliases. This is mostly an issue with error clarity though.
---------
Co-authored-by: SirOlaf <unknown>
Co-authored-by: SirOlaf <>
Close#17509
Current knowledge:
- delaying cache fixes the issue
- changing return of `if inst.len < key.len:` in `searchInstTypes` to
`continue` fixes the issue. With return the broken types are also cached
over and over
Related issues are completely unaffected as of now, so there must be
something deeper.
I am also still trying to find the true cause, so feel free to ignore
for now
---------
Co-authored-by: SirOlaf <>
Move `symFromType` and `symNodeFromType` from `sem`, and `isSelf` and
`makeTypeDesc` from `concepts` into `semdata`.
`makeTypeDesc` was moved out from semdata [when the `concepts` module
was
added](6278b5d89a),
so its old position might have been intended. If not, `isSelf` can also
go in `ast`.
refs #22650
Docs CI cover standard library runnable examples that aren't covered by
the test suite and can be affected by compiler changes without knowing
fixes#22639 for the third time
Nodes generated by `getType` for `tyGenericInst` types, instead of
having the original `tyGenericInst` type, will have the type of the last
child (due to the `mapTypeToAst` calls which set the type to the given
argument). This will cause subsequent `getType` calls to lose
information and think it's OK to use the sym of the instantiated type
rather than fully expand the generic instantiation.
To prevent this, update the type of the node from the `mapTypeToAst`
calls to the full generic instantiation type.
fixes https://github.com/nim-lang/Nim/issues/22619
It causes double free for closure iterators because cursor fields are
destroyed in the lifted destructors of `Env`.
Besides, according to the Nim manual
> In fact, cursor more generally prevents object
construction/destruction pairs and so can also be useful in other
contexts.
At least, destruction of cursor fields might cause troubles.
todo
- [x] tests
- [x] revert a certain old PR
---------
Co-authored-by: zerbina <100542850+zerbina@users.noreply.github.com>
fixes#22639
A `tyGenericInst` has its last son as the instantiated body of the
original generic type. However this type keeps its original `sym` field
from the original generic types, which means the sym's type is
uninstantiated. This causes problems in the implementation of `getType`,
where it uses the `sym` fields of types to represent them in AST, the
relevant example for the issue being
[here](d13aab50cf/compiler/vmdeps.nim (L191))
called from
[here](d13aab50cf/compiler/vmdeps.nim (L143)).
To fix this, create a new symbol from the original symbol for the
instantiated body during the creation of `tyGenericInst`s with the
appropriate type. Normally `replaceTypeVarsS` would be used for this,
but here it seems to cause some recursion issue (immediately gives an
error like "cannot instantiate HSlice[T, U]"), so we directly set the
symbol's type to the instantiated type.
Avoiding recursion means we also cannot use `replaceTypeVarsN` for the
symbol AST, and the symbol not having any AST crashes the implementation
of `getType` again
[here](d13aab50cf/compiler/vmdeps.nim (L167)),
so the symbol AST is set to the original generic type AST for now which
is what it was before anyway.
Not sure about this because not sure why the recursion issue is
happening, putting it at the end of the proc doesn't help either. Also
not sure if the `cl.owner != nil and s.owner != cl.owner` condition from
`replaceTypeVarsS` is relevant here. This might also break some code if
it depended on the original generic type symbol being given.
```nim
{.experimental: "strictdefs".}
type Test = object
id: int
proc test(): Test =
if true:
return Test()
else:
return
echo test()
```
I will tackle https://github.com/nim-lang/Nim/issues/16735 and #21615 in
the following PR.
The old code just premises that in branches ended with returns, raise
statements etc. , all variables including the result variable are
initialized for that branch. It's true for noreturn statements. But it
is false for the result variable in a branch tailing with a return
statement, in which the result variable is not initialized. The solution
is not perfect for usages below branch statements with the result
variable uninitialized, but it should suffice for now, which gives a
proper warning.
It also fixes
```nim
{.experimental: "strictdefs".}
type Test = object
id: int
proc foo {.noreturn.} = discard
proc test9(x: bool): Test =
if x:
foo()
else:
foo()
```
which gives a warning, but shouldn't
This implements Pandoc Markdown-style footnotes,
that are compatible with Pandoc referencing syntax:
Ref. [^ftn].
[^ftn]: Block.
See https://pandoc.org/MANUAL.html#footnotes for more examples.
fixes#22598, properly fixes#21887 and fixes test case issue number
When an enum field sym choice has to choose a type, check if its name is
ambiguous in the local scope, then check if the first symbol found in
the local scope is the first symbol in the sym choice. If so, choose
that symbol. Otherwise, give an ambiguous identifier error.
The dependence on the local scope implies this will always give
ambiguity errors for unpicked enum symchoices from generics and
templates and macros from other scopes. We can change `not
isAmbiguous(...) and foundSym == first` to `not (isAmbiguous(...) and
foundSym == first)` to make it so they never give ambiguity errors, and
always pick the first symbol in the symchoice. I can do this if this is
preferred, but no code from CI seems affected.
* fixes#22613; Default value does not work with object's discriminator
fixes#22613
* merge branches
* add a test case
* fixes status
* remove outdated comments
* move collectBranchFields into the global scope
* deprecate `std/threadpool`; use `malebolgia` instead
* Apply suggestions from code review
* Apply suggestions from code review
* change the URL of inim
* fixes newStringUninitialized; implement `newStringUninitialized`
* add a simple test case
* adds a changelog
* Update lib/system.nim
* Apply suggestions from code review
rename to newStringUninit
* test case haul for old generic/template/macro issues
closes#12582, closes#19552, closes#2465, closes#4596, closes#15246,
closes#12683, closes#7889, closes#4547, closes#12415, closes#2002,
closes#1771, closes#5121
The test for #5648 is also moved into its own test
from `types/tissues_types` due to not being joinable.
* fix template gensym test
* fix generic param substitution in templates
fixes#13527, fixes#17240, fixes#6340, fixes#20033, fixes#19576, fixes#19076
* fix bare except in test, test updated packages in CI
* round out tuple unpacking assignment, support underscores
fixes#18710
* fix test messages
* use discard instead of continue
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
---------
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
* fix#22492
* Update nimdoc.css
remove scroll-y
* Update nimdoc.out.css
* Update nimdoc.css
* make it sticky again
* Update nimdoc.out.css
* danm sticky, use fixed
* Update nimdoc.out.css
* fix margin
* Update nimdoc.out.css
* make search input react to any change (not just keyboard events) according to https://github.com/nim-lang/Nim/pull/22511#issuecomment-1685218787
* Keep return in mind for sink
* Keep track of return using bool instead of mode
* Update compiler/injectdestructors.nim
* Add back IsReturn
---------
Co-authored-by: SirOlaf <>
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
* #22514 Expand docs on testament spec options
The file, line and column options of testament are not in the docs,
but can be very important to know.
They allow you to specify where a compile-time error originated from.
Particularly given that testament assumes the origin to always be
the test-file, this is important to know.
* #22514 Specify nimout relevance a bit more
* #22514 Fix slightly erroneous doc-link
* #22514 Add example
* #22514 Add some docs on ccodecheck
* fix#12938 nim compiler assertion fail when literal integer is passed as template argument for array size
* use new flag tfImplicitStatic
* fix
* fix#14193
* correct tfUnresolved add condition
* clean test
It seems that `--stylecheck:error` acts up when the name forwards is involved.
```nim
proc thisOne*(x: var int)
proc thisone(x: var int) = x = 1
```
It cannot understand this at all.
```nim
{.experimental: "strictdefs".}
type
NodeKind = enum
nkImportStmt
nkStmtList
nkNone
PNode = ref object
kind: NodeKind
proc hasImportStmt(n: PNode): bool =
# Checks if the node is an import statement or
# i it contains one
case n.kind
of nkImportStmt:
return true
of nkStmtList:
if false:
return true
else:
result = false
var n = PNode()
echo hasImportStmt(n)
```
It compiles without warnings, but shouldn't. As a contrast,
```nim
{.experimental: "strictdefs".}
type
NodeKind = enum
nkImportStmt
nkStmtList
nkNone
PNode = ref object
kind: NodeKind
proc hasImportStmt(n: PNode): bool =
# Checks if the node is an import statement or
# i it contains one
case n.kind
of nkImportStmt:
result = true
of nkStmtList:
if false:
return true
else:
result = false
var n = PNode()
echo hasImportStmt(n)
```
This gives a proper warning.
* [C++] Member pragma RFC #530
rebase devel
* changes the test so `echo` is not used before Nim is init
* rebase devel
* fixes Error: use explicit initialization of X for clarity [Uninit]
* Play with typeRel
* Temp solution: Fixup call's param types
* Test result type with two generic params
* Asserts
* Tiny cleanup
* Skip sink
* Ignore proc
* Use changeType
* Remove conversion
* Remove last bits of conversion
* Flag
---------
Co-authored-by: SirOlaf <>
* fix server caching issue causing Theme failures
* Fix tester to ignore version cache param
* fix case of people using -d:nimTestsNimdocFixup
* rsttester needed the same fix
* Add test case
* Add in a bounds check when accessing generic types
Removes idnex out of bounds exception when comparing a generic that isn't fully instantiated
* Infer generic bindings
* Simple test
* Add t
* Allow it to work for templates too
* Fix some builds by putting bindings in a template
* Fix builtins
* Slightly more exotic seq test
* Test value-based generics using array
* Pass expectedType into buildBindings
* Put buildBindings into a proc
* Manual entry
* Remove leftover `
* Improve language used in the manual
* Experimental flag and fix basic constructors
* Tiny commend cleanup
* Move to experimental manual
* Use 'kind' so tuples continue to fail like before
* Explicitly disallow tuples
* Table test and document tuples
* Test type reduction
* Disable inferGenericTypes check for CI tests
* Remove tuple info in manual
* Always reduce types. Testing CI
* Fixes
* Ignore tyGenericInst
* Prevent binding already bound generic params
* tyUncheckedArray
* Few more types
* Update manual and check for flag again
* Update tests/generics/treturn_inference.nim
* var candidate, remove flag check again for CI
* Enable check once more
---------
Co-authored-by: SirOlaf <>
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
* fixes#22301; rejects branch initialization with a runtime discriminator with defaults
* undefault nimPreviewRangeDefault
* fixes tests
* use oldCheckDefault
* wip; fixes#22210; transform return future in try/finally properly
* add a test case for #22210
* minor
* inserts a needsCompletion flag
* uses copyNimNode
* Add example object into testproject
The proc is there to check the case of an identDef being inside an identDef (We do want to render those even if they are not exported)
* Add `inside` set to `TSrcGen` which allows us to see what context we are in
This is done instead of adding another inXyz bool parameter
We then use this to know if we are inside an object when rendering an nkIdentDefs (To know if we need to skip rendering it)
* Update test files
* Add tests
Also test if exported all tuple fields works. This seems like a hacky solution so will try and dive further to find a better solution
* Always suggest tuple fields if it passes the filter
If the tuple we are accessing is in scope then all the fields will also be in scope
* Update tests so line numbers are correct
Follow-up to #21576 (for solving #19607).
1) errors in Markdown mode for `.nim` doc comments are reported with
red color but allow to generate `.html` with the comment represented by
literate block (monospaced text). We suppose that it's what people want
for (supposedly) small doc comments. And this behavior is also a bit
more Markdown-ish in the sense that Markdown generally does not have
the concept of parsing error.
- However, for standalone `.md` it's **not** applied because for large
files the consequences are way bigger.
(In {.doctype: rst.} mode the behavior is the same as before -- report
the error and stop.)
In future, when our parser can handle Markdown without errors according to
the spec, this code will most probably be not needed.
* alternative to #22219; adds a pointer wrapper for T destructor
* clean up and add comments
* Update compiler/ccgtypes.nim
* tidy up
* fixes comments
* fixes cpp
* fixes cpp
* Add testcase
This tries to use a concept with a doc comment which currently leads to a segfault
* Ignore nil nodes which happen when there are doc comments in new style concept
This was done instead of semming the comments since `semConceptDecl` says it only supports lists of actual statements
* Go with alternative fix: Sem comments but ignore them
Since `nil` could mean anything it is best to not silently ignore it (In case another nil problem happens in future
Also fix test case so it isn't an infinite loop
* Add Git bisect like for bug repro code on issue comments against Nim versions >1.0
* Add Git bisect like for bug repro code on issue comments against Nim versions >1.0
* Add Git bisect like for bug repro code on issue comments against Nim versions >1.0
* Don't throw errors on RST tables in Markdown and RstMarkdown modes
Additions to RST simple tables (#19859) made their parsing more
restrictive, which can introduce problems with of some old
nimforum posts, which have tables with sloppily aligned columns
(like this one:
https://github.com/nim-lang/nimforum/issues/330#issuecomment-1376039966).
Also this strictness contradicts to Markdown style of not getting
in the way (ignoring errors).
So this PR proposes a new strategy of dealing with errors:
* In Markdown and legacy (old default) RstMarkdown we try to
continue parsing, emitting only warnings
* And only in pure RST mode we throw a error
I expect that this strategy will be applied to more parts of markup code
in the future.
* Don't return anything in `checkColumns`
* fix VM uint conversion bug, stricter int gen on JS
fixes#19929
* fix float -> uint64 conversion too
* no need to mask to source type
* simpler diff with explanation, add test for described issue
When the linker command line is long, Nim compiler generates a file for
passing the linker arguments. On `macOS`, that mechanism fails as the
`@` syntax is not supported by `ar`. Use `xargs` instead to pass the
linker arguments file.
* fix#20023 hash for generic tables
* use default computation
* Update lib/pure/collections/tables.nim
Co-authored-by: Dan Rose <dan@digilabs.io>
* Update lib/pure/collections/tables.nim
Co-authored-by: Dan Rose <dan@digilabs.io>
* Update lib/pure/collections/tables.nim
* Update lib/pure/collections/tables.nim
* Update t20023.nim
---------
Co-authored-by: Dan Rose <dan@digilabs.io>
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
This is a rebase of an earlier rejected PR. Following the discussion
around it, this commit provides a valid output for and edge case
of an empty separator for `split` and `rsplit` routines. The empty
separator is interpreted as "split by no separators" and the initial
string is returned. This is consistent with the behaviour of the
`set[char]` version of `split`/`rsplit` routines and unifies them all.
Compared to a commit merged earlier, this one has a benefit of
not using assertions that will be removed in release builds
and thus still not preventing possible infinite loops (which was the
earlier behaviour for this edge case for separator of type `string`).
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
* make destructors accept non var parameters
* define nimAllowNonVarDestructor
* add a test case and a changelog
* update documentation and error messages
* deprecate destructors taking 'var T'
I have tested it locally with the following in my local packages_official.json
```
{
"name": "compiler",
"url": "https://github.com/yyoncho/Nim.git/?subdir=compiler",
"method": "git",
"tags": [
"library",
"compiler"
],
"description": "Package providing the Nim compiler binaries plus all its source files that can be used as a library",
"license": "MIT",
"web": "https://github.com/nim-lang/Nim"
},
{
"name": "nimsuggest",
"url": "https://github.com/yyoncho/Nim.git/?nimsuggest=compiler",
"method": "git",
"tags": [
"library",
"compiler"
],
"description": "Package providing the Nim compiler binaries plus all its source files that can be used as a library",
"license": "MIT",
"web": "https://github.com/nim-lang/Nim"
},
```
Then `nimble install compiler`, `nimble install nimsuggest` work as expected.
* Adding divmod
* Adding support to VM
* Wrapped C structs and funcs
* Fix javascript impl
* Fixing struct compat
* Segregate tests, better compiletime defs
* Using `inline` and switch back to `func`
* Apply suggestions from code review
* Explicit structures
---------
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
* fixes#22054; codegen for var tuples conv
* rethink fixes
* add test cases
* templates only
* fixes var tuples
* keep varness no matter what
* fixes typ.isNil
* make it work for generics
* restore isSubrange
* add a test case as requested
* Allows for arbitrary ordering of inheritance in type section #6259
* prevents ilegal recursion
* fixes ilegal recursion. Test passes with a better message
* Apply suggestions from code review
---------
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
* sacrifice "tgenericshardcases" for working statics
* legacy switch for CI, maybe experimental later
* convert to experimental
* apparently untyped needs the experimental switch
* try special case call semcheck
* try fix
* fix compilation
* final cleanup, not experimental, make `when` work
* remove last needed use of untyped
* fix unused warning in test
* remove untyped feature
* fixes#22065; do not search path for "./"
* simplify
* fixes
* fixes
* allow ".."
* cleanup
* add a test case
* slightly modify the import
* adds a changelog
* fix dot calls with resolved symbols in templates
* make old code work
* fix custom number literals test
* remove leftover debug marker
* enable "bug 9" test too
* fix renderer, add test for #7085
When parsing enums from strings using `genEnumCaseStmt`, `AnyEnumConv`
warnings are generated due to conversion from integer value. It seems
possible meanwhile to refer to the actual `enum` value by symbol instead
of being required to do the conversion from `ord`, even when the `enum`
is defined in a `block`.
* atlas: SAT based package solver, WIP
* progress
* make tests green
* progress
* SAT: now works; enabled unit tests in versions.nim
* Atlas: SAT: completed
modified to fix blank page fault. see openDefaultBrowser()
The previous implement use "http:about:blank" which will be processed by "prepare" and be considered as a file path, turning to "file://...", which is no doubt beyond expectation.
To fix it,firstly the "about:blank" is used instead. Next, a new "openDefaultBrowserImplPrep" proc is added, take place of the previous version of "openDefaultBrowserImpl"
* fixes#21995: align C with C++ backend behavior for empty raise statements
* make runtime behavior match across both C and C++ backend and all exception modes
* clean up some test categories
* mention exact slice issue
* magics into system
* move trangechecks into overflow
* move tmemory to system
* try fix CI
* try fix CI
* final CI fix
* post expr blocks colon fix + correct grammar
fixes#21982
* fix dochelpers
* this is remarkably common
* use head for unchained
* fix atlas
* final grammar fix
* handle out of range value for `COLUMNS` / `LINES`
Querying terminal size may fail with a `ValueError` if size is too big.
Return highest possible value instead. Note that `ValueError` is also
reported on underflow (negative size) but that is out of POSIX specs.
* `parseSaturatedNatural`
* WIP: removal of seq spam in generated C/C++ output and Module.typeStack cleanup
* removal of seq spam in generated C/C++ output and Module.typeStack cleanup
* implements: [C++] constructor pragma improvement (fix#21921)
t
* fix test so it doesnt use echo in globals
* Update compiler/ccgtypes.nim
* Update lib/std/private/dragonbox.nim
---------
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
* Initial structure, `GitTags` → `GitRefsTags`
* Determine if we should use v prefix
* get tag from latest tag, patch nimble file
* Just do tags for now
* atlas tag now tags and pushes
* Improve UX of `atlas tag`
* better description for `tag`
* Small fixup
* Consistent naming
* strip after checking status
* Take major/minor/patch as arg for `atlas tag`
* undo testing comment
* Fix for `v` prefixed versions
* Avoid useless assignment
* Remove uselss enum assignment
* Consistent parameter seperation
* Add error handling for non-semver tags
* Use `assert` to quit on error
* Update tools/atlas/atlas.nim
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
* Don't push tags if errors occurred
* Allow `atlas tag [tag]` again
* Add atlas tag `a..z` for fields > 3
* Document the three input options
* Take up less lines in help
* Less or in help
* One last doc pass
* Check args length
* clarify last tag
* consistency/order
---------
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
* Get description and license from github json response
* Allow running `atlas search` outside of a workspace
* Check `len` instead of `dirExists`
* make `list` identical to `search`
* Add test case for a const being used inside an async proc
* Use `typeof` to get the type of the block instead of overloaded templates
This removes the problem with the symbol having different types
I am unsure why I didn't use this in the first place. IIRC I had problems with `typeof` when I first tried to use it in the original implementation
* introduces virtual pragma, modifies proc def, prevents proc decl
* marks virtual procs as infix
* forward declare vfuncs inside the typedef
* adds naked callConv to virtual
* virtual proc error if not defined in the same top level scope as the type
* first param is now this. extracts genvirtualheaderproc
* WIP syntax
* supports obj. Removes the need for the prefix
* parameter count starts as this. Cleanup
* clean up
* sem tests
* adds integration tests
* uses constraint to store the virtual content
* introduces genVirtualProcParams
---------
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
* Add `minmax` to sequtils
This adds a `minmax` proc to complement `min` and `max`; it computes
both results in a single pass for efficiency.
* Update lib/pure/collections/sequtils.nim
* Add minmax note to changelog.
---------
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
* adds documentation for `=wasMoved` and `=dup` hooks and small fixes
* Update doc/destructors.md
* Update doc/destructors.md
---------
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
* make reset use the `=destroy` and `waMoved` pair
* fixes a space
* fixes `shrink` instead
* tiny fix
* fixes vm
* suppress the annotations since it breaks some important packages
* fix/workaround for nimrtl and nimhcr on arc/orc
fixes#21803
* try fix clang, debug linux failure
* just make duplicated procs not rtl
* actual fix for duplicated procs
* Refactor and optimize cellseqs_v2 in Nim standard library
* Extract resizing logic into a separate 'resize' procedure for better readability and separation of concerns
* Implement realloc for non-threaded cases to improve memory operations efficiency
* Use ',' instead of ';' between parameters in 'add' procedure for consistency with other Nim code
* Respond to Araq's feedback: Refactor resize function to use reallocShared
This commit replaces the usage of allocShared and deallocShared with reallocShared to optimize memory allocation and deallocation while resizing the CellSeq.
Refactor and improve readability of CellSeq in system directory
* Use half-open range in the contains procedure for better readability and to avoid potential off-by-one errors
* Extract resizing logic from add procedure into a separate resize procedure for better code readability and separation of concerns
* test some Token refactors
* fix CI
* showcase for more reductions, will revert
* Revert "showcase for more reductions, will revert"
This reverts commit 5ba48591f4.
* make line and column int32
* remove int32 change
refs #19822
Fixes these bugs:
* Style check violations in generics defined in foreign packages are raised.
* Builtin pragma usage style check violations in foreign packages are raised.
* User pragma definition style check violations are not raised.
Co-authored-by: quantimnot <quantimnot@users.noreply.github.com>
* fixes#21704; remove `nfIsRef` for genLit
* remove nfIsRef from the output of macros
* make the logic better
* try again
* act together
* excl nfIsRef
* always force open generic dot field symbols?
fixes#21724 but might break code
* alternative, should fix CI
* other alternative, add test for previous CI failure
* not needed
* make sure call doesn't compile too
* ok actual second test
* ok final actual correct test
* apply performance idea
* don't make fromDotExpr static
* refactoring in preparation for better, simpler name mangling that works with IC flawlessly
* use new disamb field
* see if this makes tests green
* make tests green again
* fix iterator equality + add test also for procs
fixes#21706
* all targets
* and isNil and repr
* separate overloads, fix sameType
* more restricted sameType?
* merge overloads again??
* remove sametype change for now
* fix sameType anyway (CI failure was not related)
---------
Co-authored-by: ringabout <43030857+ringabout@users.noreply.github.com>
* alias syntax fixes, improvements and tests
* even better, cannot use alias syntax with generics
* more type tests, improve comment
* fix again
* consistent error message + make t5167_5 work
* more comments, remove {.noalias.}
* fixes#21540; deref block at transf phase to make injectdestructors function properly
* add a test case
* add one more test
* fixes the type of block
* transform block
* test implicitly huge set types
refs https://github.com/nim-lang/RFCs/issues/298
* oh my god
* boot at least
* don't error, fix remaining issues, no 2 len arrays
* fix runnable example
* test assuming 0..255 for int literal
* test refactor, add changelog, test
* test not restricting custom pragma applied symbols
fixes#21652
* fix other test
* different patch
* fix tests
* actually test #18212 and other routines
* test fix#16546#16548 + another issue
* please don't tell me other packages do this
* fix CI + test typeclass callconv pragma
* better logic in parser
* docs and changelog
This is more Markdown-ish way to fix issue #21055, then PR #21625.
It does not enable RST definition lists, instead it makes
adding additional indentation (less than 4) right after a paragraph
be ignored, as it's done for all block elements in Markdown.
(In this case this tenet is applied to option lists that are not
part of CommonMark spec by themselves).
In POSIX Base Definitions Section 8.1 Environment Variable Definition,
it is explained that the `COLUMNS` and `LINES` environment variables,
if present, take precedence over any other implementation-defined method
to determine the terminal size. This is useful, for example, to capture
output programmatically in simulations for various terminal sizes.
* std/bitops: Add explicit type masking for the JS target
Typecasts on the JavaScript backend do not function the same way as they
do on C and C++ backends, so for bitwise operations we may need to mask them
back down into their allowed range when they get shifted outside it.
Since they do work as expected on the other backends, a default bitmask
of all 1's is casted down into the target type as an easily optimizable
"& 0xFF" operation for these backends.
* Fixup: this should still be a func
* Run test case on js target
* Adapt testcase to contributor guide and best practices
* Simplify constrain logic and turn into actual no-op for the C side
This fixes a regression introduced in #20990 . When a group referencing
is used and one of the overloaded symbols is in `include`d file, then
`nim doc` crashes. The fix is in distinguishing (the index of) module
and file where the symbol is defined, and using only module as the
key in hash table for group referencing.
* document general use of `_`, error message, fixes
fixes#20687, fixes#21435
Documentation and changelog updated to clarify new universal behavior
of `_`. Also new error message for attempting to use `_`, new tests,
and fixes with overloadable symbols and
implicit generics.
* add test for #21435
* tuple unpacking for vars as just sugar, allowing nesting
* set temp symbol AST
* hopeful fix some issues, add test for #19364
* always use temp for consts
* document, fix small issue
* fix manual indentation
* actually fix manual
* use helper proc
* don't resem temp tuple assignment
`len` could contain side effects and may result in different values when
substituted twice in the template expansion. Instead, capture the result
of substituting `len` once.
closes: #21538
* Add a test case
There are way more test cases (See all branches of analyseIfAddressTaken but this covers at least a second branch
* Port analyseIfAddressTaken from semexprs to sigmatch
This was done since we cannot import sem or semexprs (circular import) but we need the rest of the logic. In needs to be done here since the converter isn't semmed afterwards and so we can't just leave the process til later use the version from semexprs
* Less hacky solution which has the checking be done in analyseIfAddressTakenInCall
This was done instead of the recommendation on removing it since sfAddrTaken is used in places other than the backend
* Remove weird whitespace
* Still check nkHiddenAddr if we are checking a converter
* Fix custom objects, fix handling of nil variables
* Rename because lldb complains about dashes in filename
* Add example of how to use custom type formatting from Nim
* Add synthetic objects with dynamic fields and add an example
* fix#18977 disallow change branch of an object variant in ORC
* check errors for goto exception
* fixes conditions
* fixes tests
* add a test case for #18977
* fixes#21306; don't transform yields in the var section when introducing new local vars
* adds `inVarSection` so the var section in the var section is freshed
* use `isIntroducingNewLocalVars` to avoid yield transformations in var sections
* fixes comments
* fixes#21023; Segfault when mixing seqs, orc, variants and futures
* fixes none of the branches were explicitly selected
* add one more test
* one more test
* finish issue #21474: a better message if dot is not found locally when using gendepend
* fix a typo in compiler
* trim empty path reported in `findNodeJs`
* compiler/main.nim: switch raise to simply quit
* Remove Defect from raises list
Since defects aren't tracked anymore this causes a hint to pop up mentioning it
* Still track Defect when getting ran with an older Nim version
The raises followed a pattern so moving them into a pragma didn't seem to cause any extra problems
* Make pickBestCandidate store syms
* Remove useless cursor
* Try making pickBestCandidate more readable
* Fix advance order
* Revert back to seq with lots of comments
---------
Co-authored-by: SirOlaf <>
a warning message been added to the documentation to remind users that the timeout parameter is expressed in milliseconds, not seconds. to help prevent confusion and unexpected behaviours.
* fixes#20139; hash types based on its path relative its project
* add a test case
* fixes procs
* better implementation and test case
---------
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
* fixes#21326; getAst uses type info to annotateType quoted variables
* simplify logics; sem types first
* fixes important packages
* add testcases
* tiny
* fixes#10938; always initialize global variable in VM
* fixes importc vars
* there is a pre-existing issue regarding closure types in the VM
* add tests
Add mention of breaking change to changelog
As described by #21435 , generic proc declarations making use of `_` as generic
parameter are no longer possible. This is a change that was introduced by
#21192 . During the debate over if this should be part of the intended spec in
#21435 we concluded that it is and thus should be mentioned as a breaking
change in the changelogs.
* Fix: make nintendoswitch someGcc, remove symlink support for nintendoswitch, add getAppFilename for nintendoswitch
* Fix: use getApplHeuristic on nintendoswitch
* fixes#19795; remove parse pipeline
* isScript
* fixes nimscriptapi
* don't touch reorder
* check script
* fixes tests
* it seems implicit imports of system cause troubles
* access the first child of `nkStmtList`
* ignore comments
* minor messages
* perhaps increases hloLoopDetector
* the module is a stmtList, which changes the errors
* fixes nimdoc
* fixes tlinter
* fixes nim secret tests
* fixes arc_misc
* fixes nim secret tests again
* safe; fixes one more test
* GlobalError is the root cause too
* fixes parsing errors
* put emit types to the cfsForwardTypes section
* fixes#11852; `{.push checks:off}` now works in procs
* disable navigator
* fixes nimdoc
* add tests for JS
* fixes nimsuggest
ioselectors: ioselectors_epoll: for NuttX, limit initial numFD to configured value.
In the NuttX build config, there is a setting called "FS_NEPOLL_DESCRIPTORS".
--------
config FS_NEPOLL_DESCRIPTORS
int "Maximum number of default epoll descriptors for epoll_create1(2)"
default 8
---help---
The maximum number of default epoll descriptors for epoll_create1(2)
--------
For NuttX, change the number of fd arrays allocated by newSelector() to that value.
Signed-off-by: Takeyoshi Kikuchi <kikuchi@centurysys.co.jp>
* Add test case
* closes#21247 Add the sfAddrTaken flag to var parameters in converters
This allows the JS backend to properly pass the parameter as a fat pointer
I have seen these questions: "Why I got an invalid module name errors?". To eliminate this kind of questions, We might improve th error messages. Though, the question might evolve into "What is a valid Nim identifier", which should be more searchable on the Internet.
* Add support for orc strings
* Cleaned up testing script
Enums now printing properly
Merged both old and new strings into the one printer
Moving onto sets which seem kinda difficult
* Sets working
Instead of trying to imitate how Nim represents enums, I just call the dollar proc for each enum value
While this runs into problems if the user doesn't call the dollar proc anywhere, I believe its a decent tradeoff
I've cleaned up the error message for when it cannot find dollar proc (Might add in proper message on how to fix)
* Support sequences
V2 runtime seems to have sequences that don't have a len (Guessing its some kind of short seq optimisation?) but I've rolled
the implementation into normal sequences since the implementation is practically the same
* Clean up test program so it isn't using diff
Also don't redirect the first nim compile to /dev/null so that we can check for any compilation errors
I found the diff to be annoying to read (Seeing as the test script already performs diffing)
* Tables are now supported
* Add colours to test output
It was getting difficult to tell apart test output from GDB output so I added colour to better tell them apart
* Both old and new runtime are working
Set exit code in python test script so that this could possibly be added to the CI. Only issue is that it can be flaky (GDB crashes randomly for some reason)
* Remove old code that was commented out
If I need it later I'll just use git
* Remove branch that never runs
* Remove the old test output [skip ci]
* Add general purpose `setFileSize` (unexported for now). Use to simplify
`memfiles.open` as well as make robust (via hard allocation, not merely
`ftruncate` address space allocation) on systems with `posix_fallocate`.
As part of this, fix a bad `closeHandle` return check bug on Windows and
add `MemFile.resize` for Windows now that setFileSize makes that easier.
* Adapt existing test to exercise newly portable `MemFile.resize`.
* Since Apple has never provided `posix_fallocate`, provide a fallback.
This is presently written in terms of `ftruncate`, but it can be
improved to use `F_PREALLOCATE` instead, as mentioned in a comment.
* This adds `parseutils.parseSize`, an inverse to `strutils.formatSize`
which has existed since 2017.
It is useful for parsing the compiler's own output logs (like SuccessX)
or many other scenarios where "human readable" units have been chosen.
The doc comment and tests explain accepted syntax in detail.
Big units lead to small numbers, often with a fractional part, but we
parse into an `int64` since that is what `formatSize` stringifies and
this is an inverse over partial function slots. Although metric
prefixes z & y for zettabyte & yottabyte are accepted, these will
saturate the result at `int64.high` unless the qualified number is a
small fraction. This should not be much of a problem until such sizes
are common (at which point another overload with the parse result
either `float64` or `int128` could be added).
Tests avoids `test()` because of a weakly related static: test() failure
as mentioned in https://github.com/nim-lang/Nim/pull/21325. This is a
more elemental VM failure. As such, it needs its own failure exhibition
issue that is a smaller test case. (I am working on that, but unless
there is a burning need to `parseSize` at compile-time before run-time
it need not hold up this PR.)
* This worked with `int` but fails with `int64`. Try for green tests.
* Lift 2-result matching into a `checkParseSize` template and format as a
table of input & 2 expected outputs which seems nicer and to address
https://github.com/nim-lang/Nim/pull/21349#pullrequestreview-1294407679
* Fix (probably) the i386 trouble by using `int64` consistently.
* Improve documentation by mentioning saturation.
* Improve documentation with `runnableExamples` and a little more detail in
the main doc comment based on excellent code review by @juancarlospaco:
https://github.com/nim-lang/Nim/pull/21349#pullrequestreview-1294564155
* Address some more @juancarlospaco code review concerns.
* Remove a stray space.
* Mention milli-bytes in docs to maybe help clarify why wild conventions
are so prone to going case-insensitive-metric.
* Add some parens.
* Add test cases
* Implement contains for CacheSeq
* Implement contains for CacheTable
* Fix implementation of hasKey
* Remove contains for CacheSeq
Fix runnable examples
I was accidently using --doccmd:skip so I didn't spot the failure locally
* Implement hasKey as a VM callback instead of magic
* Implement suggestions from PR
Co-Authored-By: ringabout <ringabout@users.noreply.github.com>
* Update lib/core/macrocache.nim
---------
Co-authored-by: ringabout <ringabout@users.noreply.github.com>
Co-authored-by: ringabout <43030857+ringabout@users.noreply.github.com>
* suppresses non-exported fields of types and adds command-line option to re-enable this if desired
* corrected the doctest that produced a CI error
* an embarrassingly bad error in reasoning
* modified a nimdoc test to reflect updated behavior
* needed another change to bring utils.html doctest in sync with update
* add info
* fix nimdoc
* lint
* render postfix
* fixes a problem
* fixes nimdoc
* fix nimdoc
---------
Co-authored-by: johnperry-math <john.perry@usm.edu>
Co-authored-by: johnperry-math <devotus@yahoo.com>
Revert "Fix #13093 C++ Atomics: operator= is implicitly deleted because the default definition would be ill-formed (#21169)"
This reverts commit a7bae919ad.
* Implemented level based macro expand functionality
- it can handle single macro call or expand whole function/proc/etc and it
- In addition, I have altered the parser to provide the endInfo for the node.
The usefulness of the `endInfo` is not limited to the `expandMacro`
functionality but also it is useful for `ideOutline` functionality and I have
altered the ideOutline functionality to use `endInfo`. Note `endInfo` most of
the time is lost during the AST transformation thus in `nimsuggest.nim` I am
using freshly parsed tree to get the location information.
* Make sure we stop expanding correctly
* Test CI
* Fix tv3_outline.nim
* Add docs informing about gotcha of clients
It is a hidden problem that AsyncHttpClient-instances *can not* deal with multiple requests at once.
Similar to normal HttpClients they can only deal with sending one request at a time.
This is not told anywhere in the documentation, but critical information that should be available to the user.
* Update lib/pure/httpclient.nim
fixes typo
Co-authored-by: ringabout <43030857+ringabout@users.noreply.github.com>
Co-authored-by: ringabout <43030857+ringabout@users.noreply.github.com>
* Merge devel
Add another test case
* Fix test
Use getCustomPragmaVal instead of hasCustomPragma
Co-authored-by: Clay Sweetser <Varriount@users.noreply.github.com>
parseopt.nim documentation clarity
Added example for default values to cmd line parameters.
Additionally, added lines in getopt documentation about case switching still requiring the `cmdEnd` kind. Hopefully this clears up any vagueness for those following along in the example but omitting the `cmdEnd` in the case because the documentation said it wasn't needed.
* underscores for routine parameters
fixes#13443, fixes#13804, refs #21121
* add changelog + more tests
* support generics and ensure inferred lambdas work
* docgen: implement cross-document links
Fully implements https://github.com/nim-lang/RFCs/issues/125
Follow-up of: https://github.com/nim-lang/Nim/pull/18642 (for internal links)
and https://github.com/nim-lang/Nim/issues/20127.
Overview
--------
Explicit import-like directive is required, called `.. importdoc::`.
(the syntax is % RST, Markdown will use it for a while).
Then one can reference any symbols/headings/anchors, as if they
were in the local file (but they will be prefixed with a module name
or markup document in link text).
It's possible to reference anything from anywhere (any direction
in `.nim`/`.md`/`.rst` files).
See `doc/docgen.md` for full description.
Working is based on `.idx` files, hence one needs to generate
all `.idx` beforehand. A dedicated option `--index:only` is introduced
(and a separate stage for `--index:only` is added to `kochdocs.nim`).
Performance note
----------------
Full run for `./koch docs` now takes 185% of the time before this PR.
(After: 315 s, before: 170 s on my PC).
All the time seems to be spent on `--index:only` run, which takes
almost as much (85%) of normal doc run -- it seems that most time
is spent on file parsing, turning off HTML generation phase has not
helped much.
(One could avoid it by specifying list of files that can be referenced
and pre-processing only them. But it can become error-prone and I assume
that these linke will be **everywhere** in the repository anyway,
especially considering https://github.com/nim-lang/RFCs/issues/478.
So every `.nim`/`.md` file is processed for `.idx` first).
But that's all without significant part of repository converted to
cross-module auto links. To estimate impact I checked the time for
`doc`ing a few files (after all indexes have been generated), and
everywhere difference was **negligible**.
E.g. for `lib/std/private/osfiles.nim` that `importdoc`s large
`os.idx` and hence should have been a case with relatively large
performance impact, but:
* After: 0.59 s.
* Before: 0.59 s.
So Nim compiler works so slow that doc part basically does not matter :-)
Testing
-------
1) added `extlinks` test to `nimdoc/`
2) checked that `theindex.html` is still correct
2) fixed broken auto-links for modules that were derived from `os.nim`
by adding appropriate ``importdoc``
Implementation note
-------------------
Parsing and formating of `.idx` entries is moved into a dedicated
`rstidx.nim` module from `rstgen.nim`.
`.idx` file format changed:
* fields are not escaped in most cases because we need original
strings for referencing, not HTML ones
(the exception is linkTitle for titles and headings).
Escaping happens later -- on the stage of `rstgen` buildIndex, etc.
* all lines have fixed number of columns 6
* added discriminator tag as a first column,
it always allows distinguish Nim/markup entries, titles/headings, etc.
`rstgen` does not rely any more (in most cases) on ad-hoc logic
to determine what type each entry is.
* there is now always a title entry added at the first line.
* add a line number as 6th column
* linkTitle (4th) column has a different format: before it was like
`module: funcName()`, now it's `proc funcName()`.
(This format is also propagated to `theindex.html` and search results,
I kept it that way since I like it more though it's discussible.)
This column is what used for Nim symbols resolution.
* also changed details on column format for headings and titles:
"keyword" is original, "linkTitle" is HTML one
* fix paths on Windows + more clear code
* Update compiler/docgen.nim
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
* Handle .md and .nim paths uniformly in findRefFile
* handle titles better + more comments
* don't allow markup overwrite index title for .nim files
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
tlsEmulation:on under NetBSD-10Beta and NetBSD-current produces an executable which crashes immediately as follows:
Core was generated by `koch'.
Program terminated with signal SIGSEGV, Segmentation fault.
#0 0x000000000047b4c2 in nimZeroMem ()
(gdb) bt
#0 0x000000000047b4c2 in nimZeroMem ()
#1 0x00000000004897b2 in threadVarAlloc__system_2162 ()
#2 0x000000000048980e in initThreadVarsEmulation ()
#3 0x0000000000489848 in PreMain ()
#4 0x000000000048986a in NimMain ()
#5 0x00000000004898a9 in main ()
I can't speak about the other BSDs.
* avoiding allocating an unnecessary byte for IPv4
The inet.h file uses 16 as the string in C needs the last null byte
1b929c02af/include/linux/inet.h (L49)
However, strings in Nim do not need this. So one byte is being allocated unnecessary and will never be used.
* avoid unnecessary allocation in IPv6 dollar
It is currently allocating 48 bytes. However, the Nim implementation for IPv6 will print a maximum of 39 characters. Nim does not implement IPv6 "0000:0000:0000:0000:0000:ffff:255.255.255.255" (45 characters) nor "0000:0000:0000:0000:0000:ffff:255.255.255.255%3" (47 characters).
The indication in inet.h for 48 is due to the maximum use of 47 characters of a C string that needs a null byte at the end. So 48.
1b929c02af/include/linux/inet.h (L50)
* Track seen module graphs so symbols from the same module aren't repeated
Add test case
* Track symbols instead of modules
* Don't show duplicate symbols in spell checker
Removes the declared location from the message. Since we don't show duplicates anymore it would be a bit misleading if we only show the location for the first declaration of the symbol
* [change] add/insert/delete family of xmltree expanded with several variations. Added replace methods family
* [change] Lifted child limitations on insert methods (consulted with @araq)
* [tests] add/insert/replace/delete of xmltree XmlNodes tests added
* Add test
* Check file exists before adding it into compilation
* Make error message look like other error messages
i.e. following the format `error msg: file`
* Name iterators something human readable
Remove intermediate async procs from stacktraces
Clean async traceback message from reraises message
* Remove unused import/variable
* Fix failing tests
Don't add {.stackTrace: off.} to anonymous procs (They already don't appear in stacktrace)
* Fix failing tests in pragma category
Now check that the nim is a routine type first so we don't run into any assertion defects
* Hide stack trace pragma in docs and update doc tests
User doesn't need to know if something won't appear so this more becomes verbose noise
If this is a bad idea we can always add a `when defined(nimdoc)` switch so we don't add {.stackTrace: off.} to the Future[T] returning proc for docs
* Parse the new line format
* Fix pattern
Didn't have space after the path
* Remove duplicate sources
Sources would sometimes double up with a new line at the end
* Remove unused variable
* Refactor sourcemap.nim
Removes the multiple translations needed, now goes from single high level type to the final SourceMap
Adds documentation for procs
* Line numbers line up properly now
Files aren't linking correctly though
* Files now link up correctly
Lines are sometimes off but overall seems pretty good
Just need to implement parser
* Add column info to output
Add sourceMappingURL to rope directly to prevent copy
* Properly handle columns
* Remove debug lines
* Add testcase
* Finish testcase
* Use the outdir folder instead of the folder the test is in to find the sourcemap
Co-authored-by: ringabout <43030857+ringabout@users.noreply.github.com>
* fixes#21043; fixes a named exception in the infixAs expression which generate an implicit uninitialized let statement
* Update compiler/sempass2.nim
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
* work around chronos
chronos has tests against the devel branch, it will be eventually fine.
* Apply suggestions from code review
* Update testament/important_packages.nim
* Trying to fix by changing renderer
* add renderExpandUsing flag
This flag makes the renderer expand parameters that use using statement to have their full type
* Update docs
* Make comment better explain why checking for nkSym
* Fix nil access when macro/template has parameter with no type
* Fix nil access when node is not semmed yet
* change `include genode/env` to an import
ref 0b262e9496 (diff-8718bd20d8f61d6638d3d64b19efc31bcd40a6d5be8215b2a1f0b75ed93e8d56)
* fixes comments
* ship a modern nimble with lock files support
* not sure whether the latest nimble has a regression
now I'm trying 0.14.0
* change `pkgs` to `pkgs2` (#21073)
* overwrite problematic packages
* Apply suggestions from code review
* Apply suggestions from code review
* Apply suggestions from code review
* alternative, much simpler algorithm for strict func checking
* forgot to git add new compiler module
* new spec is incredibly simple to describe
* fixes bigints regression
* typos
* closes#16305; closes#17387; closes#20863
* fix#16758 Nim crashes in fixAbstractType
* Update compiler/semexprs.nim
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
* Implicit return working for asyncdispatch proc
Closes#11558
* Test case
* Test that return value is actually used
* Update tests/async/t11558.nim
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
* fix issue #20922 by handling missing expr in `exprList` for `tkOf`
* fix line numbers in test case
* rewrite exprList requiring expr, add optionalExprList for except
As suggested by @metagn.
* update test case to reflect new code
* update grammar.txt
* update line numbers in test case taking into account nimout
Given the number of errors that are produced it seems easier to do it
this way instead of using `tt.Error`.
* Breaking parser changes, implement https://github.com/nim-lang/RFCs/issues/442
Types are separated from expressions and better reflected in the grammar.
* add test
* more accurate grammar
* fix keyword typedescs
* accept expressions in proc argument lists
* CI "fixes"
* fixes
* allow full ref expressions again, adapt old tests
* cleanup, fix some tests
* improve grammar, try and revert semtypes change
* restrict sigil binding to identOrLiteral
* fix, should have caught this immediately
* add changelog entry, fix double not nil bug
* correct grammar
* change section
* fix
* real fix hopefully
* fix test
* support LL(1) for tuples
* make grammar.txt too
* draft for let daa
* patch
* fixes bugs
* errors for global let variable reassignments
* checkpoint
* out param accepts let
* add more tests
* add documentation
* merge tests
* test disable do: block lambda lifting
* fix last test [skip ci]
* deprecate `do:` meaning `do ():` + misc cleanup
closes https://github.com/nim-lang/RFCs/issues/486
* oops
* fix
* no idea what could be causing nimsuggest failure other than this
* ensure ci works
* better procvar ambiguity errors, clean up after #20457fixes#6359, fixes#13849
* only trigger on closedsymchoice again
* new approach
* add manual entry for ambiguous enums too
* add indent [skip ci]
* move to proc
* Add comments on CPU arch detection
* Support HPPA/hppa/parisc64 CPU architecture
* Support sparc64 CPU architecture
* Update tools/niminst/makefile.nimf
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
* better error messages for dot operators [backport]
fixes#13063
* also fixes#7777
* fix#6981 and #9831 too
* fix
* minor improvement
* sus test fixes
* make test multiplatform lol
* fix nimsuggest test, extra improvements
* Remove confusing "ppc" block
The PowerPC arch is called "powerpc" in platforms.nim
The makefile shipped in release 1.6.10 populates the oFiles variable when myos=linux and mycpu=powerpc
mycpu=ppc instead leads to ``no C code generated for: [linux: ppc]. Stop``
* Handle ucpu=ppc
* fix =#13790 ptr char (+friends) should not implicitly convert to cstring
* Apply suggestions from code review
* first round; compiles on windows
* nimPreviewSlimSystem
* conversion is unsafe, cast needed
* fixes more tests
* fixes asyncnet
* another try another error
* last one
* true
* one more
* why bugs didn't show at once
* add `nimPreviewCstringConversion` switch
* typo
Co-authored-by: xflywind <43030857+xflywind@users.noreply.github.com>
* unnamed break in the block now gives an error
* bootstrap
* fixes
* more fixes
* break with label
* label again
* one moee
* Delete test5.txt
* it now gives a UnnamedBreak warning
* change the URL of bump back to the original one
* test azure
* use exit 1
* try again
* use useSysAssert
* disable i386
* use refc for tlsEmulation on i386
* use refc
* disable i386
Co-authored-by: Clay Sweetser <Varriount@users.noreply.github.com>
* fix =#13790 ptr char (+friends) should not implicitly convert to cstring
* Apply suggestions from code review
* first round; compiles on windows
* nimPreviewSlimSystem
* conversion is unsafe, cast needed
* fixes more tests
* fixes asyncnet
* another try another error
* last one
* true
* one more
* why bugs didn't show at once
* add `nimPreviewCstringConversion` switch
* typo
* fixes ptr to cstring warnings[backport]
* add fixes
Co-authored-by: xflywind <43030857+xflywind@users.noreply.github.com>
* Add flushThreshold to std/logging loggers
* Remove duplicate field
* Add -d:nimFlushAllLogs for changing default flush behavior globally
* Add changelog entry for log flushing change
* Flush all log levels by default in Nim v2
* [sugar] handle HiddenDeref in capture, error at CT if unsupported nnk
Instead of running into trouble of the `.strVal` access failing, it's
better to error at CT.
* [tests] remove unnecessary import in test case
* improve ident extraction & extend test cases
* [tests] improve tests for `capture` of different types & act. check
* fixes documentation regression and a bit clean up
follow up https://github.com/nim-lang/Nim/pull/20371
* Apply suggestions from code review
* Apply suggestions from code review
* fixes#20746; remove string copies for ORC booted compiler
* add a test case
* use `cursor` thanks to @beef331
* for old compilers
* change file extension
* change test cases
* fixes regression #17121; adding doc comment in importc proc makes it silently noop at CT
* Update compiler/vmgen.nim
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
* quit value gets saturated to ranges
* add documentation
* minimal changes
* refactor
* small fix
* add documentation
* fixes
* Update lib/system.nim
Co-authored-by: Juan Carlos <juancarlospaco@gmail.com>
Co-authored-by: Juan Carlos <juancarlospaco@gmail.com>
* fix posix.mq_receive compilation with cpp backend
* only enable runnableExample on posix
* linux, not posix
* simplify example
* add test
* mqueue.h does not exist on MacOS
* place test case in own block
* drop runnableExamples
* Improve dollar
* Improve dollar
* Simplify, remove 1 if in for loop
* ci
* Update lib/pure/net.nim
* Update lib/pure/net.nim
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
* fix semcase on tySequence and tyObject #20283#19682
* use better arg name
* avoiding returns nil use errorNode instead, clean code
* use efNoDiagnostics flag
* remove tests/errmsgs/t19682.nim
* combine 2 test cases to one file
* Genode: add native signal handler
* Genode: add scheduleCallbacks to asyncdispatch
This resolves some awkwardness where an RPC server may or may not
use callSoon while dispatching RPC but without scheduling timers
or I/O.
fix closure iter state table init type
It is a well-known fact that using closed intervals for ranges is
logically, objectively and eternally wrong, as evidenced by this
off-by-one.
* Revert "Add OpenSSL 3 support (#19814)"
This reverts commit 2dcfd73260.
* openssl 3 support no longer opt in + some 1.0 support
* hopefully fix
* maybe fix
* final attempt
* actual fix hopefully
* Silence warning false positive for int128.nim: Warning: target type is larger than source type
* Silence warning false positive for int128.nim: Warning: target type is larger than source type
* https://github.com/nim-lang/Nim/pull/20666#discussion_r1006162835
* Added openarray[char] overloads to std/unicode
Call substr instead of index slice inside unicode
Added substr overload for openarray for parity with string functionality
Made style checker happies and fixed overloads for substr
* Added update to changelog [skip ci]
* Inline unicode string operations
* Moved substr overload to unicode
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
* Added 'openarray[char]' overloads to 'std/parseutils'
* Removed redundant `start` and `last` params from slice using procs
* Fixed type for parseIdent overload
* fixed one by off with 'substr'
* removed missed start parameters for procedures
* Added 'openarray[char]' overloads to 'std/parseutils'
* Removed redundant `start` and `last` params from slice using procs
* Fixed type for parseIdent overload
* fixed one by off with 'substr'
* removed missed start parameters for procedures
* Fixed VM op to work with new 'opcSlice'
* Corrected captureBetween's logic to work with openarray
* js sys's parsefloat logic now uses openarray
Co-authored-by: Clay Sweetser <Varriount@users.noreply.github.com>
* Add test for tuple being invalid size
* Test tuple size before accessing fields
* Fix formatting for import
* Fix not being able to build from csources_v1
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
* Added tests
* Fix expected string
* Allow hooks to take an optional parameter that is the current options
* Add options to hooks for other generic types
* Fix doc links
* Implemented opcSlice to make 'toOpenArray' work on the VM
* Added nkOpenArray for VM to reduce bodgeness
* Fixed range issues and erraneous comments
* Range check correctly for openArrays in opcLdArr
* Inverted logic for ldArr checking
* vm now supports slicing strings
* Added string tests
* Removed usage of 'nkOpenArray' and redundant operations
* Refactored vmSlice implementation, removing redundant and incorrect code
* Made tuples go throw opcWrObj for field assignment
* All strkinds should be considered for openarrays
* Handle nkOpenSymChoice for nkAccQuoted in considerQuotedIdent
* Add test
* Update compiler/lookups.nim
Co-authored-by: SirOlaf <a>
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
* Make rstgen work with gcsafe
Co-authored-by: Danil Yarantsev <tiberiumk12@gmail.com>
* add tests and fixes
* if nimHasWarningAsError
Co-authored-by: Danil Yarantsev <tiberiumk12@gmail.com>
* allocator: catch up with multi-threading techniques
* removed the global thread lock
* more atomics for fun and profit
* added important sysAssert
* stats remain thread local and don't have to be atomic
* undo split chunk optimizations in the hope it makes the CI happy
* FTP client is now able to connect to server over TLS by set `useTls = true` in newAsyncFtpClient proc
* Update asyncftpclient.nim
* fix CI
* shouldn't use {.error.}
* Update lib/pure/asyncftpclient.nim
Co-authored-by: flywind <xzsflywind@gmail.com>
Co-authored-by: ringabout <43030857+ringabout@users.noreply.github.com>
Co-authored-by: Clay Sweetser <Varriount@users.noreply.github.com>
* Fix/improve handling of forward declarations in nimsuggest
- ideUse now works fine when invoked on the implementation
- implemented ideDeclaration to make cover lsp feature textDocument/declaration
- fixed performance issue related to deduplicating symbols. Now the
deduplication happens after the symbols are filtered. As a alternative we might
change the way cached symbols are stored(e. g. use set).
- I also fixed the way globalSymbols work. Now it will sort the responses based
on the match location to make sure that the results are sorted in user friendly way.
* Update nimsuggest/nimsuggest.nim
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
* Implement Markdown indented code blocks
Additional indentation of 4 spaces makes a block an "indented code block"
(monospaced text without syntax highlighting).
Also `::` RST syntax for code blocks is disabled.
So instead of
```rst
see::
Some code
```
the code block should be written as
```markdown
see:
Some code
```
* Migrate RST literal blocks :: to Markdown's ones
The strutils `delete` func with signature
func delete*(s: var string, first, last: int)
was deprecated in adba5eb45e, in favor of one with signature
func delete*(s: var string, slice: Slice[int])
However, a few procedures still used the deprecated form. This commit
updates them, resolving these deprecation warnings:
rstgen.nim(766, 12) Warning: use `delete(s, first..last)`; delete is deprecated [Deprecated]
strutils.nim(1651, 19) Warning: use `delete(s, first..last)`; delete is deprecated [Deprecated]
strutils.nim(1679, 7) Warning: use `delete(s, first..last)`; delete is deprecated [Deprecated]
strutils.nim(2472, 7) Warning: use `delete(s, first..last)`; delete is deprecated [Deprecated]
Before this commit:
- `trimZeros` called `s.delete(i+1, i)` for an input that lacks a
trailing zero (like "1.23").
- `removePrefix*(s: var string, prefix: string)` called
`s.delete(0, -1)` when the prefix was the empty string.
which did not modify `s`, nor raise an error. But the newer slice
`delete` raises an `IndexDefect` when the start of the slice is greater
than the end, so we avoid calling the new `delete` for such a case.
Recall that exceptions inheriting from `system.Defect` are not tracked
with the `.raises: []` exception tracking mechanism [1], so this commit
does not break existing code like:
proc foo {.raises: [].} =
var s = "abc1.20"
s.removePrefix("abc")
s.trimZeros()
doAssert s == "1.2"
The `strutils.delete` deprecation was motivated by a problem with
`system.delete` [2][3]:
`system.delete` had surprising behavior when the index passed to it
was out of bounds (it would delete the last entry then). Compile
with `-d:nimStrictDelete` so that an index error is produced
instead.
Be aware however that your code might depend on this quirky behavior
so a review process is required on your part before you can use
`-d:nimStrictDelete`. To make this review easier, use the
`-d:nimAuditDelete` switch, which pretends that `system.delete` is
deprecated so that it is easier to see where it was used in your
code.
`-d:nimStrictDelete` will become the default in upcoming versions.
A similar deprecation happened with `sequtils.delete` [4], but that
deprecated form is already not used in this repo.
[1] https://github.com/nim-lang/Nim/blob/2dec69fe5aa6/doc/manual.md#exception-tracking
[2] https://github.com/nim-lang/Nim/blob/2dec69fe5aa6/changelogs/changelog_1_6_0.md#system
[3] https://github.com/nim-lang/Nim/commit/92cb76571432
[4] https://github.com/nim-lang/Nim/commit/1d6863a7899f
* fixes#19231; newFinalize doesn't work with ORC
first make it pass tests
* remove the tables dep
creates a binding for finalized procs in order to handle the same symbols. It used to wrongly generat a new symbol id for the same symbol as the encountered one before
* refactor and revert #14257
* de indentation
* fixes tests; uses instantiated types
* pragma for sfCallsite instead of name check at every template definition
Not documented because it seems to be for internal use?
Should also make it possible to make comparisons and setops imports, but this doesn't have to be done.
I can reuse a name like `cursor` for the pragma as well, added a new name just to be safe.
* make sfCallsite recursive, add tests
* fix#19678 Broken behavior with string ranges in case labels
* Update compiler/semtypes.nim
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
* system refactor, move out 600 lines
* compilation, slice, backwardsindex, misc_num moved out of system
* some procs/types moved into arithmetics, basic_types
* system no longer depends on syncio
* some procs moved around to fit with their surroundings
* make exceptions an import, old ops to misc_num
* move instantiationInfo back
* move back nim version, fix windows echo
* include compilation
* better docs for imported modules, fix unsigned ops
also remove ze, ze64, toU8, toU16, toU32 with nimPreviewSlimSystem
* fix terminal
* workaround IC test & weird csize bug, changelog
* move NimMajor etc back to compilation, rebase for CI
* try ic fix
* form single `indices`, slim out TaintedString, try fix IC
* fix CI, update changelog, addQuitProc
* fix CI
* try fix CI
* actually fix CI finally hopefully
* Update lib/system/compilation.nim
Co-authored-by: ringabout <43030857+ringabout@users.noreply.github.com>
* update kochdocs
* hopefully fix csize uses for slimsystem
* fix tquit
Co-authored-by: ringabout <43030857+ringabout@users.noreply.github.com>
* fixes#19401; fixes#19402; rework Forward declaration and finalizer for ORC
* add more tests
* give it a name
* make more tests
* fixes tests
* hidden addr for cpp
* move code to a function
* make more standard libraries work with `nimPreviewSlimSystem`
* typo
* part two
* Delete specutils.nim
* fixes more tests
* more fixes
* fixes tests
* fixes three more tests
* add formatfloat import
* fix
* last
* make it match ccgexprs.nim `isSimpleExpr`
* x in {1, 2}
* r[].x and r.x when r is ref type
* float(x)
Co-authored-by: Clay Sweetser <Varriount@users.noreply.github.com>
* refactorings in preparation for ropes elimination of the C code generator; mostly the usual ': Rope' -> 'result: var Rope' rewrite
* rewrote ccgcalls.nim
* refactored ccgexprs.nim
* ccgliterals: refactoring
* refactoring: code dealing with name mangling
* refactoring: getRecordFieldsAux
* ropes are strings (insert obscene joke here)
* optimize JS code gen
* optimizations and code improvements
* more optimizations
* final cleanups
* bump macOS image on Azure CI to macos-11
##[warning]The macOS-10.15 environment is deprecated, consider switching to macos-11(macos-latest), macos-12 instead. For more details see https://github.com/actions/virtual-environments/issues/5583
* fix CI error
* fixes#20426; remove `maincommand` and `m` options since they are a noop since 2014 and causes confusion
fixes#204267f7b13a45f (diff-d949f8c356fd2dc9ceedc6f3dbbd01e2c806269dd0a8ad6516facf589fa2c99a) makes it a no op, but it causes a regression because it should add `expectArg(switch, arg, pass, info)` before the discard statement. It causes https://github.com/nim-lang/Nim/issues/20426 to happen. Without `expectArg(switch, arg, pass, info)`, `-mm:orc` is wrongly interpreted as `-m` and compiler, which doesn't make sense. It should either abort compilation or prints `argument for command line option expected: '-m'` message. Since they are a no op since 2014, let's remove it to clear the confusion. Let's wait and see whether it breaks something.
* add a changelog
* Optimize `base64.encodeMime`
* 5x faster for common scenarios, 13x faster if `lineLen` <= encoded
string's length or `newLine` is empty.
* Changed `lineLen`'s type to `Positive` to disallow `0`.
* Fix
* Revert "fixes #20285; prevent oid time overflow at year 2038"
This reverts commit dfcdb6ec2a.
* increase time to 64 bits and clean up
* add testcase
* inline consts
* add a changelog
* fixes #20285; prevent oid time overflow at year 2038
* Extract Markdown & Rst doc into separate file
This documentation should be extracted into separate file
as it's user's documentation, which can be used as a separate
utility for compiling `.md/.rst` files.
* Restructure: move markup info into markdown_rst.md
+Markdown link migration
* fix#19882 Improve error message when instantiating generics that lack a type
* Update tests/errmsgs/t19882.nim
Co-authored-by: Clay Sweetser <Varriount@users.noreply.github.com>
* don't run azure on other branches either
refs #20184
Azure is more prone to clogging & it's especially bad with the timeouts (some PRs haven't rebased).
* allow all version- branches
Co-authored-by: Clay Sweetser <Varriount@users.noreply.github.com>
* add closing quote
Co-authored-by: Clay Sweetser <Varriount@users.noreply.github.com>
* fix typos in manual.md
1. remove redundant `(`
1. 'System module' -> 'system module'.
* Update manual.md
"However" is not easy to understand. Suggest changing to the word into "In this version" to make the comparison explicite.
* conservative partial revert of #19814
* fix
* revert tssl
* revert azure CI change
* keep azure, revert version range
* fully revert CI, add changelog
* useOpenssl3 as separate define, .3 is a version
put mOpenArrayToSeq in compile-time evaluation whitelist
(it was mNone before which was whitelisted), homogenize
"ordinal type expected" errors, put overloadable enums
in non-experimental manual
* nimgrep: add `--matchContext` and `--noMatchContext` options
* Rename options for uniformity
* Revise option names, add `--parentPath` options
* Revert --bin deprecation
* Copy-paste an original test from quantimnot
The origin was:
96544656d5/tnimgrep.nim
* Change ! to n
* Attempt to fix test
* Fix test on Windows
* Change --contentsFile -> --inFile, add more tests
* Bump
* Change --parentPath to --dirpath
* Fix cannot create Windows directory in root
Fixes#20306, a regression bug with `createDir` caused by
`23e0160af283bb0bb573a86145e6c1c792780d49`.
The issue is that, if the path consists only of a drive and a single
directory (e.g. "Y:\nimcache2" in the original issue), then no
directories will be created. This works fine if there are multiple
directories (e.g. "Y:\nimcache2\test").
In the case of "Y:\nimcache2", `omitNext` in `createDir` is `false` on
the last condition in `createDir`. This means that the "nimcache2"
directory will not be created, and no exception will be raised.
Fixed by refactoring to use `parentDirs` iterator instead of iterating
over the string characters. Motivation is reduced code complexity.
Will not test the specific "C:\test" `createDir` case, since there is no
standard Windows drive with write permissions in the root. Creating a
custom drive-mapping to Windows Temp is a non-option. That could mess
up some users running the test.
Added `parentDirs` tests since they are lacking on for POSIX paths.
* Fix `createDir("")` causing error
The change to `createDir` caused `createDir("")` to raise an error,
where it previously didn't. Fixed so `createDir("")` does not fail, and
added test case.
Markdown link migration part 1
Also the warning is improved a bit.
Local links (targeting inside its document) which had had a full anchor
were turned into concise form.
The very fact that they existed may be due to the bug in
reference to subsections fixed https://github.com/nim-lang/Nim/pull/20279,
now they are working well (both in RST syntax and
new Pandoc Markdown syntax implemented in
https://github.com/nim-lang/Nim/pull/20304)
prevent use-after-free bugs in cased objects
the bug happens specifically when deleting
an item in a seq. The item taking it's place
might not have the same case fields. Then =sink(x[i], move x[xl])
might leave the deleted fields still in memory!
If the new item switches branches again, you get a use-after-free bug.
* Implement Pandoc Markdown concise link extension
This implements https://github.com/nim-lang/Nim/issues/20127.
Besides reference to headings we also support doing references
to Nim symbols inside Nim modules.
Markdown:
```
Some heading
------------
Ref. [Some heading].
```
Nim:
```
proc someFunction*() ...
... ## Ref. [someFunction]
```
This is substitution for RST syntax like `` `target`_ ``.
All 3 syntax variants of extension from Pandoc Markdown are supported:
`[target]`, `[target][]`, `[description][target]`.
This PR also fixes clashes in existing files, particularly
conflicts with RST footnote feature, which does not work with
this PR (but there is a plan to adopt a popular [Markdown footnote
extension](https://pandoc.org/MANUAL.html#footnotes) to make footnotes work).
Also the PR fixes a bug that Markdown links did not work when `[...]`
section had a line break.
The implementation is straightforward since link resolution did not
change w.r.t. RST implementation, it's almost only about new syntax
addition. The only essential difference is a possibility to add a custom
link description: form `[description][target]` which does not have an
RST equivalent.
* fix nim 1.0 gotcha
* Add improved Windows UNC path support in std/os
Original issue: `std/os.createDir` tries to create every component of
the given path as a directory. The problem is that `createDir`
interprets every backslash/slash as a path separator. For a UNC path
this is incorrect. E.g. one UNC form is `\\Server\Volume\Path`. It's an
error to create the `\\Server` directory, as well as creating
`\\Server\Volume`.
Add `ntpath.nim` module with `splitDrive` proc. This implements UNC path
parsing as implemented in the Python `ntpath.py` module. The following
UNC forms are supported:
* `\\Server\Volume\Path`
* `\\?\Volume\Path`
* `\\?\UNC\Server\Volume\Path`
Improves support for UNC paths in various procs in `std/os`:
---
* pathnorm.addNormalizePath
* Issue: This had incomplete support for UNC paths
* The UNC prefix (first 2 characters of a UNC path) was assumed to
be exactly `\\`, but it can be `//` and `\/`, etc. as well
* Also, the UNC prefix must be normalized to the `dirSep` argument
of `addNormalizePath`
* Resolution: Changed to account for different UNC prefixes, and
normalizing the prefixes according to `dirSep`
* Affected procs that get tests: `relativePath`, `joinPath`
* Issue: The server/volume part of UNC paths can be stripped when
normalizing `..` path components
* This error should be negligable, so ignoring this
* splitPath
* Now make sure the UNC drive is not split; return the UNC drive as
`head` if the UNC drive is the only component of the path
* Consequently fixes `extractFilename`, `lastPathPart`
* parentDir / `/../`
* Strip away drive before working on the path, prepending the drive
after all work is done - prevents stripping UNC components
* Return empty string if drive component is the only component; this
is the behavior for POSIX paths as well
* Alternative implementation: Just call something like
`pathnorm.normalizePath(path & "/..")` for the whole proc - maybe
too big of a change
* tailDir
* If drive is present in path, just split that from path and return
path
* parentDirs iterator
* Uses `parentDir` for going backwards
* When going forwards, first `splitDrive`, yield the drive field, and
then iterate over path field as normal
* splitFile
* Make sure path parsing stops at end of drive component
* createDir
* Fixed by skipping drive part before creating directories
* Alternative implementation: use `parentDirs` iterator instead of
iterating over characters
* Consequence is that it will try to create the root directory
* isRootDir
* Changed to treat UNC drive alone as root (e.g. "//?/c:" is root)
* This change prevents the empty string being yielded by the
`parentDirs` iterator with `fromRoot = false`
* Internal `sameRoot`
* The "root" refers to the drive, so `splitDrive` can be used here
This adds UNC path support to all procs that could use it in std/os. I
don't think any more work has to be done to support UNC paths. For the
future, I believe the path handling code can be refactored due to
duplicate code. There are multiple ways of manipulating paths, such as
manually searching string for path separator and also having a path
normalizer (pathnorm.nim). If all path manipulation used `pathnorm.nim`,
and path component splitting used `parentDirs` iterator, then a lot of
code could be removed.
Tests
---
Added test file for `pathnorm.nim` and `ntpath.nim`.
`pathnorm.normalizePath` has no tests, so I'm adding a few unit tests.
`ntpath.nim` contains tests copied from Python's test suite.
Added integration tests to `tos.nim` that tests UNC paths.
Removed incorrect `relativePath` runnableExamples from being tested on Windows:
---
`relativePath("/Users///me/bar//z.nim", "//Users/", '/') == "me/bar/z.nim"`
This is incorrect on Windows because the `/` and `//` are not the same
root. `/` (or `\`) is expanded to the drive in the current working
directory (e.g. `C:\`). `//` (or `\\`), however, are the first two
characters of a UNC path. The following holds true for normal Windows
installations:
* `dirExists("/Users") != dirExists("//Users")`
* `dirExists("\\Users") != dirExists("\\\\Users")`
Fixes#19103
Questions:
---
* Should the `splitDrive` proc be in `os.nim` instead with copyright
notice above the proc?
* Is it fine to put most of the new tests into the `runnableExamples`
section of the procs in std/os?
* [skipci] Apply suggestions from code review
Co-authored-by: Clay Sweetser <Varriount@users.noreply.github.com>
* [skip ci] Update lib/pure/os.nim
Co-authored-by: Clay Sweetser <Varriount@users.noreply.github.com>
* Move runnableExamples tests in os.nim to tos.nim
* tests/topt_no_cursor: Change from using splitFile to splitDrive
`splitFile` can no longer be used in the test, because it generates
different ARC code on Windows and Linux. This replaces `splitFile` with
`splitDrive`, because it generates same ARC code on Windows and Linux,
and returns a tuple. I assume the test wants a proc that returns a
tuple.
* Drop copyright attribute to Python
Co-authored-by: Clay Sweetser <Varriount@users.noreply.github.com>
* remove deprecated pragma syntax from 0.20.0
closes#4651, closes#16653 with a cheap fix for now due to
how early `tfFinal` is set
* remove type pragma between name and generics
* undo removal, try removing bind expression (0.8.14)
* fix test, unremove bind expr
* remove again
* Update changelog.md
Co-authored-by: konsumlamm <44230978+konsumlamm@users.noreply.github.com>
* dependencies @ HEAD & weave test dependencies
* try fix package ci
Co-authored-by: konsumlamm <44230978+konsumlamm@users.noreply.github.com>
* Fix 16937: Make --clib option works
* Make tests/compiler/tcmdlineclib.nim works from any current dir
* Try to fix link error on macosx
* Add a comment to tests/compiler/tcmdlineclib.nims
Co-authored-by: Clay Sweetser <Varriount@users.noreply.github.com>
* implement case for cstring
for now just converts to string on C backend
* custom implementation for cstring
* remove leftover
* revert even more
* add nil + fix packages weird variant literal bug
* update docs
* [Testament] Extend and document message testing aids
* Enable inline msgs when not reject action.
Eliminates the pain of changing the line and column numbers in `nimout`
or `output` while making changes to the test.
* Enable using inline msgs and nimout together.
Allows ease of inline msgs for the test as well as testing msgs from
other modules.
* Add path separator and test filename variable interpolation in
msgs.
Eases handling path separators in the msgs.
* Add some documentation.
* Fixed lots of broken tests
* Fixed more broken tests
* Support multiple inline messages per a line
* Fix a broken test
* Revert variable substitution in `output`
* Remove uneeded params
* Update doc/testament.md
Co-authored-by: Clay Sweetser <Varriount@users.noreply.github.com>
* Update testament/specs.nim
Co-authored-by: Clay Sweetser <Varriount@users.noreply.github.com>
* Update testament/specs.nim
Co-authored-by: Clay Sweetser <Varriount@users.noreply.github.com>
* Fix indentation
Co-authored-by: quantimnot <quantimnot@users.noreply.github.com>
Co-authored-by: Clay Sweetser <Varriount@users.noreply.github.com>
- needs #20168 to make the stuff working
I went for this minimal solution because it seems like `compiler.nimble` and
`nimsuggest.nimble` are not in use
Co-authored-by: Clay Sweetser <Varriount@users.noreply.github.com>
- apparently TLineInfo's implementation of `==` ignores the column. After I fixed
the code to use exact TLineInfo comparison I fixed several other issues hidden
by that issue.
- Replaced `tuple[sym, info]` with `SymInfoPair`
* minor updates on manual
1. statement -> keyword:
1. re-phase on the explanation of `import except`: maybe the newer version does not export some of the identifiers;
1. "The original module name is then not accessible" is moved up to the previous paragraph, since it is coupled with
the previous paragraph, but not the current one.
1. re-phase on the explanation of _Disabling certain messages_.
* Apply suggestions from code review
Co-authored-by: konsumlamm <44230978+konsumlamm@users.noreply.github.com>
* Apply suggestions from code review
Co-authored-by: Clay Sweetser <Varriount@users.noreply.github.com>
* Update manual.md
do not use "()".
* Update doc/manual.md
Co-authored-by: Clay Sweetser <Varriount@users.noreply.github.com>
Co-authored-by: konsumlamm <44230978+konsumlamm@users.noreply.github.com>
Co-authored-by: ringabout <43030857+ringabout@users.noreply.github.com>
Co-authored-by: Clay Sweetser <Varriount@users.noreply.github.com>
Fix links to subheader when TOC is present
It was observed (in https://github.com/nim-lang/Nim/pull/20112)
that links to 2nd- (and subsequent) -level headings
fail if TOC is present, e.g.:
```nim
.. contents::
Type relations
==============
Convertible relation
--------------------
Ref. `Convertible relation`_
```
The problem here is that links are resolved in `rst.nim` but later
`rstgen.nim` fixes ("fixes") anchors to make them unique so that
TOC always works (if e.g. there was another sub-section like
"Convertible relation").
The solution implemented in this PR is to move that fix-up of anchors
into `rst.nim`, so that link resolution could know final anchors.
The bug seems to be added in https://github.com/nim-lang/Nim/pull/2332
in 2015, that is it is present in Nim 1.0.
* micro implementation of rfc 149
refs https://github.com/nim-lang/RFCs/issues/149
* number/array/seq literals, more statements
* try fix number literal alias issue
* renew expectedType with if/case/try branch types
* fix (nerf) index type handling and float typed int
* use typeAllowed
* tweaks + const test (tested locally) [skip ci]
* fill out more of the checklist
* more literals, change @ order, type conversions
Not copying the full call tree before the typedesc call check
in `semIndirectOp` is also a small performance improvement.
* disable self-conversion warning
* revert type conversions (maybe separate op later)
* deal with CI for now (seems unrelated), try enums
* workaround CI different way
* proper fix
* again
* see sizes
* lol
* overload selection, simplify int literal -> float
* range, new @ solution, try use fitNode for nil
* use new magic
* try fix ranges, new magic, deal with #20193
* add documentation, support templates
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
* Minor refactor
* Add OpenSSL 3 support
Remove symbols noOpenSSLHacksq and openssl10
* Drop loading of older openssl versions
* Add library path
* Use only versioned libssl soname os OSX
* Update .github/workflows/ci_packages.yml
Co-authored-by: Hein Thant <official.heinthanth@gmail.com>
* On Mac OS X CI, link OpenSSL in /usr/local/lib/
* Install OpenSSL on Mac OS X on azure pipeline
* Remove DYLD_LIBRARY_PATH
Co-authored-by: Hein Thant <official.heinthanth@gmail.com>
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
Co-authored-by: Hein Thant <official.heinthanth@gmail.com>
* Add `doctype: RST|Markdown|RstMarkdown` pragma
Implements https://github.com/nim-lang/RFCs/issues/68 ,
see also discussion in https://github.com/nim-lang/Nim/issues/17987
The permitted values:
* `markdown`, which is default. It still contains nearly all of
the RST supported but it is assumed that in time we will give up
most or all RST features in this mode
* `rst`, without any extensions
* `RstMarkdown` — compatibility with Nim 1.x. It's basically RST
with those Markdown features enabled that don't conflict with RST.
* Apply suggestions from code review
Co-authored-by: Clay Sweetser <Varriount@users.noreply.github.com>
* Additional fix in spirit of review
* Fix test after #20188
Co-authored-by: Clay Sweetser <Varriount@users.noreply.github.com>
* fixes#19973; switch to poll on posix
* it is fd
* exclude lwip
* fixes lwip
* rename select to timeoutRead
* refactor into timeoutRead/timeoutWrite
* refactor common parts
Co-authored-by: xflywind <43030857+xflywind@users.noreply.github.com>
* Remove string == nil/nil == string error
This was to help migration for `nil` strings being removed, but `nil` strings have been gone for a while now.
* remove isNil too
* Add use of Windows Wide CRT API for env. vars
Replaces use of CRT API `getenv` and `putenv` with respectively
`_wgetenv` and `_wputenv`. Motivation is to reliably convert environment
variables to UTF-8, and the wide API is best there, because it's
reliably UTF-16.
Changed the hack in `lib/std/private/win_setenv.nim` by switching the
order of the Unicode and MBCS environment update; Unicode first, MBCS
second. Because `_wgetenv`/`_wputenv` is now used, the Unicode
environment will be initialized, so it should always be updated.
Stop updating MBCS environment with the name of `getEnv`. It's not
necessarily true that MBCS encoding and the `string` encoding is the
same. Instead convert UTF-16 to current Windows code page with
`wcstombs`, and use that string to update MBCS.
Fixes regression in `6b3c77e` that caused `std/envvars.getEnv` or
`std/os.getEnv` on Windows to return non-UTF-8 encoded strings.
Add tests that test environment variables with Unicode characters in
their name or value.
* Fix test issues
Fixes
* `nim cpp` didn't compile the tests
* Nimscript import of `tosenv.nim` from `test_nimscript.nims` failed
with "cannot importc"
* Fix missing error check on `wcstombs`
* Fix ANSI testing errors
* Separate ANSI-related testing to their own tests, and only executing
them if running process has a specific code page
* Setting locale with `setlocale` was not reliable and didn't work on
certain machines
* Add handling of a "no character representation" error in second
`wcstombs` call
* tests/newruntime_misc: Increment allocCount
Increments overall allocations in `tnewruntime_misc` test. This is
because `getEnv` now does an additional allocation: allocation of the
UTF-16 string used as parameter to `c_wgetenv`.
* Revert "tests/newruntime_misc: Increment allocCount"
This reverts commit 4d4fe8bd3e.
* tests/newruntime_misc: Increment allocCount on Windows
Increments overall allocations in `tnewruntime_misc` test for Windows.
This is because `getEnv` on Windows now does an additional allocation:
allocation of the UTF-16 string used as parameter to `c_wgetenv`.
* Refactor, adding suggestions from code review
Co-authored-by: Clay Sweetser <Varriount@users.noreply.github.com>
* Document, adding suggestions
Co-authored-by: Clay Sweetser <Varriount@users.noreply.github.com>
Co-authored-by: ringabout <43030857+ringabout@users.noreply.github.com>
Co-authored-by: Clay Sweetser <Varriount@users.noreply.github.com>
The Nim manual says that an implicit conversion to cstring will
eventually not be allowed [1]:
A Nim `string` is implicitly convertible to `cstring` for convenience.
[...]
Even though the conversion is implicit, it is not *safe*: The garbage collector
does not consider a `cstring` to be a root and may collect the underlying
memory. For this reason, the implicit conversion will be removed in future
releases of the Nim compiler. Certain idioms like conversion of a `const` string
to `cstring` are safe and will remain to be allowed.
And from Nim 1.6.0, such a conversion triggers a warning [2]:
A dangerous implicit conversion to `cstring` now triggers a `[CStringConv]` warning.
This warning will become an error in future versions! Use an explicit conversion
like `cstring(x)` in order to silence the warning.
However, some files in this repo produced such a warning. For example,
before this commit, compiling `parsejson.nim` would produce:
/foo/Nim/lib/pure/parsejson.nim(221, 37) Warning: implicit conversion to 'cstring' from a non-const location: my.buf; this will become a compile time error in the future [CStringConv]
/foo/Nim/lib/pure/parsejson.nim(231, 39) Warning: implicit conversion to 'cstring' from a non-const location: my.buf; this will become a compile time error in the future [CStringConv]
This commit resolves the most visible `CStringConv` warnings, making the
cstring conversions explicit.
[1] https://github.com/nim-lang/Nim/blob/d2318d9ccfe6/doc/manual.md#cstring-type
[2] https://github.com/nim-lang/Nim/blob/d2318d9ccfe6/changelogs/changelog_1_6_0.md#type-system
When checking conditions, pass `check` untyped argument directly to if. This results in better error messages when the condition is malformed.
Previously `check 1` would fail at compile time with `Error: type mismatch: got 'int literal(-2)' for '-2' but expected 'bool'`
Now it fails with `Error: type mismatch: got 'int literal(1)' for '1' but expected 'bool'`.
Similarly `check "foo"` would fail with
```
Error: type mismatch: got <string>
but expected one of:
proc `not`(a: typedesc): typedesc
first type mismatch at position: 1
required type for a: typedesc
but expression '"somestring"' is of type: string
...
```
Now it fails with `Error: type mismatch: got 'string' for '"somestring"' but expected 'bool'`
* CI upgrade to ubuntu-20.04
The ubuntu-18.04 environment is deprecated, consider switching to ubuntu-20.04(ubuntu-latest), or ubuntu-22.04 instead. For more details see https://github.com/actions/virtual-environments/issues/6002
* Update azure-pipelines.yml
Based on what I understand from [Wikipedia](https://en.wikipedia.org/wiki/ISO_week_date#Weeks_per_year), 2001 does not have 53 weeks, but 2004, 2009, 2015, 2020 do. The years 2000 and 2001 seem to be copy pasted from the `getDaysInYear` example above. The result of `getWeeksInIsoYear` also seem to match up with Wikipedia.
That means these runnableExamples were never tested. Why is this the case? I only discovered this in #20091.
* fixes#20153; do not escape `_` for mysql
* add a test
* Update db_mysql.nim
* Update tdb_mysql.nim
Co-authored-by: Clay Sweetser <Varriount@users.noreply.github.com>
Without this, the httpclient examples are essentially setting you up for failure. I was bitten by this when my app became unable to open any more sockets.
I'm not entirely sure how long this will relevant, as I hope destructors will be added to an upcoming version of the stdlib. But figured it was worth submitting anyways!
* Add Wider Ascii Chars sets string formatting in strutils.nim
Add Wider Ascii Chars sets for string formatting (#19994) (#20120):
- Added `UppercaseLetters`, `LowercaseLetters` The set of UppercaseLetters and lowercase ASCII letters.
- Added `PunctuationChars` The set of all ASCII punctuation characters.
- Added `PrintableChars` The set of all printable ASCII characters (letters, digits, whitespace, and punctuation characters).
* Update changelog.md
Co-authored-by: konsumlamm <44230978+konsumlamm@users.noreply.github.com>
* Update changelog.md
Co-authored-by: konsumlamm <44230978+konsumlamm@users.noreply.github.com>
Co-authored-by: ringabout <43030857+ringabout@users.noreply.github.com>
* Fix header level for noalias pragma section.
* Fix code snippet outside of code block that raised an error with `rst2html`.
* Fix broken 'Convertible relation' links that were raising warnings.
Co-authored-by: quantimnot <quantimnot@users.noreply.github.com>
* bump macOS image on Azure CI to macos-11
##[warning]The macOS-10.15 environment is deprecated, consider switching to macos-11(macos-latest), macos-12 instead. For more details see https://github.com/actions/virtual-environments/issues/5583
* fix CI error
* .forbids pragma: defining illegal effects for proc types
This patch intends to define the opposite of the .tags pragma: a way to define effects which are not allowed in a proc.
* updated documentation and changelogs for the forbids pragma
* renamed notTagEffects to forbiddenEffects
* corrected issues of forbids pragma
the forbids pragma didn't handle simple restrictions properly and it also had issues with subtyping
* removed incorrect character from changelog
* added test to cover the interaction of methods and the forbids pragma
* covering the interaction of the tags and forbids pragmas
* updated manual about the forbids pragma
* removed useless statement
* corrected the subtyping of proc types using the forbids pragma
* updated manual for the forbids pragma
* updated documentations for forbids pragma
* updated nim docs
* updated docs with rsttester.nim
* regenerated documentation
* updated rst docs
* Update changelog.md
Co-authored-by: ringabout <43030857+ringabout@users.noreply.github.com>
* updated changelog
* corrected typo
Co-authored-by: ringabout <43030857+ringabout@users.noreply.github.com>
We were doing a very poor job detecting the major version of GCC by
parsing the output of --version.
This patches uses -dumpversion to make this parsing straightforward and
it also fixes a bunch of compiling issues on different platforms with
custom output for --version switches. For example, openSUSE first line
of the output includes the revision number and the parsing that was
being done did mix that number with the major version and breaks
building the nim compiler (as it doesn't find the 3 dots for an X.Y.Z semver
format, hence returning "false").
In this patch, we simply use -dumpversion (which has been at least from
1993, so we are safe :)
* Improve rand(bool)
* Use sign test instead of mod 2
* Use mod 2 again, as it works for js
* Use right shift as suggested by the authors of xoroshiro
* Update random.nim
* General case doesn't need any right shift it was correct to begin with
* Update random.nim
* add comment
Co-authored-by: flywind <43030857+xflywind@users.noreply.github.com>
Fixed errors in Nim Backend integration.
Section "Nim invocation example from C"
NimMain needs a declaration and function declarations have external
linkage by default.
Also with the order of arguments to gcc with a static lib,
maths.c needs to come before the static lib.
* Implement type command
- this will be mapped to textDocument/typeDefinition in LSP protocol. It will be
very useful for `nim` in particular because typically most of the time the type
is inferred.
* Update nimsuggest/nimsuggest.nim
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
- add additional parameters parsing (other implementations will just
ignore them). E.g. if in RST we have:
.. code:: nim
:test: "nim c $1"
...
then in Markdown that will be:
```nim test="nim c $1"
...
```
- implement Markdown interpretation of additional indentation which is
less than 4 spaces (>=4 spaces is a code block but it's not
implemented yet). RST interpretes it as quoted block, for Markdown it's
just normal paragraphs.
- add separate `md2html` and `md2tex` commands. This is to separate
Markdown behavior in cases when it diverges w.r.t. RST significantly —
most conspicously like in the case of additional indentation above, and
also currently the contradicting inline rule of Markdown is also turned
on only in `md2html` and `md2tex`. **Rationale:** mixing Markdown and
RST arbitrarily is a way to nowhere, we need to provide a way to fix the
particular behavior. Note that still all commands have **both** Markdown
and RST features **enabled**. In this PR `*.nim` files can be processed
only in Markdown mode, while `md2html` is for `*.md` files and
`rst2html` for `*.rst` files.
- rename `*.rst` files to `.*md` as our current default behavior is
already Markdown-ish
- convert code blocks in `docgen.rst` to Markdown style as an example.
Other code blocks will be converted in the follow-up PRs
- fix indentation inside Markdown code blocks — additional indentation
is preserved there
- allow more than 3 backticks open/close blocks (tildas \~ are still not
allowed to avoid conflict with RST adornment headings) see also
https://github.com/nim-lang/RFCs/issues/355
- better error messages
- (other) fix a bug that admonitions cannot be used in sandbox mode; fix
annoying warning on line 2711
* Change `styleCheck` to ignore foreign packages
* Symbols from foreign packages are now ignored.
* Fixed `styleCheck` violations in `compiler` package.
* Added symbol ownership to custom annotation pragmas.
* Minor refactors to cleanup style check callsites.
* Minor internal documentation of reasons why a symbol isn't checked.
Style violations were fixed in the compiler after thet were exposed by
the changes. The compiler wouldn't compile otherwise.
Symbol ownership for custom pragma annotations is needed for checking
the annotation's style. A NPE was raised otherwise.
Fixes#10201
See also nim-lang/RFCs#456
* Fix a misunderstanding about excluding field style checks
I had refactored the callsites of `styleCheckUse` to apply the DRY
principle, but I misunderstood the field access handling in a template
as a general case. This corrects it.
* Fix some `styleCheck` violations in `compiler/evalffi`
The violations were exposed in CI when the compiler was built with
libffi.
* Removed some uneeded transitionary code
* Add changelog entry
Co-authored-by: quantimnot <quantimnot@users.noreply.github.com>
* Add sink and lent to critbits
* Remove lent for pairs
I guess lent doesn't work well inside tuples
* Remove lent from template in critbits
Apparently this also doesn't work, because some checks failed
* replace gcc asm with __asm__ and add a test
* update test case to specify gcc or clang and not cpp
Co-authored-by: daniel <danielclarke@wearepopgun.com>
Fixes Compilation error with --app:lib when a module tries to pull os.paramStr on posix by throwing a runtime exception instead.
More details here: #19964
* default threads on
* make rst gcsafe
* ignore threads option for nimscript
* threads off
* use createShared for threads
* test without threads
* avr threds off
* avr threads off
* async threads off
* threads off
* fix ci
* restore option
* make CI pleased
* fix ic tests
* Update config.nims
* add changelog
* Update changelog.md
Co-authored-by: konsumlamm <44230978+konsumlamm@users.noreply.github.com>
Co-authored-by: konsumlamm <44230978+konsumlamm@users.noreply.github.com>
* fix vcc rawsetjmp
* changing `_longjmp()` to `longjmp()` and
`_setjmp()` to `setjmp()`
* fix
* fix setjmp to clangcl on Windows
* fix genTrySetjmp() to clangcl on Windows
* once C++, always C++
When using `{.compile: "file.cc".}` in a nim module, even when compiling
with `nim c` the C++ compiler should be used - once any C++ file has
been compiled, the C++ linker also needs to be used.
* more strict C++ check
* simplify code
* [docgen] Group sidebar sections into <details> (open by default)
* [docgen] Consistent indentation in generated HTML
(this is a boon for working on docgen's html/css output)
* [docgen] Move Source/Edit buttons inside main div
This makes styling the documentation significantly easier.
* [docgen] Somewhat consistent CSS formatting
* [docgen] Keep the sidebar onscreen while scrolling
* [docgen] Tweak CSS for the sticky sidebar
* [docgen] search type=text ==> type=search
* [docgen] Update expected doc output
* [docgen] Fix Group by Type sidebar placement bug
* [docgen] Curse you, whitespace (fix tests)
* [docgen] Fix rst2html tests
Co-authored-by: sandytypical <43030857+xflywind@users.noreply.github.com>
* Windows: enable nimRawSetjmp by default
See #19197. The default setjmp can randomly segfault on windows
* Attempt to disable the flag for bootstraping
* Disable styleCheck for c_setjmp
* Initial implementation of nimsuggest v3
Rework `nimsuggest` to use caching to make usage of ide commands more efficient.
Previously, all commands no matter what the state of the process is were causing
clean build. In the context of Language Server Protocol(LSP) and lsp clients
this was causing perf issues and overall instability. Overall, the goal of v3 is
to fit to LSP Server needs
- added two new commands:
- `recompile` to do clean compilation
- `changed` which can be used by the IDEs to notify that a particular file has been changed.
The later can be utilized when using LSP file watches.
- `globalSymbols` - searching global references
- added `segfaults` dependency to allow fallback to clean build when incremental
fails. I wish the error to be propagated to the client so we can work on fixing
the incremental build failures (typically hitting pointer)
- more efficient rebuild flow. ATM incremental rebuild is triggered when the
command needs that(i. e. it is global) while the commands that work on the
current source rebuild only it
Things missing in this PR:
- Documentation
- Extensive unit testing.
Although functional I still see this more as a POC that this approach can work.
Next steps:
- Implement `sug` request.
- Rework/extend the protocol to allow better client/server communication.
Ideally we will need push events, diagnostics should be restructored to allow
per file notifications, etc.
- implement v3 test suite.
- better logging
* Add tests for v3 and implement ideSug
* Remove typeInstCache/procInstCache cleanup
* Add ideChkFile command
* Avoid contains call when adding symbol info
* Remove log
* Remove segfaults
* Add two debugutils procs that native debuggers can break on use to
execute commands when code of interest is being compiled.
* Add GDB and LLDB programs to disable and enable breakpoints and
watchpoints when code of interest is being compiled.
* Extend the `intern.rst` docs regarding debugging the compiler.
Co-authored-by: quantimnot <quantimnot@users.noreply.github.com>
Added `strutils.find` changes
Standard library section restructured to group by `changed/added/deprecated/removed` with paragraphs marked by markdown comments.
This changes the default for the `last` parameter of various `find`
routines from `0` to `-1`. Previous default prevents limiting the search
to the first character. This is a logic error, as full text search was
performed for 2 *valid* values of `last`: `0` and `last.high()`.
Adds an overload for `initSkipTable` which returns a newly initialized
table. This encapsulates every single usage of a `var`-acting original
func in this module.
Co-authored-by: flywind <xzsflywind@gmail.com>
change the type of mangleJsName
since mangleJsName is used in macros, there is no need to use cstring. Using cstring may increase conversions and cause warnings.
* Refactor and doc package handling, module name mangling
* Consolidate, de-duplicate and extend package handling
* Alter how duplicate module names of a package are handled
* Alter how module names are mangled
* Fix crash when another package is named 'stdlib' (test case added)
* Doc what defines a package in the manual
Modules with duplicate names within a package used to be given 'fake'
packages to resolve conflicts. That prevented the ability to discern if
a module belonged to the current project package or a foreign package.
They now have the proper package owner and the names are mangled in a
consistent manner to prevent codegen clashes.
All module names are now mangled the same. Stdlib was treated special
before, but now it is same as any other package. This fixes a crash
when a foreign package is named 'stdlib'.
Module mangling is altered for both file paths and symbols used by the
backends.
Removed an unused module name to package mapping that may have been
intended for IC. The mapping was removed because it wasn't being used
and was complicating the issue of package modules with duplicate names
not having the proper package owner assigned.
* Fix some tests
* Refactor `packagehandling`
* Remove `packagehandling.withPackageName` and its uses
* Move module path mangling from `packagehandling` to `modulepaths`
* Move `options.toRodFile` to `ic` to break import cycle
* Changed import style to match preferred style
Co-authored-by: quantimnot <quantimnot@users.noreply.github.com>
* Fix global destructor injection for JS backend
* Moved global destructors injection before the final call to transform and
generate JS code. It had previously been after and thus not no JS was
generated for them.
* Added some internal documentation of `jsgen`.
* Enable a current destructor test to cover the JS backend as well.
* Fixes the JS aspect of #17237.
* Fixed global destructor injection order for JS backend
Co-authored-by: quantimnot <quantimnot@users.noreply.github.com>
it appears the documentation intends to compare & with .fmt but there is no formatting in the string. even though the assert is true it doesn't quite prove that .fmt is an equivalent formatter.
The test tasyncssl may fail on modern linux versions
as they require at least 2048 bit certificates.
A new certificate and private key with default values
has been added to meet this new requirement.
IANA is using id 0 for "HOPOPT" instead of "ip"
for some time now and those systems that still
support the old mapping will stop doing so at
some point in the future.
Some BSDs and openSUSE are already following this
change as per IANA list here:
https://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml
As new unixes (and maybe Windows, who knows) start
to adopt the updated IANA list, this will keep
failing from time to time, so it's better to
remove the "ip" check altogether.
* Fix questionable suggestion in `stutils` docs
- Removes the recommendation to pass a string slice for getting a relative
index for `find` and `rfind` functions, as this currently makes a string
copy, while a simple subtraction is enough.
- Docstring for `SkipTable` type.
* Doc layout fixup
* Better error message and tests for bad await
* Use compiles to check if await is valid
* temp: disable windows noasync test
* Better error report, simplify test
Co-authored-by: flywind <xzsflywind@gmail.com>
* stylecheck usages part two: stdlib cleanup
typeinfo.nim: importCompilerProc => importcompilerproc
nre.nim: newLineFlags => newlineFlags
system.nim: JSRoot => JsRoot
ref #19319
* prefer importCompilerProc
* fix stylecheck error with asyncdispatch
it is a partial regression since #12842
* add tests
* don't use echo in tests
* fix stylecheck bug with nre
* Update compiler/linter.nim
* no need to check dotexpr again
* neither did let/var/const
* Fix bug in freshVarForClosureIter. Fixes#18474.
freshVarForClosureIter was returning non-fresh symbols sometimes.
Fixed by making addField return the generated PSym.
* remove discardable
Co-authored-by: Nick Smallbone <nick@smallbone.se>
* Fixed formatting error in warningAsError.
There was only a single space character between the warning and its description, so it shows up as part of the name (in bold) and with no description.
Copied the way hotCodeReloading was formatted, with the description in a new line.
Also changed descriptions from 'ditto' to what the description it references says.
* Fixed typo in advopt.txt
Corrected 'hints' to 'warnings' in updated advopt.txt.
Simply recurse into their first child, which is always
a nkDotExpr instead of treating them seperately.
This fixes the rhs sym of a nkCheckedFieldExpr being
checked twice in aliases. This double checking didn't
cause any issues, but was unintentional and redundant.
* Remove Deprecated httpcore func
* Remove Deprecated httpcore func
* Fix a test with Deprecated func
* Restart CI, Apple can code shit anymore I tell you
* Fix CPU detection for i386
Commit 787def271b breaks CPU detection for i386 on OpenBSD and probably on other platforms.
[ isOpenIndiana -eq "yes" ] always returns 0, so mycpu is always set to "amd64".
* Update buildsh.nimf
Fix accidental bashism
* Remove define nimExperimentalAsyncjsThen for std/asyncjs.then and std/jsfetch
* Remove define nimExperimentalAsyncjsThen for std/asyncjs.then and std/jsfetch
* Remove define nimExperimentalAsyncjsThen for std/asyncjs.then and std/jsfetch
* Remove define nimExperimentalAsyncjsThen for std/asyncjs.then and std/jsfetch
This removes volatiles on ARC/ORC targets in NimMain and PreMainInner.
This avoids an issue where they couldn't be optimised out on
microcontrollers leading to larger code. Since the stack bottom doesn't
have to be initialised this way when using ARC or ORC (or None, which is
also covered by this PR) these can be safely removed.
extccomp.addExternalFileToCompile() relies on hashes to decide whether
an external C file needs recompilation or not.
Due to short-circuit evaluation of boolean expressions, the procedure
that generates a corresponding hash file is not called the first time an
external file is compiled, so an avoidable recompilation is triggered
the next build.
This patch fixes that by moving the proc call with a desired side
effect from its boolean expression, so it's executed unconditionally.
Fixes silent disappearance of Markdown (pseudo-)link when it's detected as
unsafe protocol. Now it will be converted to plain text in spirit of
[the specification](https://spec.commonmark.org/0.30/#links).
For that sake the check for protocol is added to rst.nim also.
* move io out of system
* fix tests
* fix tests
* next step
* rename to syncio
* rename
* fix nimscript
* comma
* fix
* fix parts of errors
* good for now
* fix test
* Update with latest API and fix missing bindings
remove deprecated `Body`
remove implicit `cstring` convs
add `Headers` to `FetchOptions`
add `Request` init proc which takes `FetchOptions`
* Update lib/std/jsfetch.nim
Co-authored-by: Juan Carlos <juancarlospaco@gmail.com>
* Update lib/std/jsfetch.nim
Co-authored-by: Juan Carlos <juancarlospaco@gmail.com>
* remove experimental flag
Co-authored-by: Juan Carlos <juancarlospaco@gmail.com>
* New/better macro pragmas, make some experimental
fix#15920, close#18212, close#14781, close#6696,
close https://github.com/nim-lang/RFCs/issues/220
Variable macro pragmas have been changed to
only take a unary section node.
They can now also be applied in sections with multiple variables,
as well as `const` sections. They also accept arguments.
Templates now support macro pragmas, mirroring other routine types.
Type and variable macro pragmas have been made experimental.
Symbols without parentheses instatiating nullary macros or templates
has also been documented in the experimental manual.
A check for a redefinition error based on the left hand side of variable
definitions when using variable macro pragmas was disabled.
This nerfs `byaddr` specifically, however this has been documented as
a consequence of the experimental features `byaddr` uses.
Given how simple these changes are I'm worried if I'm missing something.
* accomodate compiler boot
* allow weird pragmas
* add test for #10994
* remove some control flow, try remove some logic
Instead of rejecting type expressions based on node kind,
evaluate the expression as a type.
This is already the behavior for call results, and it has its own error
for non-types, which is the same error you would normally get
with 2 words swapped.
* deprecate unsafeAddr; extend addr
addr is now available for all addressable locations, unsafeAddr is deprecated and become an alias for addr
* follow @Vindaar's advice
* change the signature of addr
* unsafeAddr => addr (stdlib)
* Update changelog.md
* unsafeAddr => addr (tests)
* Revert "unsafeAddr => addr (stdlib)"
This reverts commit ab83c99c50.
* doc changes; thanks to @konsumlamm
Co-authored-by: konsumlamm <44230978+konsumlamm@users.noreply.github.com>
Co-authored-by: konsumlamm <44230978+konsumlamm@users.noreply.github.com>
* Use openarray of bytes in md5
* fix CI
* cleanup
* use noSideEffect for bootstrapping
* fix CI again
* actually fix CI by checking if it works
* this is getting ridiculous
* put old md5 version in compiler, remove vmop
* Parameters now can constrain static in type definitions
resolved regression with generic procedures
* Update compiler/sigmatch.nim
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
Fixes three broken cross references to `rfind` in strutils.
Breakage due to signature changes of the `rfind` methods.
Co-authored-by: adigitoleo <adigitoleo@dissimulo.com>
Mention the `import foo {.all.}` syntax in the manual,
with a caveat about private imports.
Also link to the experimental importutils module.
Co-authored-by: adigitoleo <adigitoleo@dissimulo.com>
--expandArc
```
var
a
b
a = matrix(5, 5, 1.0)
b = matrix(5, 5, 2.0)
`=sink`(b, -
let blitTmp = b
wasMoved(b)
blitTmp +
a)
`=destroy`(b)
`=destroy`(a)
```
* add new modules, except experimental ones
* remove deprecated modules mersenne and sharedlist
* better describe why some modules fail and some modules don't
* Update lists.nim
* Update tlists.nim
* removed check `if b.tail != nil`
The tail of the list being null it is still possible to retrieve its end by going through all nodes from the head. So checking for null from `b.tail` is unnecessary. However, setting `a.tail = b.tail` only if `a.head != nil`, so you don't break a good list with an already broken one.
* Update colors.nim
Added `lightgray` alias to `lightgrey` and `...grey`aliases for the rest of the gray colors.
Added color `rebeccapurple`.
Fixed the incorrect values for the `PaleVioletRed` and `MediumPurple` colors.
This module should now be matching the CSS colors.
I used the seq[tuple] syntax for defining the names.
* Document colors changes.
Previously CVerifyPeerUseEnvVars was not being passed into
scanSslCertificates, which meant that we weren't scanning
additional certificate locations given via the SSL_CERT_FILE and
SSL_CERT_DIR environment variables
* Variant of that works with raw IpAddresses.
- Add doc tests for new net proc's.
- Aadd recvFrom impl
- Add recvFrom impl -- tweak handling data var
- Update lib/pure/net.nim
Co-authored-by: Dominik Picheta <dominikpicheta@googlemail.com>
- cleaning up sendTo args
- remove extra connect test
- cleaning up sendTo args
- fix inet_ntop test
- fix test failing - byte len
* fix test failing - byte len
* debugging odd windows build failure
* debugging odd windows build failure
* more experiments to figure out the windows failure
* try manual assigment on InAddr
Co-authored-by: Jaremy Creechley <jaremy.creechley@panthalassa.com>
* fixes a possible 'javascript:' protocol exploit [backport:1.0]
* add tests
* Update tests/stdlib/trstgen.nim
* add the same logic for hyperlinks
* move the logic into a proc
Co-authored-by: narimiran <narimiran@disroot.org>
* nimRawSetjmp: support Windows
Using `_setjmp()` directly is required to avoid some rare (but very
annoying) exception-related stack corruption leading to segfaults on
Windows, with Mingw-w64 and SEH.
More details: https://github.com/status-im/nimbus-eth2/issues/3121
Also add "nimBuiltinSetjmp" - mostly for benchmarking.
* fix for Apple's Clang++
`spawn` uses `nimSpawn3` internally and `pinnedSpawn` uses `nimSpawn4` internally. I comment it in order to help contributors get the gist of its functionality.
When creating heterogenous slices of distinct types, the compiler does
not initialize the internal type's `size` before accessing it.
This then leads to this crash message:
```
compiler/int128.nim(594, 11) `false` masking only implemented for 1, 2, 4 and 8 bytes [AssertionError]
```
This patch initializes the `size` properly, fixing the problem.
* Testament checks host/cpu in compiler/platform for discard spec statement
* Remove duplicated value checks, add comments, add all cpu bit sizes and endianesses
Co-authored-by: quantimnot <quantimnot@users.noreply.github.com>
* Refactor: rename proc to func
* Fix punycode.decode function
This function could only properly decode punycodes containing a single
encoded unicode character. As soon as there was more than one punycode
character group to decode it produced invalid output - the number of
characters was correct, but their position was not.
* Update tpunycode.nim
Co-authored-by: Clay Sweetser <Varriount@users.noreply.github.com>
* Merge file size fields correctly on Windows
Merge file size fields correctly on Windows
- Merge the two 32-bit file size fields from `BY_HANDLE_FILE_INFORMATION` correctly in `rawToFormalFileInfo`.
- Fixes#19135
* Update os.nim
This flag has a very significant performance impact on programs compiled with --threads:on. It is also apparently not needed anymore for standard circumstances. Can we remove the config? See https://github.com/nim-lang/Nim/issues/18146#issuecomment-876802676 for discussion and perf impact. [backport:1.6]
* Call {.cursor.} a pragma.
Its hard to find .curser annotation while googling because all other things like it are called pragmas. See https://nim-lang.org/docs/manual.html#pragmas
Also the . in front of the name makes it hard to find and search for.
Can we just call it cursor pragma?
* Small fix for comment.
* Use testament to check Norm test pass
This is what I actually use to test Norm, so it's better to use it.
This should not currently pass. This is expected because this is exactly the problem I want to highlight with this PR. My tests do indeed not pass at the moment.
* Remove clearNimblePath from testament command.
Co-authored-by: flywind <xzsflywind@gmail.com>
* Fix vm's sametype implementation to properly handle generics and typedescs
* actually fixed sametype + have test
* added comments and removed unsafe code
Otherwise, compiler produces broken error message - `$1` is not interpolated
`Error: The $1 type doesn't have a default value. The following fields must be initialized: importGraph.`
* adding new system module sysexitprocs and including system exit procedures when registering exit handlers defined in userland
* fixing failing tests and adding initialization guard to handle cases where the module's global init logic isn't invoked first as is the case with some gc implementaions
* js backend shouldn't try to invoke actual system exit procs
* fixing formatting in sysexitprocs.nim
* 256 was too much - my max number of plugins in my engine is 64 and I require two hooks per runtime it looks like with tls emulation turned off, so for my purposes 128 should be sufficient
* so atExit should be enough here, can get rid of all the extra cruft I had added on top since I didn't realize atExit already provided a stack
* done being cute - since newruntime prevents correct cpp codegen for object variants apparently and breaks tests if I try to use std/exitprocs, ddSysExitProc is just going into both modules. Since system doesn't include system/io, polluting system with it doesn't make sense either... at least it is only importc'd when it is required in either module and we don't have to have any weird when defined(nimOwnedEnabled) with a comment explaining why
* Update terminal.nim
- Added some extra docs to cursorUp/Down/Forward/Backward
- I was able to use hideCursor and showCursor without adding stdout, removed the parameter
- Added docs to terminalHeight()* and terminalWidth()*
* Update lib/pure/terminal.nim
Co-authored-by: konsumlamm <44230978+konsumlamm@users.noreply.github.com>
* Update lib/pure/terminal.nim
Co-authored-by: konsumlamm <44230978+konsumlamm@users.noreply.github.com>
* Added back f: file to cursor movement
* Removed unnecessary comments
Co-authored-by: konsumlamm <44230978+konsumlamm@users.noreply.github.com>
* Fix#19052; [backport:1.6.0]
Adds a compile flag to avoid a getrandom syscall, fixing #19052.
This is neccesary when the getrandom syscall is missing, as noted in #19052, particularly in kernel versions < 3.17 when getrandom was introduced. Specifically relevant is this is missing from kernel 3.10, which is the supported kernel throughout RHEL 7 and CentOS 7, which is widely used at many organizations. Without this, versions of nim that include sysrand (i.e. versions >= 1.6.0) will not compile without modification, however with this change a compile flag may be used to fall back using /dev/urandom as done with any unknown Posix OS (preferred here as a fallback since it already supplies a cryptographically secure PRNG and existing code deals with entropy pool init, etc).
The change is placed behind a compile flag, as discussed in github ticket #19052 (summed up here):
* First, I can't seem to catch that a importc such as SYS_getrandom is declared without using it (the declared proc returns true, but compiler throws an undeclared identifier flag when referencing it).
* Second, it seemed preferable to be behaviorally explicit vs implicit when considering this is intended to be a cryptographically secure PRNG.
* Third, if I intend to compile on a kernel >= 3.17 while running the binary on at least one system < 3.17, I'll want to be able to target this without relying on a compile time determination if the getrandom syscall is available.
* Documenting compile flag for -d:nimNoGetRandom and adding changelog entry
Related to #19052 and comments in PR #19053. Also created a new changelog file since none currently exists.
Co-authored-by: Timothy Alexander <talexander@midwestlabs.com>
* SameTypeAux now properly traverses generic distincts
* Smarter traversal of distincts
* Removed redundant check
* Fixed nkConv for jsgen
* Added test for non distinct nkConv
* using skiptypes for distinct now
* Fixed genaddr for nkconv
* deinitializing locks at program exit
* deinitLock shouldn't be called for js backend I guess...
* I suppose this is the best way to detect the
ewruntime option
* I guess I need these guards here too...
* fixing merge conflict
* Porting Nim to run on Zephyr.
Includes changes to `std/net`.
Squashed commit of the following:
tweaking more memory / malloc things
revert back bitmasks
tweaking nim to use kernel heap as C malloc doesn't work
fixing socket polling on zephyr
cleanup getting maximum sockets for process or for rtos'es
reorganizing and fixing net for async / system
merge netlite changes back into nativesockets
merge netlite changes back into nativesockets
reverting native sockets back
tweaking nim / zephyr network
adding option to run 'net-lite' from linux
bridging zephyr's max connections
fixing net errors
fixing compilation with getAddrString
fixing compilation with getAddrString
experimenting with a nativesockets_lite ... getAddrString
experimenting with a nativesockets_lite ... getAddrString
experimenting with a nativesockets_lite ... getLocalAddr
experimenting with a nativesockets_lite ... getLocalAddr
experimenting with a nativesockets_lite ...
add note regarding incorrect FreeRTOS Sockadd_in fields
changing to NIM_STATIC_ASSERT
cleaning up the static_assert error messages
cleaning up the static_assert error messages
setting up static assert ftw!
testing compile time asserts
reworking Sockaddr objects to more closely match various platforms
reworking Sockaddr objects to more closely match various platforms
reworking Sockaddr objects to more closely match various platforms
finding missing items (issue #18684)
fixup posix constants (issue #18684)
adding plumbing for zephyr os (issue #18684)
adding plumbing for zephyr os (issue #18684)
* fixing constant capitalizations
* remove extra debug prints and fix TSa_Family/cint issue
* remove extra debug prints and fix TSa_Family/cint issue
* Porting Nim to run on Zephyr.
Includes changes to `std/net`.
Squashed commit of the following:
tweaking more memory / malloc things
revert back bitmasks
tweaking nim to use kernel heap as C malloc doesn't work
fixing socket polling on zephyr
cleanup getting maximum sockets for process or for rtos'es
reorganizing and fixing net for async / system
merge netlite changes back into nativesockets
merge netlite changes back into nativesockets
reverting native sockets back
tweaking nim / zephyr network
adding option to run 'net-lite' from linux
bridging zephyr's max connections
fixing net errors
fixing compilation with getAddrString
fixing compilation with getAddrString
experimenting with a nativesockets_lite ... getAddrString
experimenting with a nativesockets_lite ... getAddrString
experimenting with a nativesockets_lite ... getLocalAddr
experimenting with a nativesockets_lite ... getLocalAddr
experimenting with a nativesockets_lite ...
add note regarding incorrect FreeRTOS Sockadd_in fields
changing to NIM_STATIC_ASSERT
cleaning up the static_assert error messages
cleaning up the static_assert error messages
setting up static assert ftw!
testing compile time asserts
reworking Sockaddr objects to more closely match various platforms
reworking Sockaddr objects to more closely match various platforms
reworking Sockaddr objects to more closely match various platforms
finding missing items (issue #18684)
fixup posix constants (issue #18684)
adding plumbing for zephyr os (issue #18684)
adding plumbing for zephyr os (issue #18684)
* fixing constant capitalizations
* remove extra debug prints and fix TSa_Family/cint issue
* remove extra debug prints and fix TSa_Family/cint issue
* fixing PR issues
* Porting Nim to run on Zephyr.
Includes changes to `std/net`.
Squashed commit of the following:
tweaking more memory / malloc things
revert back bitmasks
tweaking nim to use kernel heap as C malloc doesn't work
fixing socket polling on zephyr
cleanup getting maximum sockets for process or for rtos'es
reorganizing and fixing net for async / system
merge netlite changes back into nativesockets
merge netlite changes back into nativesockets
reverting native sockets back
tweaking nim / zephyr network
adding option to run 'net-lite' from linux
bridging zephyr's max connections
fixing net errors
fixing compilation with getAddrString
fixing compilation with getAddrString
experimenting with a nativesockets_lite ... getAddrString
experimenting with a nativesockets_lite ... getAddrString
experimenting with a nativesockets_lite ... getLocalAddr
experimenting with a nativesockets_lite ... getLocalAddr
experimenting with a nativesockets_lite ...
add note regarding incorrect FreeRTOS Sockadd_in fields
changing to NIM_STATIC_ASSERT
cleaning up the static_assert error messages
cleaning up the static_assert error messages
setting up static assert ftw!
testing compile time asserts
reworking Sockaddr objects to more closely match various platforms
reworking Sockaddr objects to more closely match various platforms
reworking Sockaddr objects to more closely match various platforms
finding missing items (issue #18684)
fixup posix constants (issue #18684)
adding plumbing for zephyr os (issue #18684)
adding plumbing for zephyr os (issue #18684)
* fixing constant capitalizations
* remove extra debug prints and fix TSa_Family/cint issue
* remove extra debug prints and fix TSa_Family/cint issue
* Remerge
* fixing constant capitalizations
* remove extra debug prints and fix TSa_Family/cint issue
* remove extra debug prints and fix TSa_Family/cint issue
* fixing PR issues
* fix maxDescriptors on zephyr/freertos
* move maxDescriptors to selector.nim -- fixes compile issue
* change realloc impl on zephyr to match ansi c behavior
* change realloc impl on zephyr to match ansi c behavior
* force compileOnly mode for tlwip
Co-authored-by: Jaremy J. Creechley <jaremy.creechley@wavebaselabs.com>
Co-authored-by: Jaremy Creechley <jaremy.creechley@panthalassa.com>
When assigning constant output to a seq, and then passing that static
seq to other functions that take `openArray`, the compiler may end up
producing errors, as it does not know how to convert `static[seq[T]]`
to `openArray[T]`. By ignoring the `static` wrapper on the type for
the purpose of determining data memory location and length, this gets
resolved cleanly. Unfortunately, it is relatively tricky to come up
with a minimal example, as there are followup problems from the failing
conversion, e.g., this may lead to `internal error: inconsistent
environment type`, instead of the relevant `openArrayLoc` error message.
* feat: copy to clipboard
* fix: CI failure related issue
* fix: CI failure issue
* fix: copy to clipboard button bug
* feat: copy pragmadots value to clipboard
description:"Create a new bug report. Have you found an unexpected behavior? Use this form."
title:"Think about the title, twice."
labels:["unconfirmed"]
body:
- type:markdown
attributes:
value:|
Please provide a minimal code example that reproduces the bug if possible.
Reports with a reproducible example or detailed information will likely receive fixes faster.
- type:textarea
id:description
attributes:
label:Description
description:|
Describe the problem. Code example can be given here.
placeholder:Bug reports with reproducible code or detailed information will be fixed faster.
validations:
required:true
- type:textarea
id:nim-version
attributes:
label:Nim Version
description:|
Can be obtained from `nim -v` on the command line along with the OS/architecture.
For development versions, make sure to include the commit hash.
validations:
required:true
- type:textarea
id:current-logs
attributes:
label:Current Output
description:Please copy and paste any relevant log output. This will be automatically formatted into code, so no need for backticks.
placeholder:Bug reports with reproducible code or detailed information will be fixed faster.
render:text
- type:textarea
id:expected-logs
attributes:
label:Expected Output
description:Please copy and paste any relevant log output. This will be automatically formatted into code, so no need for backticks.
placeholder:Bug reports with reproducible code or detailed information will be fixed faster.
render:text
- type:textarea
id:known-workarounds
attributes:
label:Known Workarounds
description:Provide any known workarounds.
validations:
required:false
- type:textarea
id:extra-info
attributes:
label:Additional Information
description:Any additional relevant information.
validations:
required:false
- type:markdown
attributes:
value:|
- Please check whether the problem still exists in the devel branch, which can be installed via [choosenim](https://github.com/nim-lang/choosenim/), [nightlies](https://github.com/nim-lang/nightlies/), or by [creating a temporary build of the compiler](https://nim-lang.github.io/Nim/intern.html#debugging-the-compiler-building-an-instrumented-compiler).
- Consider writing a PR targetting devel branch after filing this, see [contributing](https://nim-lang.github.io/Nim/contributing.html).
- If it's a pre-existing compiler bug, see [debugging the compiler](https://nim-lang.github.io/Nim/intern.html#debugging-the-compiler) which should give more context on a compiler crash.
- If it's a regression, you can help us by identifying which version introduced the bug by [bisecting](https://nim-lang.github.io/Nim/intern.html#bisecting-for-regressions) or at least trying known past releases (e.g. `choosenim 2.0.0`).
The Nim repo also supports bisecting in issue comments by adding `!nim c`, `!nim js` etc. before a code block, see [nimrun-action](https://github.com/juancarlospaco/nimrun-action).
- [Please, consider a Donation for the Nim project.](https://nim-lang.org/donate.html)
A new form of type inference called [top-down inference](https://nim-lang.github.io/Nim/manual_experimental.html#topminusdown-type-inference) has been implemented for a variety of basic cases.
For example, code like the following now compiles:
```nim
letfoo:seq[(float,byte,cstring)]=@[(1,2,"abc")]
```
### Forbidden Tags
[Tag tracking](https://nim-lang.github.io/Nim/manual.html#effect-system-tag-tracking) now supports the definition
of forbidden tags by the `.forbids` pragma which can be used to disable certain effects in proc types.
For example:
```nim
typeIO=object## input/output effect
proc readLine():string{.tags:[IO].}=discard
proc echoLine():void=discard
proc no_IO_please(){.forbids:[IO].}=
# this is OK because it didn't define any tag:
echoLine()
# the compiler prevents this:
lety=readLine()
```
### New standard library modules
The famous `os` module got an overhaul. Several of its features are available
under a new interface that introduces a `Path` abstraction. A `Path` is
a `distinct string`, which improves the type safety when dealing with paths, files
and directories.
Use:
-`std/oserrors` for OS error reporting.
-`std/envvars` for environment variables handling.
-`std/paths` for path handling.
-`std/dirs` for directory creation/deletion/traversal.
-`std/files` for file existence checking, file deletions and moves.
-`std/symlinks` for symlink handling.
-`std/appdirs` for accessing configuration/home/temp directories.
-`std/cmdline` for reading command line parameters.
### Consistent underscore handling
The underscore identifier (`_`) is now generally not added to scope when
used as the name of a definition. While this was already the case for
variables, it is now also the case for routine parameters, generic
parameters, routine declarations, type declarations, etc. This means that the following code now does not compile:
* Added syntax for additional parameters to Markdown code blocks:
```nim test="nim c $1"
...
```
## C++ interop enhancements
Nim 2.0 takes C++ interop to the next level. With the new [virtual](https://nim-lang.github.io/Nim/manual_experimental.html#virtual-pragma) pragma and the extended [constructor](https://nim-lang.github.io/Nim/manual_experimental.html#constructor-pragma) pragma.
Now one can define constructors and virtual procs that maps to C++ constructors and virtual methods, allowing one to further customize
the interoperability. There is also extended support for the [codeGenDecl](https://nim-lang.org/docs/manual.html#implementation-specific-pragmas-codegendecl-pragma) pragma, so that it works on types.
It's a common pattern in C++ to use inheritance to extend a library. Some even use multiple inheritance as a mechanism to make interfaces.
Consider the following example:
```cpp
struct Base {
int someValue;
Base(int inValue) {
someValue = inValue;
};
};
class IPrinter {
public:
virtual void print() = 0;
};
```
```nim
type
Base* {.importcpp, inheritable.} = object
someValue*: int32
IPrinter* {.importcpp.} = object
const objTemplate = """
struct $1 : public $3, public IPrinter {
$2
};
""";
type NimChild {.codegenDecl: objTemplate .} = object of Base
echo "It calls the base constructor passing " & $this.someValue
this.someValue = val * 2 # Notice how we can access `this` inside the constructor. It's of the type `ptr NimChild`.
proc print*(self: NimChild) {.virtual.} =
echo "Some value is " & $self.someValue
let child = makeNimChild(10)
child.print()
```
It outputs:
```
It calls the base constructor passing 10
Some value is 20
```
## ARC/ORC refinements
With the 2.0 release, the ARC/ORC model got refined once again and is now finally complete:
1. Programmers now have control over the "item was moved from" state as `=wasMoved` is overridable.
2. There is a new `=dup` hook which is more efficient than the old combination of `=wasMoved(tmp); =copy(tmp, x)` operations.
3. Destructors now take a parameter of the attached object type `T` directly and don't have to take a `var T` parameter.
With these important optimizations we improved the runtime of the compiler and important benchmarks by 0%! Wait ... what?
Yes, unfortunately it turns out that for a modern optimizer like in GCC or LLVM there is no difference.
But! This refined model is more efficient once separate compilation enters the picture. In other words, as we think of
providing a stable ABI it is important not to lose any efficiency in the calling conventions.
## Tool changes
- Nim now ships Nimble version 0.14 which added support for lock-files. Libraries are stored in `$nimbleDir/pkgs2` (it was `$nimbleDir/pkgs` before). Use `nimble develop --global` to create an old style link file in the special links directory documented at https://github.com/nim-lang/nimble#nimble-develop.
- nimgrep now offers the option `--inContext` (and `--notInContext`), which
allows to filter only matches with the context block containing a given pattern.
- nimgrep: names of options containing "include/exclude" are deprecated,
e.g. instead of `--includeFile` and `--excludeFile` we have
`--filename` and `--notFilename` respectively.
Also, the semantics are now consistent for such positive/negative filters.
- Nim now ships with an alternative package manager called Atlas. More on this in upcoming versions.
## Porting guide
### Block and Break
Using an unnamed break in a block is deprecated. This warning will become an error in future versions! Use a named block with a named break instead. In other words, turn:
```nim
block:
a()
if cond:
break
b()
```
Into:
```nim
block maybePerformB:
a()
if cond:
break maybePerformB
b()
```
### Strict funcs
The definition of `"strictFuncs"` was changed.
The old definition was roughly: "A store to a ref/ptr deref is forbidden unless it's coming from a `var T` parameter".
The new definition is: "A store to a ref/ptr deref is forbidden."
This new definition is much easier to understand, the price is some expressitivity. The following code used to be
accepted:
```nim
{.experimental: "strictFuncs".}
type Node = ref object
s: string
func create(s: string): Node =
result = Node()
result.s = s # store to result[]
```
Now it has to be rewritten to:
```nim
{.experimental: "strictFuncs".}
type Node = ref object
s: string
func create(s: string): Node =
result = Node(s: s)
```
### Standard library
Several standard library modules have been moved to nimble packages, use `nimble` or `atlas` to install them:
- ORC is now the default memory management strategy. Use
`--mm:refc` for a transition period.
- The `threads:on` option is now the default.
-`httpclient.contentLength` default to `-1` if the Content-Length header is not set in the response. It follows Apache's `HttpClient` (Java), `http` (go) and .NET `HttpWebResponse` (C#) behaviors. Previously it raised a `ValueError`.
-`addr` is now available for all addressable locations,
`unsafeAddr` is now deprecated and an alias for `addr`.
- Certain definitions from the default `system` module have been moved to
the following new modules:
-`std/syncio`
-`std/assertions`
-`std/formatfloat`
-`std/objectdollar`
-`std/widestrs`
-`std/typedthreads`
-`std/sysatomics`
In the future, these definitions will be removed from the `system` module,
and their respective modules will have to be imported to use them.
Currently, to make these imports required, the `-d:nimPreviewSlimSystem` option
may be used.
- Enabling `-d:nimPreviewSlimSystem` also removes the following deprecated
symbols in the `system` module:
- Aliases with an `Error` suffix to exception types that have a `Defect` suffix
(see [exceptions](https://nim-lang.github.io/Nim/exceptions.html)):
- Enabling `-d:nimPreviewSlimSystem` removes the import of `channels_builtin` in
in the `system` module, which is replaced by [threading/channels](https://github.com/nim-lang/threading/blob/master/threading/channels.nim). Use the command `nimble install threading` and import `threading/channels`.
- Enabling `-d:nimPreviewCstringConversion` causes `ptr char`, `ptr array[N, char]` and `ptr UncheckedArray[N, char]` to not support conversion to `cstring` anymore.
- Enabling `-d:nimPreviewProcConversion` causes `proc` to not support conversion to
`pointer` anymore. `cast` may be used instead.
- The `gc:v2` option is removed.
- The `mainmodule` and `m` options are removed.
- Optional parameters in combination with `: body` syntax ([RFC #405](https://github.com/nim-lang/RFCs/issues/405))
are now opt-in via `experimental:flexibleOptionalParams`.
- Automatic dereferencing (experimental feature) is removed.
- The `Math.trunc` polyfill for targeting Internet Explorer was
previously included in most JavaScript output files.
Now, it is only included with `-d:nimJsMathTruncPolyfill`.
If you are targeting Internet Explorer, you may choose to enable this option
or define your own `Math.trunc` polyfill using the [`emit` pragma](https://nim-lang.org/docs/manual.html#implementation-specific-pragmas-emit-pragma).
Nim uses `Math.trunc` for the division and modulo operators for integers.
-`shallowCopy` and `shallow` are removed for ARC/ORC. Use `move` when possible or combine assignment and
`sink` for optimization purposes.
- The experimental `nimPreviewDotLikeOps` switch is going to be removed or deprecated because it didn't fulfill its promises.
- The `{.this.}` pragma, deprecated since 0.19, has been removed.
-`nil` literals can no longer be directly assigned to variables or fields of `distinct` pointer types. They must be converted instead.
```nim
type Foo = distinct ptr int
# Before:
var x: Foo = nil
# After:
var x: Foo = Foo(nil)
```
- Removed two type pragma syntaxes deprecated since 0.20, namely
- `foo a = b` now means `foo(a = b)` rather than `foo(a) = b`. This is consistent
with the existing behavior of `foo a, b = c` meaning `foo(a, b = c)`.
This decision was made with the assumption that the old syntax was used rarely;
if your code used the old syntax, please be aware of this change.
- [Overloadable enums](https://nim-lang.github.io/Nim/manual.html#overloadable-enum-value-names) and Unicode Operators
are no longer experimental.
- `macros.getImpl` for `const` symbols now returns the full definition node
(as `nnkConstDef`) rather than the AST of the constant value.
- Lock levels are deprecated, now a noop.
- `strictEffects` are no longer experimental.
Use `legacy:laxEffects` to keep backward compatibility.
- The `gorge`/`staticExec` calls will now return a descriptive message in the output
if the execution fails for whatever reason. To get back legacy behaviour, use `-d:nimLegacyGorgeErrors`.
- Pointer to `cstring` conversions now trigger a `[PtrToCstringConv]` warning.
This warning will become an error in future versions! Use a `cast` operation
like `cast[cstring](x)` instead.
- `logging` will default to flushing all log level messages. To get the legacy behaviour of only flushing Error and Fatal messages, use `-d:nimV1LogFlushBehavior`.
- Redefining templates with the same signature was previously
allowed to support certain macro code. To do this explicitly, the
`{.redefine.}` pragma has been added. Note that this is only for templates.
Implicit redefinition of templates is now deprecated and will give an error in the future.
- Using an unnamed break in a block is deprecated. This warning will become an error in future versions! Use a named block with a named break instead.
- Several Standard libraries have been moved to nimble packages, use `nimble` to install them:
- `std/punycode` => `punycode`
- `std/asyncftpclient` => `asyncftpclient`
- `std/smtp` => `smtp`
- `std/db_common` => `db_connector/db_common`
- `std/db_sqlite` => `db_connector/db_sqlite`
- `std/db_mysql` => `db_connector/db_mysql`
- `std/db_postgres` => `db_connector/db_postgres`
- `std/db_odbc` => `db_connector/db_odbc`
- `std/md5` => `checksums/md5`
- `std/sha1` => `checksums/sha1`
- `std/sums` => `std/sums`
- Previously, calls like `foo(a, b): ...` or `foo(a, b) do: ...` where the final argument of
`foo` had type `proc ()` were assumed by the compiler to mean `foo(a, b, proc () = ...)`.
This behavior is now deprecated. Use `foo(a, b) do (): ...` or `foo(a, b, proc () = ...)` instead.
- When `--warning[BareExcept]:on` is enabled, if an `except` specifies no exception or any exception not inheriting from `Defect` or `CatchableError`, a `warnBareExcept` warning will be triggered. For example, the following code will emit a warning:
```nim
try:
discard
except: # Warning: The bare except clause is deprecated; use `except CatchableError:` instead [BareExcept]
discard
```
- The experimental `strictFuncs` feature now disallows a store to the heap via a `ref` or `ptr` indirection.
- The underscore identifier (`_`) is now generally not added to scope when
used as the name of a definition. While this was already the case for
variables, it is now also the case for routine parameters, generic
parameters, routine declarations, type declarations, etc. This means that the following code now does not compile:
`defined(nimalias)` can be used to check for versions when this syntax was
available; however since code that used this syntax is usually very old,
these deprecated aliases are likely not used anymore and it may make sense
to simply remove these statements.
- `getProgramResult` and `setProgramResult` in `std/exitprocs` are no longer
declared when they are not available on the backend. Previously it would call
`doAssert false` at runtime despite the condition being checkable at compile-time.
- Custom destructors now supports non-var parameters, e.g. ``proc `=destroy`[T: object](x: T)`` is valid. ``proc `=destroy`[T: object](x: var T)`` is deprecated.
- Relative imports will not resolve to searched paths anymore, e.g. `import ./tables` now reports an error properly.
## Standard library additions and changes
[//]: # "Changes:"
- OpenSSL 3 is now supported.
- `macros.parseExpr` and `macros.parseStmt` now accept an optional
`filename` argument for more informative errors.
- The `colors` module is expanded with missing colors from the CSS color standard.
`colPaleVioletRed` and `colMediumPurple` have also been changed to match the CSS color standard.
- Fixed `lists.SinglyLinkedList` being broken after removing the last node ([#19353](https://github.com/nim-lang/Nim/pull/19353)).
- The `md5` module now works at compile time and in JavaScript.
- Changed `mimedb` to use an `OrderedTable` instead of `OrderedTableRef`, to support `const` tables.
- `strutils.find` now uses and defaults to `last = -1` for whole string searches,
making limiting it to just the first char (`last = 0`) valid.
- `strutils.split` and `strutils.rsplit` now return the source string as a single element for an empty separator.
- `random.rand` now works with `Ordinal`s.
- Undeprecated `os.isvalidfilename`.
- `std/oids` now uses `int64` to store time internally (before, it was int32).
- `std/uri.Uri` dollar (`$`) improved, precalculates the `string` result length from the `Uri`.
- `std/uri.Uri.isIpv6` is now exported.
- `std/logging.ConsoleLogger` and `FileLogger` now have a `flushThreshold` attribute to set what log message levels are automatically flushed. For Nim v1 use `-d:nimFlushAllLogs` to automatically flush all message levels. Flushing all logs is the default behavior for Nim v2.
- `std/jsfetch.newFetchOptions` now has default values for all parameters.
- `std/jsformdata` now accepts the `Blob` data type.
- `std/sharedlist` and `std/sharedtables` are now deprecated, see [RFC #433](https://github.com/nim-lang/RFCs/issues/433).
- There is a new compile flag (`-d:nimNoGetRandom`) when building `std/sysrand` to remove the dependency on the Linux `getrandom` syscall.
This compile flag only affects Linux builds and is necessary if either compiling on a Linux kernel version < 3.17, or if code built will be executing on kernel < 3.17.
On Linux kernels < 3.17 (such as kernel 3.10 in RHEL7 and CentOS7), the `getrandom` syscall was not yet introduced. Without this, the `std/sysrand` module will not build properly, and if code is built on a kernel >= 3.17 without the flag, any usage of the `std/sysrand` module will fail to execute on a kernel < 3.17 (since it attempts to perform a syscall to `getrandom`, which isn't present in the current kernel). A compile flag has been added to force the `std/sysrand` module to use /dev/urandom (available since Linux kernel 1.3.30), rather than the `getrandom` syscall. This allows for use of a cryptographically secure PRNG, regardless of kernel support for the `getrandom` syscall.
When building for RHEL7/CentOS7 for example, the entire build process for nim from a source package would then be:
```sh
$ yum install devtoolset-8 # Install GCC version 8 vs the standard 4.8.5 on RHEL7/CentOS7. Alternatively use -d:nimEmulateOverflowChecks. See issue #13692 for details
$ scl enable devtoolset-8 bash # Run bash shell with default toolchain of gcc 8
$ sh build.sh # per unix install instructions
$ bin/nim c koch # per unix install instructions
$ ./koch boot -d:release # per unix install instructions
$ ./koch tools -d:nimNoGetRandom # pass the nimNoGetRandom flag to compile std/sysrand without support for getrandom syscall
```
This is necessary to pass when building Nim on kernel versions < 3.17 in particular to avoid an error of "SYS_getrandom undeclared" during the build process for the stdlib (`sysrand` in particular).
[//]: # "Additions:"
- Added ISO 8601 week date utilities in `times`:
- Added `IsoWeekRange`, a range type for weeks in a week-based year.
- Added `IsoYear`, a distinct type for a week-based year in contrast to a regular year.
- Added an `initDateTime` overload to create a `DateTime` from an ISO week date.
- Added `getIsoWeekAndYear` to get an ISO week number and week-based year from a datetime.
- Added `getIsoWeeksInYear` to return the number of weeks in a week-based year.
- Added new modules which were previously part of `std/os`:
- Added `std/oserrors` for OS error reporting.
- Added `std/envvars` for environment variables handling.
- Added `std/cmdline` for reading command line parameters.
- Added `std/paths`, `std/dirs`, `std/files`, `std/symlinks` and `std/appdirs`.
- Added `sep` parameter in `std/uri` to specify the query separator.
- Added `UppercaseLetters`, `LowercaseLetters`, `PunctuationChars`, `PrintableChars` sets to `std/strutils`.
- Added `complex.sgn` for obtaining the phase of complex numbers.
- Added `capacity` for `string` and `seq` to return the current capacity, see [RFC #460](https://github.com/nim-lang/RFCs/issues/460).
- Added `openArray[char]` overloads for `std/parseutils` and `std/unicode`, allowing for more code reuse.
- Added a `safe` parameter to `base64.encodeMime`.
- Added `parseutils.parseSize` - inverse to `strutils.formatSize` - to parse human readable sizes.
- Added `minmax` to `sequtils`, as a more efficient `(min(_), max(_))` over sequences.
- `std/jscore` for the JavaScript target:
+ Added bindings to [`Array.shift`](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Array/shift)
and [`queueMicrotask`](https://developer.mozilla.org/en-US/docs/Web/API/queueMicrotask).
+ Added `toDateString`, `toISOString`, `toJSON`, `toTimeString`, `toUTCString` converters for `DateTime`.
- Added `BackwardsIndex` overload for `CacheSeq`.
- Added support for nested `with` blocks in `std/with`.
- Added `ensureMove` to the system module. It ensures that the passed argument is moved, otherwise an error is given at the compile time.
[//]: # "Deprecations:"
- Deprecated `selfExe` for Nimscript.
- Deprecated `std/base64.encode` for collections of arbitrary integer element type.
Now only `byte` and `char` are supported.
[//]: # "Removals:"
- Removed deprecated module `parseopt2`.
- Removed deprecated module `sharedstrings`.
- Removed deprecated module `dom_extensions`.
- Removed deprecated module `LockFreeHash`.
- Removed deprecated module `events`.
- Removed deprecated `oids.oidToString`.
- Removed define `nimExperimentalAsyncjsThen` for `std/asyncjs.then` and `std/jsfetch`.
- Removed deprecated `jsre.test` and `jsre.toString`.
- Removed deprecated `math.c_frexp`.
- Removed deprecated `` httpcore.`==` ``.
- Removed deprecated `std/posix.CMSG_SPACE` and `std/posix.CMSG_LEN` that take wrong argument types.
- Removed deprecated `osproc.poDemon`, symbol with typo.
- Removed deprecated `tables.rightSize`.
- Removed deprecated `posix.CLONE_STOPPED`.
## Language changes
- [Tag tracking](https://nim-lang.github.io/Nim/manual.html#effect-system-tag-tracking) now supports the definition of forbidden tags by the `.forbids` pragma
which can be used to disable certain effects in proc types.
- [Case statement macros](https://nim-lang.github.io/Nim/manual.html#macros-case-statement-macros) are no longer experimental,
meaning you no longer need to enable the experimental switch `caseStmtMacros` to use them.
- Full command syntax and block arguments i.e. `foo a, b: c` are now allowed
for the right-hand side of type definitions in type sections. Previously
they would error with "invalid indentation".
- Compile-time define changes:
- `defined` now accepts identifiers separated by dots, i.e. `defined(a.b.c)`.
In the command line, this is defined as `-d:a.b.c`. Older versions can
use backticks as in ``defined(`a.b.c`)`` to access such defines.
- [Define pragmas for constants](https://nim-lang.github.io/Nim/manual.html#implementation-specific-pragmas-compileminustime-define-pragmas)
now support a string argument for qualified define names.
```nim
# -d:package.FooBar=42
const FooBar {.intdefine: "package.FooBar".}: int = 5
echo FooBar # 42
```
This was added to help disambiguate similar define names for different packages.
In older versions, this could only be achieved with something like the following:
```nim
const FooBar = block:
const `package.FooBar` {.intdefine.}: int = 5
`package.FooBar`
```
- A generic `define` pragma for constants has been added that interprets
the value of the define based on the type of the constant value.
See the [experimental manual](https://nim-lang.github.io/Nim/manual_experimental.html#generic-nimdefine-pragma)
- A new form of type inference called [top-down inference](https://nim-lang.github.io/Nim/manual_experimental.html#topminusdown-type-inference)
has been implemented for a variety of basic cases. For example, code like the following now compiles:
```nim
let foo: seq[(float, byte, cstring)] = @[(1, 2, "abc")]
```
- `cstring` is now accepted as a selector in `case` statements, removing the
need to convert to `string`. On the JS backend, this is translated directly
to a `switch` statement.
- Nim now supports `out` parameters and ["strict definitions"](https://nim-lang.github.io/Nim/manual_experimental.html#strict-definitions-and-nimout-parameters).
- Nim now offers a [strict mode](https://nim-lang.github.io/Nim/manual_experimental.html#strict-case-objects) for `case objects`.
- IBM Z architecture and macOS m1 arm64 architecture are supported.
- `=wasMoved` can now be overridden by users.
- There is a new pragma called [quirky](https://nim-lang.github.io/Nim/manual_experimental.html#quirky-routines) that can be used to affect the code
generation of goto based exception handling. It can improve the produced code size but its effects can be subtle so use it with care.
- Tuple unpacking for variables is now treated as syntax sugar that directly
expands into multiple assignments. Along with this, tuple unpacking for
- Added syntax for additional parameters to Markdown code blocks:
```nim test="nim c $1"
...
```
## Tool changes
- Nim now ships Nimble version 0.14 which added support for lock-files. Libraries are stored in `$nimbleDir/pkgs2` (it was `$nimbleDir/pkgs` before). Use `nimble develop --global` to create an old style link file in the special links directory documented at https://github.com/nim-lang/nimble#nimble-develop.
- nimgrep added the option `--inContext` (and `--notInContext`), which
allows to filter only matches with the context block containing a given pattern.
- nimgrep: names of options containing "include/exclude" are deprecated,
e.g. instead of `--includeFile` and `--excludeFile` we have
`--filename` and `--notFilename` respectively.
Also the semantics are now consistent for such positive/negative filters.
- koch now supports the `--skipIntegrityCheck` option. The command `koch --skipIntegrityCheck boot -d:release` always builds the compiler twice.
-`-d:nimStrictDelete` becomes the default. An index error is produced when the index passed to `system.delete` is out of bounds. Use `-d:nimAuditDelete` to mimic the old behavior for backward compatibility.
- The default user-agent in `std/httpclient` has been changed to `Nim-httpclient/<version>` instead of `Nim httpclient/<version>` which was incorrect according to the HTTP spec.
- Methods now support implementations based on a VTable by using `--experimental:vtables`. Methods are then confined to the same module where their type has been defined.
- With `-d:nimPreviewNonVarDestructor`, non-var destructors become the default.
- A bug where tuple unpacking assignment with a longer tuple on the RHS than the LHS was allowed has been fixed, i.e. code like:
```nim
var a, b: int
(a, b) = (1, 2, 3, 4)
```
will no longer compile.
- `internalNew` is removed from the `system` module, use `new` instead.
- `bindMethod` in `std/jsffi` is deprecated, don't use it with closures.
- JS backend now supports lambda lifting for closures. Use `--legacy:jsNoLambdaLifting` to emulate old behaviors.
- JS backend now supports closure iterators.
- `owner` in `std/macros` is deprecated.
- Ambiguous type symbols in generic procs and templates now generate symchoice nodes.
Previously; in templates they would error immediately at the template definition,
and in generic procs a type symbol would arbitrarily be captured, losing the
information of the other symbols. This means that generic code can now give
errors for ambiguous type symbols, and macros operating on generic proc AST
may encounter symchoice nodes instead of the arbitrarily resolved type symbol nodes.
- Partial generic instantiation of routines is no longer allowed. Previously
it compiled in niche situations due to bugs in the compiler.
- `const` values now open a new scope for each constant, meaning symbols
declared in them can no longer be used outside or in the value of
other constants.
```nim
const foo = (var a = 1; a)
const bar = a # error
let baz = a # error
```
- The following POSIX wrappers have had their types changed from signed to
unsigned types on OSX and FreeBSD/OpenBSD to correct codegen errors:
- `Gid` (was `int32`, is now `uint32`)
- `Uid` (was `int32`, is now `uint32`)
- `Dev` (was `int32`, is now `uint32` on FreeBSD)
- `Nlink` (was `int16`, is now `uint32` on OpenBSD and `uint16` on OSX/other BSD)
- `sin6_flowinfo` and `sin6_scope_id` fields of `Sockaddr_in6`
(were `int32`, are now `uint32`)
- `n_net` field of `Tnetent` (was `int32`, is now `uint32`)
- The `Atomic[T]` type on C++ now uses C11 primitives by default instead of
`std::atomic`. To use `std::atomic` instead, `-d:nimUseCppAtomics` can be defined.
## Standard library additions and changes
[//]: # "Changes:"
- Changed `std/osfiles.copyFile` to allow specifying `bufferSize` instead of a hard-coded one.
- Changed `std/osfiles.copyFile` to use `POSIX_FADV_SEQUENTIAL` hints for kernel-level aggressive sequential read-aheads.
- `std/htmlparser` has been moved to a nimble package, use `nimble` or `atlas` to install it.
- Changed `std/os.copyDir` and `copyDirWithPermissions` to allow skipping special "file" objects like FIFOs, device files, etc on Unix by specifying a `skipSpecial` parameter.
[//]: # "Additions:"
- Added `newStringUninit` to the `system` module, which creates a new string of length `len` like `newString` but with uninitialized content.
- Added `setLenUninit` to the `system` module, which doesn't initialize
slots when enlarging a sequence.
- Added `hasDefaultValue` to `std/typetraits` to check if a type has a valid default value.
- Added `rangeBase` to `std/typetraits` to obtain the base type of a range type or
convert a value with a range type to its base type.
- Added Viewport API for the JavaScript targets in the `dom` module.
- Added `toSinglyLinkedRing` and `toDoublyLinkedRing` to `std/lists` to convert from `openArray`s.
- ORC: To be enabled via `nimOrcStats` there is a new API called `GC_orcStats` that can be used to query how many
objects the cyclic collector did free. If the number is zero that is a strong indicator that you can use `--mm:arc`
instead of `--mm:orc`.
- A `$` template is provided for `Path` in `std/paths`.
- `std/hashes.hash(x:string)` changed to produce a 64-bit string `Hash` (based
on Google's Farm Hash) which is also often faster than the present one. Define
`nimStringHash2` to get the old values back. `--jsbigint=off` mode always only
produces the old values. This may impact your automated tests if they depend
on hash order in some obvious or indirect way. Using `sorted` or `OrderedTable`
is often an easy workaround.
[//]: # "Deprecations:"
- Deprecates `system.newSeqUninitialized`, which is replaced by `newSeqUninit`.
[//]: # "Removals:"
## Language changes
- `noInit` can be used in types and fields to disable member initializers in the C++ backend.
- C++ custom constructors initializers see https://nim-lang.org/docs/manual_experimental.html#constructor-initializer
- `member` can be used to attach a procedure to a C++ type.
- C++ `constructor` now reuses `result` instead creating `this`.
- Tuple unpacking changes:
- Tuple unpacking assignment now supports using underscores to discard values.
```nim
var a, c: int
(a, _, c) = (1, 2, 3)
```
- Tuple unpacking variable declarations now support type annotations, but
warnRstLanguageXNotSupported:"language '$1' not supported",
warnRstFieldXNotSupported:"field '$1' not supported",
warnRstUnusedImportdoc:"importdoc for '$1' is not used",
warnRstStyle:"RST style: $1",
warnCommentXIgnored:"comment '$1' ignored",
warnTypelessParam:"",# deadcode
@@ -150,7 +175,7 @@ const
warnUninit:"use explicit initialization of '$1' for clarity",
warnGcMem:"'$1' uses GC'ed memory",
warnDestructor:"usage of a type with a destructor in a non destructible context. This will become a compile time error in the future.",
warnLockLevel:"$1",
warnLockLevel:"$1",# deadcode
warnResultShadowed:"Special variable 'result' is shadowed.",
warnInconsistentSpacing:"Number of spaces around '$#' is not consistent",
warnCaseTransition:"Potential object case transition, instantiate new object instead",
@@ -164,13 +189,23 @@ const
warnAnyEnumConv:"$1",
warnHoleEnumConv:"$1",
warnCstringConv:"$1",
warnPtrToCstringConv:"unsafe conversion to 'cstring' from '$1'; Use a `cast` operation like `cast[cstring](x)`; this will become a compile time error in the future",
warnEffect:"$1",
warnCastSizes:"$1",# deadcode
warnAboveMaxSizeSet:"$1",
warnImplicitTemplateRedefinition:"template '$1' is implicitly redefined; this is deprecated, add an explicit .redefine pragma",
warnUnnamedBreak:"Using an unnamed break in a block is deprecated; Use a named block with a named break instead",
warnStmtListLambda:"statement list expression assumed to be anonymous proc; this is deprecated, use `do (): ...` or `proc () = ...` instead",
warnBareExcept:"$1",
warnImplicitDefaultValue:"$1",
warnIgnoredSymbolInjection:"$1",
warnStdPrefix:"$1 needs the 'std' prefix",
warnUser:"$1",
warnGlobalVarConstructorTemporary:"global variable '$1' initialization requires a temporary variable",
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
